DNA is a nucleic acid made of building blocks called nucleotides.
Which of the following options make up nucleotides?

Answer:

The limiting reactant is the propane gas, C₃H₈ while the percentage yield is 83.77%

Explanation:

Here we have

Propane gas with molecular formula C₃H₈, molar mass  = 44.1 g/mol combining with O₂ as follows

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

Therefore, 1 mole of C₃H₈  combines with 5 moles of O₂ to produce 3 moles CO₂ and 4 moles of H₂O

Mass of propane = 0.1240 kg = 124.0 g

Number of moles of propane = mass of propane/(molar mass of propane)

The number of moles of propane = 124/44.1 = 2.812 moles

The molar mass of CO₂ = 44.01 g/mol

Mass of CO₂ = 0.3110 kg = 311.0 g

Therefore, number of moles of CO₂ = mass of CO₂/(molar mass of CO₂)

The number of moles of CO₂ = 311.0 kg/ 44.01 g/mol = 7.067 moles

Therefore, since 1 mole of propane produces 3 moles of CO₂, 2.812 moles of propane will produce 3 × 2.812 moles or 8.44 moles of CO₂

Therefore;

The limiting reactant is the propane gas, C₃H₈, since the oxygen is in excess

Hence

[tex]The \ percentage \ yield = \frac{Actual \, yield}{Theoretical \, yield} \times 100 = \frac{7.067}{8.44} \times 100 = 83.77 \%[/tex]

The percentage yield = 83.77%.

Answer:t

Explanation:bc

Answer

False

Explanation:

According to the law of conservation of mass, there is no net change in the reactants' and products' masses before and after a chemical reaction.

Chemical reaction is defined as a procedure where one or more compounds, known as reactants, are changed into one or more new substances, known as products. When atoms establish or break chemical bonds, chemical reaction take place.

Law of conservation of mass is defined as a chemical reaction requires that the total mass of the reactants and products be equal. Law of conservation of mass also stated that mass is always conserved throughout chemical reactions and cannot be created or removed.

Thus, according to the law of conservation of mass, there is no net change in the reactants' and products' masses before and after a chemical reaction.

To learn more about law of conservation of mass, refer to the link below:

https://brainly.com/question/28711001

#SPJ6

Water boils at 100 Degrees Celsius or 212 degrees Fahrenheit

Answer:

H+

Explanation:

Answer:

OH-

Explanation:

An Arrhenius base is any species that increases the concentration of

OH

Answer : A

0,15 moles of NaOH -------in-------1000ml

x moles of NaOH ---------in-------100ml

x= 0,015 moles of NaOH

final volume =150ml

0,015 moles of NaOH -------in------150ml

x moles of NaOH ------in--------1000ml

x= 0,1 moles of NaOH

Answer:

38g of Cr

Explanation:

Step 1:

The balanced equation for the reaction:

2K + CrBr2 —> 2KBr + Cr

Step 2:

Determination of the masses of K and CrBr2 that reacted and the mass of Cr produced from the balanced equation.

This is illustrated below:

Molar mass of K = 39g/mol

Mass of K from the balanced equation = 2 x 39 = 78g

Molar Mass of CrBr2 = 52 + (80x2) = 212g

Mass of CrBr2 from the balanced equation = 1 x 212 = 212g

Molar Mass of Cr = 52g/mol

Mass of Cr from the balanced equation = 1 x 52 = 52g

From the balanced equation above,

78g of K reacted with 212g of CrBr2 to produce 52g of Cr.

Step 3:

Determination of the limiting reactant.

This is illustrated below:

From the balanced equation above,

78g of K reacted with 212g of CrBr2.

Therefore, 57g of K will react with = (57 x 212)/78 = 154.92g of CrBr2.

From the above calculation, we can see that a lesser mass (i.e 154.92g) than what was given ( i.e 199g) of CrBr2 is needed to react completely with 57g of K. Therefore, K is the limiting reactant and CrBr2 is the excess reactant.

