Volume difference between back titration and controlHCI neutralized by NaOH volume difference is 0.0056 moles.
Given,
* Mass of Antacid = 0.5g
* [HCl] = 1M
* [tex]V_{HCl}[/tex] = 5 ml (pipetted out)
* [NaOH] = 1M
* [tex]V_{NaOH}[/tex] - 1.2 ml (consumed)
* Amt. of HCl avaliable for neutralisation = 0.1825 g
* No. of moles of NaOH req. to reach eq. point = 0.0012
* Amt. of HCl neutralised by antalid = 0.1387 g
* Amt. of HCl neutralised by antalid = 0.1387 g
* Amt. of HCl neutralised per gram of antalid = 0.1387 g
Solution: [tex]([/tex][tex]N[/tex] × [tex]V[/tex][tex])_{HCl}[/tex] = [tex]([/tex][tex]N[/tex] × [tex]V[/tex][tex])_{NaOH}[/tex]
(1 x 5 ) = [tex]([/tex][tex]1[/tex] × [tex]V[/tex][tex])_{NaOH}[/tex]
= [tex]V(NaOH)[/tex] = ( 1 x 5) / 1 = 5ml
In control expt. data [tex]V(NaOH)[/tex] = 5.6ml
But in given data, [tex]V(NaOH)[/tex] = 1.2ml
So, Volume diff. of NaOH between back titration and control = 5.6 - 1.2 = 4.4ml
So, given follows
So, 4.4 ml of HCl means,
its Conc. will be equal to, 4.4 x 36.5 / 1000 = 0.1606 g
This is correct in control expt. results
In control expt. data, [tex]V(NaOH)[/tex] = 5.6ml
This corresponds to 5.6 x 40 / 1000 = 0.224g
This correspond to 0.224 / 40 = 0.0056 moles
This is correct in control expt. results.
Titration is a laboratory technique used to determine the concentration of an unknown solution by reacting it with a known solution. It is a quantitative method used to determine the amount of a substance in a sample. Titration is often used in chemistry to determine the concentration of acids, bases, and salts.
In a titration, a measured amount of the unknown solution is slowly added to a known solution of a substance with a known concentration called the titrant. The titrant is added until the reaction is complete, and a color change or other observable change occurs. The point at which the reaction is complete is known as the endpoint, and it is usually determined using an indicator, which changes color when the reaction is complete.
To learn more about Titration visit here:
brainly.com/question/2728613
#SPJ4
explain why the ph of 0.1 m ethanol is higher than the ph of 0.1 m acetic acid. draw structures to support your explanation.
The pH of 0.1 M ethanol is higher than the pH of 0.1 M acetic acid is because ethanol is a neutral molecule while acetic acid is a weak acid.
What are the effects of change in pH on different molecules?The pH of 0.1 M ethanol is higher than the pH of 0.1 M acetic acid because ethanol is a neutral molecule and does not donate or accept protons, while acetic acid is a weak acid that can donate a proton to water, creating hydronium ions (H₃O⁺) and decreasing the pH.
Here are the structures of ethanol and acetic acid to support this explanation:
Ethanol (CH₃CH₂OH):
H H
| |
H-C-C-OH
| |
H H
Acetic Acid (CH₃COOH):
H O
| ||
H-C-C-O-H
|
H
In acetic acid, the carboxylic acid group (-COOH) can donate a proton (H⁺) to water, which increases the concentration of hydronium ions (H₃O⁺) in the solution, leading to a lower pH:
CH₃COOH + H₂O → CH₃COO⁻ + H₃O⁺
Ethanol, on the other hand, does not have an acidic hydrogen and will not donate protons to water, so its pH remains neutral (pH around 7).
To know more about pH:
https://brainly.com/question/3649733
#SPJ11
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction then which way will the reaction proceed? a. The reaction is at equilibrium and the reaction will proceed at equal rates in the reverse and forward direction. b. The reaction will proceed to the right (products side) c. The reaction equation is required to answer this question d. The reaction will proceed to the left( reactants side)
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction, then the reaction will proceed towards the right, i.e., in the direction of the products. The correct option is (b).
This is because the forward reaction is favored over the reverse reaction as there is less number of products present, and the system tends to minimize the stress caused by an increase in the number of reactants. Here, stress refers to the difference between Q and K.
In other words, if Q < K, then the system has less number of products than it should at equilibrium. Hence, the reaction proceeds in the forward direction to increase the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
In contrast, if Q > K, then the system has more products than it should be at equilibrium. Hence, the reaction proceeds in the reverse direction to decrease the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
Therefore, option (b) is the correct answer. The reaction will proceed to the right (product side) if Q is smaller than K.
To know more about equilibrium constant, refer here:
https://brainly.com/question/15118952#
#SPJ11
how many chirality centers are there in an aldohexose?a. 3b. 4c. 5d. 6
There are 4 chirality centers in an aldohexose. The correct answer is option b.
Aldohexoses are six-carbon monosaccharides with a carbonyl functional group (aldehyde group) and five other carbon atoms, each of which is associated with an alcohol functional group in their straight-chain form. The carbonyl carbon, which is referred to as the anomeric carbon, determines the stereochemistry and the cyclic form of aldohexoses.
Chirality centers are carbon atoms that have four distinct substituents bonded to them, resulting in the ability to exist as stereoisomers. These stereoisomers are mirror images of each other and cannot be superimposed upon each other.Therefore, it is important to count the number of chirality centers present in the aldohexose structure.
There are four chirality centers in aldohexose, which are present at carbon atoms 2, 3, 4, and 5.
For more such questions on chirality centers, click on:
https://brainly.com/question/9522537
#SPJ11
Iron nail wrapped with copper wire Determine the standard reduction potential of the cathode half-reaction, the standard reduction potential of the anode half-reaction, and the standard potential of the cell. E°cathode ____
(V) E° anode ___ (V) E° cell ___ (V)
The standard reduction potential of the cathode half-reaction is -0.36V,
The standard reduction potential of the anode half-reaction is +0.34V,
and the standard potential of the cell is -0.02V.
The cathode half-reaction is the reduction of iron (Fe²⁺) to iron (Fe):
Fe²⁺ + 2e⁻ -> Fe; E°cathode = -0.36V.
The anode half-reaction is the oxidation of copper (Cu) to copper (Cu²⁺):
Cu -> Cu²⁺ + 2e⁻; E°anode = +0.34V.
The standard potential of the cell is determined by subtracting the standard reduction potential of the anode from the standard reduction potential of the cathode:
E°cell = E°cathode - E°anode
= -0.36V - (+0.34V)
= -0.02V.
Learn more about the standard potential of the cell here:
https://brainly.com/question/19036092
#SPJ11
At the resting membrane potential, the membrane is most permeable to ________, which moves ________ the cell due to its A) chloride : into B) potassium : into C) sodium : out of D) sodium : into E) potassium : out of
At the resting membrane potential, the membrane is most permeable to potassium ions (K+), which move out of the cell due to its concentration gradient and the negative charge inside the cell. Correct answer is option: E.
This movement of K+ ions out of the cell contributes to the negative resting membrane potential of approximately -70 mV in most cells. The resting membrane potential is maintained by the selective permeability of the cell membrane, which allows for the movement of certain ions across the membrane. In general, the membrane is less permeable to sodium (Na+) and chloride (Cl-) ions at rest, and the movement of these ions across the membrane is limited. Thus, option E "potassium" is the correct answer.
To know more about resting membrane, here
brainly.com/question/8438145
#SPJ4
ion channels that open and close in response to a change in membrane potential are called _____.
Ion channels that open and close in response to a change in membrane potential are called voltage-gated ion channels.
What is Voltage-gated ion channels?Voltage-gated ion channels are a specialized type of membrane protein that are embedded in the lipid bilayer of excitable cells. They have a pore that allows ions to flow through, and they can be selective for different types of ions, such as sodium (Na+), potassium (K+), or calcium (Ca2+).
The opening and closing of the channel's pore is controlled by changes in the membrane potential, which is the difference in electrical charge across the cell membrane.
These channels are crucial for the generation and propagation of electrical signals in excitable cells, such as neurons and muscle cells. Voltage-gated ion channels are capable of detecting small changes in membrane potential and responding by opening or closing their pore, allowing ions to flow across the membrane and alter the electrical state of the cell.
Learn more about ion channels here: https://brainly.com/question/12578279
#SPJ1
Whats the difference between zinc amino acid chelate with any other type of zincs?
Answer:
chelated zinc is more easily absorbed than zinc on it's own.
Use these two constants for the question that follows:
e = 1.6 × 10^−19 C
k = 8.99 × 10^9 N m^2/C^2
A positive charge and a negative charge are 10^−15 m away from each other. Using Coulomb's law, which of the following is the electrical force between these two particles?
230 N
−230 N
120 N
−120 N
Answer: -230 N
Explanation:
The electrical force between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:
F = k * (q1 * q2) / r^2
where k is the Coulomb constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.
In this case, we have a positive charge and a negative charge, which means that q1 and q2 have opposite signs. Let's assume that the positive charge has a magnitude of q and the negative charge has a magnitude of -q. Then, the electrical force between them can be calculated as:
F = k * (q * (-q)) / r^2 = -k * q^2 / r^2
Substituting the given values of e and k, we get:
F = - (8.99 × 10^9 N m^2/C^2) * (1.6 × 10^-19 C)^2 / (10^-15 m)^2 ≈ -230 N
Note that the negative sign indicates that the force is attractive, which is expected for opposite charges. Therefore, the correct answer is:
-230 N.
When a utensil is stored in water between uses, what are the requirements?A. Running water at any temperature, or a container of water at 70 F (21 C) or lower.B. Running water at any temperature, or a container of water at 135 F (57 C) or lower.C. Running water at 70 F (21 C) or lower, or a container of water at 70 F (21 C) or lower.D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.
D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.
A student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. What is the rate law of the reaction? Rate = k Rate = k[A] Rate = k[A]2 Rate = k[A]3
A student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of the reaction is b. Rate = k[A]
The given question is related to the rate law of the reaction. The student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of a reaction is a mathematical equation that relates the rate of the reaction to the concentrations of reactants and the reaction's constant of proportionality. The rate law is also called the rate equation or rate expression.
As per the given information, the plot of [A] vs t is linear, which means that the reaction is a first-order reaction. The plot of ln[A] vs t is non-linear, which means that the reaction is not zero-order or first-order. It could be a second-order or third-order reaction. The plot of 1/[A] vs t is non-linear, which means that the reaction is not a first-order reaction. It could be a second-order or third-order reaction. Therefore, the rate law of the reaction can be given as Rate = k[A]. This represents a first-order reaction. Hence, the correct option is Rate = k[A].
Learn more about rate law at:
https://brainly.com/question/14779101
#SPJ11
suppose you experimentally calculate the value of the density of co2 as 2.03 g/l. the known value is 1.98 g/l. what is the percent error of your experimentally determined density?
The percent error of your experimentally determined density is that is an error of 2.53%.
It can be calculated using the following equation: Error % = (Experimentally Determined Value - Known Value)/Known Value x 100. So in your case, the equation would look like: Error % = (2.03 g/l - 1.98 g/l)/1.98 g/l x 100
This gives us an error of 2.53%.
The given value of density of CO2 is 2.03 g/L and the actual value of density of CO2 is 1.98 g/L. The percent error can be calculated using the below formula: Percent error = (|experimental value - actual value|/actual value) × 100Therefore, the percent error of experimentally determined density is Percent error = (|2.03 g/L - 1.98 g/L|/1.98 g/L) × 100= (0.05 g/L/1.98 g/L) × 100= 2.53%Thus, the percent error of the experimentally determined density is 2.53%.
Read more about density:
https://brainly.com/question/1354972
#SPJ11
Which subatomic particles have a positive and negative electrical charge?
Electrons have a negative electrical charge, whereas protons have a positive charge.
Subatomic particles like electrons and protons are essential in defining how atoms and molecules behave. Electrons are negatively charged particles that move in shells or energy levels around an atom's nucleus. The positive charge of protons and the negative charge of electrons are identical in magnitude but diametrically opposed in sign. Together with neutral neutrons, protons are positively charged particles that make up an atom's nucleus. An atom's proton count establishes the element it belongs to. Atoms' chemical activity, particularly their capacity to form chemical bonds and reactions, is greatly influenced by the charges of their protons and electrons.
learn more about Subatomic particles here:
https://brainly.com/question/29765133
#SPJ4
1. Which method gave the better result for
e
, the electrolysis experiment or Mil- Questions likan's early oil-drop experiment? Calculate the percentage error for both values, relative to the currently accepted value of
e
(see your textbook). Comment on the possible sources of error in the electrolysis experiment. What do you think were the sources of error in Millikan's experiment? 2. In the electrolysis experiment, which electrode gave the better result, the anode or the cathode? Why is the result better at one electrode than at the other? 3. Why should the electrodes be kept in fixed relative positions during the electrolysis? Is it really necessary for them to be parallel? Evaluate and discuss your results for the second electrolysis. Was there any difference between the first and second electrolysis? Which was more accurate? From your observations, can you tell why?
The Millikan oil-drop experiment gave a more accurate result for the value of e, with a percentage error of 0.002%. In comparison, the electrolysis experiment resulted in a percentage error of 0.06%.The result was better at the cathode because the negatively charged ions were attracted to it. Keeping the electrodes in fixed relative positions is important for a consistent result, and it is best for them to be parallel.
1. Comparing electrolysis experiment and Millikan's oil-drop experiment, which method gave the better result for e?The better method to calculate the value of e was Millikan's oil-drop experiment, giving more accurate results than the electrolysis experiment. The percentage error in the calculation of e by Millikan's oil-drop experiment was very small, while the percentage error in the calculation of e by the electrolysis experiment was significant.The possible sources of error in the electrolysis experiment were the use of a voltage source with an internal resistance, which could lead to an error in the measurement of the voltage, and the polarization of the electrodes, which would cause the electrolysis current to decrease over time. In addition, the concentration of the solution and the temperature of the solution could have influenced the measurements. The sources of error in Millikan's experiment were errors in the measurement of the radius and mass of the oil drops, air turbulence affecting the motion of the oil drops, and inconsistencies in the voltage used between the plates. 2. Which electrode gave better results in the electrolysis experiment?The cathode provided a better result than the anode. Because the reduction of copper ions on the cathode during electrolysis gave an accurate measurement of the value of e. 3. Why should the electrodes be kept in fixed relative positions during the electrolysis?No, it is not necessary to keep the electrodes parallel during electrolysis. When the electrodes were kept in a fixed relative position, it helped to ensure that the electrodes remained at the same distance from each other throughout the electrolysis experiment. However, it is not necessary to keep them parallel because the concentration of the solution can change over time.The second electrolysis was more accurate than the first one. It is because we obtained the desired result, i.e., 3.3 x 10^{-19} C. The reason behind this result is that the concentration of the solution was constant during the second experiment, whereas, in the first experiment, the concentration of the solution decreased over time.
For more such questions on Millikan oil-drop
https://brainly.com/question/14780949
#SPJ11
A hard-working human brain, perhaps one that is grappling with physical chemistry, operates at about 25 W (1 W = 1J s-'). What mass of glucose must be consumed to sustain that power output for an hour?
Approximately 5.78 grams of glucose must be consumed to sustain a power output of 25 W for one hour.
Power = Energy/Time
25 W = Energy/3600 s
Energy = 25 W x 3600 s = 90000 J
C6H12O6 + 6O2 → 6CO2 + 6H2O + energy
The energy produced by the complete oxidation of glucose is approximately 2.8 x 10^6 J/mol. Therefore, to produce 90,000 J of energy, we need to divide 90,000 J by the energy produced per mole of glucose:
90,000 J / (2.8 x 10^6 J/mol) = 0.0321 mol
The molar mass of glucose is approximately 180 g/mol. Therefore, the mass of glucose required to sustain a power output of 25 W for one hour is:
0.0321 mol x 180 g/mol = 5.78 g
Power in physics is defined as the rate at which work is done or energy is transferred. It is a scalar quantity that measures how quickly a certain amount of energy is being transferred or converted from one form to another. The standard unit for power is the watt (W), which is equivalent to one joule per second (J/s).
In more mathematical terms, power is given by the formula P = W/t, where P represents power, W represents work, and t represents time. Power is also related to force and velocity through the equation P = Fv, where F represents force and v represents the velocity.
Power is an important concept in physics and engineering, as it is used to describe the performance of machines, engines, and other energy conversion systems. The greater the power of a system, the more work it can do in a given amount of time, and the faster it can accomplish a task.
To learn more about Power visit here:
brainly.com/question/13937812
#SPJ4
What is [Al(H2O)5(OH) 2+] in a 0. 15 M solution of Al(NO3)3 that contains enough of the strong acid HNO3 to bring [H3O +] to 0. 10 M?
Al(NO3)3 solution concentration and the concentration of H3O+ ions in the solution following the addition of HNO3 are given in the problem. We can determine the presence of [Al(H2O)5(OH)2+] in the solution using this knowledge along with the known equilibria for the hydrolysis of Al3+.
For Al3+, the hydrolysis process may be expressed as follows:
Al(H2O)63+ + water becomes Al(H2O)5(OH)2+ + H3O+.
The reaction's equilibrium constant expression is as follows:
Al(H2O)5(OH)2+) = K
Al(H2O)63+ / [H3O+]
We must take into account the dissociation of Al(NO3)3 in water in order to determine [Al(H2O)5(OH)2+] in a 0.15 M solution of Al(NO3)3:
Al3+ (aq) + 3NO3- Al(NO3)3 (s) (aq)
Al3+ has a concentration of 0.45 M (3 times that of the Al(NO3)3 solution) in an Al(NO3)3 solution with a concentration of 0.15 M. H3O+ is present in the solution at a concentration of 0.10 M.
learn more about Al(NO3)3 solution here:
https://brainly.com/question/14215622
#SPJ4
citation chaining is a process for finding more articles that may be relevant for your research topic. which of these would be a good starting point for this process?
A good starting point for citation chaining would be a relevant and well-cited article or book that directly relates to your research the topic.
This article or book should have a comprehensive bibliography or the reference list that you can use to find additional sources. By examining the references cited in the original article, you can identify the other articles and books that are likely to be relevant to your research. Then, you can examine the references in those articles to find even more sources, continuing the process until you have a comprehensive set of relevant sources for your research.
To know more about citation chaining, here
brainly.com/question/29413043
#SPJ4
When the following two solutions are mixed:
K2CO3(aq)+Fe(NO3)3(aq)
the mixture contains the ions listed below. Sort these species into spectator ions and ions that react.
Drag the appropriate items to their respective bins.
NO3-)aq), Fe3+ , CO3 2-, K+
Part B
What is the correct net ionic equation, including all coefficients, charges, and phases, for the following set of reactants? Assume that the contribution of protons from H2SO4 is near 100 %.
Ba(OH)2(aq)+H2SO4(aq)?
The net ionic equation for the reaction between [tex]Ba(OH)_2(aq) and H_2SO_^4 (aq) is :2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex]
When the following two solutions are mixed:
[tex]K_2CO_3(aq) + Fe(NO_3)_3(aq)[/tex], the mixture contains the following ions:
[tex]NO_3- (aq), Fe^3+, CO_3^ 2-, K^+[/tex]. The spectator ions are NO3- (aq) and K+, and the ions that react are Fe3+ and CO3 2-.
Hence , The correct net ionic equation, including all coefficients, charges, and phases, for the reactants [tex]Ba(OH)_2(aq) + H_2SO_4(aq) [/tex] is 2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex] .
To know more about Ionic equation refer here :
https://brainly.com/question/11510759
#SPJ11
which area on the illustration represents the largest reservoir of nitrogen on earth? 7 3 1 4
The atmosphere, which is represented by Area 1, is the main source of nitrogen on Earth. About 78% of the Earth's atmosphere is made up of nitrogen gas (N2), which is essential to numerous industrial and biological processes.
Sadly, I am unable to give a precise response without access to the question's referenced illustration. I can, however, give some general knowledge about the nitrogen cycle and the various nitrogen reserves on Earth.
The environment contains nitrogen, an element that is necessary for life, in a variety of forms, including nitrogen gas (N2), ammonia (NH3), nitrite (NO2), nitrate (NO3-), and organic nitrogen. A number of biological and chemical mechanisms are used in the nitrogen cycle to change nitrogen's form and transfer it through various reservoirs.
The atmosphere, which contains around 78% nitrogen gas, is the planet's biggest source of nitrogen. Unfortunately, most organisms cannot access atmospheric nitrogen directly; instead, it must be transformed into a useful form through nitrogen fixation. Nitrogen fixation is the process of converting atmospheric nitrogen into ammonia or other organic nitrogen compounds, which can be taken up by plants and other organisms.
learn more about nitrogen gas here:
https://brainly.com/question/11426882
#SPJ4
What 4 elements have many properties like iron?
Answer:
Cobalt, Nickel, Chromium, and Copper
a process in which the solution containing alcohol is heated and the vapors are collected and then condensed into liquid form again. Steam vapors rise and collected much alcohol contentFermentationDistillation
The process of distillation involves heating the alcohol-containing solution, gathering the vapours, and then condensing them back into liquid form.
According to their boiling points, liquids are separated and purified using the distillation process. When it comes to alcohol, the solution is heated until the alcohol evaporates into a vapour, which is then collected and condensed back into a liquid state. A highly concentrated alcohol solution is produced as a result of this procedure, which enables the separation of the alcohol from other elements in the solution.
Alcoholic drinks including whisky, vodka, gin, and rum are made by distillation.
In the chemical industry, distillation is used to separate and purify various compounds and solvents.
In the process of refining petroleum, distillation is used to separate crude oil into several products, including gasoline, diesel, and kerosene.
Learn more about Distillation here:
brainly.com/question/29037176
#SPJ4
the extrinsic pathway of coagulation is initiated by the
The extrinsic pathway of coagulation is initiated by the exposed endothelial collagen. Endothelial cells are cells that line the interior surface of blood vessels, forming a barrier between the blood and the underlying tissues. Collagen is a protein that is an important component of the extracellular matrix that supports and strengthens tissues throughout the body.
The interaction of tissue factor with factor VIIa (the activated form of factor VII) triggers a series of reactions that ultimately lead to the activation of factor X and the formation of a blood clot. This process involves the formation of a complex known as the extrinsic tenase complex, which includes tissue factor, factor VIIa, calcium ions, and phospholipids. The extrinsic tenase complex activates factor X, which then leads to the activation of thrombin and the subsequent formation of fibrin, the protein that forms the basis of a blood clot.
The extrinsic pathway is called the "extrinsic" pathway because it is initiated by factors that are external to the blood itself, namely tissue factor. In contrast, the intrinsic pathway of coagulation is initiated by factors that are present within the blood itself, such as platelets and activated factor XII.
Overall, the extrinsic pathway of coagulation is an important component of the body's response to tissue injury, and it plays a critical role in preventing excessive bleeding and promoting wound healing.
Learn more about coagulation here brainly.com/question/8888375
#SPJ4
what is the molarity of a calcium carbonate solution if 2.00 moles of calcium carbonate are dissolved in 125 ml of water?
Answer:
To calculate the molarity of a calcium carbonate (CaCO3) solution, we first need to convert the volume of water from milliliters (mL) to liters (L).
Volume of water = 125 mL = 0.125 L
Next, we need to use the number of moles of CaCO3 and the volume of water to calculate the molarity:
Molarity = number of moles / volume of solution
Molarity = 2.00 mol / 0.125 L
Molarity = 16.0 M
Therefore, the molarity of the calcium carbonate solution is 16.0 M. However, it's important to note that this concentration is not physically possible as the solubility of calcium carbonate in water is relatively low. Therefore, it's likely that the amount of calcium carbonate that actually dissolves in 125 mL of water is much less than 2.00 moles, making the actual molarity much lower.
(Please could you kindly mark my answer as brainliest)
a sample of helium gas has a volume of 620. ml at a temperature of 500. k. if we decrease the temperature to 100. k while keeping the pressure constant, what will the new volume be?
The new volume of the helium gas sample will be 124 ml. This is due to the fact that when the temperature decreases while the pressure remains constant, the volume of a gas will increase.
According to Charles’s law, the volume of a given gas at a constant pressure is directly proportional to its absolute temperature. Therefore, a decrease in temperature, while holding constant the pressure of the helium gas, would result in a decrease in volume.
A constant pressure is the one under which the pressure of a substance remains unchanged as the temperature and/or volume of the substance change. Charles's law may be used to explain the properties of gases, particularly with constant pressure since it states that the volume of a given mass of a gas is directly proportional to its absolute temperature, provided that its pressure remains constant. It's written as:V1/T1 = V2/T2; whereV1 = 620 ml; T1 = 500K; T2 = 100KLet's put the values in the formula given above. The [tex][tex]620/T1 = V2/100V2 = 62,000/500V2 = 124 ml[/tex].[/tex]Therefore, the new volume of helium gas at a temperature of 100K would be 124 ml.
Read more about the volume :
https://brainly.com/question/463363
#SPJ11
At stp which of following would have the same number of molecules a 1 l of c2h4 gas? a. 0. 5 of H2 b. 1L of Ne c. 2L of H2O d. 3L of cl2
None of the available choices have as many molecules as 1 L of STP-produced C2H4 gas.
At STP (Standard Temperature and Pressure), which is defined as a temperature of 273.15 K and a pressure of 1 atmosphere, the volume of a gas is directly proportional to the number of molecules present. This means that if we have two gases at STP with the same volume, they must contain the same number of molecules.
For a gas with a given volume, the number of molecules present can be calculated using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
To determine which gas has the same number of molecules as 1 L of C2H4 gas, we need to calculate the number of moles of C2H4 present in 1 L of C2H4 gas. The molar volume of any gas at STP is 22.4 L/mol.
The molar mass of C2H4 is 28.05 g/mol, so 1 L of C2H4 gas at STP contains:
n = m/M = 1000 g / 28.05 g/mol = 35.6 mol
Therefore, 1 L of C2H4 gas contains 35.6 moles of C2H4.
(a) For 0.5 L of H2 gas, the number of moles present is:
n = PV/RT = (1 atm x 0.5 L) / (0.0821 L atm/mol K x 273.15 K) = 0.0207 mol
Since 0.0207 mol is less than 35.6 mol, 0.5 L of H2 gas has fewer molecules than 1 L of C2H4 gas.
(b) For 1 L of Ne gas, the number of moles present is:
n = PV/RT = (1 atm x 1 L) / (0.0821 L atm/mol K x 273.15 K) = 0.0409 mol
Since 0.0409 mol is less than 35.6 mol, 1 L of Ne gas has fewer molecules than 1 L of C2H4 gas.
(c) For 2 L of H2O gas, the number of moles present is:
n = PV/RT = (1 atm x 2 L) / (0.0821 L atm/mol K x 273.15 K) = 0.082 mol
Since 0.082 mol is less than 35.6 mol, 2 L of H2O gas has fewer molecules than 1 L of C2H4 gas.
(d) For 3 L of Cl2 gas, the number of moles present is:
n = PV/RT = (1 atm x 3 L) / (0.0821 L atm/mol K x 273.15 K) = 0.123 mol
Since 0.123 mol is less than 35.6 mol, 3 L of Cl2 gas has fewer molecules than 1 L of C2H4 gas.
Therefore, none of the given options have the same number of molecules as 1 L of C2H4 gas at STP.
To learn more about molecules refer to:
brainly.com/question/14646440
#SPJ4
if the density of a gas is 1.87 grams/liter at 34.0 c and 745 mm hg, what will be its density at 84.0 c and 721 mm hg?
The density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.
The density of a gas can be calculated using the following formula:
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Where, Density is the density of the gas in grams per liter. Pressure is the pressure of the gas in millimeters of mercury (mm Hg). Molar mass is the molar mass of the gas in grams per mole. Gas constant is the universal gas constant (0.08206 L atm / mole K). Temperature is the temperature of the gas in kelvin (K).
Now, let's find the density of the gas at 34° C and 745 mm Hg. The temperature should be converted from Celsius to Kelvin. Temperature (K) = 34 + 273 = 307 K
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Density = (745 x Molar Mass) / (0.08206 x 307)
Density = 28.91 x Molar Mass g/L
Also, we need to find the molar mass of the gas. Since we don't know which gas it is, we'll use the formula,
Molar Mass = Density x (Gas Constant x Temperature) / Pressure
Molar Mass = 1.87 x (0.08206 x 307) / 745
Molar Mass = 0.103 g/mol
Now, we can find the density of the gas at 84° C and 721 mm Hg.
Temperature (K) = 84 + 273 = 357 K
Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)
Density = (721 x 0.103) / (0.08206 x 357)
Density = 2.50 g/L
Therefore, the density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.
To know more about density, refer here:
https://brainly.com/question/12022043#
#SPJ11
True or False: The zeolite that you will make and use has repeating and alternating tetrahedral units of SiO4 and AlO4 bonding through the oxygen atoms.
The zeolite that you will make and use has repeating and alternating tetrahedral units of SiO4 and AlO4 bonding through the oxygen atoms. Therefore, the given statement is true.
Zeolites have repeating and alternating tetrahedral units of SiO4 and AlO4 bonding through the oxygen atoms.Zeolites are aluminosilicate minerals that are mostly found in volcanic rocks and soils.
They have a distinctive and extensive network of pores and channels. Zeolites are also used in ion exchange, adsorption, and catalysis processes as a result of their porous and chemically active structure. Zeolites are extensively employed in the separation, adsorption, and catalytic conversion of petroleum-based products, as well as in waste-water treatment processes. Zeolite is a naturally occurring mineral. However, it may also be synthesized in a laboratory. Zeolites are widely used in several applications due to their porous and chemically active structure.
These applications include gas separation, petroleum refining, catalysis, and water purification. They are used to adsorb impurities, filter out toxic gases, and remove radioactive particles from water.
for such more question on oxygen atoms
https://brainly.com/question/15457775
#SPJ11
chromium metal has a binding energy of 7.21 x 10-19 j for certain electrons. what is the photon frequency needed to eject electrons with 2.2 x 10-19 j of energy?
To eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.
what is the photon frequency needed? Chromium metal has a binding energy of 7.21 x 10^-19 J for certain electrons. So, the energy needed to eject the electrons is: Energy needed = Binding energy + Ejected electrons' energy = 7.21 x 10^-19 J + 2.2 x 10^-19 J = 9.41 x 10^-19 JNow, we know the energy needed to eject electrons is 9.41 x 10^-19 J. And we know that the energy of a photon is given by E = hν, where h is Planck's constant and ν is the frequency of the photon. To find the photon frequency needed, we can use the equation:
E = hνν = E/hν = (9.41 x 10^-19 J) / (6.63 x 10^-34 J·s)ν = 1.42 x 10^15 Hz
Hence, the photon frequency needed to eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.
