Answer: 4 batches of fudge brownies and 1 batch of peanut butter brownies were made.
Step-by-step explanation:
Let x be the number of batches of fudge brownies made, and y be the number of batches of peanut butter brownies made.
From the problem, we can write two equations based on the information given:
Each batch of fudge brownies makes 1 pan: x = number of pans of fudge brownies.
Each batch of peanut butter brownies makes 9 pans: 9y = number of pans of peanut butter brownies.
We also know that the class made 5 batches in total, and ended up with 29 pans:
x + 9y = 29 (total number of pans)
We can now solve for x and y by using a system of two equations:
x + 9y = 29 (equation 1)
x + y = 5 (equation 2)
Solving for x in equation 2 and substituting into equation 1, we get:
(5 - y) + 9y = 29
Simplifying and solving for y:
8y = 24
y = 3
Substituting y = 3 into equation 2, we get:
x + 3 = 5
x = 2
Therefore, the class made 2 batches of fudge brownies (2 pans) and 1 batch of peanut butter brownies (9 pans), for a total of 29 pans. Alternatively, we can say that the class made 4 batches of fudge brownies (4 pans) and 1 batch of peanut butter brownies (9 pans) for a total of 29 pans.
5. Solve the following problems. Note: In those problems the geometric multiplicity is less than algebraic multiplicity. (a)d/ dx = ( 1 −44 −7) x2−30
Answer:
-130
Step-by-step explanation:
Researchers want to determine whether drivers are significantly more distracted while driving when using a cell phone than when talking to a passenger in the car. In a study involving 48 people, 24 people were randomly assigned to drive in a driving simulator while using a cell phone. The remaining 24 were assigned to drive in the driving simulator while talking to a passenger in the simulator. Part of the driving simulation for both groups involved asking drivers to exit the freeway at a particular exit. In the study, 7 of the 24 cell phone users missed the exit, while 2 of the 24 talking to a passenger missed the exit. (a) Would this study be classified as an experiment or an observational study? Provide an explanation to support your answer. (b) State the null and alternative hypotheses of interest to the researchers. H0: Ha: (c) One test of significance that you might consider using to answer the researchers’ question is a two-proportion z-test. State the conditions required for this test to be appropriate. Then comment on whether each condition is met. (d) Using an advanced statistical method for small samples to test the hypotheses in part (b), the researchers report a p−value of 0.0683. Interpret, in everyday language, what this p−value measures in the context of this study and state what conclusion should be made based on this p−value.
The lower the p-value, the more likely it is that the results are not due to chance. In this case, the p-value is 0.0683 This means that the researchers can conclude that drivers are significantly more distracted while driving when using a cell phone than when talking to a passenger in the car.
There is a difference in the proportion of drivers who missed the exit between the two groups.
The conditions required for a two-proportion z-test to be appropriate include that the data is collected independently, both groups are independent, the data should come from a normal population, and the sample sizes should be greater than 10.
The data was collected independently, both groups are independent, and the sample sizes are greater than 10. Therefore, these conditions are met. It is not clear if the data is from a normal population or not, but the test can still be used if the sample sizes are large enough.
The p-value of 0.0683 measures the probability that the results observed are due to chance. Therefore ,the lower the p-value, the more likely it is that the results are not due to chance.
In this case, the p-value is 0.0683, which is considered to be a small enough value that it indicates a statistically significant difference between the two groups.
for such more questions on probability
https://brainly.com/question/13604758
#SPJ11
In an introductory psychology class with n = 50 students, there are 9 freshman males, 15 freshman females, 8 sophomore males, 12 sophomore females, and 6 junior females. A random sample of n = 2 students is selected from the class. If the first student in the sample is a male, what is the probability that the second student will also be a male?
a. 8/14
b. 12/20
c. 20/44
d. 20/50
Answer: Total number of males= C
Step-by-step explanation:
Anna wants to make 30 mL of a 60 percent salt solution by mixing togethera 72 percent salt solution and a 54 percent salt solution. How much of each solution should dhe use
Anna should use 10 mL of the 72% salt solution and 20 mL of the 54% salt solution to make 30 mL of a 60% salt solution
Let's assume that Anna will use x mL of the 72% salt solution, and therefore she will use (30 - x) mL of the 54% salt solution (since the total volume is 30 mL).