Step 4:

Determination of the mass of Cr produced by the reaction.

In this case, the limiting reactant will be use because it will give the maximum yield of Cr as all of it is used up in the reaction process. The limiting reactant is K and the mass of Cr produced is obtained as follow:

From the balanced equation above,

78g of K reacted to produce 52g of Cr.

Therefore, 57g of K will produce = (57 x 52)/78 = 38g of Cr.

Therefore, 38g of Cr is produced from the reaction.

Answer:

I am not so sure but I think it is A.

Explanation:

If i got it wrong sorry....   :(

Answer:

the answer is A hope it helps

Answer:

[tex]T1=166.66K[/tex]

Explanation:

According to Gay-Lussac’s law simply states that the ratio of the initial pressure and temperature is equal to the ratio of the final pressure and temperature for a gas of a fixed provided that the mass is kept at a constant volume.

Given:

Initial pressure, P1 = 1 atm

Final pressure, P2 = 1.5 atm

Final temperature, T2 = 250 K

The law can be applied using the below formula

P1T2 = P2T1

Then,

T1 = (P1T2)/P1 = (1*250)/(1.5) = 166.66 Kelvin.

[tex]T1=166.66K[/tex]

:

Answer:

[tex]T_1=166.7K[/tex]

Explanation:

Hello,

In this case, by applying the Gay-Lussac's law which help us to understand the pressure-temperature gas behavior via a directly proportional relationship:

[tex]\frac{P_1}{T_1} =\frac{P_2}{T_2}[/tex]

In such a way, as we are asked to compute the initial temperature knowing the initial pressure and final both temperature and pressure, so we solve for it:

[tex]T_1=\frac{T_2P_1}{P_2}=\frac{250K*1atm}{1.5atm} \\\\T_1=166.7K[/tex]

Best regards.

Answer:

CuFeS2

Explanation:

Calculate the moles of each substance by doing moles= mass/relative atomic mass. you should get 0.25 moles of copper and iron and 0.5 moles of sulfur. Then divide all of those numbers by 0.25 (as its the lowest value) you should get 1 for copper and iron and 2 for sulfur. This represents the ratio that they are in within the mineral.

Answer:

[H⁺] = 1.0 x 10⁻¹² M.

Explanation:

∵ [H⁺][OH⁻] = 10⁻¹⁴.

[OH⁻] = 1 x 10⁻² mol/L.

∴ [H⁺] =  10⁻¹⁴/[OH⁻] = (10⁻¹⁴)/(1 x 10⁻² mol/L) = 1.0 x 10⁻¹² M.

∵ pH = - log[H⁺] = - log(1.0 x 10⁻¹² M) = 12.0.

∴ The solution is basic, since pH id higher than 7 and also the  [OH⁻] > [H⁺].

I think- IDK

Answer:

A metal and a nonmetal

Explanation:

Picture NaCl, the most famous example of an ionic compound. Two ions, Na+ (sodium) and Cl- (chlorine) are joined by an ionic bond.

Sodium, the metal, gives up an electron to chlorine.

Chlorine, the nonmetal, accepts an electron from sodium.

That way both have 8 electrons in their outer shell! This is the way ionic bonds function.

Answer:

A: true.

B: true.

C: false

D: true.

Explanation:

Light is an electromagnetic wave which travels regardless of whether there is medium. sound is a wave disturbance in medium meaning it must have matter. Also light is much faster then sound.

Answer:

The ISS provides a location in the relative safety of low Earth orbit to test spacecraft systems that will be required for long-duration missions to the Moon and Mars.

Explanation:

Answer:It allows us to see things so we know where we are going that’s why at night we had lamp posts

Explanation:

Answer:

I think they both need heat.

Explanation:

Answer:

C.

Explanation:

This is a reaction of elimination, because the water was removed and because of it double bond is formed.

Answer:

I believe the answer you're looking for is DNA, not sure though

Answer:

3,3-dimethyl hexane

Explanation:

                        CH3

         I     I     I     I     I    I

      - C - C - C - C - C - C-

         I     I     I     I     I    I

                        CH3

Answer:

18.0 g

Explanation:

M(H2) = 2.0 g/mol

32.0g * 1 mol/2 g= 16 mol H2

M(O2) = 32 g/mol

16.0 g * 1mol/32 g= 0.5 mol O2

                                      2H2 + O2 ---> 2H2O

from reaction              2 mol    1 mol

given                         16 mol     0.5 mol

We see that O2 is a limiting reactant.

                                    2H2 + O2 +-------> 2H2O

from reaction                         1 mol            2 mol

given                                      0.5 mol        x mol

x =(0.5*2)/1= 1 mol H2O

M(H2O)= 18 g/mol

18 g/mol* 1 mol = 18 g H2O

Answer:

0.164541341 g H2

Explanation:

1) Convert grams to moles by dividing by RMM of Magnesium (24.31g).

  2g Mg * (1 mol Mg / 24.31 g Mg) = 0.082270671 mol of Mg

2) Use the balanced equation's ratio of 1 mol Mg: 1 mol H2.

  0.082270671 mol of Mg = 0.082270671 mol of H2

3) Convert the mol of H2 back into grams by multiplying by H2's RMM (2 g).

  0.082270671 mol of H2 * 2 g H2 = 0.164541341 g H2

* Answer can be rounded to your liking *

Answer:

The molarity is 1.26 [tex]\frac{ moles}{L}[/tex]

Explanation:

Molarity is a unit of concentration that is based on the volume of a solution and represents the number of moles of solutes contained in a liter. The molarity of a solution is calculated by dividing the moles of the solute by the liters of the solution and is expressed in units (moles / liter).

[tex]Molarity=\frac{number of moles of solute}{Volume}[/tex]

You must calculate the number of moles of CuSO₄. So, being:

the molar mass of CuSO₄ is

CuSO₄=63.54 g/mole + 32 g/mole + 4* 16 g/mole= 159.54 g/mole

Then it is possible to apply the following rule of three: if 159.54 g of CuSO₄ are present in 1 mole, 10 g in how many moles are they?

[tex]moles=\frac{10 g*1 mole}{159.54 g}[/tex]

moles= 0.063 moles

Then:

Replacing in the definition of molarity:

[tex]Molarity=\frac{0.063 moles}{0.05 L}[/tex]

Molarity= 1.26 [tex]\frac{ moles}{L}[/tex]

The molarity is 1.26 [tex]\frac{ moles}{L}[/tex]

Answer:

Explanation:

For amount of radiation from a hot body there is Stefan's Boltzman's law which is given below .

E = e σ T⁴

E is amount emitted , e is emissivity , σ is stefan's constant = 5.67 X 10⁻⁸ W / m² . for earth e =.85 approx

E = .85 x 5.67 X 10⁻⁸ x T⁴

604 = .85 x 5.67 X 10⁻⁸ x T⁴

604 = 4.82 x 10⁻⁸ T⁴

T⁴ = 125.31 x 10⁸

T =  3.3457 x 10²

= 334.57K

Temperature in Celsius = 334.57 - 273

= 61.57 Celsius .

Answer:

The concentration of HA is the same as concentration of H3O+ and A- produced.

Explanation:

The dissociation equation is given below:

HA(aq) + H2O (l) —> H3O+(aq) + A-(aq)

From the reaction above, we can see that the acid is monoprotic acid i.e it has only 1 ionisable hydrogen atom.

Now, from the balanced equation, we can see that the acid produced equal concentration of H3O+ and A-.

This account for the reason why the bars for H3O+ and A- have the same height as the bar for HA.

Answer:

True.

Explanation:

Wind abrasion is a form of erosion.

Hope I helped ya.

< Sarah >

Answer:

No.

Explanation:

All the elements have the different number of protons .

Answer:

no it is not true because atoms may have the same number of neutrons but they never have the same number of protons

Explanation: