Molecular compounds are termed by using the stem of the first element's name plus the suffix -ide, followed by the second element. Numerical prefixes are used to specify the number of atoms in a molecule.
What does "chemical common name" mean?The IUPAC defines a common name as one that clearly identifies a chemical but does not adhere to the current systematic naming convention. Acetone, which bears the scientific term, serves as an illustration of a common name. 2-propanone
What is the short answer to chemical?A chemical is any substance whose composition is known. A chemical always consists of the same "substance," to put it another way. Water is one of the substances found in nature.
To know more about Molecular compounds visit:-
https://brainly.com/question/20920787
#SPJ1
this is the chemical formula for talc (the main ingredient in talcum powder): an analytical chemist has determined by measurements that there are moles of magnesium in a sample of talc. how many moles of oxygen are in the sample? be sure your answer has the correct number of significant digits.
Mg3 (Si,03),(OH), is the chemical formula for talc: an analytical chemist has determined by measurements that there are 90.4 moles of magnesium and 2.43 moles of oxygen in a sample of talc.
Talcum powder is formed from talc. Talc is a mineral created up primarily of metallic element, silicon, and oxygen. As a powder, it absorbs wet well and helps weigh down on friction, creating it helpful for keeping skin dry and serving to forestall rashes.This mineral is employed as a thickening agent and stuff. It's an ingredient in ceramics, paints, and building material.
Talc is a hydrous magnesium sheet salt with the statement Mg3Si4O10(OH)2. The elementary sheet consists of a layer of magnesium-oxygen/hydroxyl octahedra, sandwiched between 2 layers of siliconoxygen tetrahedra.
To learn more about Talc here
brainly.com/question/24082743
#SPJ4
✔ Question 1
Below is a picture of the rock strata of a mountain.
What can you infer about the layers in this picture?
Sedimentary rock layers are referred to as rock strata.
What is a rock?A rock is a dense mass of mineral grains that have grown or been cemented together over time. There are big rocks and little rocks. Pebbles are little rocks.
The sediment grains that are deposited by water, wind, or ice become sedimentary rocks. They are always formed in layers and are referred to as "beds" or "strata," and frequently include fossils.
Weathering, erosion, deposition, compaction, and cementation are the processes that result in the formation of these horizontal layers. Newer layers are deposited and created during this process on top of older layers, allowing for the relative dating of each layer.
Learn more about rocks on:
https://brainly.com/question/25846908
#SPJ1
Victor put a match on a balance and found that its mass was 6.0 grams. Then he lit the match and put it out after a few seconds.
He put the partially burned match on the balance again. This time, its mass was 4.5 grams.
Which of the following best explains what happened as the match burned?
A.
Some of the matter changed from solid to gas and went into the air.
B.
The matter moved to a different part of the match.
C.
Some of the mass was destroyed by the fire.
D.
The mass of the match combined with the mass of the fire.
Place the cursor at the start of the text, then press CTRL+SHIFT+DOWN ARROW. Press CTRL+SHIFT+UP ARROW after advancing the cursor to the end of the paragraph. The Correct option is B.
How do you move the first sentence to the end of the paragraph in Word?The Ctrl+A keyboard shortcut in Word allows you to select all text in a document, and you can also use the mouse or keyboard to pick out individual words or objects from tables. Text or objects that are located in various locations can also be chosen. You can choose, for instance, a sentence from one page and a paragraph from another.The entire textIn the document, click anywhere.You can pick every word in the document by pressing Ctrl+A on your computer.The particular wording you wantAdditionally, you have the option of choosing a specific word, line of text, or one or more paragraphs.Your cursor should be placed in front of the first letter of the word, sentence, or paragraph you want to pick.To pick a text block, click and hold while dragging the cursor over it.Other options for selecting textQuickly click and drag the mouse over a word to choose it.By positioning your cursor at the beginning of a line of text and pressing Shift + down arrow, you can pick that line of text.Put your cursor at the beginning of the paragraph, then hit the down arrow while holding down the Ctrl and Shift keys to select the paragraph.To Learn more About end of the paragraph refer to:
https://brainly.com/question/25717629
#SPJ1
How many moles exist in 3,000,000 particles of gold (Au)?
Answer:
4.98 x 10^-18 mole
Explanation:
1 mole has 6.022 x 10^23 particles
so 3,000,000/(6.022 x 10^23) = 4.98 x 10^-18 mole
What makes a field forever unique?
From cotton fields to corn stalks, if this is what you mean, a forever field is unique in its own way by keeping all types of plants in the field. They are all different in how they grow and what they do.
which metal would you expect to have the highest melting point? which metal would you expect to have the highest melting point? agag tctc rbrb
Among the elements in the periodic table, tungsten metal is expected to have the highest melting point.
Tungsten, having atomic number 74 belongs to the 6th group and 6th period of the periodic table.
It is the metal with the highest melting point i.e 3422°C . For this reason, tungsten is used as a metallic component in the filaments of electric bulbs and in cathode ray tubes.
Tungsten is considered a refractory metal due to its heat-hesistance nature. on the other hand, alkali metals such as Li,Na,K have low melting points because of their large size of atoms and due to which the binding energies of the atoms in the crystal lattice is comparatively low, resulting in low melting point.
To know more about highest melting point of metals here
https://brainly.com/question/11332577
#SPJ4
which set of elements is arranged in order of increasing electronegativity? which set of elements is arranged in order of increasing electronegativity? ga < ge < p < n p < n < ge < ga ge < n < ga < p n < p < ge < ga
The electronegativity is n < p < ge < ga.
What is electronegativity?Electronegativity is a measure of an atom's ability to attract electrons when it forms a chemical bond with another atom. It is based on the Pauling Scale, which assigns values to elements based on their tendency to attract electrons when they form bonds. Electronegativity increases from left to right across the periodic table, and increases from the bottom to the top of the periodic table.
The correct answer is n < p < ge < ga. This is because electronegativity increases as we move down a group in the periodic table and from left to right across a period.
Therefore, the element with the highest electronegativity is at the bottom right corner of the periodic table, which is gaseous, followed by Germanium, Phosphorus, and then Nitrogen.
To learn more about electronegativity
https://brainly.com/question/2415812
#SPJ4
A science class is going to do an experiment to investigate how water temperature changes the rate at which salt dissolves in water. What tool will be needed to measure the temperature of the water?
Answer:
thermometers
Explanation:
Answer: thermometer
Explanation: trust me ;)
please help!
Are magnesium and calcium more reactive with oxygen in the air than is aluminum? Support your answer.
Magnesium and calcium are 2nd group elements with 2 valence electrons. They are metals in room temperature and easily lose these electrons to nonmetals such as oxygen.
What is magnesium ?Magnesium is 12th element in periodic table. It is 2nd group element and is a called alkaline earth metals. Its group members are calcium, strontium, and barium.
They contains 2 valence electrons which can be easily lost to a non-metal. Oxygen is highly electronegative element and it contains 6 valence electrons and need two more electrons to achieve octet.
Al is 13th group element it is not as much electropositive as alkaline earth metals. It contains 3 valence electrons and thus it need to lose all these 3 electrons to achieve octet. Hence, Al is less reactive towards O2 in comparison with Mg and Ca.
To find more on metal oxides, refer here:
https://brainly.com/question/22966565
#SPJ1
what special equipment did niels bohr use to develop his atomic model?
Neil Bohr used the fluorescent screen and an alpha particle detector to study the structure of an atom.
What is an atom?
An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
The atom as a whole is neutral and stable due to presence of oppositely charged particles.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ1
how are components separated using distillation? the substance with the [ select ] vapor pressure is vaporized first, and then it is
The material with the lower boiling point vaporizes first when heated, then condenses and collects.
The heat that is generated during the condensation process of higher boiling vapor is what leads to the process of vaporization. Because it has such a huge surface area, the packing enables vapors to move freely between the ascending and descending directions. In the process of evaporation, the vaporization happens at a temperature lower than the boiling point, whereas in the distillation process, the vaporization happens at the boiling point.
To know more about boiling point click on the link below:
https://brainly.com/question/40140
#SPJ4
Which of the following is an example of a heterogeneous mixture?
salad
milk
paint
toothpaste
Answer:
salad
Explanation:
before glass electrodes and ph meters became widely used, ph was often determined by measuring the concentration of the acid and base forms of the indicator colorimetrically. if bromothymol blue is introduced into a solution and the concentration ratio of acid to base form is found to be 1.36, what is the ph of the solution? ph
In this theory, acidity is defined by the concentration of hydrogen ions: the greater the concentration, the more acidic a solution. The measure used is the pH—potential of hydrogen—scale, developed in 1909. The pH scale has values ranging from 0 (extremely acidic) to 14 (extremely alkaline).
To trace the pH scale, a group of standard solutions whose pH has been established by international agreement can be employed. The potential difference between a hydrogen electrode and a standard electrode, such as the silver chloride electrode, is measured using a concentration cell with transference to obtain the primary pH standard values. The pH of aqueous solutions can be measured using a glass electrode, a pH metre, or a color-changing indicator. pH measurements are important in many fields, including chemistry, agronomy, medicine, water treatment, and many more.
To learn more about pH click on the given link: https://brainly.com/question/491373
#SPJ4
Which characteristic does inertia describe? responses how long an object is how long an object is how large an object is how large an object is how fast an object is moving how fast an object is moving how difficult it is to change an object's motion
Option C, Inertia describes how difficult it is to change the motion of an object.
What is meant by Inertia?The Latin term inerus, which meaning inert or slow, is where the word inertia originates. It may also refer to an object's resistance to a change in velocity.An object is said to have inertia if no external force forces it to change its speed or direction from its current state. Newton's first law of motion included a description of the concept of inertia. It is a propensity to do nothing or to do nothing different.Unless acted upon by an unbalanced force, an object remains at rest and an object in motion will remain to move at a constant speed and in a straight line. This is known as Newton's first law of motion (inertia).Learn more about Inertia refer to :
https://brainly.com/question/1140505
#SPJ4
ANSWER ASAP FOR 90 POINTS Question: Air pressure is...
A.high and low at the bottom
B. same at the top same at the bottom
C.low at the top low at the bottom
D.low at the top hight at the bottom
Air pressure is D.low at the top hight at the bottom.
How much air pressure is typical?Pressure is the force that the air applies to the ground when gravity acts on it. At sea level, there is typically a pressure of 1013.25 millibars, or 14.7 pounds per square inch.
When the air pressure is high, what happens?High pressure frequently heralds sunny, dry weather. Clouds and precipitation are frequently indicative of low pressure. Air that is sinking is related with high pressure. Because it is pushing DOWN on the ground, air pressure is higher.
How do we react to air pressure?High barometric pressure exerts additional pressure against our bodies, which restricts how much tissue can expand. On the other hand, when air pressure is low, our body's tissues can expand more, which results in more pressure.
Learn more about air pressure here:
brainly.com/question/7381033
#SPJ1
How many elements belong to the Halogen family? List the member elements by their symbol?
Answer:
5
Explanation:
fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At).
a housewife used the aluminum can to keep vinegar. After sometime, it is found that the vinegar is spoiled. Give a reason.
Answer:
Explanation:She was wrong
How many moles of chlorine are present in 3 moles of MgCl2
The amount, in moles, of chlorine that would be present in 3 moles of [tex]MgCl_2[/tex] would be 6 moles.
Stoichiometric problem[tex]MgCl_2[/tex] is made from magnesium and chlorine molecules according to the following equation:
[tex]MgCl_2 --- > Mg^{2+} + 2Cl^-[/tex]
From the above equation, 1 mole of [tex]MgCl_2[/tex] is made up of 1 mole of Mg and 2 moles of Cl.
Following this established ratio, the amount of chlorine that would be present in 3 moles of [tex]MgCl_2[/tex] can be calculated as follows:
1 mole [tex]MgCl_2[/tex] = 2 moles of Cl
3 moles [tex]MgCl_2[/tex] = 2 x 3/1
= 6 moles of Cl
In other words, 6 moles of Cl would be present in 3 moles of [tex]MgCl_2[/tex].
More on stoichiometric calculations can be found here: https://brainly.com/question/27287858
#SPJ1
what quantity is needed to convert between the moles of a given sample of a substance and its mass in grams
The molar mass of the substance is needed to convert between the moles of a given sample of a substance and its mass in grams.
What is molar mass?A compound's molar mass, which is measured in grams per mole, specifies how much of a given material weighs in one mole. In other terms, the molar mass is the sum of the masses of all the atoms that make up a mole of a certain molecule, expressed in grams. As a result, the molar mass is measured in grams/mole.
The compound's molar mass is expressed in grams per mole, or g/mol. The mass of 1 mol, expressed in the SI as g/mol, is the definition of the molar mass. Example: Water has a molar mass of 18.016 g/mol.
Thus, The molar mass of the substance is needed to convert between the moles of a given sample of a substance and its mass in grams.
To know more about molar mass refer to:
https://brainly.com/question/837939
#SPJ1
The complete question is as follows:
What quantity is needed to convert between the moles of a given sample of a substance and its mass in grams?
a the molar mass of the substance
b the density of the substance
с the physical state of the substance
d all of the above
Khloe is preheating her oven before using it to bake. Khloe wants to predict the final temperature after xx minutes. She wrote the equation y=20x+78y=20x+78, where yy represents the final temperature in degrees fahrenheit. What is the meaning of the yy-value when x=1x=1?.
The final temperature of the oven after being preheated, y is 98 degrees Fahrenheit.
What is the relationship between the final temperature and the time taken to preheat the oven?The relationship between the final temperature, y, and the time taken to preheat the oven, x is given by the equation below:
y = 20x + 78
where;
the final temperature is y,
and the time taken to preheat the oven is x
When x is equal to 1, the value of y can be determined as follows:
y = 20 (1) + 78
y = 98 degrees Fahrenheit.
Learn more about the temperature in degrees Fahrenheit at: https://brainly.com/question/27747237
#SPJ1
write a paragraph using the words atom, element, compound, and mixture.