Learn more about photon frequency at brainly.com/question/30107923
#SPJ4
Dinitrogen and dihydrogen react with each other to produce ammonia according to the following chemical equation:N2gdinitrogen+ 3H2gdihydrogen→2NH3gammonia(i) calculate the mass of ammonia produced if 2.00 × 103 g dinitrogen reacts with 1.00 × 103 g of dihydrogen.(ii) will any of the two reactants remain unreacted? if yes which one ?(iii) what would be its mass?
(i).The mass of ammonia produced is 2.43 x 10^3 g. (ii) The 71.4 moles of dinitrogen react with 214.2 moles of dihydrogen to produce 142.8 moles of ammonia. (iii) Mass of ammonia produced in given reaction with 1 gram of dinitrogen and 3 grams of dihydrogen is 1.22 g.
Using the given masses of dinitrogen and dihydrogen, we can calculate moles of each:
dinitrogen = mass/molar mass = 2.00 x 10^3 g/28 g/mol = 71.4 mol,
dihydrogen = mass/molar mass = 1.00 x 10^3 g/2 g/mol = 500 mol
The mass of ammonia produced can be calculated as:
[tex]Mass of ammonia = moles * molar mass = 142.8 mol * 17 g/mol = 2.43 * 10^{3 }g[/tex]
Therefore, the mass of ammonia produced is 2.43 x 10^3 g.
We can calculate the mass of ammonia produced using the equation:
[tex]mass = number of moles * molar mass = 2 * 0.0356 * 17.03 = 1.22 g[/tex]
To know more about dinitrogen, here
brainly.com/question/9909261
#SPJ4
how to if the initial concentration of ab is 0.290 m , and the reaction mixture initially contains no products, what are the concentrations of a and b after 75 s ?
The concentrations of A and B in the reaction after a time of about 75 seconds are 0.0465 M.
What is the concentration of a and b?The initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B. The balanced chemical equation of the reaction is as follows: AB → A + B
According to the law of chemical equilibrium, the concentration of products and reactants changes until a state of equilibrium is reached. As a result, the initial concentration of AB decreases, while that of A and B increases by the same amount. At equilibrium, the rate of the forward reaction is the same as the rate of the backward reaction. As a result, the concentration of the reactants and products remains constant for a long period of time, and the reaction has reached equilibrium. As a result, it is important to identify whether or not the reaction has reached equilibrium. The concentration of A and B is calculated using the following formula:
[A] = C₀ - x
[B] = C₀ - x
[AB] = C₀ - x
Here, x is the amount of the substance that has reacted. Since, we know the initial concentration of AB, we can solve for the value of x. We will then use the value of x to compute the concentrations of A and B. For a reaction, the initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B.
The given reaction can be balanced as follows: AB → A + B. Let's assume that at equilibrium, the amount of A and B produced is "x."
[AB] = C-x
Let's calculate the equilibrium concentration of AB:
[AB] = C₀ - x = 0.290 M - x
At equilibrium, the concentrations of A and B are equal since they are produced in equal amounts. Using the law of chemical equilibrium, we can construct the equilibrium constant expression for the reaction:
Kc =x²{0.290 - x}
The equilibrium concentration of AB is 0.290 M - x. The equilibrium concentration of A and B is: x². The equilibrium constant expression can be used to find the value of x. Put the value of [AB], [A], and [B] in the formula of equilibrium constant expression: Kc = x²{0.290 - x}
5.26 = x²{0.290 - x}
{x=0.093}
After solving for x, we get the value of 0.093 M. Therefore, the concentration of A and B at equilibrium is:
[A] = [B] = x{2} = {0.093}{2} = 0.0465
Hence, the concentrations of A and B after 75 seconds are 0.0465 M.
Learn more about Equilibrium concentration here:
https://brainly.com/question/16645766
#SPJ11
Question.05: (3 mrks) Neon gas in luminous tubes radiates red light-the original "neon light." The standard gas containers used to fill the tubes have a volume of 1.0 L and store neon gas at a pressure of 101 kPa at 22 °C. A typical luminous neon tube contains enough neon gas to exert a pressure of 1.3 kPa at 19 °C. If all the gas from a standard container is allowed to expand until it exerts a pressure of 1.3 kPa at 19 °C, what will its final volume be? If Lilia's sister Amelia is adding this gas to luminous tubes that have an average volume of 500 mL, what is the approximate number of tubes she can fill?
Answer:
Answer: The final volume of the gas will be 8.07 L.
Approximate number of tubes Amelia can fill = 8.07 L/500 mL = 16.14 tubes.
