Determine which set of properties correctly describes copper (Cu)?
A. Giant structure, conducts electricity, high melting point, soluble in water, malleable
B. Malleable, brittle, soluble in oil or gasoline, high melting point, simple structure
C. Ionic lattice, conducts electricity, soluble in oil or gasoline, low melting point, ductile
D. Malleable, conducts electricity, high melting point, giant structure, metallic lattice

Answers

Answer 1

Answer:

D. Malleable, conducts electricity, high melting point, giant structure, metallic lattice

Explanation:

Copper is a metal with an atomic number of 29. This metal is soft and reddish in color which explains why it is very malleable(beaten to form various shapes without breaking).

All metals are good conductors of electricity including copper which is also a metal. Metals generally are insoluble in water. Copper also has a high melting point which is a characteristic of metals due to their giant structure and metallic lattice which makes it difficult to be broken down.


Related Questions

What is the energy of a photon of electromagnetic radiation with a wavelength of 963.5 nm?​ (c = 3.00 × 108 m/s, h = 6.63 × 10–34 J · s

Answers

Answer:

[tex]E=2.06\times 10^{-19}\ J[/tex]

Explanation:

Given that,

The wavelength of electromagnetic radiation is 963.5 nm.

We need to find the energy of a photon with this wavelength.

The formula used to find the energy of a photon is given by :

[tex]E=\dfrac{hc}{\lambda}\\\\E=\dfrac{6.63\times 10^{-34}\times 3\times 10^8}{963.5\times 10^{-9}}\\\\E=2.06\times 10^{-19}\ J[/tex]

So, the energy of a photon is [tex]2.06\times 10^{-19}\ J[/tex].

What is advertising used for? Check all that apply. influencing consumer tastes tracking product popularity increasing product awareness promoting company branding gathering data about potential consumers

Answers

Answer:

influencing consumer tastes

increasing product awareness

promoting company branding

Explanation:

Advertising is basically a form of communication using creative ideas and communicating benefits of the products. Advertising plays a very crucial role in product business and some of the important uses of advertising are as follows:

Creative advertisements, influence customers or consumers to buy the product.Advertisings involve information regarding the product and so increases product awareness.Advertising on social media platforms, TVs, radio and newspapers, promotes company branding.

Hence, the correct options are:

influencing consumer tastesincreasing product awarenesspromoting company branding

Answer:

1,3,4

Explanation:

I took the test

If the rate of formation (also called rate of production) of compound C is 2M/s in the reaction A --->2C, what is the rate of consumption of A

Answers

Answer:

[tex]r_A=-1\frac{M}{s}[/tex]

Explanation:

Hello,

In this case, given the rate of production of C, we can compute the rate of consumption of A by using the rate relationships which include the stoichiometric coefficients at the denominators (-1 for A and 2 for C) as follows:

[tex]\frac{1}{-1} r_A=\frac{1}{2}r_C[/tex]

In such a way, solving the rate of consumption of A, we obtain:

[tex]r_A=-\frac{1}{2} r_C=-\frac{1}{2}*2\frac{M}{s}\\ \\r_A=-1\frac{M}{s}[/tex]

Clearly, such rate is negative which account for consumption process.

Regards.

Does the amount of methanol increase, decrease, or remain the same when an equilibrium mixture of reactants and products is subjected to the following changes?

a. the catalyst is removed
b. the temp is increased
c. the volume is decreased
d. helium is added
e. CO is added

Answers

Answer:

a. Methanol remains the same

b. Methanol decreases

c. Methanol increases

d. Methanol remains the same

e. Methanol increases

Explanation:

Methanol is produced by the reaction of carbon monoxide and hydrogen in the presence of a catalyst as follows; 2H2+CO→CH3OH.

a) The presence or absence of a catalyst makes no difference on the equilibrium position of the system hence the methanol remains constant.

b) The amount of methanol decreases because the equilibrium position shifts towards the left and more reactants are formed since the reaction is exothermic.

c) If the volume is decreased, there will be more methanol in the system because the equilibrium position will shift towards the right hand side.

d) Addition of helium gas has no effect on the equilibrium position since it does not participate in the reaction system.

e) if more CO is added the amount of methanol increases since the equilibrium position will shift towards the right hand side.

A piece of solid Fe metal is put into an aqueous solution of Cu(NO3)2. Write the net ionic equation for any single-replacement redox reaction that may be predicted. Assume that the oxidation state of in the resulted solution is 2 . (Use the lowest possible coefficients for the reaction. Use the pull-down boxes to specify states such as (aq) or (s). If a box is not needed, leave it blank. If no reaction occurs, leave all boxes blank and click on Submit.)

Answers

Answer:

Fe(s) + Cu^2+(aq) ---> Fe^2+(aq) + Cu(s)

Explanation:

The ionic equation shows the actual reaction that took place. It excludes the spectator ions. Spectator ions are ions that do not really participate in the reaction even though they are present in the system.

For the reaction between iron and copper II nitrate, the molecular reaction equation is;

Fe(s) + Cu(NO3)2(aq)----> Fe(NO3)2(aq) +Cu(s)

Ionically;

Fe(s) + Cu^2+(aq) ---> Fe^2+(aq) + Cu(s)

When titrating a strong acid with a strong base, after the equivalence point is reached, the pH will be determined exclusively by: Select the correct answer below:
A) hydronium concentration
B) hydroxide concentration
C) conjugate base concentration
D) conjugate acid concentration

Answers

Answer:

B) hydroxide concentration

Explanation:

Hello,

In this case, since we are talking about strong both base and acid, since the base is the titrant and the acid the analyte, once the equivalence point has been reached, some additional base could be added before the experimenter realizes about it, therefore, since the titrant is a strong base, it completely dissociates in hydroxide ions and metallic ions which allows us to compute the pOH of the solution by known the hydroxide ions concentration.

After that, due to the fact that the pH is related with the pOH as shown below:

pH=14-pOH

We can directly compute the pH.

Best regards.

Consider these metal ion/metal standard reduction potentials Cd2+(aq)|Cd(s) Zn2+(aq)|Zn(s) Ni2+(aq)|Ni(s) Cu2+(aq)|Cu(s) Ag+(aq)|Ag(s) -0.40 V -0.76 V ‑0.25 V +0.34 V +0.80 V Based on the data above, which species is the best reducing agent?

Answers

Answer:

The best reducing agent is Zn(s)

Explanation:

A reducing agent must to be able to reduce another compound, by oxidizing itself. Consequently, the oxidation potential must be high. The oxidation potential of a compound is the reduction potential of the same compound  with the opposite charge. Given the reduction potentials, the best reducing agent will be the compound with the most negative reduction potential. Among the following reduction potentials:

Cd₂⁺(aq)|Cd(s) ⇒ -0.40 V

Zn²⁺(aq)|Zn(s) ⇒ -0.76 V

Ni²⁺(aq)|Ni(s) ⇒‑0.25 V

Cu²⁺(aq)|Cu(s) ⇒ +0.34 V

Ag⁺(aq)|Ag(s) ⇒ +0.80 V

The most negative is Zn²⁺(aq)|Zn(s) ⇒ -0.76 V

From this, the most reducing agent is Zn. Zn(s) is oxidized to Zn²⁺ ions with the highest oxidation potential (0.76 V).

What is the mass number of an element

Answers

Answer:

A (Atomic mass number or Nucleon number)

Explanation:

The mass number is the total number of protons and nucleons in an atomic nucleus.

Hope this helps.

Please mark Brainliest...

A galvanic cell consists of a Cu(s)|Cu2+(aq) half-cell and a Cd(s)|Cd2+(aq) half-cell connected by a salt bridge. Oxidation occurs in the cadmium half-cell. The cell can be represented in standard notation as

Answers

Answer:

[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]

Explanation:

A galvanic cell is composed of two electrodes immersed in a suitable electrolyte and connected via a salt bridge. One of the electrodes serves as a cathode where reduction or gain of electrons takes place. The other half cell functions as an anode where oxidation or loss of electrons occurs.

The representation is given by writing the anode on left hand side followed by its ion with its molar concentration. It is followed by a salt bridge. Then the cathodic ion with its molar concentration is written and then the cathode.

As it is given that cadmium acts as anode, it must be on the left hand side and copper must be on right hand side.

[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]

What is the ph of 0.36M HNO3 ?

Answers

Answer:

0.44

Explanation:

We know that the pH of any acid solution is given by the negative logarithm of its hydrogen ion concentration. Hence, if I can obtain the hydrogen ion concentration of any acid, I can obtain its pH.

For the acid, HNO3, [H^+] = [NO3^-]= 0.36 M

pH= -log [H^+]

pH= - log[0.36]

pH= 0.44

Write the half-reactions as they occur at each electrode and the net cell reaction for this electrochemical cell containing indium and cadmium. In(s)|

Answers

Answer:

Oxidation half equation;

3Cd(s) -------> 3Cd^2+(aq) + 6e

Reduction half equation;

2In^3+(aq) + 6e -----> 2In(s)

Explanation:

Since the reduction potentials of Indium and Cadmium are -0.34 V and - 0.40 V respectively, we can see that cadmium will be oxidized while indium will the reduced.

We arrived at this conclusion by examining the reduction potential of both species. The specie with more negative reduction potential is oxidized in the process.

Oxidation half equation;

3Cd(s) -------> 3Cd^2+(aq) + 6e

Reduction half equation;

2In^3+(aq) + 6e -----> 2In(s)


How has the work of chemists affected the environment over the years?

Answers

Answer:

Chemistry is one of the causes for global warming, and in some cases it can even cause certain illnesses.

Answer:

Chemists have both hurt the environment and helped the environment by their actions.

Explanation:

<3

We discussed the different types of intermolecular forces in this lesson, which can affect the boiling point of a substance.
1. Which of these has the highest boiling point?
A) Ar
B) Kr
C) Xe
D) Ne
2. Which substance has the highest boiling point?
A) CH4
B) He
C) HF
D) Cl2

Answers

Answer:

1, C, Xe 2, B,He

Explanation:

1, cause as u go down a group the boiling point increases.

2, boiling point of single element is greater than a compound

According to  periodic trends in periodic table boiling point increases down the  group and hence Xe has highest boiling point and more amount of heat is required to boil an element hence He has highest boiling point.

What is periodic table?

Periodic table is a tabular arrangement of elements in the form of a table. In the periodic table, elements are arranged according to the modern periodic law which states that the properties of elements are a periodic function of their atomic numbers.

It is called as periodic because properties repeat after regular intervals of atomic numbers . It is a tabular arrangement consisting of seven horizontal rows called periods and eighteen vertical columns called groups.

Elements present in the same group have same number of valence electrons and hence have similar properties while elements present in the same period show gradual variation in properties due to addition of one electron for each successive element in a period.

Learn more about periodic table,here:

https://brainly.com/question/11155928

#SPJ2

If one pound is the same as 454 grams, then convert the mass of 78 grams to pounds.

Answers

Answer:

0.17 lb

Explanation:

78 g * (1 lb/454 g)=0.17 lb

If you want additional help with chemistry or another subject for FREE, check out growthinyouth.org.

Compound has a molar mass of and the following composition: elementmass % carbon47.09% hydrogen6.59% chlorine46.33% Write the molecular formula of .

Answers

The given question is incomplete. The complete question is:

Compound X has a molar mass of 153.05 g/mol and the following composition:

element mass %

carbon 47.09%

hydrogen 6.59%

chlorine 46.33%

Write the molecular formula of X.

Answer: The molecular formula of X is [tex]C_6H_{10}Cl_2[/tex]

Explanation:

If percentage are given then we are taking total mass is 100 grams.

So, the mass of each element is equal to the percentage given.

Mass of C= 47.09 g

Mass of H = 6.59 g

Mass of Cl = 46.33 g

Step 1 : convert given masses into moles.

Moles of C =[tex]\frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{47.09g}{12g/mole}=3.92moles[/tex]

Moles of H =[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{6.59g}{1g/mole}=6.59moles[/tex]

Moles of Cl =[tex]\frac{\text{ given mass of Cl}}{\text{ molar mass of Cl}}= \frac{46.33g}{35.5g/mole}=1.30moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For C = [tex]\frac{3.92}{1.30}=3[/tex]

For H = [tex]\frac{6.59}{1.30}=5[/tex]

For Cl =[tex]\frac{1.30}{1.30}=1[/tex]

The ratio of C : H: Cl= 3: 5 :1

Hence the empirical formula is [tex]C_3H_5Cl[/tex]

The empirical weight of [tex]C_3H_5Cl[/tex] = 3(12)+5(1)+1(35.5)= 76.5g.

The molecular weight = 153.05 g/mole

Now we have to calculate the molecular formula.

[tex]n=\frac{\text{Molecular weight }}{\text{Equivalent weight}}=\frac{153.05}{76.5}=2[/tex]

The molecular formula will be=[tex]2\times C_3H_5Cl=C_6H_{10}Cl_2[/tex]

In which of the following compounds does the carbonyl stretch in the IR spectrum occur at the lowest wavenumber?

a. Cyclohexanone
b. Ethyl Acetate
c. λ- butyrolactone
d. Pentanamide
e. Propanoyl Chloride

Answers

Answer:

a. Cyclohexanone

Explanation:

The principle of IR technique is based on the vibration of the bonds by using the energy that is in this region of the electromagnetic spectrum. For each bond, there is a specific energy that generates a specific vibration. In this case, you want to study the vibration that is given in the carbonyl group C=O. Which is located around 1700 cm-1.

Now, we must remember that the lower the wavenumber we will have less energy. So, what we should look for in these molecules, is a carbonyl group in which less energy is needed to vibrate since we look for the molecule with a smaller wavenumber.

If we look at the structure of all the molecules we will find that in the last three we have heteroatoms (atoms different to carbon I hydrogen) on the right side of the carbonyl group. These atoms allow the production of resonance structures which makes the molecule more stable. If the molecule is more stable we will need more energy to make it vibrate and therefore greater wavenumbers.

The molecule that fulfills this condition is the cyclohexanone.

See figure 1

I hope it helps!

243
Am
95
1. The atomic symbol of americium-243 is shown. Which of the following is correct?
• A. The atomic mass is 243 amu, and the atomic number is 95.
B. The atomic mass is 338 amu, and the atomic number is 95.
• C. The atomic mass is 95 amu, and the atomic number is 243.
D. The atomic mass is 243 amu, and the atomic number is 338.​

Answers

Answer:

A. The atomic mass is 243 amu, and the atomic number is 95.

When methane is burned with oxygen, the products are carbon dioxide and water. If you produce 9 grams of water and 11 grams of carbon dioxide from 16 grams of oxygen, how many

Answers

The given question is incomplete.

The complete question is:

When methane is burned with oxygen, the products are carbon dioxide and water. If you produce 9 grams of water and 11 grams of carbon dioxide from 16 grams of oxygen, how many grams of methane were needed for the reaction?

Answer: 4 grams of methane were needed for the reaction

Explanation:

According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.

{tex]CH_4+2O_2\rightarrow CO_2+H_2O[/tex]

Given:  mass of oxygen = 16 g

Mass of carbon dioxide = 11 g

Mass of water = 9 g

Mass of products = Mass of carbon dioxide + mass of water = 11 g  +9 g = 20 g

Mass or reactant = mass of methane + mass of oxygen = mass of methane + 16 g

As mass of reactants = mass of products

mass of methane + 16 g= 20 g

mass of methane  = 4 g

Thus 4 grams of methane were needed for the reaction

A sample of ammonia gas was allowed to come to equilibrium at 400 K. 2NH3(g) <----> N2(g) 3H2(g) At equilibrium, it was found that the concentration of H2 was 0.0484 M, the concentration of N2 was 0.0161 M, and the concentration of NH3 was 0.295 M. What was the initial concentration of ammonia

Answers

Answer:

0.327 M

Explanation:

Step 1: Write the balanced equation

2 NH₃(g) ⇄ N₂(g) + 3H₂(g)

Step 2: Make an ICE chart

        2 NH₃(g) ⇄ N₂(g) + 3 H₂(g)

I              x             0            0

C          -2y            +y         +3y

E         x-2y             y           3y

Step 3: Find the value of y

The concentration of N₂ at equilibrium is 0.0161 M. Then,

y = 0.0161

Step 4: Find the value of x

The concentration of NH₃ at equilibrium is 0.295 M. Then,

x-2y = 0.295

x-2(0.0161) = 0.295

x = 0.327

Fill in the blanks with the words given below- [Atoms, homogeneous, metals, true, saturated, homogeneous, colloidal, compounds, lustrous] 1.An element which are sonorous are called................ 2.An element is made up of only one kind of .................... 3.Alloys are ............................. mixtures. 4.Elements chemically combines in fixed proportion to form ........................ 5. Metals are................................... and can be polished. 6. a solution in which no more solute can be dissolved is called a .................... solution. 7. Milk is a .............. solution but vinegar is a .................. solution. 8. A solution is a ................... mixture. pls help, could not get these answers

Answers

Answer:

1. metals

2. atom

3. homogeneous

4. compounds

5. lustrous

6. saturated

7. colloidal

8. homogeneous

Explanation:

"What is the difference between the revertible and nonrevertible rII mutants that Benzer generated?"

Answers

The difference is that revertible is u are able to change back and get back what u once had non revertible is the opposite meaning,u can’t have what u once had.

Calculate the molarity of a solution containing 29g of glucose (C 6 H 12 O 6 ) dissolved in 24.0g of water. Assume the density of water is 1.00g/mL.

Answers

Answer:

whats the ph  ofpoh=9.78

Explanation:

A 1.0 L buffer solution is 0.250 M HC2H3O2 and 0.050 M LiC2H3O2. Which of the following actions will destroy the buffer?

A. adding 0.050 moles of NaOH
B. adding 0.050 moles of LiC2H3O2
C. adding 0.050 moles of HC2H3O2
D. adding 0.050 moles of HCl
E. None of the above will destroy the buffer.

Answers

Answer:

D

Explanation:

Addition of 0.05 M HCl, will react with all of the C2H3O2- from LiAc which will give 0.05 M more HAc. So there will be no Acetate ion left to make the solution buffer. Hence, the correct option for the this question is d, which is adding 0.050 moles of HCl.

The action that destroys the buffer is option c. adding 0.050 moles of HCl.

What is acid buffer?

It is a solution of a weak acid and salt.

Here, The buffer will destroy at the time when either HC2H3O2 or NaC2H3O2 should not be present in the solution.

The addition of equal moles of HCl finishly reacts with equal moles of NaC2H3O2. Due to this,  there will be only acid in the solution.

Since

moles of HC2H3O2 = 1*0.250 = 0.250

moles of NaC2H3O2 = 1*0.050 = 0.050.

moles of HCl is added = 0.050

Now

The reaction between HCl and NaC2H3O2

[tex]HCl + NaC_2H_3O_2 \rightarrow HC_2H_3O_2 + NaCl[/tex]

Now

BCA table is

            NaC2H3O2  HCl       HC2H3O2

Before 0.050 0.050 0.250

Change -0.050 -0.050 +0.050

After 0 0 0.300

Now, the solution contains the acid (HC2H3O2 ) only.

Therefore addition of 0.050 moles of HCl will destroy the buffer.

Learn more about moles here: https://brainly.com/question/24817060

Calculate the amount of heat that must be absorbed by 10.0 g of ice at –20°C to convert it to liquid water at 60.0°C. Given: specific heat (ice) = 2.1 J/g·°C; specific heat (water) = 4.18 J/g·°C; ΔH fus = 6.0 kJ/mol.

Answers

Answer:

The amount of heat to absorb is 6,261 J

Explanation:

Calorimetry is in charge of measuring the amount of heat generated or lost in certain physical or chemical processes.

The total energy required is the sum of the energy to heat the ice from -20 ° C to ice of 0 ° C, melting the ice of 0 ° C in 0 ° C water and finally heating the water to 60 ° C.

So:

Heat required to raise the temperature of ice from -20 °C to 0 °C

Being the sensible heat of a body the amount of heat received or transferred by a body when it undergoes a temperature variation (Δt) without there being a change of physical state (solid, liquid or gaseous), the expression is used:

Q = c * m * ΔT

Where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation (ΔT=Tfinal - Tinitial).

In this case, m= 10 g, specific heat of the ice= 2.1 [tex]\frac{J}{g*C}[/tex] and ΔT=0 C - (-20 C)= 20 C

Replacing: Q= 10 g*2.1 [tex]\frac{J}{g*C}[/tex] *20 C and solving: Q=420 J

Heat required to convert 0 °C ice to 0 °C water

The heat Q necessary to melt a substance depends on its mass m and on the called latent heat of fusion of each substance:

Q= m* ΔHfusion

In this case, being 1 mol of water= 18 grams: Q= 10 g*[tex]6.0 \frac{kJ}{mol} *\frac{1 mol of water}{18 g}[/tex]= 3.333 kJ= 3,333 J (being kJ=1,000 J)

Heat required to raise the temperature of water from 0 °C to 60 °C

In this case the expression used in the first step is used, but being: m= 10 g, specific heat of the water= 4.18 [tex]\frac{J}{g*C}[/tex] and ΔT=60 C - (0 C)= 60 C

Replacing: Q= 10 g*4.18 [tex]\frac{J}{g*C}[/tex] *60 C and solving: Q=2,508 J

Finally, Qtotal= 420 J + 3,333 J + 2,508 J

Qtotal= 6,261 J

The amount of heat to absorb is 6,261 J

The amount of heat to absorb is 6,261 J.

Calculation for heat:

Heat required to raise the temperature of ice from -20 °C to 0 °C.

The formula for specific heat is used to calculate the amount of heat

Q = c * m * ΔT

Where,

Q =heat exchanged by a body,

m= mass of the body

c= specific heat

ΔT= change in temperature

Given:

m= 10 g,

specific heat of the ice= 2.1

ΔT=0 C - (-20 C)= 20 C

On substituting the values:

Q= 10 g*2.1  *20 C

Q=420 J

Heat required to convert 0 °C ice to 0 °C water.

The heat Q necessary to melt a substance depends on its mass m and on the called latent heat of fusion of each substance:

Q= m* ΔHfusion

Heat required to raise the temperature of water from 0 °C to 60 °C

m= 10 g,

Specific heat of the water= 4.18  

ΔT=60 C - (0 C)= 60 C

On substituting:

Q= 10 g*4.18  *60 C

Q=2,508 J

Thus, Qtotal= 420 J + 3,333 J + 2,508 J

Qtotal= 6,261 J

The amount of heat to absorb is 6,261 J

Find more information about Specific heat here:

brainly.com/question/13439286

Other Questions
Please answer this question now Write and solve an equation to answer the question. How many people must attend the third show so that the average attendance per show is 3000? Your client is 40 years old; and she wants to begin saving for retirement, with the first payment to come one year from now. She can save $5,000 per year; and you advise her to invest it in the stock market, which you expect to provide an average return of 9% in the future. HELP ME PLZZZ!! ILL MARK YOU BRAINLIEST Which statement is an ineffective claim? Fast food restaurants are dangerous to America's youth. The driving age should be raised for three clear reasons. The United States should increase spending for nuclear power. Violent video games make teenagers more violent. what is the value of this expression when g= -3.5?8-|2g-5|a. 20b. 10c. 6d. -4 Q1: You have to select an idea developing an application like web/mobile or industrial, it should be based on innovative idea, not just a simple CRUD application. After selecting the idea do the following: 1) How your project will be helpful and what problem this project addresses. (10-Marks) 2) Write down the requirements. (10Marks) 3) List the functional and non-functional requirements of your project. (10marks) 4) Which process model you will follow for this project and why? (10marks) 5) Draw the Level 0, and level 1 DFD of your application. (20marks) What is the area of polygon EFGH? limit chapter~ anyone can help me with these questions?please gimme clear explanation :) What two factors determine how much potential energy an object has? Plz Help I Will Mark Brainliest If Right f(x) = x^2 + 3 A). y > -3 B). All real numbers C). y 3 D). y 3 State if the triangles are similar. If so, how do you know they are similar and complete the similarity statement. Triangle LKJ____ Andrea hired Jack to be the sales agent for her paintings. However, in a month's time, she terminated the agency with Jack. Harold, a customer who had dealt with Jack earlier, was not aware of the termination. Harold approached Jack to buy a painting and wrote him a check of $5,000, the advance payment for the painting which Jack promised would be delivered in two weeks. When Jack did not contact Harold later, Harold demanded that Andrea honor the contract, since Jack sold the picture as her agent. Which of the following is true of this situation?A. Since Jack had apparent authority, Andrea is liable to honor his contract with Harold.B. Harold's duty was to contact Andrea. His failure to do this removes her liability to honor the contract.C. Jack had express authority as Andrea's agent, which is not terminated with the termination of their agency.D. As Andrea terminated the agency with Jack in violation of his rights, Jack has the direct authority to sell her paintings. A project has estimated annual net cash flows of $56,600. It is estimated to cost $339,600.Required:Determine the cash payback period. With the same block-spring system from above, imagine doubling the displacement of the block to start the motion. By what factor would the following change?A. Kinetic energy when passing through the equilibrium position. B. Speed when passing through the equilibrium position. Find the value of x. A: 15 B: 12 C: 10 D: 8 Ahmad has some files.He gaveof the files and had 14 files left.5How many files did he have at first? Evaluate. Write in standard form. Why is it necessary to separate oxgynated blood and deoxgynated blood in living organisums? A box is filled with 8 blue cards, 6 red cards, and 6 yellow cards. A card is chosen at a random from the box. What is the probability that the card is not red ? Write your answer as a fraction. Find the missing side or angle.Round to the nearest tenth.