To find out how much of each solution Anna should use, we can set up an equation based on the amount of salt in each solution.
The amount of salt in x mL of 72% salt solution is
= 0.72x
The amount of salt in (30 - x) mL of 54% salt solution is
= 0.54(30 - x)
To make a 60% salt solution, the total amount of salt in the final solution should be
0.6(30) = 18
So we can set up an equation
0.72x + 0.54(30 - x) = 1
Simplifying the equation
0.72x + 16.2 - 0.54x = 18
0.18x = 1.8
x = 10 ml
Learn more about equation here
brainly.com/question/17156168
#SPJ4
the primary purpose of statistical analysis is to: group of answer choices transform information into data.
The primary purpose of statistical analysis is to transform information into data. Therefore, the correct option is a)transform information into data.
What is statistical analysis?Statistical analysis is the method of using statistical techniques to collect and analyze data, evaluate its reliability and determine its statistical significance. The following are the primary purposes of statistical analysis:Provide summaries and descriptions of data: One of the most important applications of statistical analysis is to present data in a clear and concise manner. Summarizing the data can assist people in making sense of the data and drawing inferences from it.
For example, data can be summarized using graphs, charts, or tables. Identify patterns and relationships: The goal of statistical analysis is to identify any patterns or relationships that exist within the data. For example, statistical analysis can be used to determine if a product's sales are correlated with a specific time of year.
Test hypotheses and draw conclusions: Statistical analysis is used to test hypotheses and draw conclusions about a population or phenomenon. This is accomplished by using statistical techniques to determine whether or not the data supports a particular hypothesis. Statistical analysis can also be used to determine the probability of an event occurring in the future.
The primary purpose of statistical analysis is to transform information into data. Therefore, the correct option is a)transform information into data.
The complete question is as follows:
The primary purpose of statistical analysis is to:
a)transform information into data.
b)select samples and make inferences about populations
c)convert data into useful desicion-making information
d)perform statistical computations
See more about statistical analysis at: https://brainly.com/question/14724376
#SPJ11
a bin can hold 28 pounds. each toy car weighs 7 ounces. how many toy cars can the bin hold? (2 points) 64 toy cars 72 toy cars 88 toy cars 92 toy cars
A bin can hold 28 pounds. each toy car weighs 7 ounces., so the bin can hold 64 toy cars.
How to determine the number of toy carsTo determine the number of toy cars the bin can hold, we must first convert the weight limit of the bin and the weight of the toy cars to a uniform unit of measure.
We'll then divide the weight limit of the bin by the weight of one toy car. After that, we'll multiply the resulting value by the number of ounces in one pound (16).
Here's how to solve the problem:
1 pound = 16 ounces
Therefore, a bin that can hold 28 pounds can hold:28 × 16 = 448 Ounces
The weight of one toy car is 7 ounces.
Divide the weight limit of the bin (448 ounces) by the weight of one toy car (7 ounces):
448 ÷ 7 = 64
Therefore, the bin can hold 64 toy cars.
Learn more about weight limit at
https://brainly.com/question/14375094
#SPJ11
Identify the fallacies of relevance committed by the following arguments, giving a brief explanation for your answer. If no fallacy is committed, write "no fallacy". Surely you welcome the opportunity to join our protective organization. Think of all the money you will lose from broken windows, overturned trucks, and damaged merchandise in the event of your not joining.
There are no fallacies of relevance committed by the given argument.
The following arguments commits fallacy: argumentum ad baculum. Argumentum ad baculum is a Latin phrase which means argument from a stick or appeal to force. It is a type of logical fallacy in which someone tries to persuade another person by using threats of force or coercion rather than using evidence or reasoning.
The above statement is an example of the argumentum ad baculum fallacy as it tries to use fear to convince people to join their protective organization. They are using the threat of potential losses to convince people to join. It is a manipulative strategy that attempts to scare people into joining by threatening the safety of their business.No fallacy is committed. There are no fallacies of relevance committed by the given argument.
Learn more about Fallacies
brainly.com/question/14669739
#SPJ11
3. When x = 6, which number is closest to the value of y on the line of best fit in the graph below?
09
01
07
10
0987
65
432
2
1
➤X
0 1 2 3 4 5 6 7 8 9 10
Answer:
9
Step-by-step explanation:
I need help please show your work
Answer:
The 2nd equation is false.
Step-by-step explanation:
You don't even have to solve. DE is not 58, it's 40.
The 2nd equation is false.
The food service manager conducted a random survey of 200 students to determine their preference for new lunch menu items. There are 1,500 students in the school. Select all the manager’s predictions that are supported by the data
There are several predictions that the food service manager may make based on the data from the survey of 200 students regarding their preference for new lunch menu items. Let's examine some of these predictions and see if they are supported by the data.
The majority of students will like the new menu items.
The food service manager may predict that the majority of students in the school will like the new menu items, based on the positive responses from the 200 surveyed students. However, it's important to note that the sample size of 200 is relatively small compared to the total student population of 1,500. Therefore, it's possible that the preferences of the 200 surveyed students may not be representative of the preferences of the entire student population. To make a more accurate prediction, the manager may need to conduct a larger survey or pilot program to test the new menu items with a larger group of students.
Certain menu items will be more popular than others.
Based on the survey data, the food service manager may be able to identify which new menu items are more popular among the surveyed students. For example, if a majority of students indicate that they would like to see more vegetarian options, the manager may predict that introducing more vegetarian menu items will be popular among the broader student population. However, it's important to keep in mind that the preferences of the 200 surveyed students may not be representative of the preferences of the entire student population, so the manager may need to conduct additional research or testing to confirm these predictions.
The introduction of new menu items will increase overall satisfaction with the school lunch program.
If the survey data shows that a significant number of students are excited about the new menu items, the food service manager may predict that introducing these items will increase overall satisfaction with the school lunch program. However, it's important to note that satisfaction is a complex concept that can be influenced by many factors beyond just the menu items, such as the quality of service, cleanliness of the cafeteria, and overall atmosphere. Therefore, the manager may need to consider these other factors when predicting the impact of the new menu items on overall satisfaction with the lunch program.
In summary, while the data from the survey of 200 students can provide valuable insights into student preferences for new lunch menu items, it's important to interpret these results with caution and consider additional factors that may influence the broader student population. Conducting further research or testing can help to confirm these predictions and make more accurate decisions about the school lunch program.
To know more about larger click here:
brainly.com/question/25009162
#SPJ4
please help i have been trying to get an answer for 5+ hours
How is the quotient of 556 and 16 determined using an area model?
Enter your answers in the boxes to complete the equations. Your final answer should be a mixed number in simplest form.
Answer:
To use an area model to determine the quotient of 556 and 16, we can divide a rectangle of area 556 into 16 equal parts. Each part will have an area of 556/16.
We can start by dividing 556 into 16 groups of 10 (160), and then into 16 groups of 3 (48). That leaves us with a remainder of 4.
So we have:
556 = 16 x 34 + 48 + 4
This shows that 556 can be written as 16 times some whole number (34) plus a remainder of 48 + 4/16.
Simplifying the remainder, we have:
48 + 4/16 = 48 + 1/4 = 48.25
Therefore, the quotient of 556 and 16 is:
556/16 = 34 1/4
The quotient of 556 and 16 using an area model can be determined by producing a rectangle with the total area of 556 and one side of 16. The length of the other side will be the quotient. In this case, the quotient is 34 3/4.
Explanation:When asked to determine the quotient of 556 and 16 using the area model, one way to think of this is making a rectangle. The total area is 556 and one side is 16. The length of the other side will be the quotient.
Start by first estimating how many times 16 could fit into 556. Let's take 30 as an estimate, because 30*16 = 480, which is relatively close to 556. Draw a rectangle with the width of 16 and the length of 30.
Find the difference between the rectangle's area and 556. So, 556 - 480 = 76. Now, 76 is our remaining area to fill. 16 goes into 76 four more times, adding up to 64.
There is still a leftover area, which is 76-64 = 12. This is smaller than our width of 16. So, your final answer is 34 12/16 or 34 3/4 in simplest form.
Learn more about Area Model here:https://brainly.com/question/18472914
#SPJ2
If P = 2y² + 4xy + 4
Q = − 3y² + 7 - 3xy
R=- 3xy + 8
Find P+Q=R.
Answer:
P = [tex]2y^{2}[/tex] + 4xy +4
Q = [tex]-3y^{2}[/tex] + 7 -3xy
R = -3xy +8
Step-by-step explanation:
ABCD is a quadrilateral A) Calculate the value of x. B) When ABCD is drawn to scale, would the lines AD and BC be parallel or not? You must justify your answer without using a scale drawing
A) The value of x = 45 degrees
B) Lines AD and BC are not parallel when ABCD is drawn to scale.
To solve this problem, we can use the fact that the sum of the angles in a quadrilateral is 360 degrees.
A) angle A + angle B + angle C + angle D = 360
2x + 90 + x + 3x = 360
6x + 90 = 360
6x = 270
x = 45
Therefore, x = 45 degrees.
B) To determine if lines AD and BC are parallel, we can look at the opposite angles of the quadrilateral. If they are supplementary (add up to 180 degrees), then the lines are parallel.
angle A + angle C = 2x + x = 3x = 135 degrees
angle B + angle D = 90 + 3x = 90 + 135 = 225 degrees
Since angle A + angle C and angle B + angle D do not add up to 180 degrees, the opposite angles are not supplementary, and therefore, lines AD and BC are not parallel.
Learn more about quadrilateral here
brainly.com/question/9550663
#SPJ4
The given question is incomplete, the complete question is:
ABCD is a quadrilateral A) Calculate the value of x. B) When ABCD is drawn to scale, would the lines AD and BC be parallel or not?
If the GM between √2 and 2√2 is a find the value of a.
Answer:
If the GM between √2 and 2√2 is a find the value of a.
Step-by-step explanation:
To find the geometric mean between two numbers, we simply take the square root of their product.
In this case, we want to find the geometric mean between √2 and 2√2.
Their product is:
√2 * 2√2 = 2√4 = 2*2 = 4
So, the geometric mean between √2 and 2√2 is the square root of 4, which is:
√4 = 2
Therefore, the value of a is 2.
Which of the following represents vector vector t equals vector PQ in trigonometric form, where P (–13, 11) and Q (–18, 2)?
t = 10.296 sin 60.945°i + 10.296 cos 60.945°j
t = 10.296 sin 240.945°i + 10.296 cos 240.945°j
t = 10.296 cos 60.945°i + 10.296 sin 60.945°j
t = 10.296 cos 240.945°i + 10.296 sin 240.945°j
The correct answer is option (C).
What are the fundamental forms of trigonometry?Sine (sin), cosine (cos), tangent (tan), cosecant (csc), secant (sec), and cotangent are the six functions (cot).
The equation t = Q - P, where Q and P are the specified locations, can be used to determine the components of the vector t. Therefore:
t = (–18, 2) – (–13, 11) = (–18 + 13, 2 – 11) = (–5, –9) (–5, –9)
The vector's magnitude is given by:
|t| = √(–5)^2 + (–9)^2 = √106 ≈ 10.296
The formula = tan1 (y/x), where x and y are the vector's components, can be used to determine the direction of the vector t. The direction must be expressed in terms of sine and cosine functions because we are required to represent the vector in trigonometric form.
θ = tan⁻¹ (–9/–5) ≈ 60.945°
In trigonometric form, the vector t is thus represented as follows:
t = [t|cos|i] + [t|sin|j]
We get the following by altering the values of |t| and:
t = 10.296 cos I + 10.296 sin j of angle 60.945
As a result, the following is the proper trigonometric representation of the vector t:
t = 10.296 cos I + 10.296 sin j of angle 60.945
Thus, alternative is the right response (C).
To know more about Trignometric visit:
https://brainly.com/question/29076920
#SPJ1
Solve the following formula for t
S=12(V0+V1)t
Answer:
[tex]{ \rm{s = 12( v_{0} + v_{1} )t}} \\ \\{ \boxed { \rm{t = \frac{s}{12(v_{0} + v_{1})} \: \: }}}[/tex]
Q4.
The diagram shows a regular hexagon OABCDE.
a
E
OA = a
AB = b
M is the midpoint of OE.
N is the midpoint of AB.
(a) Find MN in terms of a and/or b.
b
B
D
Diagram NOT
accurately drawn
By answering the presented question, we may conclude that So, the Pythagorean theorem length of MN is expressed in terms of a and b.
What is Pythagorean theorem?Its Pythagorean theorem is just a fundamental mathematical principle that explains the connection between the sides of a triangle that is right. It asserts that the sum of the squares of both the widths of the other two sides is a square of both the width of the hypotenuse (the side facing the perfect angle) the side opposite the right angle). The mathematical mathematics is as follows: c2 = a2 + b2 At which "c" indicates the length of the right triangle and "a" and "b" reflect the extents of the additional two sides, started referring to as the legs.
Because M is the midpoint of OE and N is the midpoint of AB, we can draw a line segment connecting M and N that is parallel to OB and AE and perpendicular to AB.
the Pythagorean theorem
[tex]OE² = OX² + XE²OE²[/tex]
[tex](a + b/2)² + (2a - b/√3)²OE² = 7a²/4 + 3ab/2 + b²/4AN²[/tex]
[tex]AE² + EN²AN² = (2a√3)² + (b/2)²AN²[/tex]
[tex]12a² + b²/4MN² = AN² + AM²MN² \\\\ 12a² + b²/4 + (7a²/4 + 3ab/2 + b²/4)MN²\\\\19a²/2 + 3ab/2 + b²/2MN = √(19a²/2 + 3ab/2 + b²/2)[/tex]
So, the length of MN is expressed in terms of a and b.
To know more about Pythagorean theorem visit:
brainly.com/question/14930619
#SPJ1
(4) 2. Determine the exact answer for each of the calculations in question 2.1 above, by working out the errors caused by rounding, and compensating for them. 2.2.1. 723 + 586 2.2.2. 2850-1155
listed are 29 ages for academy award winning best actors in order from smallest to largest. 18; 21; 22; 25; 26; 27; 29; 30; 31; 33; 36; 37; 41; 42; 47; 52; 55; 57; 58; 62; 64; 67; 69; 71; 72; 73; 74; 76; 77 a. (5pts) find the score at the 20th percentile
The score at the 20th percentile is 27.
To find the score at the 20th percentile of the 29 ages for Academy Award winning best actors, follow the steps below:
Arrange the given ages from smallest to largest.
18; 21; 22; 25; 26; 27; 29; 30; 31; 33; 36; 37; 41; 42; 47; 52; 55; 57; 58; 62; 64; 67; 69; 71; 72; 73; 74; 76; 77
Determine the total number of data points
n = 29
Find the rank of the percentile
20th percentile = (20/100) * 29 = 5.8 = 6 (rounded to the nearest whole number).The rank of the percentile is 6.
Use the rank to determine the corresponding data value. The corresponding data value is the value at the 6th position when the data is arranged in ascending order. The score at the 20th percentile is 27.
To learn more about score at percentile refer :
https://brainly.com/question/14444761
#SPJ11
A research submarine dives at a speed of 100 ft/min directly toward the research lab. How long will it take the submarine to reach the lab from the surface of the ocean?
Can you explain why you got the answer too please
Answer:
The submarine travels 100 ft / min.
Step-by-step explanation:
To determine how long it will take the submarine to reach the lab from the surface of the ocean, we need to know how far it is from the surface of the ocean to the lab. Since this is not given, let us present the distance as D
The submarine travels at 100ft/min
He also travels a distance of D ft
Then the ratio below is correct:1/100 = x/Dx = D/100
Where the x is the time we want to find. If you have omitted the distance D by mistake, all you need to do is divide it by 100 to get the time you are looking for.
It will take 29.2 minutes in order for the submarine to reach the lab from the surface of the ocean.
Solution
To determine how long it will take the submarine to reach the lab from the surface of the ocean, we need to know how far it is from the surface of the ocean to the lab. Since this is not given, let us present the distance as D.
The submarine travels at 100ft/min
He also travels a distance of Dft
Then the ratio below is correct:
[tex]1/100 = x/D[/tex]
[tex]x = D/100[/tex]
Where x is the time we want to find.
If you have omitted the distance D by mistake, all you need to do is divide it by 100 to get the time you are looking for.
consider using a z test to test h0: p 5 .6. determine the p-value in each of the following situations. a. ha:p..6,z51.47 b. ha:p,.6,z522.70 c. ha:p?.6,z522.70 d. ha:p,.6,z5.25
a) P-value = P(z<1.47) = 0.9292.
b) P-value = P(z>2.70) = 0.0036.
c) P-value = 2 × P(z>2.70) = 0.0072.
d) P-value = P(z>2.5) = 0.0062.
Z-test is a statistical test for the null hypothesis, which refers to the population mean, where the population standard deviation is known. P-value represents the probability value for any hypothesis, where a small p-value indicates that the null hypothesis is less accurate.
P-value, for the given values of z-test is calculated as follows: a) For ha: p < .6, z=1.47The p-value for this hypothesis test is calculated as follows: P-value = P(z<1.47) = 0.9292. Therefore, the P-value is 0.9292. b) For ha: p > .6, z=2.70The p-value for this hypothesis test is calculated as follows.
P-value = P(z>2.70) = 0.0036. Therefore, the P-value is 0.0036.c) For ha: p ≠ .6, z=2.70The p-value for this hypothesis test is calculated as follows: P-value = 2 × P(z>2.70) = 0.0072.
Therefore, the P-value is 0.0072.d) For ha: p > .6, z=2.5The p-value for this hypothesis test is calculated as follows: P-value = P(z>2.5) = 0.0062. Therefore, the P-value is 0.0062.
Learn more about Z Test
brainly.com/question/15683598
#SPJ11
for h(x) = 4x-1, find h(0) and h(2)
Answer:
- 1 and 7
Step-by-step explanation:
to find h(0) substitute x = 0 into h(x)
h(0) = 4(0) - 1 = 0 - 1 = - 1
to find h2) substitute x = 2 into h(x)
h(2) = 4(2) - 1 = 8 - 1 = 7
I cant figure it out
4x - 4/4x² + x is the value of linear equation.
What in mathematics is a linear equation?
A linear equation is an algebraic equation of the form y=mx+b, where m is the slope and b is the y-intercept, and only a constant and a first-order (linear) term are included. The variables in the previous sentence, y and x, are referred to as a "linear equation with two variables" at times.
Equations with power 1 variables are known as linear equations. One example with only one variable is where ax+b = 0, where a and b are real values and x is the variable.
28x³ - 28x²/28x⁴ + 7x³
= 28x²( x - 1 )/7x³( 4x + 1)
= 4( x - 1)/x( 4x + 1)
= 4x - 4/4x² + x
Learn more about linear equation
brainly.com/question/11897796
#SPJ1
If the midpoint of 2 sides of a triangle are connected with a segment then
The Midpoint is the middle- point of the line member. The midpoint connecting two sides of a triangle is resemblant to the third side and half as long.
The midpoint is the middle of the line member. It's equidistant from both endpoints and is the centroid of the member and endpoints. Cut a member in two.
The midpoint theorem states that a line member drawn from the midpoint of two sides of a triangle is resemblant to the third side and half the length of the third side of the triangle.
The mean theorem helps us find the missing values for the sides of triangles. Connects the sides of a triangle with a line member drawn from the midpoints of two sides of the triangle.
To know more about Mid-point,
brainly.com/question/28443113
#SPJ4
Michelle asked 30 people entering a movie theater how many movies they had seen over the past year. Here are the results of her poll. 0, 5, 3, 2, 6, 8, 10, 12, 11, 16, 0, 3, 4, 7, 2, 0, 1, 9, 6, 4, 4, 8, 14, 16, 17, 18, 5, 3, 6, 8 (a) Create a frequency table for the data with 5 classes. (b) Create a histogram from your frequency table. Label the axes and give the histogram a title. Answer: (c) Number of movies Frequency
Part (a) of this sentence displays the frequency chart, and part (c) displays the histogram (b) .
what is histogram ?A graph that displays the distribution of a collection of continuous data is called a histogram. It is composed of a number of bars, each of which represents a set of values, and whose height denotes the frequency or number of data points that lie within a given range. Histograms are used to depict a distribution's shape, centre, and spread graphically. They are frequently used to find patterns and trends in data in areas like statistics, data analysis, and scientific study.
given
(A) We must first identify the data's range before dividing it into 5 intervals of equal width in order to construct a frequency table with 5 classes. The values are in the range of 0 to 18.
(b) We plot the class intervals on the x-axis and the frequency on the y-axis to generate a histogram from the frequency chart. The counts are used to illustrate how frequently each class interval occurs.
Part (a) of this sentence displays the frequency chart, and part (c) displays the histogram (b).
To know more about histogram visit :-
https://brainly.com/question/16819077
#SPJ1
This is a modification of A7 - Quadratic Approximation. Create a Matlab function called myta which takes four arguments in the form myta(f,n,a,b). Heref is a function handle, n is a nonnegative integer, and a and b are real numbers. The Matlab function should find the nth Taylor Polynomial to f(x) at x = a and plug in x = b, then it should return the absolute value of the difference between this value and f(b). The the nth Taylor Polynomial to f (x) is the function g(x) = f(a) + f'(a)(x – a) += f'(a)(x – a)? + 1 1 f''(a)(x – a)3 + + f(n)(a)(x – a)". 1 3! n! 3 Here are some samples of input and output for you to test your code. When you submit your code the inputs will be different. Here vpa is being used to show lots of digits
As we have defined the Matlab function called myta which takes four arguments in the form myta(f,n,a,b).
The purpose of the function is to find the nth Taylor polynomial of the function f(x) at x = a and evaluate it at x = b. Then, it should return the absolute value of the difference between this value and f(b).
Now that we have the nth Taylor polynomial of f(x) at x = a, we can evaluate it at x = b and calculate the absolute difference between this value and f(b).
function result = myta(f,n,a,b)
syms x; % define x as symbolic variable
g = f(a); % initialize g as f(a)
for i=1:n % iterate from 1 to n
deriv = diff(f,x,i-1); % calculate the ith derivative of f
term = deriv*(x-a)^(i-1)/factorial(i-1); % calculate the ith term of the Taylor series
g = g + term; % add the ith term to g
end
result = abs(g - f(b)); % calculate the absolute difference between g(b) and f(b)
end
This code calculates the absolute difference between g(b) and f(b) using the "abs" function and assigns it to the output variable "result".
To know more about function here
https://brainly.com/question/28193995
#SPJ4
We revisit a probabilistic model for a fault diagnosis problem from an earlier homework. The class variable C represents the health of a disk drive: C = 0 means it is operating normally; and C = 1 means it is in failed state. When the drive is running it continuously monitors itself using temperature and shock sensor, and records two binary features, X and Y. X =lif the drive has been subject to shock (e.g;, dropped) , and X = 0 otherwise Y =1if the drive temperature has ever been above 70*C, and Y = 0 otherwise. The following table defines the joint probability mass function of these three random variables: pxyc(r,y, c) 0.1 0.2 0.2 0 0 0 0 0 0 0.05 0.25
The probability of the disk drive being in a normal state is 0.5, and the probability of the disk drive being in a failed state is 0.3.
The given table represents the joint probability mass function of the random variables, pxyc (r, y, c). r, y, and c denote the temperature, shock sensor, and health status of the disk drive. The values of r, y, and c are binary.The joint probability mass function of three random variables r, y, and c can be represented as follows:pxyc (r, y, c)= P(r, y, c)Here,P(r=0, y=0, c=0)= 0.1, P(r=0, y=1, c=0)= 0.2, P(r=1, y=0, c=0)= 0.2,P(r=0, y=0, c=1)= 0, P(r=0, y=1, c=1)= 0, P(r=1, y=0, c=1)= 0,P(r=0, y=0, c=0)= 0, P(r=0, y=1, c=0)= 0, P(r=1, y=1, c=0)= 0.05,P(r=0, y=0, c=1)= 0.25, P(r=0, y=1, c=1)= 0, P(r=1, y=0, c=1)= 0.From the given table, the probability of the disk drive being in a normal state, C=0, is P(C=0)=P(r=0, y=0, c=0)+P(r=0, y=1, c=0)+P(r=1, y=0, c=0)=0.1+0.2+0.2=0.5Hence, the probability of the disk drive being in a failed state, C=1, is:P(C=1)=P(r=0, y=0, c=1)+P(r=0, y=1, c=1)+P(r=1, y=0, c=1)+P(r=1, y=1, c=0)=0.25+0+0+0.05=0.3Therefore, the probability of the disk drive being in a normal state is 0.5, and the probability of the disk drive being in a failed state is 0.3.
Learn more about Probability
brainly.com/question/11234923
#SPJ11
Suppose E and F are two events, with the following probability table F F’
E 0.1 0.3 E' 0.2 0.4 a) Compute P(EF). b) Are E and F independent? Explain. c) Are E and F mutually exclusive? Explain.
a) With the following probability table F F, Let’s apply the formula for the intersection of events to solve the first part of the problem.
P(EF) = P(E) x P(F|E).We know that P(E) = 0.1 and that P(F|E) = 0.3. Therefore,P(EF) = P(E) x P(F|E) = 0.1 x 0.3 = 0.03.b) Two events E and F are independent if and only if their intersection is equal to the product of their individual probabilities.
P(EF) = P(E) x P(F) if and only if E and F are independent. We know that P(E) = 0.1 and that P(F) = 0.1 + 0.3 = 0.4. Therefore, P(EF) = 0.03, which is different from 0.1 x 0.4 = 0.04.
Since P(EF) is different from P(E) x P(F), it means that E and F are not independent.c) Two events E and F are mutually exclusive if and only if their intersection is the null set.P(EF) = ∅ if and only if E and F are mutually exclusive. We know that P(EF) = 0.03, which is not equal to the null set. Therefore, E and F are not mutually exclusive.
Learn more about probablity:
https://brainly.com/question/24756209
#SPJ11
Remove brackets of 3(2a+5b)
Solve this math problem below
the only option that satisfies both conditions is option B:[tex]y = 12 \sqrt{(x)} - 1[/tex]. Its range is all real numbers and its graph is decreasing from left to right.
What is quadratic equation?
A quadratic equation is a type of polynomial equation of degree two, meaning it contains one or more terms that involve x raised to the power of two (i.e., x^2).
To determine which of these functions has a range of all real numbers and a graph that is decreasing from left to right, we can examine the behavior of the functions as x approaches positive or negative infinity.
For option A, we see that the term (x+7) inside the square root will approach infinity as x approaches infinity, and since the term is subtracted from 3 and multiplied by -6, the y-values will approach negative infinity.
For option B, as x approaches infinity, the square root term will also approach infinity, and since it is being multiplied by 12 and subtracted by 1, the y-values will approach positive infinity.
For option C, as x approaches negative infinity, the term (x+1) inside the cube root will approach negative infinity, and since it is being multiplied by 3 and subtracted by 4, the y-values will approach negative infinity.
For option D, as x approaches negative infinity, the cube root term will approach negative infinity, and since it is being multiplied by -5 and added to 15, the y-values will approach positive infinity.
Therefore, the only option that satisfies both conditions is option B: y = [tex]12 \sqrt{(x)} - 1.[/tex] Its range is all real numbers and its graph is decreasing from left to right.
For the first question, we know that the given square root function has an endpoint at (-4, 19). Let's substitute these values into the function to solve for the unknown parameter 'a':
[tex]y = a\sqrt{(x-h)}+k[/tex]
[tex]19 = a \sqrt{(-4-h)}+k[/tex]
We also know that the square root function has a domain of all values of 'x' such that the expression inside the square root is non-negative. Therefore:
(x-h) >= 0
x >= h
Combining the two equations, we get:
[tex]19 = a\sqrt{(-4-h)}+k[/tex]
h <= x
Since we have only one equation with two unknowns ('a' and 'k'), we cannot solve for the exact values of 'h' and 'a'. However, we can eliminate some of the answer choices based on the domain condition:
For the second question, we need to find a function that has a range of all real numbers and a graph that is decreasing from left to right. Let's analyze each option:
Option A: y=-6√x+7+3 has a maximum value of 3 and a decreasing graph from left to right, but its range is limited to y <= 3, so it does not satisfy the range condition.
Option B: y = 12-1 has a constant value of 11, so its range is limited to y = 11, which does not satisfy the range condition.
Option C: y=3x+1-4 has a graph that is increasing from left to right, so it does not satisfy the decreasing graph condition.
Option D: y=-5 +15 has a constant value of 10, so its range is all real numbers, and its graph is decreasing from left to right (a horizontal line).
Therefore, the answer is Option D: y=-5 +15.
To learn more about quadratic equations from the given link:
brainly.com/question/30098550
#SPJ1
