From the following, select the ways in which Titan resembles early Earth. (Choose all that apply.) a. It has a thick atmosphere. b. Its atmosphere is mostly nitrogen. c.…From the following, select the ways in which Titan resembles early Earth. (Choose all that apply.)a. It has a thick atmosphere.b. Its atmosphere is mostly nitrogen.c. It has liquid water on the surface.d. It has terrain similar to Earth's.e. It is rich in organic compounds.

At a divergent plate boundary, the plates are moving away from each other. This type of plate boundary is typically associated with less explosive eruptions.

Eruptions in this type of setting are usually composed of basaltic magma, which is low in silica content and very fluid.

These eruptions produce lava flows and rarely cause ash and pyroclastic flows. Since the viscosity of basaltic magma is low, gas bubbles can escape easily and cause less explosive eruptions.

At a convergent plate boundary, the plates are pushing together. This type of plate boundary is typically associated with explosive eruptions.

Eruptions in this type of setting are usually composed of andesitic or rhyolitic magma, which is high in silica content and more viscous than basaltic magma.

These eruptions produce ash and pyroclastic flows, and can be more explosive due to the higher viscosity of andesitic or rhyolitic magma.

The gas bubbles are more difficult to escape, so pressure builds up and causes more explosive eruptions.

To know ABOUT explosive eruptions:

https://brainly.com/question/1601925#

#SPJ11

The movement of the P and S waves through the earth reveals information about the earth's interior.

The P and S waves are produced as a result of an earthquake. The seismic waves are sent through the earth's interior as a result of an earthquake.

The P waves can travel through solid, liquid, or gaseous materials.

The S waves, on the other hand, are unable to pass through a liquid. They can only travel through solids. Therefore, it can be inferred that the Earth's outer core is liquid, as S waves are not transmitted through it.

The P waves' speed varies depending on the material they pass through. This varies as the density of the material through which the wave is passing varies. Therefore, it is safe to say that the earth's interior is made up of varying densities. This is also responsible for the P wave's reflection and refraction. P waves that move through denser materials are refracted while P waves that move through less dense materials are reflected.

Scientists have used this data to make predictions about the Earth's interior. Tectonics refers to the movement of the earth's plates. Tectonic plates can be shifted by the pressure of these waves. Tectonic plates in the earth's lithosphere can be affected by this motion.

The study of the properties of the P and S waves helps to explain a mechanism for plate tectonics. The waves' movement and characteristics provide data that help scientists better understand the dynamics of the Earth's interior. This data can help scientists make predictions about how the earth's plates will move in the future. The study of tectonics is crucial because it helps to explain volcanic and earthquake activity.

Learn more about plate tectonics:

https://brainly.com/question/2325633

#SPJ11

Climate change is responsible for exacerbating the impacts of natural disasters, including floods, droughts, hurricanes, and tornadoes.

The following is how climate change affects the intensity and frequency of each of these natural disasters:

Floods: Because of global warming, the atmosphere is warmer and carries more moisture. As a result, rainfall events, particularly heavy downpours and floods, have become more frequent and severe. Since warmer air can hold more moisture, the amount of rainfall that occurs during these extreme weather events is more than before.

Droughts: The frequency and intensity of droughts are predicted to rise as a result of climate change. The temperature increase would lead to more droughts in some regions due to higher evaporation rates, reducing soil moisture and increasing the potential for wildfires, which may lead to water scarcity.

Hurricanes: Due to rising temperatures, the sea surface temperature has also increased, causing ocean temperatures to rise, resulting in stronger hurricanes. Stronger winds and more rainfall are also anticipated as a result of climate change.

Tornadoes: Climate change is not linked to the frequency of tornadoes. However, tornadoes may occur more frequently due to climate change, which makes the weather more unstable and erratic. There may be a greater number of severe weather events as a result of this.

Learn more about climate change at

https://brainly.com/question/28779953

#SPJ11

Option c. is the correct answer. Numeric dating is accomplished by assigning ages in years to rocks using relative dating methods.

Relative dating is the process of comparing different items to determine the age of an item relative to the other items.

It does not provide an exact age for a rock, but rather allows us to determine the age of a rock relative to other rocks or events.

For example, a rock layer that is lower than another rock layer must have formed before the upper layer.

Relative dating is used to determine the age of rocks by looking at the order in which they were formed and their positions in the stratigraphic column.

It is also used to compare and contrast different objects to determine their age.

For example, if two rocks have the same relative age, they are both older than any rock found above them and younger than any rock found below them.

Relative dating is based on the assumption that certain layers of rock were deposited at a certain time in the past, and that the ages of the layers can be determined by comparing them to one another.

This method does not provide an exact age, but it can provide a general range for the age of the rock.

Additionally, relative dating can be used to infer the age of fossils found in sedimentary rocks.

Relative dating is an important tool for understanding Earth’s history, as it allows us to place events in the correct temporal order.

By understanding the ages of different rocks and fossils, scientists can determine the rate of changes in Earth’s environment over time.

This is an important tool in reconstructing past environments and determining the history of the Earth.

To know more about Numeric Dating here

https://brainly.com/question/30838987

#SPJ11

The soil will have increased salinity, leading to soil erosion and reduced nutrients in the soil for plant health. this can be the effect of commercial agriculture.

The phrase "commercial agriculture" is frequently used to describe industrial-sized farming. But, in a legal sense, even operating a tiny produce stand is considered commercial agriculture. When food is grown commercially, it is done so to sell it. Marketing includes marketing to or through a variety of outlets, such as produce stands nearby, supermarkets, wholesalers, foreign nations, and restaurants. Due to the fact that commercial agriculture generates income that goes towards a nation's gross domestic product, it is often preferred to subsistence farming. As a result, governments frequently provide financial assistance to commercial farms in an effort to boost output. Commercial farms strive to optimise yields at the lowest possible cost because their business model depends on revenues.

Learn more about commercial agriculture here:

https://brainly.com/question/28768845

#SPJ1

Rock that has formed from lithification of any type of sediment, including clastic or chemical sediments, or organic remains is known as sedimentary rock. Therefore the correct option is option G.

Sedimentary rocks are classified into three groups. These are: clastic, chemical, and organic sedimentary rocks. Clastic sedimentary rocks

Clastic sedimentary rocks are made up of pre-existing rock fragments that have been eroded, transported, and deposited by wind, water, or ice. Examples of clastic rocks are shale, sandstone, and conglomerate.

Chemical sedimentary rocks Chemical sedimentary rocks are formed when dissolved minerals are precipitated out of water. Examples of chemical rocks are limestone and gypsum.

Organic sedimentary rocks Organic sedimentary rocks are made up of the remains of once-living plants and animals. Examples of organic rocks are coal and chalk.

Sedimentary rocks are typically formed in layers, known as strata, and often contain fossils of ancient plants and animals.

Therefore the correct option is option G.

For such more question on sedimentary rock:

https://brainly.com/question/30765754

#SPJ11

Most tree-ring sites are located in the middle and high latitudes and not in the tropics because of several reasons.

They are as follows:

Climate conditions: It is known that tree rings reveal climatic information, such as the temperature and precipitation of an area. This is because trees produce annual growth rings, which indicate changes in climate from year to year. Trees in the middle and high latitudes experience extreme temperature changes between summer and winter, making it easier to read the tree-ring patterns compared to those in the tropics.

Soil conditions: The soil in the tropics is nutrient-rich, which helps trees grow faster and produce wider rings. It is more challenging to extract the climate information from wider rings, as the rings become less distinct and less sensitive to climate changes.

Agricultural activities: In tropical areas, there is often extensive farming, deforestation, and other human activities. This can destroy the old trees or make it challenging to find trees that have lived long enough to create a reliable tree-ring record. On the other hand, there is less farming and human activity in the middle and high latitudes, allowing for more trees to grow to old ages and creating a better tree-ring record.

Learn more about tree ring at

https://brainly.com/question/28209776

#SPJ11

Geological time is an important concept for both geologists and the public, as it allows us to comprehend and explain the age of the Earth and its evolution over time. It allows us to explain Earth processes and how they impact human life.

For geologists, geological time is essential for interpreting the evolution of the Earth, its climate and its environments. By understanding geological time, geologists can create theories about how the Earth formed and developed over time.

This helps them to better predict and explain natural phenomena, like earthquakes, volcanoes and floods.

For the public, understanding geological time is critical to understanding the effects of climate change, and how changes to the Earth’s environment can affect the human population.

By understanding how the Earth and its environment have evolved over time, the public can better understand the impacts of climate change and take appropriate action to protect their environment.

Finally, an understanding of geological time is also important for understanding the diversity of life on Earth. By understanding how life has evolved and adapted over time, we can better appreciate the amazing variety of life on our planet.

In conclusion, an understanding of geological time is critical for both geologists and the public. It allows us to understand and appreciate the history of the Earth and its environment, as well as the impacts of climate change and the diversity of life on Earth.

To know more about geological time here

https://brainly.com/question/22502144

#SPJ11

Answer:

Explanation:

The California Peninsula is a narrow strip of land separated from the Mexican territory by the Gulf of California or Sea of Cortez, and the Colorado River. Its area covers 143,600 square kilometers which holds two of the Mexican states: Baja California and Baja California South.

Crystalline rocks contain crystals that have been cemented together. These crystals are usually interlocking, meaning they fit together tightly. To determine if a rock is crystalline, you can look for certain characteristics.

The first characteristic of a crystalline rock is that it contains all one type of crystal. This crystal type can be identified by its shape and color. Crystals often appear in regular patterns, giving a crystalline rock a distinct, geometric look.

The second characteristic of a crystalline rock is that it is relatively hard. Crystalline rocks are usually harder than non-crystalline rocks. To test the hardness of a rock, you can use a simple scratch test. If the rock is crystalline, it will scratch metal or glass but not be scratched by them.

The third characteristic of a crystalline rock is that it does not contain any voids or gaps. Crystalline rocks are usually solid and the crystals are very tightly packed together. This creates a solid mass with no voids or gaps.

Finally, crystalline rocks often have a shiny or glassy appearance. This is due to the light reflecting off of the crystals. The shiny surface also reflects light and appears to have a glossy sheen.

To determine if a rock is crystalline, look for these characteristics. It should contain all one type of crystal, be relatively hard, have no gaps or voids, and have a glossy or shiny appearance. If these characteristics are present, the rock is likely crystalline.

To know more about crystalline rocks here

https://brainly.com/question/30750058

#SPJ11

Answer:

Explanation:

Answer:

Russia's involvement in World War II and the Cold War differed significantly in terms of their reasons for participation, the types of weapons used, and the outcome of each conflict. In World War II, Russia joined the Allied forces in their fight against Nazi Germany after Germany broke a non-aggression pact between the two countries and invaded Russia. Russia's involvement in the war was crucial, as they were able to push back German forces and ultimately help secure victory for the Allies. The weapons used during World War II were mainly conventional weapons, such as rifles, tanks, and planes.

On the other hand, the Cold War was a conflict between the United States and the Soviet Union (which included Russia) that lasted from 1947 to 1991. The conflict was largely ideological, with the two superpowers fighting for global dominance in a non-violent manner. The weapons used during the Cold War were mainly nuclear weapons, which were used as a deterrent against one another. The outcome of the Cold War was a victory for the United States, as the Soviet Union collapsed and the United States emerged as the sole superpower.

In conclusion, while both World War II and the Cold War involved Russia, they were vastly different in terms of their reasons for participation, the types of weapons used, and the outcome of each conflict. World War II was a conventional war fought against Nazi Germany, while the Cold War was a non-violent ideological conflict between the United States and the Soviet Union. The weapons used in World War II were mainly conventional, while the Cold War involved the threat of nuclear weapons. Ultimately, the Allies emerged victorious in World War II, while the United States emerged as the sole superpower after the collapse of the Soviet Union in the Cold War.

In North America, the most likely product to be supplied by a transnational corporation among the frequently consumed items is coffee.

The correct answer is C.

Transnational corporations are businesses that have headquarters in one country and subsidiaries in multiple other countries. These corporations are big enough to affect local economies, politics, and people’s lives in a significant way

North America is one of the largest coffee-consuming regions globally, and it's produced in countries such as Brazil, Colombia, and Costa Rica. The vast majority of coffee traded internationally is produced by small farmers and then sold to intermediaries for processing and roasting.

The commodity chain of coffee is increasingly being dominated by TNCs (Transnational Corporations) such as Starbucks, Nestlé, and Jacobs Douwe Egberts, among others. These corporations buy large amounts of coffee beans to process, package, and distribute to retail outlets globally. Therefore, the most likely product to be supplied by a transnational corporation among the frequently consumed items in North America is coffee.

Learn more about transnational corporations at https://brainly.com/question/29798384

#SPJ11

The factors that describe the metamorphic conditions at a mid-ocean ridge are hot, watery fluids.

Mid-ocean ridges are linear underwater mountain chains that run along tectonic plate boundaries. They are found where two tectonic plates diverge or move away from each other.

Mid-ocean ridges account for about 20% of the Earth's surface area. They also have a major role in oceanic crust formation.

Metamorphic conditions at a mid-ocean Ridge

The following are the factors that describe the metamorphic conditions at a mid-ocean ridge:

Hot, watery fluids - Hot water with minerals like sodium and calcium is released through hydrothermal vents on mid-ocean ridges. This process is called hydrothermal metamorphism. These fluids react with the minerals in the surrounding rock, resulting in the formation of new minerals and rock textures.

Low pressure - Hydrothermal vents on mid-ocean ridges are under very low pressure due to the high pressure of the surrounding ocean water. The low pressure allows minerals and hot water to circulate freely, resulting in the formation of new minerals and rock textures.

Low temperature - Hydrothermal fluids in mid-ocean ridges have a lower temperature than those in continental settings. However, they are still hot enough to cause metamorphism in the surrounding rock.

Your question is incomplete but most probably your full question was:

Which of the following factors describe the metamorphic conditions at a mid-ocean ridge? Select all that apply.

-low temperature

-low pressure

-hot

- watery fluids.

- dry land

- weather

Learn more about mid ocean ridges at

https://brainly.com/question/11504396

#SPJ11

The conservation of angular momentum is one of the mechanisms that can lead to a tornado's formation

Angular momentum is thought to play an important role in tornado formation because as the diameter of rotating air is reduced, the wind speeds increase as angular momentum is conserved.How is angular momentum thought to be important in the formation of a tornado?

Angular momentum is thought to be important in the formation of a tornado because as the diameter of the rotating air is decreased, the wind speeds are increased as angular momentum is conserved. This occurs when air is drawn into a thunderstorm and then forced to rotate through the vertical stretching.

The result is a rotating column of air with a very small diameter (typically only a few hundred meters).The conservation of angular momentum is a concept that states that the total amount of angular momentum in a closed system will remain constant.

This means that when the diameter of the rotating air column is decreased, the speed of the rotating air column increases in order to conserve the total angular momentum. This process is important in the formation of a tornado because it results in very high wind speeds that can cause significant damage.

The development of a tornado can be initiated by a combination of several factors such as atmospheric instability, wind shear, and moisture content. The conservation of angular momentum is one of the mechanisms that can lead to a tornado's formation.

TO KNOW ABOUT Angular momentum:

https://brainly.com/question/29897173

#SPJ11

The fog that develops when warm, moist air blows over a cold current (such as the California Current) is an example of advection fog. Advection fog occurs when warm, moist air blows over a cooler surface, resulting in cooling of the air and condensation of the moisture, forming fog.

When the warm air blows over the cold current, it is cooled and its capacity to hold moisture decreases. This causes some of the moisture to condense, forming droplets of water, or fog. As the warm air is cooled and continues to move, it brings more moisture, leading to an increase in fog.

Advection fog is common in coastal areas, especially during the summer months when the cold ocean current is juxtaposed with the warm landmass. It is also common in the Rocky Mountains when warm air from the Pacific moves over the cold Rocky Mountains.

Advection fog is often seen as a low, stratus cloud that can range from thin to quite dense. It can form over a wide area and may linger for several days. It can reduce visibility to a few hundred feet and can cause dangerous driving conditions due to the low visibility.

Advection fog is a very common type of fog and can be seen in many places around the world. It is an important factor to consider when planning activities in coastal areas or near mountains.

To know more about advection fog here

https://brainly.com/question/30700027

#SPJ11

The early atmosphere on Earth was mostly carbon dioxide.

So, the correct answer is A.

An atmosphere is the blanket of gas that surrounds a planet or other celestial object. Earth's atmosphere, which is mainly composed of nitrogen and oxygen, contains small amounts of other gases. The atmosphere can be broken down into several different layers. Troposphere, stratosphere, mesosphere, thermosphere, and exosphere are the five layers of the Earth's atmosphere. The early atmosphere of Earth was mostly carbon dioxide.

The atmosphere of the Earth comprises a variety of gases, including oxygen, nitrogen, argon, and carbon dioxide. These gases are unevenly distributed in the atmosphere due to the Earth's rotation, atmospheric pressure, and other factors. The majority of the Earth's atmosphere is composed of nitrogen (about 78 percent) and oxygen (about 21 percent). Other gases make up the remaining 1% of the atmosphere, with trace amounts of other elements and compounds contributing to the air we breathe.

Learn more about the atmosphere at https://brainly.com/question/24925283

#SPJ11

Answer:

Convection in the mantle.

Explanation:

The driving force behind plate tectonics is convection in the mantle. Hot material near the Earth's core rises, and colder mantle rock sinks. Heat and gravity are fundamental to the process.

Slash and burn agriculture is a type of low-input polyculture agriculture.

Slash-and-burn agriculture, also known as fire-fallow cultivation, is a farming method used to cultivate and maintain forests or clearings in tropical areas. Farmers slash the vegetation and burn it, releasing its nutrients into the soil, which is then tilled and planted for several seasons. After that, the plot is left to regrow to its original state, allowing the forest to return to its original state, which is usually two to three decades.

Polyculture agriculture refers to a farming method in which various crops are cultivated in the same area. It has several advantages over monoculture agriculture, including improved yields, reduced use of pesticides and fertilizers, better soil quality, and pest and disease control.

Polyculture involves cultivating various crops together in the same field, allowing the crops to interact with one another, and controlling pests and diseases more effectively. Different crops might have different root systems, allowing them to take up different nutrients from the soil. This ensures that the soil remains nutrient-rich and provides natural pest and disease control by growing different crops together.

Learn more about Polyculture agriculture at https://brainly.com/question/29427176

#SPJ11

Some of the things that affect the patterns of prevailing winds include:

Differences in atmospheric pressure between two areas can create a pressure gradient force, which causes air to move from high pressure to low pressure. This movement of air can lead to the development of prevailing winds.

The Coriolis effect is caused by the rotation of the Earth and causes winds to deflect to the right in the Northern Hemisphere and to the left in the Southern Hemisphere. This effect plays a key role in shaping the patterns of global wind systems.

Find out more on the Coriolis effect at https://brainly.com/question/1757337

#SPJ1

Answer: Cylinder

Explanation:

Think of a cylinder. It has 2 parallel circular bases and a curved surface.

None of those are considered lateral. Therefore, your answer is a cylinder.

Airflow in a Northern Hemisphere high-pressure zone is downward, outward and clockwise. option A is the right answer.

A high-pressure system is a weather condition characterized by stable, dry, and clear weather, according to meteorologists.

High-pressure systems occur when air masses having greater density than the air masses surrounding them ascend from the earth's surface and diverge in the upper atmosphere.

As the air cools, it decreases in temperature and becomes more dense, resulting in a high-pressure system.

Air moves in a clockwise manner in the Northern Hemisphere in a high-pressure system. In the Northern Hemisphere, a high-pressure system is created when air converges towards the surface of the earth.

As a result, air descends to the surface of the earth, causing increased atmospheric pressure. Thus, option A is the right answer.

TO KNOW ABOUT  Northern Hemisphere :

https://brainly.com/question/26841745#

#SPJ11

The gases that accumulate in the atmosphere and contribute to global warming are known as greenhouse gases. They trap heat from the sun and cause the Earth's temperature to increase.

Global warming refers to the phenomenon of Earth's average surface temperature increasing due to human activities that increase the concentration of greenhouse gases in the atmosphere. Greenhouse gases such as carbon dioxide, methane, and water vapor trap heat in the Earth's atmosphere, causing global temperatures to rise. This is referred to as the greenhouse effect.

The greenhouse effect is a natural process that occurs when certain gases in the Earth's atmosphere, referred to as greenhouse gases, trap heat from the sun, preventing it from escaping into space. As a result, the Earth's temperature is kept within a range that is conducive to life as we know it.

However, human activities such as burning fossil fuels, deforestation, and industrial processes have led to an increase in the concentration of greenhouse gases in the atmosphere, intensifying the greenhouse effect and causing global warming. This is a significant concern, as global warming can have a range of negative impacts on the environment and human societies.

Learn more about global warming at

https://brainly.com/question/12908180

#SPJ11

Answer:

Large metallic objects that are clustered in bands are called "asteroid belts".

  this example illustrates one of the most fundamental and useful principles for relative age-dating of rocks. describe and invent a name for the general principle useful in relative age-dating that is represented here                                                                                                                                                                      

Convergent plate boundary are the plate boundaries which occur when two plates collide into each other. The denser plates move underneath the lighter plate by forming a subduction zone.

Convergent Plate Boundary occur when two plates collide into each other. The denser plate moves underneath the lighter one, forming a subduction zone. The force behind the boundary is the motion of plates. When the continental and oceanic crust come together, the oceanic plate sinks under the continental plate because the oceanic plate is denser. The oceanic plate is destroyed at the subduction zone, which is where the Andesite volcano forms.

When it comes to the mechanics of a convergent plate boundary that produces Andesite volcanoes, the two plates that collide into each other are oceanic and continental crust. The oceanic plate is denser than the continental plate, and it moves underneath the lighter one. Andesite volcanoes form as a result of the collision. The subduction zone is where the oceanic plate is destroyed, and the Andesite volcano forms.

Andesite is formed by the fusion of basaltic rock from the oceanic plate and granite from the continental plate. The two rocks mix together to form Andesite, which erupts as a volcano when it comes into contact with the atmosphere. The different rock types involved in the process are granite and basalt. The subduction zone and trench are two of the features of the convergent plate boundary that produces Andesite volcanoes. The convergent plate boundary is a geological feature that occurs when two tectonic plates collide into each other. The denser plate moves underneath the lighter one, forming a subduction zone. The force behind the boundary is the motion of plates. Andesite volcanoes form at the subduction zone when oceanic and continental crust collide.

Learn more about Convergent Plate Boundary here:

https://brainly.com/question/23845744

#SPJ11

Answer:

There is no type of stress that is not seen in rocks among the options given. All four types of stress listed are commonly observed in rocks: shear stress, transitional stress, compressional stress, and tensional stress.

Shear stress occurs when rocks are subjected to forces that cause them to slide or twist along parallel planes, resulting in shearing or tearing of the rock.

Transitional stress occurs when rocks are subjected to forces that cause them to change shape or deform without breaking or cracking, such as bending or folding.

Compressional stress occurs when rocks are subjected to forces that push them together or cause them to be squeezed or shortened, resulting in deformation or folding.

Tensional stress occurs when rocks are subjected to forces that pull them apart or stretch them, resulting in the development of cracks or fractures.

Explanation:

Answer:

Stress during the transition period. This is NOT a sort of stress found in rocks.

Transitional stress is a sort of social stress that signifies mental tension that occurs as a result of life transitions and derives from one's connections with others and from society. Geological stresses are applied to rocks.

Explanation:

brainliest pls

The result of Earth's rotation on the weather patterns and ocean currents. The Coriolis effect makes storms swirl clockwise in the southern hemisphere and counter-clockwise in the Northern hemisphere.

The Aleutian and Hawaiian Islands form from two different processes related to Plate Tectonics. The Aleutian Islands are formed by the subduction of the Pacific plate beneath the North American plate at the Aleutian Trench. This process is also known as a convergent plate boundary.

During subduction, the oceanic lithosphere is consumed and in the process magma is produced and rises to the surface. This magma then cools and hardens to form the Aleutian Islands.

The Hawaiian Islands are formed by a process known as hotspot volcanism. Hotspots are stationary mantle plumes that rise from the mantle and melt the lithosphere.

This process is also known as a divergent plate boundary. The Hawaiian hotspot is located beneath the Pacific plate and has created the Hawaiian Ridge of islands, as the Pacific plate has moved over it.

The molten material erupts to the surface to create new volcanoes and as the older volcanoes move away from the hotspot, they become inactive and form islands.

Both processes create volcanic islands, but the way in which the volcanoes form differs between the Aleutian and Hawaiian Islands. The Aleutian Islands are formed through subduction while the Hawaiian Islands are formed through hotspot volcanism.

To know more about Plate Tectonic theory here

https://brainly.com/question/29774532

#SPJ11

According to the map, most industrialization in Europe occurred in the northwest. The production of textiles was profitable throughout Western Europe.

The building of railroads helped transport goods throughout Europe. According to the map, the population trend indicates that more people are moving into urban areas.

To summarize:

- Most industrialization in Europe occurred in the northwest.
- The production of textiles was profitable throughout Western Europe.
- The building of railroads helped transport goods throughout Europe.
- The population trend indicates that more people are moving into urban areas.

TO KNOW ABOUT Western Europe:

https://brainly.com/question/14098972#

#SPJ11