Answer:
Harvey's Hardware
Marginal cost of producing the third lawnmowers:
d. $100
Explanation:
Harvey's marginal cost for producing the third unit of lawnmowers is the additional cost that resulted when the total cost increased from $200 to $300. However, it can be deciphered from the case that the marginal cost for Harvey, which it is supposed to be a variable cost, is traceable to the direct labor costs. This implies that the fixed cost element for Harvey in the production of the lawnmowers has been relatively fixed at $100. It does not vary with the volume of production, while the direct labor costs vary with the volume of lawnmowers produced by Harvey.
A pension fund manager is considering three mutual funds. The first is a stock fund, the second is a long-term government and corporate bond fund, and the third is a T-bill money market fund that yields a sure rate of 5.5%. The probability distributions of the risky funds are: Expected Return Standard Deviation Stock fund (S) 15 % 32 % Bond fund (B) 9 % 23 % The correlation between the fund returns is 0.15. What is the Sharpe ratio of the best feasible CAL?
Answer:
0.296875
Explanation:
Given the following :
Probability distribution of risky funds :
- - - - - - - - - - - - - - stock fund(S) - - bond fund(B)
Expected return - - - 15% - - - - - - - - - - 9%
Std - - - - - - - - - - - - - 32% - - - - - - - - - - 23%
Correlation between funds return = 0.15
Sure rate = 5.5%
To calculate the Sharpe ratio we use the formula :
Sharpe Ratio = (Expected Return of Investment - Risk Free Rate) / Standard Deviation of excess return of investment
For the stock fund :
Expected return = 15%
Risk free rate = market sure rate = 5.5%
Standard deviation = 32%
Sharpe ratio of stock fund :
(15% - 5.5%) / 32%
= 9.5% / 32%
= 0.296875
For Bond fund :
Expected return = 9%
Risk free rate = market sure rate = 5.5%
Standard deviation = 23%
Sharpe ratio of bond fund :
(9% - 5.5%) / 23%
= 3.5% / 23%
= 0.1521739
Therefore the Sharpe ratio of the best feasible CAL is the higher of the two ratios which is 0.296875
The following information describes the production activities of Mercer Manufacturing for the year.
Actual direct materials used 28,000 lbs. at $4.90 per lb.
Actual direct labor used 8,650 hours for a total of $174,730
Actual units produced 51,600
The budgeted standards for each unit produced are 0.50 pounds of direct material at $6.85 per pound and 10 minutes of direct labor at $21.20 per hour.
1. Compute the direct materials price and quantity variances. Do not round intermediate calculations.
2. Compute the direct labor rate and efficiency variances. Indicate whether each variance is favorable or unfavorable. Do not round intermediate calculations.
Answer:
Actual Quantity = 28,000
Actual Price = 4.90
Standard Quantity = 25,800
Standard Price = 4.85
1)a. Direct Material Price variance = (Standard price – Actual Price)*Actual Quantity
= (4.85 - 4.90) * 28,000
= $1,400 U
b. Direct Material Quantity variance = (Standard Quantity – Actual Quantity)*Standard price
= (51,600*0.5 - 28,000)*4.85
= $10,670 U
2) a. Direct Labor Rate Variance = (Standard Rate – Actual Rate)*Actual Hours
= (21.20 - 20.2) * 8,650
= $8,650 F
b. Direct Labor Efficiency variance = (Standard Hours – Actual Hours)*Standard rate
= (51,600*1/6 - 8,650) * 21.20
= $1,060 U
whatis the general termfor resources used by a business to produce good or services referred to as
Answer:
Factors of Production
Marston Manufacturing Company has two divisions, L and H. Division L is the company’s low-risk division and would have a weighted average cost of capital of 8% if it was operated as an independent company. Division H is the company’s high-risk division and would have a weighted average cost of capital of 14% if it was operated as an independent company. Because the two divisions are the same size, the company has a composite weighted average cost of capital of 11%. Division H is considering a project with an expected return of 12%. Should Marston Manufacturing Company accept or reject the project? Reject the project Accept the project On what grounds do you base your accept–reject decision? Division H’s project should be accepted, as its return is greater than the risk-based cost of capital for the division. Division H’s project should be rejected since its return is less than the risk-based cost of capital for the division.
Answer:
Should Marston Manufacturing Company accept or reject the project?
Marston C Company should reject the project because its expected return is lower than Division H's cost of capital.
Since the divisions' risk is so different, and probably their projects are also very different, the company should use different costs of capital to accept of reject the projects based on each division's cost of capital.
Imagine another situation where Division L is evaluating a project that yields 10%. If they used the company's WACC, then they should reject the project, but if they used the division's cost of capital, then they should accept the project (in this case I would recommend accepting it).
Explanation:
Division H's risk = 14%
Division L's risk = 8%
WACC = 11%
Who is responsible for responding to workflow(s) for equipment dispatch requests through the business workplace require An approving authority must approve
Answer:
Commander
Explanation:
GCSS-Army is short for Global Combat Support System-Army. The GCSS is a section of the United States Army that is fielded under the 11th Armored Cavalry Regiment. There are the GCSS Wave 1 and GCSS Wave 2. These two groups have different roles.
The role of the Commander falls under the Wave 2 functions where he is required to perform the roles of maintenance, dispatch, unit supply, and property book functions. The Wave 1 function is mostly about allowing access to support supply activity functions. The commanders in any organization they work with can screen several transactions and give approval for equipment dispatch.
On January 1, Power House Co. prepaid the annual rent of $10,140. Prepare the journal entry to record this transaction.
Answer and Explanation:
The journal entry to record the given transaction is shown below:
Prepaid rent Dr $10,140
To Cash $10,140
(Being the prepaid annual rent paid in cash is recorded)
For recording this we debited the prepaid rent as it increased the assets and credited the cash as it reduced the cash so that the proper posting could be done
f covered interest arbitrage opportunities do not exist, Group of answer choices interest rate parity holds. interest rate parity does not hold. interest rate parity holds, and arbitragers will be able to make risk-free profits. arbitragers will be able to make risk-free profits. interest rate parity does not hold, and arbitragers will be able to make risk-free profits.
Answer: interest rate parity holds
Explanation:
Covered interest arbitrage is a trading strategy that is used by an investor when the person whereby takes advantage of the differences in interest rate between two nations and invest in the currency that brings higher value.
If covered interest arbitrage opportunities do not exist, it simply means that interest rate parity holds.
Harver company currently produces component RX5 for its sole product. The current cost per unit to manufacture the required 58000 units of RX5 follows. Direct materials and direct labor are 100% variable. Overhead is 70% fixed. An outside supplier has offered to supply the 58000 units of RX5 for 18.50 per unit. determine the total incremental cost making 58000 units of Rx5. Determine the total incremental cost of buying 58000 units of RX5. Should the company make or buy RX%
Answer:
Decision = Make
Explanation:
The incremental cost to buy and the incremental cost to make can be calculated as follows
DATA
Direct material = $4 (100% variable)
Direct labor = $8 (100% variable)
Overhead = $9 ( 70% fixed)
Total cost per unit = $21
Offered price = $18.5 per unit
Total units = 58,000
Solution
Incremental cost of making
Direct material ( 58,000 x $4) = $232,000
Direct labor (58,000 x $8) = $464,000
Overhead ( 58,000 x $9 x 30%) = $156,600
Total cost = $825,600
Incremental cost of buying
Total cost = No. of units x offered price
Total cost = 58,000 x $18.5
Total cost = $1,073,000
Decision: The company should make the product as the total cost to buy is $247,400 higher than the cost to make.
Trevor Company discloses supplementary operating segment information for its three reportable segments. Data for 20X8 are available as follows:
Segment A Segment B Segment C
Sales $500,000 $300,000 $200,000
Traceable operating
expenses 250,000 120,000 90,000
Allocable costs for the year was $180,000. Allocable costs are assigned based on the ratio of a segment's income before allocable costs to total income before allocable costs. The 20X8 operating profit for Segment B was:_______.
A) $180,000.
B) $120,000.
C) $126,000.
D) $110,000.
Answer:
The correct answer is B.
Explanation:
Giving the following information:
Segment A Segment B Segment C
Sales $500,000 $300,000 $200,000
Traceable operating expenses 250,000 120,000 90,000
Profit= 250,000 180,000 110,000 = 540,000
Allocable costs for the year was $180,000.
First, we need to allocate costs to Segment B:
Segment B= 180,000/540,000= 0.33
Allocate= 0.33*180,000= 60,000
Now, we can calculate the profit:
Segment B profit= 180,000 - 60,000= 120,000
Welcome Inc. is a global Internet company that offers country-specific variations of its sites, keeping in mind the linguistic and religious differences between the countries. Welcome Inc. is most likely doing this to:
Answer:
reduce its cultural distance from the other countries
Explanation:
In this scenario, Welcome Inc. is most likely doing this to reduce its cultural distance from the other countries. Cultural distance refers to the differences in cultural values amongst countries, organizations, and stakeholders. In this case, Welcome Inc is trying to reduce this by making sure that they adjust their products and services to best accommodate these specific cultural differences in each country. In doing so they gain more loyal customers and increase their profits in each country which they do business in.
The IMF policies that accompany most IMF loans are typically: Multiple Choice expansionary in the short run. procyclical in the long run. contractionary in the long run. contractionary in the short run.
Answer:
contractionary in the long run
Explanation:
contractionary fiscal policy reduces spending and raises taxes. it contract the economy by reducing the amount of money that is available for businesses and for people to spend. it could reduce government expenditure or increase taxes or in other times do both. useful during inflation
Titan Mining Corporation has 7.6 million shares of common stock outstanding, 280,000 shares of 4.5% preferred stock outstanding, and 165,000 bonds with a semi-annual coupon rate of 5.9% outstanding, par value $2,000 each. The common stock currently sells for $61 per share and has a beta of 1.15, the preferred stock has a par value of $100 and currently sells for $95 per share, and the bonds have 19 years to maturity and sell for 109% of par. The market risk premium is 7.1%, T-bills are yielding 3.5%, and the company’s tax rate is 25%.
A. What is the firm’s market value capital structure?
B. If the company is evaluating a new investment project that has the same risk as the firm’s typical project, what rate should the firm use to discount the project’s cash flows?
Answer:
A. The Capital structure is : 4.23 % - Equity, 6.59 % - Preferred Shares and 89.17 % - Debt
B. The firm should discount the project’s cash flows at 4.45 %.
Explanation:
Total Market Value = Market Value of Equity + Market Value of Debt + Market Value of Preferred Shares
Market Value of Equity = 280,000 shares × $61
= $17,080,000
Market Value of Preferred Shares = 280,000 shares × $95
= $26,600,000
Market Value of Debt = 165,000 bonds × $2,000 × 109%
= $359,700,000
Total Market Value = $403,380,000
Capital Structure :
Weight of Equity = $17,080,000 / $403,380,000 × 100
= 4.23 %
Weight of Preferred Shares = $26,600,000 / $403,380,000 × 100
= 6.59 %
Weight of Debt = $359,700,000 / $403,380,000 × 100
= 89.17 %
Thus, the market value capital structure is : 4.23 % - Equity, 6.59 % - Preferred Shares and 89.17 % - Debt
Firms use the Weighted Average Cost of Capital (WACC) to discount the project’s cash flows.
Cost of Debt, r
PV = $2000 × 109 % = - $2,100
PMT = ($2,000 × 5.9%) ÷ 2 = $59
n = 19 × 2 = 38
P/YR = 2
FV = $2,000
r = ?
Using a Financial Calculator, Pretax cost of debt, r is 5,47 %
After tax cost of debt = Interest × ( 1 - tax rate)
= 5,47 % × ( 1 - 0.25)
= 4.10 %
Cost of Equity
Cost of Equity = Return on Risk Free Security + Beta × Return on Risk Premium Portfolio
= 3.5 % + 1.15 × 7.1%
= 11.67 %
Cost of Preference Stock
Cost of Preference Stocks = 4.5%
WACC = ke(W/V) + kd(D/V) + kp(P/V)
= 11.67 % × 4.23 % + 4.10 % × 89.17 % + 4.5% × 6.59 %
= 4.45 %
Though not specifically cited in the producer's contract, the producer is expected to telephone prospects on the insurer's behalf to arrange sales appointments. This is an example of what kind of producer authority?
Answer:
Implied authority
Explanation:
Implied authority defines an authority with respect to agent that involves jurisdiction to perform the acts so that the objectives of the organization could be achieved. Also, it is a binding contract on other person behalf or company
Therefore according to the given situation, this is an example of implied authority
Describe various ways that knowledge management systems could help firms with sales and marketing or with manufacturing and production.
Answer:
Please see explanation below.
Explanation:
Knowledge management system is a system that allows sales people have quick and right information about a company's value proposition without having to wait for feedback from team members or someone else in the company. An advantage of knowledge management system is the ability to train many employees remotely or places where they may be needed.
Various ways ways that knowledge management system could help sales and marketing.
•Getting sales people on the same page. A company's sales team should understand the value propositions of their firm and how such values distinct them from the competitors. Each sales member should be acquitted with the knowledge management system which provides an easily accessible place for the company's value proposition. It also means that the values should readily be known and understood by everyone and are able to apply them according to how situations demands.
• Allowing to refine and deliver a better training process. This explain that knowledge management system can assist in terms of tracking questions frequently asked by sales people , contents mostly assessed by them and activities often carried out by top sales person that bring about the best result. All the information gathered including possible answers and training contents can then be loaded into the knowledge management system to help train new hires.
• Helping to track valuable insights and information. Prospects and customers usually give useful feed back which can assist a sales team and sales representative handles future sales opportunities. It is not enough capturing these information on the knowledge management system, they should be properly organized and accessible for other team members to benefit .
• Making it easier for sales and marketing to help each other. An important part of marketing team's task is to understand the challenges faced by the target audience and the questions prospects commonly ask so as to create relevant contents for them and also upload them on the knowledge management system portal. Such information should be often accessed by the team and then take better advantage of it.
Other areas knowledge management system could help sales and marketing are assistance with sales trend, high level decisions with regards to product orders, price negotiations . etc
The Treasury bill rate is 4% and the market risk premium is 7%.
Project Beta Internal rate of return %
P 1.0 14
Q 0 6
R 2.0 18
S 0.4 7
T 1.6 20
Required:
a. What are the project costs of capital for new ventures with betas of 0.75 and 1.75?
b. Which of the following capital investments have positive NPVs?
1. P
2. Q
3. R
4. S
5. T
Answer:
the answer is going to be 3. R
assume that autonomous consumption is $1610 billion and disposable income is $11,200 billion. Using the consumption function, calculate consumption expenditure
Answer: $9,226
Explanation;
The consumption function is;
Consumption = Autonomous consumption + (Marginal Propensity to consume * Disposable income)
Marginal Propensity to Consume;
=Increase in consumption expenditure/ Increase in Disposable income
= 680/1,000
= 0.68
Consumption = Autonomous consumption + (Marginal Propensity to consume * Disposable income)
= 1,610 + ( 0.68 * 11,200)
= $9,226
TB MC Qu. 9-100 The following labor standards have been ... The following labor standards have been established for a particular product: Standard labor-hours per unit of output 9.6 hours Standard labor rate $ 13.40 per hour The following data pertain to operations concerning the product for the last month: Actual hours worked 7,400 hours Actual total labor cost $ 96,200 Actual output 950 units What is the labor efficiency variance for the month
Answer:
Direct labor time (efficiency) variance= $23,048 favorable
Explanation:
Giving the following information:
Standard labor-hours per unit of output 9.6 hours
Standard labor rate $ 13.40 per hour
Actual hours worked 7,400 hours
Actual output 950 units
To calculate the direct labor efficiency variance, we need to use the following formula:
Direct labor time (efficiency) variance= (Standard Quantity - Actual Quantity)*standard rate
Standard quantity= 9.6*950= 9,120
Direct labor time (efficiency) variance= (9,120 - 7,400)*13.4
Direct labor time (efficiency) variance= $23,048 favorable
4. Suppose you hold a PUT option on Israeli shekels with a strike price of 3.4207s/$. If the spot rate on the final day of the option is 3.4329s/$, how much profit would you make trading $1,000,000? Should you do it?
Answer:
Profit $3,567
I would exercise my option by buying the shares before the expiration .
Explanation:
Calculation of how much profit would you make trading $1,000,000
First step is to multiply the spot rate on the final day by the trading amount
3.4329s*$1,000,000
=$3,432,900
Second step is to divide the spot rate option by the strike price
3,432,900/3.4207
=$1,003,567
Last Step is to find the profit
Profit =$1,003,567-$1,000,000
Profit=$3,567
Therefore the amount of PROFIT you would make trading $1,000,000 will be $3,567
Based on the above calculation I would exercise my option by buying the shares before the expiration .
Abby had a checkbook balance of $1,002.45. She paid $76.98 to the electric company and $254.34 to the water company. What is Abby’s current checkbook balance?
Answer:
$671.13
Explanation:
Abby had a checkbook balance of $1,002.45
$76.98 was paid to the electric company
$254.34 was paid to the water company
Therefore the current checkbook balance can be calculated as follows
=$1,002.45-($76.98+$254.34)
= $1,002.45-$331.32
= $671.13
Hence Abby's current checkbook balance is $671.13
A catering company prepared and served 375 meals at an anniversary celebration last week using 3 workers. The week before, 2 workers prepared and served 225 meals at a wedding reception
a1. Calculate the labor productivity for each event. (Round your answers to 1 decimal place.) Anniversary Wedding meals/worker meals/worker
a2. For which event was the labor productivity higher?
Anniversary
Wedding
Answer:
for anniversary = 125
for wedding = 112.5
anniversary
Explanation:
Labour productivity = number of meals / total number of workers
for anniversary = 375 / 3 = 125
for wedding = 225 / 2 = 112.5
labour productivity is higher for the anniversary because one unit of labour produces more meals when compared to the wedding.
Radoski Corporation's bonds make an annual coupon interest payment of 7.35% every year. The bonds have a par value of $1,000, a current price of $1,470, and mature in 12 years. What is the yield to maturity on these bonds
Answer:
The answer is 2.71 percent
Explanation:
The interest payment is annually.
N(Number of periods) = 12 years
I/Y(Yield to maturity) = ?
PV(present value or market price) = $1,470
PMT( coupon payment) = $73.5 ( [7.35 percent x $1,000)
FV( Future value or par value) = $1,000.
We are using a Financial calculator for this.
N= 12; PV = -1470 ; PMT = 73.5; FV= $1,000; CPT I/Y= 2.71
Therefore, the Yield-to-maturity of the bond annually is 2.71 percent
A customer has purchased 10,000 shares of Fromage stock, a Swiss cheese company. The stock is not traded in the United States. Fromage declares and pays a dividend of 15,000 Swiss Francs, which, when converted to dollars, equals $10,000. Switzerland imposes a 20% withholding tax on dividends repatriated outside its borders. How is the dividend reported on this investor's U.S. tax return
Answer:
$10,000 of dividends are reported, along with a $2,000 tax credit for monies withheld in Switzerland
Explanation:
As we know that if there is a direct investment in a foreign security, so the foreign country having a tax on dividend send an individual his home country against his will now if this condition arise so the same i.e tax credit should be levy on the same person while filing the U.S tax return
Since $10,000 dividend is received along with it $2,000 would be the tax credit
You short-sell 100 shares of Tuckerton Trading Co., now selling for $44 per share. What is your maximum possible gain, ignoring transactions cost
Answer:
$4,400
Explanation:
Calculation for the maximum possible gain, ignoring transactions cost
Using this formula
Maximum possible gain = Sale proceeds - Cost of purchasing the share
Let plug in the formula
Maximum possible gain = (100 shares *$44 per shares)- (100 shares *0) = 14000
Maximum possible gain=$4,400-0
Maximum possible gain=$4,400
Therefore the maximum possible gain, ignoring transactions cost will be $4,400
The GoT cups are a fast seller and you need to ensure that you have enough rolls of paper to fulfill demand. The first stage in the process is to determine the total cost of the current inventory ordering model. Given the following information, how many rolls should they order to minimize costs?H: $1.75 per unitD: 500 rolls per monthQ: 100 units ordered at a timeS: $25 per order
Answer:
EOQ = 414 rolls
Explanation:
In order to calculate the number of orders to minimize the cost, we should calculate that by using the Economic order quantity model.
DATA
Holding cost = $1.75/unit
Annual demand = 500 rolls x 12 = 6000 rolls
Ordering cost = $25
Formula
EOQ =[tex]\sqrt{\frac{2Cod}{Ch} }[/tex]
Where
Co = ordering cost
D = Annual demand
Ch = Holding cost
Solution
EOQ = [tex]\sqrt{\frac{2(6000)(25)}{1.75} }[/tex]
EOQ = [tex]\sqrt{\frac{300000}{1.75} }[/tex]
EOQ = 414 rolls
They should order 414 rolls to minimize the cost.
Answer:
119 units
Explanation:
The economic order quantity is the minimum amount of inventory that a seller must keep to demand and lower the holding cost. The ordering cost is $25 per order. Holding cost is $1.75 per unit. The total demand is 500 units per month. The economic order quantity that will minimize the cost of the GoT cups is
EOQ = [tex]\sqrt{\frac{2*Demand*ordering cost}{Holding cost} }[/tex]
EOQ is 119 units.
Carpenter Corporation uses the weighted-average method in its process costing system. This month, the beginning inventory in the first processing department consisted of 2,400 units. The costs and percentage completion of these units in beginning inventory were: 2 points Percent Complete 60% 55% Cost $ 7,000 $10,300 Materials costs Conversion costs 01:53:47 A total of 10,500 units were started and 8.900 units were transferred to the second processing department during the month. The following costs were incurred in the first processing department during the month: eBook Materials costs Conversion costs $ 96,800 $171,000 References The ending inventory was 85% complete with respect to materials and 70% complete with respect to conversion costs.
How many units are in ending work in process inventory in the first processing department at the end of the month?
a. 4,000
b. 1,800
c. 8.100
d. 1,600
Answer:
a. 4,000
Explanation:
Units in ending inventory
= Units in beginning work in process + Units started into production - Units transferred to the next department
= 2,400 + 10,500 - 8,900
= 4,000 units
the frequency of deposits of federal income taxes withheld and social security and medicare taxes is
Answer: A) amount of the tax liability.
Explanation:
Federal taxes like income taxes withheld and social security and Medicare taxes are mandated to be paid by the IRS depending on the amount of tax liability that is owed.
For 2020 for instance, if in a company's tax lookback period it owed $50,000 or less than $50,000 in tax liability, the company should be a monthly depositor. If however, the company owed more than $50,000 then it is to be a semi-weekly depositor.
Answer:
✓ amount of the tax liability.
Explanation:
The frequency of deposits of federal income taxes withheld and social security and Medicare taxes is most dependent on the:
A manager is attempting to assess the probability of a recession ending in the next six months and its impact on expected profitability. The manager believes there is a 75 percent chance the recession will end in six months and profits will return to $400 million. However, there is a 25 percent chance the recession will not end in six months, resulting in a $5 million loss. The expected profits over the next six months are:
Answer:
Expected profit = $298.75 million
Explanation:
To calculate the expected return or expected profits, we will simply multiply the probability of each event by the return expected in that event and take a sum the answers. Thus, the expected profit can be calculated as follows,
Expected profit = Probability of recession ending * Profit if recession ends + Probability of recession not ending * profit or loss if recession does not end
Expected profit = 0.75 * 400 + 0.25 * -5
Expected profit = $298.75 million
3. “The International Monetary Fund (IMF) and the World Bank are two institutions that have outlived their usefulness”. Do you agree?
Answer:
“The International Monetary Fund (IMF) and the World Bank"
Have they outlived their usefulness?
No.
The IMF and the World Bank have not outlived their usefulness. They remain very useful and relevant to our world today. The problem they have experienced stem in part from the neglect of their purposes, because of the near-absence of the grassroot touch. They can refocus on their purposes and reduce elitistism, and then they continue to be useful.
But, they cannot rediscover and concentrate on their purposes without the cooperation of member-countries. Recalcitrancy does not allow any organized institutions without police power to function at their best. Member-countries must learn to cooperate with these bodies to achieve their purposes. There is still global poverty ravaging the world population, even among the rich and developed countries of the world.
In most developing countries, their national governments are traditionally entrenched as anti-developmental. While they make long and meaningless speeches at world fora, back home they do not walk their talk and so often renege on their promises. This is why it seems that the impact of these world bodies are not being felt. National governments must be able to show responsibility to allow the effects of monetary policies and agreements to benefit the poor and the vulnerable.
Explanation:
The World Bank is an international body of the United Nations with about 189 member-countries. It works with developing countries to reduce poverty, increase access to wealth, and promote global prosperity. The IMF is responsible for ensuring that the international monetary system is operational and stable to ginger sustainable global economic growth.
The open interest on silver futures at a particular time is the Group of answer choices number of all long or short silver futures contracts outstanding. number of silver futures contracts traded during the day. number of silver futures contracts traded the previous day. number of outstanding silver futures contracts for delivery within the next month.
Answer:
number of all long or short silver futures contracts outstanding.
Explanation:
The open interest on silver futures at a particular time is the number of all long or short silver futures contracts outstanding. Open interest can be defined as the total or overall number of contracts (open long and short positions) outstanding in a futures market.
In stocks exchange, when a contract begins trading it has an open interest that is equal to zero and in future dates, more contracts are entered into as time passes by.
Additionally, majority of the contracts are liquidated before their maturity date.
In 2019, Tim sells Section 1245 property for $28,000 that he had purchased in 2009. Tim has claimed $5,000 in depreciation on the property and originally purchased it for $15,000. How much of the gain is taxable as ordinary income?
Answer:
The taxable amount at an ordinary rate = $5000
Explanation:
The selling price of a property in 2019 is = $28000
The depreciation on the property = $5000
Original purchased price of property = $15000
Adjusted tax = an orginal price – depreciation
Adjusted tax = 15000 – 5000 = $10000
Gain = selling price – adjusted tax
Gain = 28000 – 10000 = $18000
The part of gain ($18000) that is taxable as ordinary rate = $5000
Here, $13000 will be taxed as section 1231 as a gained tax at capital gain rate.
