If the intensity of an electromagnetic wave is 80 MW/m2, what is the amplitude of the magnetic field of this wave

Answer:

Explanation:

Formula for calculating the relationship between  the electromotive force (emf), current and number of turns of a coil in a transformer is expressed as shown:

[tex]\dfrac{V_s}{V_p} = \dfrac{N_s}{N_p} = \dfrac{I_p}{I_s}[/tex]  where;

Vs and Vp are the emf in the secondary and primary coil respectively

Ns and Np are the number if turns in the secondary and primary coil respectively

Ip and Is are the currents in the secondary and primary coil respectively

Since the are all equal to each other, then we can equate any teo of the expression as shown;

[tex]\dfrac{N_s}{N_p} = \dfrac{I_p}{I_s}[/tex]

Given parameters

Np = 500-turns

Ns = 2000-turns

Is = 3.0Amp

Required

Current in the primary coil (Ip)

Using the relationship [tex]\dfrac{N_s}{N_p} = \dfrac{I_p}{I_s}[/tex]

[tex]I_p = \dfrac{N_sI_s}{N_p}[/tex]

[tex]I_p = \dfrac{2000*3}{500} \\\\I_p = \frac{6000}{500}\\ \\I_p = 12A\\[/tex]

Hence the current in the primary coil is 12Amp

Answer:

we see it is a linear relationship.

Explanation:

The magnetic flux is u solenoid is

      B = μ₀ N/L   I

where N is the number of loops, L the length and I the current

By applying this expression to our case we have that the current is the same in all cases and we can assume the constant length. Consequently we see that the magnitude of the magnetic field decreases with the number of loops

      B = (μ₀ I / L)  N

the amount between paracentesis constant, in the case of 4 loop the field is worth

      B = cte 4

N       B

4       4 cte

3       3 cte

2       2 cte

1        1 cte

as we see it is a linear relationship.

In addition, this effect for such a small number of turns the direction of the field that is parallel to the normal of the lines will oscillate,

Answer: 0.0617

Explanation:

Given: The probability of wet weather on any given day in a city of Punjab : p=15%=0.15

Let X be a binomial variable that represents the number of days having wet weather.

Binomial probability formula : [tex]P(X=x)=^nC_xp^x(1-p)^x[/tex], where n= total outcomes, p = probability of success in each outcomes.

Here, n= 7 ( 1 week = 7 days)

The probability that it will take a week for it three wet weather on 3 separate days:

[tex]P(X=3)^=\ ^7C_3(0.15)^3(1-0.15)^{7-3}\\\\=\dfrac{7!}{3!(7-3)!}(0.15)^3(0.85)^4\\\\=\dfrac{7\times6\times5}{3\times2}\times 0.003375\times0.52200625\approx0.0617[/tex]

Hence, the required probability =0.0617

Answer:

cost_cost = $ 96

Explanation:

In this exercise we have units in the groin system and the SI system, to avoid problems let's reduce everything to the SI system

         performance = 21 miles / gallon (1,609 km / 1 mile) (1 gallon / 3,785 l)

         perfomance= 8,927 km / l

now let's use a direct rule of proportions (rule of three). If a liter travels 8,927 km, how many liters are needed to travel the 2015 km

          #_gasoline = 2015 km (1l / 8.927 km) = 225.72 liters

Now let's find the total cost of fuel. Ns indicates that $ 0.11 = 1 peso and the liter of fuel costs 5.8 pesos

            cost_litre = 5.8 peso ($ 0.11 / 1 peso) = $ 0.638

             cost_gasoline = #_gasoline   cost_litro

             cost_gasoline = 225.72   0.638

             cost_gasoline = $ 144

This cost is for the one way trip, the total round trip cost is

             cost_total = 2 cost_gasoline

             cost_total = $ 288

Now let's look for the cost in the vehicle, you and two people will go, for which a total of 3 people will go, so the cost per person is

                cost_person = total_cost / #_people

                cost_person = 288/3

                cost_cost = $ 96

Answer:

2 m/s

Explanation:

The electromagnetic flow-metre work on the principle of electromagnetic induction. The induced voltage is given as

[tex]E = Blv[/tex]

where [tex]E[/tex] is the induced voltage = 2.88 mV = 2.88 x 10^-3 V

[tex]l[/tex] is the distance between the electrodes in this field which is equivalent to the diameter of the tube = 1.2 cm = 1.2 x 10^-2 m

[tex]v[/tex] is the velocity of the fluid through the field = ?

[tex]B[/tex] is the magnetic field = 0.120 T

substituting, we have

2.88 x 10^-3 = 0.120 x 1.2 x 10^-2 x [tex]v[/tex]

2.88 x 10^-3 = 1.44 x 10^-3 x [tex]v[/tex]

[tex]v[/tex] = 2.88/1.44 = 2 m/s

Answer:

Electric field is zero at point 4.73 m

Explanation:

Given:

Charge place = 50 cm  = 0.50 m

change q1 = 5 µC

change q2 = 4 µC

Computation:

electric field zero calculated by:

[tex]E1 =k\frac{q1}{r^2} \\\\E2 =k\frac{q2}{R^2} \\\\[/tex]

Where electric field is zero,

First distance = x

Second distance = (x-0.50)

So,

E1 = E2

[tex]k\frac{q1}{r^2}=k\frac{q2}{R^2} \\\\[/tex]

[tex]\frac{5}{x^2}=\frac{4}{(x-50)^2} \\\\[/tex]

x = 0.263 or x = 4.73

So,

Electric field is zero at point 4.73 m

Answer:

Number of turns of wire(N) = 3,036 turns (Approx)

Explanation:

Given:

Diameter = 13 Cm

emf = 5.6 v

Note:

The given question is incomplete, unknown information is as follow.

Magnetic field increases = 0.25 T in 1.8 (Second)

Find:

Number of turns of wire(N)

Computation:

radius (r) = 13 / 2 = 6.5 cm = 0.065 m

Area = πr²

Area = (22/7)(0.065)(0.065)

Area = 0.013278 m²

So,

emf = (N)(A)(dB / dt)

5.6 = (N)(0.013278)(0.25 / 1.8)

5.6 = (N)(0.013278)(0.1389)

N = 3,036.35899

Number of turns of wire(N) = 3,036 turns (Approx)

Answer:D

Explanation:I got it right

Answer:

They needed to be able to unite even though they spoke different languages.

Explanation:

Answer:

The time of short pulse of light beam is [tex]2.37\times10^{-9}\ sec[/tex]

Explanation:

Given that,

A beam of light from a laser illuminates a glass.

Suppose, the length of piece is [tex]L=25.21\times10^{-2}\ m[/tex]

Index of refraction is 2.83.

We need to calculate the speed of light pulse in glass

Using formula of speed

[tex]v=\dfrac{c}{\mu}[/tex]

Put the value into the formula

[tex]v=\dfrac{3\times10^{8}}{2.83}[/tex]

[tex]v=1.06\times10^{8}\ m/s[/tex]

We need to calculate the time of short pulse of light beam

Using formula of velocity

[tex]v=\dfrac{d}{t}[/tex]

[tex]t=\dfrac{d}{v}[/tex]

Put the value into the formula

[tex]t=\dfrac{25.21\times10^{-2}}{1.06\times10^{8}}[/tex]

[tex]t=2.37\times10^{-9}\ sec[/tex]

Hence, The time of short pulse of light beam is [tex]2.37\times10^{-9}\ sec[/tex]

Answer:

6.9kgm²

Explanation:

For an axis through the center of the rectangle, I = m[(w²+L²)/12

Using the parallel axis theorem, the added value of I = mR² = m[(w²/4 + L²/4]

Adding the 2 expressions,

I = (m/3)*(w²+L²)

I =6.95 kg∙m²

Answer:

a) m = 0.626 kg , b) T = 2.09 s , c)   a = 1.0544 m / s²

Explanation:

In a spring mass system the equation of motion is

        x = A cos (wt + Ф)

with      w = √(k / m)

a) velocity is defined by

        v = dx / dt

        v = - A w sin (wt + Ф)          (1)

give us that the speed is

        v = 26.1 m / s

for the point

        x = a / 2

the range of motion is a = 11.0 cm

       x = 11.0 / 2

       x = 5.5 cm

Let's find the time it takes to get to this distance

       wt + Ф = cos⁻¹ (x / A)

       wt + Ф = cos 0.5

        wt + Ф = 0.877

In the exercise they do not indicate that the body started its movement with any speed, therefore we assume that for the maximum elongation the body was released, therefore the phase is zero f

       Ф = 0

       wt = 0.877

       t = 0.877 / w

we substitute in equation 1

       26.1 = -11.0 w sin (w 0.877 / w)

        w = 26.1 / (11 sin 0.877))

        w = 3.096 rad / s

from the angular velocity equation

       w² = k / m

       m = k / w²

       m = 6 / 3,096²

       m = 0.626 kg

b) angular velocity and frequency are related

       w = 2π f

frequency and period are related

        f = 1 / T

we substitute

        w = 2π / T

        T = 2π / w

        T = 2π / 3,096

        T = 2.09 s

c) maximum acceleration

 the acceleration of defined by

        a = dv / dt

        a = - Aw² cos (wt)

the acceleration is maximum when the cosine is ±1

         a = A w²

          a = 11  3,096²

        a = 105.44 cm / s²

we reduce to m / s

        a = 1.0544 m / s²

Answer:

 v_{1fy} = - 0.4549 m / s

Explanation:

This is an exercise of conservation of the momentum, for this we must define a system formed by the two balls, so that the forces during the collision have internal and the momentum is conserved

initial. Before the crash

      p₀ = m v₁₀

final. After the crash

      [tex]p_{f}[/tex] = m [tex]v_{1f}[/tex] + m v_{2f}

Recall that velocities are a vector so it has x and y components

       p₀ = p_{f}

we write this equation for each axis

X axis

       m v₁₀ = m v_{1fx} + m v_{2fx}

Y Axis  

       0 = -m v_{1fy} + m v_{2fy}

the exercise tells us the initial velocity v₁₀ = 1.83 m / s, the final velocity v_{2f} = 1.15, let's use trigonometry to find its components

      sin 23.3 = v_{2fy} / v_{2f}

      cos 23.3 = v_{2fx} / v_{2f}

      v_{2fy} = v_{2f} sin 23.3

      v_{2fx} = v_{2f} cos 23.3

we substitute in the momentum conservation equation

       m v₁₀ = m v_{1f} cos θ + m v_{2f} cos 23.3

       0 = - m v_{1f} sin θ + m v_{2f} sin 23.3

      1.83 = v_{1f} cos θ + 1.15 cos 23.3

       0 = - v_{1f} sin θ + 1.15 sin 23.3

      1.83 = v_{1f} cos θ + 1.0562

        0 = - v_{1f} sin θ + 0.4549

     v_{1f} sin θ = 0.4549

     v_{1f}  cos θ = -0.7738

we divide these two equations

      tan θ = - 0.5878

      θ = tan-1 (-0.5878)

       θ = -30.45º

we substitute in one of the two and find the final velocity of the incident ball

        v_{1f} cos (-30.45) = - 0.7738

        v_{1f} = -0.7738 / cos 30.45

        v_{1f} = -0.8976 m / s

the component and this speed is

       v_{1fy} = v1f sin θ

       v_{1fy} = 0.8976 sin (30.45)

       v_{1fy} = - 0.4549 m / s

Answer:

0.273m/s

Explanation:

first find out the meaning of 0.90×10−4m3/s

literally, that is 0.9x6 = 5.4m3/s = 3•5.4m/s or 16.2 m/s

1.5 gal/min = 0.00009464 m³/s, perhaps that is what you mean?

cross-sectional area of pipe is πr² = 0.0105²π = 0.0003464 m²

so you have a a flow of 0.00009464 m³/s flowing through an area of 0.0003464 m²

they divide to 0.00009464 m³/s / 0.0003464 m² = 0.273 m/s

Answer:

10.8rev

Explanation:

Using

Wf²-wf = 2 alpha x theta

0²- 56.36x56.36/ 2(-20.13) x theta

Theta = 68.09 rad

But 68.09/2π

>= 10.8 revolutions

Explanation:

Answer:

At 3 meter distance, the per-second count is 222.22 and at a 10 meter distance, the per-second count is 20.

Explanation:

The number of particles (N)  counts are inversely proportional to the distance between the source and the detector.  

By using the below formula we can find the number of counts.

[tex]N2 = \frac{(D1)^2}{(D2)^2} \times N1 \\N1 = 2000 \\D 1 = 1 \ meter \\D2 = 3 \\[/tex]

The number of count per second, when the distance is 3 meters.

[tex]= \frac{1}{3^2} \times 2000 \\= 222.22[/tex]

Number of count per second when the distance is 10 meters.

[tex]= \frac{1}{10^2} \times 2000 \\= 20[/tex]

Answer:

The maximum force that can be lifted by this system is  51,478.4 kg

Explanation:

Given;

maximum gauge pressure of the hydraulic system, Hp = 15 atm = 1.52 x 10⁶ N/m²

diameter of the piston, d = 65 cm = 0.65 m

The maximum gauge pressure of the piston is given as;

[tex]Hp = \frac{F}{A}[/tex]

Where;

F is the maximum force of the piston

A is the area of the piston

[tex]A = \pi (\frac{0.65}{2} )^2\\\\A = 0.3319 \ m^2[/tex]

F = Hp x A

F = 1.52 x 10⁶N/m² x 0.3319m²

F = 504488 N

Force is given as;

F = mg

m = F/g

m = 504488/9.8

m = 51,478.4 kg

Therefore, the maximum force that can be lifted by this system is  51,478.4 kg

Answer:

K = 227.04 W/m.°C

Explanation:

First we need to find the heat required to melt the ice:

q = m H

where,

q = heat required = ?

m = mass of the ice = 8.5 g = 8.5 x 10⁻³ kg

H = Latent heat of fusion of ice = 3.34 x 10⁵ J/kg

Therefore,

q = (8.5 x 10⁻³ kg)(3.34 x 10⁵ J/kg)

q = 2839 J

Now, we find the heat transfer rate through rod:

Q = q/t

where,

t = time = (10 min)(60 s/1 min) = 600 s

Q = Heat Transfer Rate = ?

Therefore,

Q = 2839 J/600 s

Q = 4.73 W

From Fourier's Law of Heat Conduction:

Q = KA ΔT/L

where,

K = Thermal Conductivity = ?

A = cross sectional area = 1.25 cm² = 1.25 x 10⁻⁴ m²

L = Length of rod = 60 cm = 0.6 m

ΔT = Difference in temperature = 100°C - 0°C = 100°C

Therefore,

4.73 W = K(1.25 X 10⁻⁴ m²)(100°C)/0.6 m

K = (4.73 W)/(0.0208 m.°C)

K = 227.04 W/m.°C

Answer:

1) f = 214 Hz , 2)  answer is c , 3) f = 428 Hz , 4)   f₂ = 428 Hz ,   f₃ = 643Hz

Explanation:

1) A tube with both ends open, the standing wave has a maximum amplitude and a node in its center, therefore

                L = λ / 2

               λ  = 2L

               λ  = 2 0.8

               λ  = 1.6 m

wavelength and frequency are related to the speed of sound (v = 343 m / s)

                v =λ  f

                f = v / λ  

                f = 343 / 1.6

                f = 214 Hz

2) In this case the air comes out through the open hole, so we can assume that the length of the tube is reduced

           λ' = 2 L ’

          as L ’<L₀

          λ' <λ₀

          f = v / λ'

          f' > fo

the correct answer is c

3) in this case the length is L = 0.40 m

          λ = 2 0.4 = 0.8 m

          f = 343 / 0.8

          f = 428 Hz

4) the different harmonics are described by the expression

         λ = 2L / n           n = 1, 2, 3

         λ₂ = L

         f₂ = 343 / 0.8

         f₂ = 428 Hz

         λ₃ = 2 0.8 / 3

         λ₃ = 0.533 m

         f₃ = 343 / 0.533

         f₃ = 643 Hz

4,1) as we have two maximums at the ends, all integer multiples are present

       the answer is C

E) the length of an open pipe created that has a wavelength of lam = 1.6 m is requested

in this pipe there is a maximum in the open part and a node in the closed part, so the expression

        L = λ / 4

        L = 1.6 / 4

        L = 0.4 m

the answer is C

F) in this type of pipe the general expression is

           λ = 4L / n         n = 1, 3, 5 (2n + 1)

therefore only odd values ​​can produce standing waves

           λ₃ = 4L / 3

           λ₃ = 4 0.4 / 3

           λ₃ = 0.533

           f₃ = 343 / 0.533

           f₃ = 643 Hz

Answer:

30cm

Explanation:

assume that the eyes are substantially above the water so that sin(theta) is approximately theta.

( small angle approximation).

The point at which a ray leaving the fish hits the surface of the water is x to the side of the centreline and the depth of the water is d

x/d = sin( angle of incidence)

if the apparent depth of the water is h then

x/h = sin( angle of refraction)

and applying snells law

1 sin ( theta air) = 1.33 sin( theta water)

1 * x/h = 1.33 * x/d

d/h = 1.33

or h/d = 1/1.33

h/39 = 1.33

h = 39 /1.33 so that is the apparent depth of the stream assuming:-

1. Your eyes are almost directly overhead

and

2. your eyes are a significant distance above the surface of the water.

x/d = 1.33 x/h

h/d =39/1.3

= 30cm

Answer:

The projectile strikes the tower at a height of 354.824 meters.

Explanation:

The projectile experiments a parabolic motion, which consist of a horizontal motion at constant speed and a vertical uniformly accelerated motion due to gravity. The equations of motion are, respectively:

Horizontal motion

[tex]x = x_{o}+v_{o}\cdot t \cdot \cos \theta[/tex]

Vertical motion

[tex]y = y_{o} + v_{o}\cdot t \cdot \sin \theta +\frac{1}{2} \cdot g \cdot t^{2}[/tex]

Where:

[tex]x_{o}[/tex], [tex]x[/tex] - Initial and current horizontal position, measured in meters.

[tex]y_{o}[/tex], [tex]y[/tex] - Initial and current vertical position, measured in meters.

[tex]v_{o}[/tex] - Initial speed, measured in meters per second.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]t[/tex] - Time, measured in seconds.

The time spent for the projectile to strike the tower is obtained from first equation:

[tex]t = \frac{x-x_{o}}{v_{o}\cdot \cos \theta}[/tex]

If [tex]x = 600\,m[/tex], [tex]x_{o} = 0\,m[/tex], [tex]v_{o} = 120\,\frac{m}{s}[/tex] and [tex]\theta = \frac{\pi}{4}[/tex], then:

[tex]t = \frac{600\,m-0\,m}{\left(120\,\frac{m}{s} \right)\cdot \cos \frac{\pi}{4} }[/tex]

[tex]t \approx 7.071\,s[/tex]

Now, the height at which the projectile strikes the tower is: ([tex]y_{o} = 0\,m[/tex], [tex]t \approx 7.071\,s[/tex], [tex]v_{o} = 120\,\frac{m}{s}[/tex] and [tex]g = -9.807\,\frac{m}{s^{2}}[/tex])

[tex]y = 0\,m + \left(120\,\frac{m}{s} \right)\cdot (7.071\,s)\cdot \sin \frac{\pi}{4}+\frac{1}{2}\cdot \left(-9.807\,\frac{m}{s^{2}} \right) \cdot (7.071\,s)^{2}[/tex]

[tex]y \approx 354.824\,m[/tex]

The projectile strikes the tower at a height of 354.824 meters.

Answer:

The  angular acceleration is  [tex]\alpha = 3.235 \ rad/s ^2[/tex]

Explanation:

From the question we are told that

    The moment of inertia is  [tex]I = 0.034\ kg \cdot m^2[/tex]

     The  net torque is  [tex]\tau = 0.11\ N \cdot m[/tex]

Generally the net torque is mathematically represented as

           [tex]\tau = I * \alpha[/tex]

Where [tex]\alpha[/tex] is the angular acceleration so  

        [tex]\alpha = \frac{\tau }{I}[/tex]

substituting values

         [tex]\alpha = \frac{0.1 1}{ 0.034}[/tex]

        [tex]\alpha = 3.235 \ rad/s ^2[/tex]

Answer:

The electric field strength needed is 4 x 10⁵ N/C

Explanation:

Given;

magnitude of magnetic field, B = 0.1 T

velocity of the charge, v = 4 x 10⁶ m/s

The velocity of the charge when there is a balance in the magnetic and electric force is given by;

[tex]v = \frac{E}{B}[/tex]

where;

v is the velocity of the charge

E is the electric field strength

B is the magnetic field strength

The electric field strength needed is calculated as;

E = vB

E = 4 x 10⁶ x 0.1

E = 4 x 10⁵ N/C

Therefore, the electric field strength needed is 4 x 10⁵ N/C

Answer:

Explanation:

[tex]Power = IV[/tex]

From ohms law we know that

[tex]V= IR\\\\I= \frac{V}{R} \\\\Power= \frac{V}{R}*V\\\\Power= \frac{V^2}{R}[/tex]

Given data

P1 = 0.5 Watt

P2 = ?

V1= 3 Volts

V2= 1 Volt

Thus we can solve for the power dissipated as follows

[tex]P1= \frac{V1^2}{R1}\\\\P2= \frac{V2^2}{R2}[/tex]

[tex]\frac{P1}{P2} = \frac{V1^2}{V2^2}\\\\ P2=\frac{ V2^2}{ V1^2} *P1\\\\ P2=\frac{ 1^2}{ 3^2} *0.5= 0.055= 0.056 W[/tex]

The  resistor will dissipate 0.056 Watt

Answer:

R₁ = 14.7 10³ Ω , R₂ = 8.18 10³ Ω ,  R₃ = 1.72 10³ Ω ,  R₄ = 5.4 10³ Ω    1/8 W resistor

Explanation:

For this exercise we must use a series circuit since the sum of the voltage on each resin is equal to the source voltage (V = 30 V)

Therefore we build a circuit with 4 resistors in series, in such a way that

   V = i R

let the voltage

1st resistance

         V = i R

         R₁ = V / i

         R₁ = 14.7 / 1 10⁻³

         R₁ = 14.7 10³ Ω

power is

        P = V i

        P = 14.7 1 10⁻³

        P = 14.7 10⁻³ W = 0.0147 W

a resistance of ⅛ W is indicated

2nd resistance

          R₂ = 8.18 / 1 10⁻³

          R₂ = 8.18 10³ Ω

Power

          P = 8.18 1 10⁻³

          P = 0.00818W

a 1/8 W resistor

3rd resistance

this resistance is calculated in such a way that

          V₁ + V₂ + V₃ = 24.6

          V₃ = 24.6 - V₁ -V₂

          V₃ = 24.6 - 14.7 - 8.18

          V₃ = 1.72 V

          R₃ = 1.72 / 1 10⁻³

          R₃ = 1.72 10³ Ω

power

          P = Vi

          P = 1.72 10⁻³

          P = 0.00172 W

a resistance of ⅛ W

To obtain the voltage of 24.6 we use this three resistors together

4th resistance

The value of this resistance is calculated so that the sum of all the voltages reaches the source voltage

           30 = V₁ + V₂ + V₃ + V₄

           V₄ = 30 - V₁ -V₂ -V₃

           V₄ = 30 -14.7 - 8.18 - 1.72

           V₄ = 5.4 V

          R₄ = 5.4 / 1 10⁻³

          R₄ = 5.4 10³ Ω

Power

         P = V i

         P = 5.4 10⁻³

         P = 0.0054 W

⅛ W resistance

The values ​​of these resistance are commercially

Let's check the consumption of the circuit

  R_total = R₁ + R₂ + R₃ + R₄

  R_total = (14.7 + 8.18 + 1.72 + 5.4) 10³

   R_total = 30 10³

the current circulating in the circuit is

     i = V / R_total

     i = 30/30 10³

     i = 1 10⁻³ A

therefore it is within the order requirement.

for connections see attached diagram

Answer:

in an accident, when the body collides with the air bags, the collision time of impact between the two bodies will increase due to the presence of air bags in the car. Larger is the impact time smaller is the transformation of energy between the body and air bag. That is why air bags greatly reduce the chance of injury in a car accident.

Answer:

the large amplitude wave keeps moving to the right

the small amplitude wave continues to move to the left.

When checking the answers, the correct ones are 1, 2

Explanation:

The waves fulfill the principle of superposition, which states that the value of the function at a point is the algebraic sum of the waves at a given instant.

The two waves in this exercise travel in the opposite direction, so when they are close, the resulting wave is the sum of the two waves, having a complicated shape. But when the waves follow their movement, they give in the same way as the initial a,

the large amplitude wave keeps moving to the right

the small amplitude wave continues to move to the left.

When checking the answers, the correct ones are 1, 2

Answer:

The three factors that can contribute to creating a delay in advanced care for the passengers in the overturned bus include:

1. Lack of communication: Since the accident happened on the remote hillside, there is a possibility that, there would be no communication network which could have afforded them the opportunity to call medical or technical team.

2. Steep Nature of the Hill: This is another factor which will affect the care which they could have received. Steeply area tends to be difficult for climbing in or out from.

3. Thunderstorm: This factor is another reason which could contribute to delay in receiving advance care. Thunderstorm create barriers for location f the area where the bus overturned or in other situation complicate the rescue efforts of the team sent out to rescue.

Explanation:

Answer:

(a) 0.613 m

(b) 0.385 m

(c) vₓ = 1.10 m/s, vᵧ = 3.50 m/s

v = 3.68 m/s², θ = 72.6° below the horizontal

Explanation:

(a)  Take down to be positive.

Given in the y direction:

v₀ = 0 m/s

a = 10 m/s²

t = 0.350 s

Find: Δy

Δy = v₀ t + ½ at²

Δy = (0 m/s) (0.350 s) + ½ (10 m/s²) (0.350 s)²

Δy = 0.613 m

(b) Given in the x direction:

v₀ = 1.10 m/s

a = 0 m/s²

t = 0.350 s

Find: Δx

Δx = v₀ t + ½ at²

Δx = (1.10 m/s) (0.350 s) + ½ (0 m/s²) (0.350 s)²

Δx = 0.385 m

(c) Find: vₓ and vᵧ

vₓ = aₓt + v₀ₓ

vₓ = (0 m/s²) (0.350 s) + 1.10 m/s

vₓ = 1.10 m/s

vᵧ = aᵧt + v₀ᵧ

vᵧ = (10 m/s²) (0.350 s) + 0 m/s

vᵧ = 3.50 m/s

The magnitude is:

v² = vₓ² + vᵧ²

v = 3.68 m/s²

The direction is:

θ = atan(vᵧ / vₓ)

θ = 72.6° below the horizontal

Answer:

1,860 g

Explanation:

In a system, the coefficient of static friction is usually higher than the coefficient of kinetic friction. This means that the kinetic friction is usually less than the static friction. From the question, since the book is already sliding, it means that kinetic friction is the friction in play. This means that before the reading on the scale that could have been possible at the moment the student overcame the static friction must be greater than the reading on the scale during sliding. The only option above 1580 g is 1860 g

Answer:

8 seconds

160 meters

Explanation:

Given in the y direction:

Δy = 0 m

v₀ = 40 m/s

a = -10 m/s²

Find: t

Δy = v₀ t + ½ at²

0 m = (40 m/s) t + ½ (-10 m/s²) t²

0 = 40t − 5t²

0 = 5t (8 − t)

t = 0 or 8

Given in the x direction:

v₀ = 20 m/s

a = 0 m/s²

t = 8 s

Find: Δx

Δx = v₀ t + ½ at²

Δx = (20 m/s) (8 s) + ½ (0 m/s²) (8 s)²

Δx = 160 m