Helppp how a deer gets it’s energy

Answer:

Tx not but mybe

Explanation:

for that reason its just trying to help

Answer:

the correct statement is 2. The solid plate will have the greater angular acceleration.

the correct phrase is 4. The plate with the hole has its mass distributed further out from the axis of rotation, which will increase its moment of inertia.

Explanation:

Newton's second law expression for rotational motion is

         τ = I α         (1)

where the torque is

         τ = F r

in this case, as the discs have the same radius and the applied force is the same, the torque is the same on the two discs.

The moment of inertia is given by the expression

        I =∫ r² dm

for bodies with high symmetry are tabulated

the moment of inertia for in disk solid is     I₁ = ½ m R₂²

the moment for a disk with a hole               I₂ = ½ m (R₁² + R₂²)

We can see that the moment of inertia of the disk with the hole is greater than the moment of inertia of the solid disk.

Let's use equation 1

          α = τ/I

therefore the angular acceleration is lower for the body with the higher moment of inertia, consequently the solid disk has higher angular acceleration

the correct statement is 2

The reason is because the moment of inertia is higher for the hollow disk.

the correct phrase is 4

According to the Newton's second law :- The acceleration of an object is directly related to the net force and inversely related to its mass. Acceleration of an object depends on two things, force and mass.

Answer:

Explanation:

Reverse the second equation, and change the sign of the enthalpy

Answer:

[tex]T=22.5sec[/tex]

Explanation:

From the question we are told that:

Mass of astronaut [tex]m_a=105kg[/tex]

Mass of tool [tex]m_t=16kg[/tex]

Distance [tex]d=18m[/tex]

Velocity of separation [tex]v_s= 0.1m/s[/tex]

Velocity of tool bag [tex]v_t=4.5m/s[/tex]

Generally the equation for momentum is mathematically given by

 [tex]P=mv[/tex]

Therefore

Initial Momentum before drop

 [tex]P_1=0.1(105+16)[/tex]

 [tex]P_1=12.1[/tex]

Initial Momentum after drop

 [tex]P_2=-16(4.5)+105V[/tex]

Therefore

Since [tex]P_1=P_2[/tex]

 [tex]-72+105V=12.1[/tex]

 [tex]V=0.8m/s[/tex]

Generally the equation for Time T is mathematically given by

 [tex]T=\frac{d}{V}[/tex]

 [tex]T=\frac{18}{0.8}[/tex]

 [tex]T=22.5sec[/tex]

Answer:

The cup is acted upon by an unbalanced force which is the acceleration of the car, but before it was an object at rest that stayed at rest.

Explanation:

Newton's first law of motion states, "if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force."

Since the cup is at rest while sitting on top of the car, it stays at rest as the car begins to move. Since the car is accelerating and the cup is not, the cup falls off of the car.

Answer:

[tex]a=0.2*10^{-5}g[/tex]

Explanation:

From the question we are told that:

Mass [tex]M=180=>0.18kg[/tex]

Charge [tex]Q=18mC=18*10^-^3C[/tex]

Velocity [tex]v=2.2m/s[/tex]

Length of Wire [tex]L=8.6cm=>0.086[/tex]

Current [tex]I=30A[/tex]

Generally the equation for Magnetic Field of Wire B is mathematically given by

 [tex]B=\frac{\mu_0*I}{2\pi*l}[/tex]

 [tex]B=\frac{4*3.14*10^-^7*I}{2*3.14*8.6}[/tex]

 [tex]B=6.978*10^{-5}T[/tex]

Generally the equation for Force on the plane F is mathematically given by

 [tex]F=qvB[/tex]

Therefore

 [tex]ma=qvB[/tex]

 [tex]a=\frac{qvB}{m}[/tex]

 [tex]a=\frac{18*10^{-5}83.4*6.978*10^{-5}}{0.18kg}[/tex]

 [tex]a=2.37*10^{-5}[/tex]

Therefore in Terms of g's

 [tex]a=\frac{2.37*10^{-5}}{9.8}[/tex]

 [tex]a=0.2*10^{-5}g[/tex]

Answer:

inertia

Explanation:

Answer:

0.94 m³/s

Explanation:

From the question given above, the following data were obtained:

Air flow (in ft³/min) = 2×10³ ft³/min

Air flow (in m³/s) =.?

Next, we shall convert 2×10³ ft³/min to m³/min. This can be obtained as follow:

35.315 ft³/min = 1 m³/min

Therefore,

2×10³ ft³/min = 2×10³ ft³/min × 1 m³/min / 35.315 ft³/min

2×10³ ft³/min = 56.63 m³/min

Finally, we shall convert 56.63 m³/min to m³/s. This can be obtained as follow:

1 m³/min = 1/60 m³/s

Therefore,

56.63 m³/min = 56.63 m³/min × 1/60 m³/s ÷ 1 m³/min

56.63 m³/min = 0.94 m³/s

Thus, 2×10³ ft³/minis equivalent to 0.94 m³/s.

Answer:

the period of oscillation of the given object is 0.14 s

Explanation:

Given;

mass of the object, m = 3 kg

extension of the spring, x = 0.085 m

The spring constant is calculated as follows;

[tex]F = mg = \frac{1}{2} ke^2\\\\2mg = ke^2\\\\k = \frac{2mg}{e^2} \\\\k = \frac{2\times 3 \times 9.8}{(0.085)^2} \\\\k = 8,138.41 \ N/m[/tex]

The angular speed of a 4 kg object is calculated as follows;

[tex]\omega = \sqrt{\frac{k}{m} } \\\\\frac{2\pi }{T} = \sqrt{\frac{k}{m} } \\\\T= 2\pi \sqrt{\frac{m}{k} } \\\\T = 2\pi \sqrt{\frac{4}{8138.41} }\\\\T = 0.14 \ s[/tex]

Therefore, the period of oscillation of the given object is 0.14 s

Answer:

a.  F = 14,733.33 N

b. F = 221,000 N

Explanation:

Given;

mass of the cars, m = 1300 kg

velocity of the cars, v = 17 m/s

time taken for the first car to stop after hitting a barrier, t = 1.5 s

time taken for the second car to stop after hitting a barrier, t = 0.1 s

The average forces exerted on each car is calculated as follows;

a. the car that hits a line of water barrels and takes 1.5 s to stop

[tex]F = ma = m\times \frac{v}{t} = 1300 \times \frac{17}{1.5} = 14,733.33 \ N\\\\F = 14,733.33 \ N[/tex]

b. the car that hits a concrete barrier and takes 0.10 s to stop

[tex]F = ma = m\times \frac{v}{t}= 1300 \times \frac{17}{0.1} = 221,000 \ N\\\\F = 221,000 \ N[/tex]

Answer:Alternativa A.   Damos o nome de interferência a superposição de efeitos que ocorre ao ser produzido dois pulsos de onda, que serão propagados e acabarão inevitavelmente por se encontrar. No instante em que os pulsos se cruzarem, há então, uma superposição de efeitos individuais de cada um deles. Se durante o cruzamento, houver um reforço das ondas, estará ocorrendo a este fenômeno.

Answer :

Considering initial velocity is 0,

It takes about 0.4 seconds.

Use the equation v-u =at

4-0 = 9.8×t

t = 4/9.8 = 0.4 seconds approximately.

Answer:

Explanation:

An atom emits a photon (particle of light) when transitioning from a ground state to its excited state. To obey conservation of energy, the energy gained by the atom when an electron moves to a lower energy level is equal to the energy it loses in emitting the photon. (The energy of a photon is E = hf, where E is the energy, h is Planck's constant, and f is the frequency of the photon.) Conversely, when an atom absorbs a photon (as is the case in absorption spectra), the electron absorbing the photon moves to a higher energy level.

Answer:

The correct option is D.

Explanation:

The wavelength of the photon can be calculated with the following equation:

[tex] E = h\frac{c}{\lambda} [/tex]

Where:

E: is the energy of the photon = 2.90 eV

h: is the Planck's constant = 6.62x10⁻³⁴ J.s

c: is the speed of light = 3x10⁸ m/s

λ: is the wavelength

Hence, the photon's wavelength is:

[tex] \lambda = \frac{hc}{E} = \frac{6.62 \cdot 10^{-34} J*s*3.0 \cdot 10^{8} m/s}{2. 90 eV*\frac{1.6 \cdot 10^{-19} J}{1 eV}} = 428 nm [/tex]

Therefore, the correct option is D.

I hope it helps you!

Answer:

i) the minimum acceleration to take off is 22500 km/h²

ii) the required time needed by the plane from starting to takeoff is 0.0133 hrs

iii) required force that the engine must exert to attain acceleration is 625 kN

Explanation:

Given the data in the question;

mass of plane m = 360,000 kg

take of speed v = 300 km/hr = 83.33 m/s

i)

What should be the minimum acceleration to take off if the length of the runway is 2.00 km

from Newton's equation of motion;

v² = u² + 2as

we know that a plane starts from rest, so; u = 0

given that distance S = 2 km

we substitute

(300)² = 0² + ( 2 × a × 2 )

90000 = 4 × a

a = 90000 / 4

a = 22500 km/h²

Therefore,  the minimum acceleration to take off is 22500 km/h²

ii) At this acceleration, how much time would the plane need from starting to takeoff.

from Newton's equation of motion;

v = u + at

we substitute

300 = 0 + 22500 × t

t = 300 / 22500

t = 0.0133 hrs

Therefore, the required time needed by the plane from starting to takeoff is 0.0133 hrs

iii) What force must the engines exert to attain this acceleration

we know that;

F = ma

acceleration a = 22500 km/hr² = 1.736 m/s²

so we substitute

F = 360,000 kg × 1.736 m/s²

F =  624960 N

F = 625 kN

Therefore, required force that the engine must exert to attain acceleration is 625 kN

Answer:

[tex]\phi=4344.72Nm^2/c[/tex]

Explanation:

From the question we are told that:

Dimension of Wall:

 [tex](L*B)=(8.7 m * 3.2 m)[/tex]

Electric field [tex]B=210 N/C[/tex]

Angle [tex]\theta =42 \textdegree North[/tex]

Generally the equation for electric Flux is mathematically given by

 [tex]\phi=EAcos\theta[/tex]

 [tex]\phi=210*(8.7*3.2)*cos 42[/tex]

 [tex]\phi=4344.72Nm^2/c[/tex]

Answer:

Moving electrons always create a magnetic field. Electrons moving along a wire make a magnetic field that goes in circles around the wire. When you bend the wire into a coil, the magnetic fields around each loop of the coil add up to make a long , thin magnet with north at one end and south at the other.

Explanation:

Answer:

According to " The second law of thermodynamics", the randomness of the universe is constantly increasing?

Explanation:

So answer option C. Have a great summer.

Answer:

Explanation:

From the given information:

The torque produced due to the force can be expressed as:

[tex]\tau = F \times r[/tex]

where;

[tex]\tau[/tex] = torque

F = force exerted

r = lever's arm radius

[tex]\tau[/tex] = [tex]2.00 \times 10^3 \times 0.03 m[/tex]

[tex]\tau[/tex] = 60 N.m

However, equating the torque with the moment of inertia & angular acceleration, we use the equation:

[tex]\tau[/tex] = I∝

60 Nm = I × 120 rad/s²

I = 60 Nm/120 rad/s²

I = 0.5 kg.m²

Answer:

[tex]\boxed {\boxed {\sf 29,400 \ Joules}}[/tex]

Explanation:

Gravitational potential energy is the energy an object possesses due to its position. It is the product of mass, height, and acceleration due to gravity.

[tex]E_P= m \times g \times h[/tex]

The object has a mass of 150 kilograms and is raised to a height of 20 meters. Since this is on Earth, the acceleration due to gravity is 9.8 meters per square second.

Substitute the values into the formula.

[tex]E_p= 150 \ kg \times 9.8 \ m/s^2 \times 20 \ m[/tex]

Multiply the three numbers and their units together.

[tex]E_p=1470 \ kg*m/s^2 \times 20 m[/tex]

[tex]E_p=29400 \ kg*m^2/s^2[/tex]

Convert the units.

1 kilogram meter square per second squared (1 kg *m²/s²) is equal to 1 Joule (J). Our answer of 29,400 kg*m²/s² is equal to 29,400 Joules.

[tex]E_p= 29,400 \ J[/tex]

The crate has 29,400 Joules of potential energy.

Answer:

29,400 J

Explanation:

did the quiz <3

Answer:

The distance travelled does not depend on the mass of the vehicle. Therefore, [tex]s = d[/tex]

Explanation:

This deceleration situation can be analyzed by means of Work-Energy Theorem, where change in translational kinetic energy is equal to the work done by friction:

[tex]\frac{1}{2}\cdot m\cdot v^{2}-\mu\cdot m\cdot g \cdot s = 0[/tex] (1)

Where:

[tex]m[/tex] - Mass of the car, in kilogram.

[tex]v[/tex] - Initial velocity, in meters per second.

[tex]\mu[/tex] - Coefficient of friction, no unit.

[tex]s[/tex] - Travelled distance, in meters.

Then we derive an expression for the distance travelled by the vehicle:

[tex]\frac{1}{2}\cdot v^{2} = \mu \cdot g \cdot s[/tex]

[tex]s = \frac{v^{2}}{\mu\cdot g}[/tex]

As we notice, the distance travelled does not depend on the mass of the vehicle. Therefore, [tex]s = d[/tex]

Answer:

[tex]\lambda=5.46\times 10^{-8}\ m[/tex]

Explanation:

The hottest ordinary star in our galaxy has a surface temperature of 53,000 K.

We need to find the peak wavelength of its thermal radiation.

Using Wein's law,

[tex]\lambda T=2.898\times 10^{-3}\\\\\lambda=\dfrac{2.898\times 10^{-3}}{53000}\\\\=5.46\times 10^{-8}\ m[/tex]

So, the peak wavelength of its thermal radiation is equal to [tex]5.46\times 10^{-8}\ m[/tex].

it's a form of government where people elect their representatives

Answer:

The word democracy itself means rule by the people.

Answer:

the rms value of the electric field component transmitted is 3.295 V/m

Explanation:

Given;

intensity of the unpolarized light, I = 0.0288 W/m²

For unpolarized light, the relationship between the amplitude electric field and intensity is given as;

[tex]E_{max} = \sqrt{2\mu_0cI} \\\\E_{max} = \sqrt{2(4\pi \times 10^{-7})(3\times 10^8)(0.0288)} \\\\E_{max} = 4.66 \ V/m[/tex]

The relationship between the rms value of the electric field and the amplitude electric field is given as;

[tex]E_{rms} = \frac{E_0}{\sqrt{2} } =\frac{E_{max}}{\sqrt{2} } \\\\E_{rms} = \frac{4.66}{\sqrt{2} }\\\\E_{rms} = 3.295 \ V/m[/tex]

Therefore, the rms value of the electric field component transmitted is 3.295 V/m

d. An object did work on the environment.

Work is defined in many contexts. Some of these are;

i. Work is the product of force and displacement. In this case, work done is positive if the force applied on an object or body and the displacement caused by the force are in the same direction. If instead the force and displacement are in opposite direction, then the work done will be negative. If it is the case the force and the displacement are perpendicular to each other, the work done is zero.

ii. In the first law of thermodynamics, the internal energy of a system is the sum of the work done and the heat exchanged between the system and the environment. Therefore, work done is the difference between the internal energy of a system and the heat exchanged between the system and the environment.

In this case, work is said to be positive if work is done by the system (object) on the environment. It is negative if work is done by the environment on the system (object).

Answer:

its c

Explanation: