hello, please help!! asap!

Answer:

Organic Compounds CAN BE synthesized

Organic Compounds contain Carbon

Answer:

As water on the surface of lakes, oceans, and rivers warms up, it travels into the sky as very tiny droplets, or vapor. When the water vapor gets colder, it turns back to liquid to help form clouds.

When the liquid gets so heavy it can’t stay in the atmosphere anymore, it falls, or “precipitates,” as rain, snow, sleet, hail, or, my favorite, graupel. Once the precipitation reaches the ground or lands in lakes, oceans, and rivers, the cycle continues.

Explanation:

A scientist claims that the water molecules that you drink today could be millions of years old in the water cycle the new clouds athat re made cannot rain but the clouds which are old do rain.

The water cycle or cycle of water is the journey of each and every water molecule by which it is made up of as the clouds in the environment are made up of the evaporation process in the environment.

The vapors of evaporation condense in the environment to form the clouds and these clouds are only responsible for the rain but the old and heavy clouds can only do it.

Therefore, in the water cycle, the new clouds are made cannot rain but the clouds which are old do rain scientist claim that the water molecules that you drink today could be millions of years old.

Learn more about the water cycle, here;

https://brainly.com/question/1151425

#SPJ2

Answer:

Answer:

Explanation:

Potassium (K) atom has 19 electrons. The full electron configuration of Potassium (K) is 1s22s22p63s23p64s1

Principal energy level

Quantum number: n

1

2

3

4

5

6

Sublevels

availableQuantum number: l

1s

2s 2p

3s 3p 3d

4s 4p 4d 4f

5s 5p 5d 5f 5g

6s 6p 6d 6f 6g 6h

Answer:

1.26 g

Explanation:

Number of moles of ascorbic acid = concentration × volume

Concentration = 0.447 M

Volume = 16.00 mL

Number of moles = 0.447 × 16/1000

Number of moles = 7.152 × 10^-3 moles

Number of moles= mass/molar mass

Molar mass of ascorbic acid = 176.1 g/mol

Mass = 7.152 × 10^-3 moles × 176.1 g/mol

Mass = 1.26 g

Answer:

Explanation:

Lithium Sulphate

Answer:

Lithium sulfate is a white inorganic salt with the formula Li2SO4. It is the lithium salt of sulfuric acid.

Answer:

Be,Mg,Ra etc

Explanation:

It should be palced in group 2A because as it reacts with chlorine in ratio of 1:2 . It's valancy is 2 and is metal as it react with non metal donating two electrons .

one more thing it fits there orderly

Answer:

e.

6.7

hope it help

.

.

.

.

.

.

In this problem, we need to find the pH of a buffer (pH = 4.45) that is produced by the reaction of strong acids as HBr that reacts with weak bases as NaC₇H₅O₂ producing its weak acid and a salt, as follows:

HBr + NaC₇H₅O₂ → HC₇H₅O₂ + NaBr

If in the reaction, the limiting reactant is the strong acid, we will produce a buffer (The aqueous mixture of a weak acid and its strong base).

Using Henderson-Hasselbalch equation, we can find the pH of this buffer:

[tex]pH = pKa + log \frac{[NaC_7H_5O_2]}{[HC_7H_5O_2]}[/tex]

Where:

pKa is -log Ka = 4.20

[] could be taken as the moles of each species

After the reaction, the moles of HBr = Moles of HC₇H₅O₂ and the remaining moles of NaC₇H₅O₂ = Initial moles of NaC₇H₅O₂ - Moles of HBr.

Moles HBr:

22.5mL = 0.0225L * (0.200mol/L) = 4.5x10⁻³ moles HBr

Moles NaC₇H₅O₂:

50.0mL = 0.0500L * (0.250mol/L) = 0.0125 moles NaC₇H₅O₂

That means the moles after the reaction of the species of the buffer are:

Moles HC₇H₅O₂ = Moles HBr = 4.5x10⁻³ moles

Moles NaC₇H₅O₂ = 0.0125 moles - 4.5x10⁻³ moles = 8.0x10⁻³ moles

Replacing in H-H equation:

[tex]pH = 4.20+ log \frac{[8.0x10^{-3}]}{[4.5x10^{-3}]}[/tex]

pH = 4.45

Learn more about Henderson-Hasselbalch equation in:

https://brainly.com/question/13423434

Answer:

Explanation:

25 yard [3 feet / 1 yard] [12 inches / 1 foot] = 25 * 3 * 12 = 900 inches in 25 yards.

Always put the unit you are going to on top and the unit you are coming from on the bottom.

So in this example, you want to going to feet to start with. That's on top. Yards are on the bottom of the first bracket.  In second bracket feet are on the bottom, inches are what you are going to on the top.

Explanation:

Desposition of solid matter in a solution

when ph decrease that means acidity increase

when ph increase that means basicity increase

Answer:

chemical reaction between those a b c it's a reaction which occurs when heating

Answer:

yes they were made to carry thousands of lb high up

Explanation:

For example, elephants form groups with only females and their offspring. Once the male offspring reach a certain age, they leave the group and become solitary. Which is a benefit of this type of social group structure? A:Females do not have to compete for a mate.

Answer:

Isotopes

Explanation:

An isotope are the atoms of an element with similar chemical identity and number of protons but different atomic masses. This means that isotopes of an element differ from one another by their number of NEUTRONS.

For example, the uranium element possesses isotopes as follows: Uranium-235 and uranium-238. This two isotopes have the same chemical identity and number of protons/atomic no., which is 92. However, the atomic masses (235 and 238) are different.

Answer:

Isotopes

Explanation:

Answer:

H2O + SO2 → H2SO3

Explanation:

H2O + SO2 → H2SO3

Answer:

l think this is the answer .

Answer:

When we shake the branch of a tree the tree possesses a state of motion whereas the fruits and leaves tend to remain in state of rest. Due to this inertia of rest the fruits and leaves get detached from the branch and because of gravity it falls down.

Explanation:

so it's because of the gravity .

1st part is ure answer --> 2M

Given mass -> 58 grams

mass of NaCl -> 58.44 approx -> 58 any

moles given-> 1 moles

[tex]Molarity = \frac{moles}{vol \: in \: lts} [/tex]

[tex]Molarity = \frac{1}{0.5} = \frac{10}{5} \\Molarity = 2M[/tex]

Answer:

The equilibrium shifts right to produce more SO3 molecules.

Explanation:

The equilibrium law states that when a system encounters a disturbance like a temperature, concentration, or pressure modifications, it will react to restore a new state of equilibrium.  

Adding a reactant such as oxygen (O2) will shift the reaction in the direction of the product, on the basis of the equilibrium law. Therefore, the equilibrium will move toward the product side.

Answer:

by the expirement:

In which mix salt with water

Answer:

3

Explanation:

sky is high and I am good.

Answer:

C.

Explanation:

Answer A is incorrect because a compound doesn't have to be made with only metals.

Answer B is incorrect because that is actually the definition of a pure element.

Answer C is correct because to make a compound, there has to be a chemical reaction where bonds are formed and an entirely new substance is created.

Answer D is incorrect because compounds cannot be separated by physical means.

Hope this helps :D

Answer:

Opposite.

Water exhibits negative charge near hydrogen, positive near oxygen.

This is why it is OPPOSITE.

Let me know if this helps!

Water is a polar compound because it exhibits opposite charges. Therefore, option C is correct.

The term polar compound is defined as the compound with distinct regions of positive and negative charge, as a result of bonding with atoms such as nitrogen, oxygen, or sulfur.

Water is a polar compound because the covalent bonds between hydrogen and oxygen in the water molecule are polar in nature. Any molecule with lone pairs of electrons around the central atom is polar compound.

In water there are two atoms are present that are oxygen and hydrogen. Hydrogen has positive charge while oxygen has negative charge,

Thus, Water is a polar compound because it exhibits opposite charges, option C is correct.

To learn more about the polar compound, follow the link;

https://brainly.com/question/14752836

#SPJ2

Answer:

1)Or

d.Sublimation

2)

b.iodine is the solute and alcohol is solvent

3)

a.compostion of solute

Answer:

1) a) centrifugation

OR

b) sublimation

2) a) iodine is the solute and alcohol is solvent

3) a) concentration of soLute

Answer:

Pour the sugar/diamond mixture into a container of water and stir until the sugar is dissolved completely. Then strain the mixture and wash the diamonds with water.

Answer:

Stir with a large enough volume of cold water to dissolve all the sugar. Filter to leave the diamonds on the filter paper. Wash on the filter paper with more water to remove any last traces of sugar solution. Allow to dry.

Answer:

- 10.6° C

Explanation:

Given that,

In the aqueous sucrose solution,

Molality of the solution (m) = 5.7

Freezing point constant (K) = 1.86

To find,

The freezing point of the solution = ?

Method:

To find its freezing point, we will first find out if the solute demonstrates an electrolyte or not.

In case it is not, the van't Hoff factor i.e. ration of particles' concentration denoted by (i) would be taken as 1. So,

ΔT(change in temperature) = i * m * K              (putting the given values)

= 1 * 5.7 * 1.86

= 10.6° C

Thus, the freezing point equals to 0 - 10.6° C = -10.6° C.

hiiiiiiiii

hiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii