Answer:
To write the equation of a circle given its center and a point on the circle, we need to use the standard form of the equation of a circle, which is:
(x - h)^2 + (y - k)^2 = r^2
where (h, k) is the center of the circle and r is the radius.
Let's use point A as the point on the circle. We are given that the center of the circle is (4, -2) and point A is (6, 1). We can use the distance formula to find the radius of the circle:
r = √[(6 - 4)^2 + (1 - (-2))^2] = √[4^2 + 3^2] = 5
Now we can substitute the center and radius into the standard form equation:
(x - 4)^2 + (y + 2)^2 = 5^2
Simplifying and expanding the right-hand side, we get:
(x - 4)^2 + (y + 2)^2 = 25Therefore, the equation of the circle is (x - 4)^2 + (y + 2)^2 = 25 and we used point A to find it.
I NEED HELPP PLEASEEEEEEEE
The slope between the points (-3, 0) and (0, -1) is -1/3.
What is slope?The slope of a line serves as a gauge for its steepness. It may be calculated by dividing the difference in y-coordinate by the difference in x-coordinate between any two points on a line. A line's slope might be zero, positive, negative, or undefinable. A line with a positive slope is moving upward from left to right, a negative slope is moving downward from left to right, and a line with a zero slope is level. The line is vertical if the slope is undefinable.
Let us consider the first two points (-3, 0) and (0, -1).
The slope of the line is given as:
m = (y2 - y1) / (x2 - x1)
Substituting the values we have:
m = (-1 - 0) / (0 - (-3)) = -1/3
Hence, the slope between the points (-3, 0) and (0, -1) is -1/3.
Learn more about slope of line here:
https://brainly.com/question/11559942
#SPJ1
1 0 6
0 1 1
0 0 0
Find the solution(s) to the system, if it exists. State the solution as a point (be sure to use parentheses), use parameter(s) s and t if needed. If the system is inconsistent, then state no solution.
The system has infinitely many solutions, which can be written as (x, y, z) = (1 - 60s, -10 + 600s, s) where s is a parameter.
To solve the system of equations:
1x + 0y + 60z = 1
1x + 10y + 0z = 0
0x + 0y + 0z = 0
The third equation is an identity, implying that it does not give us any new information. The first two equations can be used to solve for x, y, and z:
From the first equation, we get x = 1 - 60z
From the second equation, we get y = 0 - 10x = -10(1 - 60z) = -10 + 600z
Therefore, the solution to the system can be written as a point in terms of z as:
(x, y, z) = (1 - 60z, -10 + 600z, z)
Since z can take on any value, there are infinitely many solutions to the system, which can be parameterized as:
(x, y, z) = (1 - 60s, -10 + 600s, s) where s is a parameter.
he system has infinitely many solutions, which can be written as (x, y, z) = (1 - 60s, -10 + 600s, s) where s is a parameter.
For more questions like Equation click the link below:
https://brainly.com/question/29657983
#SPJ11
I need help, what does this mean
Answer:
2125 ft/min
33,000 ft
y = -2125x + 33,000
Step-by-step explanation:
A. -2125 feet per minute. You get this number when you divide 17,000 by 8 (rise over run). You could also use the formula y2-y/x2-x1 with the points (0, 33,000) and (8, 17,000).
B. 33,000 feet is the height of the plane before it starts descending, so it must be the starting value.
C. Plug in the values you got for A and B into the slope formula y = mx + b
y = -2125x + 33,000
an equation of a circle is given by (x+3)^2+(y_9)^2=5^2 apply the distributive property to the square binomials and rearrange the equation so that one side is 0.
The equation of the circle is [tex]x^2 + y^2 + 6x - 18y + 65 = 0[/tex].
Given:
Equation of the circle is [tex](x+3)^2+(y-9)^2=5^2[/tex]
Expand the equation
[tex](x+3)^2 = (x+3)(x+3) = x^2 + 3x + 3x + 9 = x^2 + 6x + 9[/tex]
[tex](y-9)^2 = (y-9)(y-9) = y^2 - 9y - 9y + 81 = y^2 - 18y + 81[/tex]
[tex]5^2 = 25[/tex]
Then, substitute the expanded expressions into the equation
[tex](x+3)^2+(y-9)^2=5^2\\(x^2 + 6x + 9) + (y^2 - 18y + 81) = 25\\[/tex]
Simplify and combine like terms
[tex](x^2 + 6x + 9) + (y^2 - 18y + 81) = 25\\x^2 + y^2 + 6x - 18y + 90 = 25[/tex]
Rearrange the equation so that one side is 0
[tex]x^2 + y^2 + 6x - 18y + 90 = 25\\x^2 + y^2 + 6x - 18y + 90 - 25 = 0\\x^2 + y^2 + 6x - 18y + 65 = 0[/tex]
Thus, the equation of a circle [tex](x+3)^2+(y-9)^2=5^2[/tex] can be rearranged using the distributive property to form [tex]x^2 + y^2 + 6x - 18y + 65 = 0[/tex], with one side equaling 0.
Learn more about distributive property here: https://brainly.com/question/2807928
#SPJ11
What is an equation for the quadratic function represented by the table shown?
The village of Hampton has 436 families 238 of the families live within 1 mile of the village square use mental math to find how many families live farther than 1 mile from the square show your work
Answer: 198 families live farther than 1 mile from the square.
Step-by-step explanation:
We know that there are 238 families that live within 1 mile of the village square. To find the number of families that live farther than 1 mile from the square, we can subtract 238 from the total number of families:
436 - 238 = 198
Therefore, 198 families live farther than 1 mile from the square. We can do this subtraction mentally without needing a calculator.
The graph shows the velocity, v metres per second, of a car at time t seconds. Work out an estimate for the distance the car travelled for the first 8 seconds. Use 4 strips of equal width. -1-500- -1000- -500 0 V t
please help!!!
To estimate the distance traveled we need to find the area under the velocity-time graph from 0 to 8 seconds So,The estimate for the distance the car traveled for the first 8 seconds is 4000 meters.
Define velocity-time graph?A velocity-time graph is a graphical representation that shows the velocity of an object on the y-axis and time on the x-axis. It is used to depict the change in velocity over time and can provide information about the acceleration or deceleration of an object.
The height of each strip can be estimated by taking the average of the velocities at the beginning and end of the strip.
Using the trapezium rule, the estimated area of each strip is:
Strip 1: 0.5 x (0 + 2) x (0 + (-500)) = -500 m/s
Strip 2: 0.5 x (2 + 4) x (-500 + (-1000)) = -1500 m/s
Strip 3: 0.5 x (4 + 6) x (-1000 + (-500)) = -1500 m/s
Strip 4: 0.5 x (6 + 8) x (-500 + 0) = -500 m/s
The total estimated area is the sum of the areas of the 4 strips:
Total estimated area = -500 + (-1500) + (-1500) + (-500) = -4000 m/s
Since the area represents the distance traveled by the car, we can take the absolute value of the area to get the estimated distance traveled:
Estimated distance traveled is = |-4000| = 4000 meters
To know more about areas visit:
https://brainly.com/question/18066837
#SPJ1
In a regular pentagon PQRST. PR intersects QS
at O. Calculate angle ROS.
Answer: 72°
Step-by-step explanation:
To find the interior angle of this shape, use the formula 180(n-2)/n, where n is the amount of sides. Plugging 5 in for the interior angle of a pentagon, you get 180(3)/5, or 108°.
Using the statement that PR intersects QS, we can see that triangle QOR is isosceles (to get this, look at triangle PQR, and note that because it has 2 equal side lengths, and its last length is not equivalent to the other 2 sides, it is isosceles). Solving for angle PRQ, we know one angle is 108°, and the other two are equal. The total angle in a triangle is 180°, so (180°-108°)/2 = 36° (angles QPR and PRQ).
Since the angle of R = 108°, we can find angle PRS as 108° - 36°, or 72°. Since triangles PQR and QRS are similar (share the same angles and side lengths), we can see that angle RQS and RSQ are both 36°.
Since ORS is a triangle, its angle total is 180°. Since we know the angles ORS and OSR (respectively) already as 72° and 36°, we can subtract these angles to find angle ROS. 180°-72°-36° = 72°
a parachutist rate during a free fall reaches 132 feet per second. what is this rate in meters per second? at this rate, how many meters will the parachutist fall during 10 seconds of free fall. in your computations, assume that 1 meter is equal to 3.3 feet. (do not round your answer)
Parachutist's rate during free fall is 40 meters per second and will fall approximately 490 meters during 10 seconds of free fall.
How to convert feet to meters?First, we need to convert 132 feet per second to meters per second. We know that 1 meter is equal to 3.3 feet, so we can use the following conversion factor:
[tex]$\frac{3meter}{3.3 feet}[/tex]
To convert feet per second to meters per second, we can multiply by the conversion factor:
[tex]132 (\frac{1}{3.3} ) = 40 meters/second[/tex]
Therefore, the parachutist's rate during free fall is 40 meters per second.
Next, we can use the following formula to find the distance the parachutist falls during 10 seconds of free fall:
distance =[tex]\frac{1}{2}[/tex] * acceleration * time²
where acceleration due to gravity is approximately 9.8 meters/second^2.
Substituting the given values, we get:
distance = [tex]\frac{1}{2}[/tex] * 9.8 meters/second² * (10 seconds)²
distance = 490 meters
Therefore, the parachutist will fall approximately 490 meters during 10 seconds of free fall.
To know more about Foot visit:
brainly.com/question/14230645
#SPJ1
Alfonso wants to purchase a pool membership
for the summer. He has no more than y dollars to
spend. The Aquatics Club charges an initial fee
of $75 plus $20 per month. The Swimming Hole
charges an initial fee of $15 plus $65 per month.
Write a system of inequalities that you can use to
determine which company offers the better deal.
Let x represent the number of months.
The system of inequalities of the company with the better offer is 75 + 20x ≤ y and 15 + 65x ≤ y
Identifying the system of inequalitiesLet's use A to represent the total cost (in dollars) of purchasing a pool membership from the Aquatics Club,
Let S represent the total cost of purchasing a pool membership from the Swimming Hole.
Then we can write the following system of inequalities:
A = 75 + 20x (total cost of Aquatics Club membership)
S = 15 + 65x (total cost of Swimming Hole membership)
Alfonso has no more than y dollars to spend
So, we have
75 + 20x ≤ y
15 + 65x ≤ y
Hence, the system is 75 + 20x ≤ y and 15 + 65x ≤ y
Read more about system of inequalities at
https://brainly.com/question/23093488
#SPJ1
Luke bought 4 kilograms of apples and 0.29 kilograms of oranges. How much fruit did he buy
in all?
He bought 4.29 Kilos of fruit.
4+0.29=4.29
Luke bought 4.29 kilograms of fruit in all
Step-by-step explanation:
Simple addition will be used to find the total fruit Luke bought.
Given
Amount of apples he bought = 4 kilograms
Amount of oranges he bought = 0.29 kilograms
so the total fruit will be:
[tex]\text{total fruit}=\text{Apples}+\text{oranges}[/tex]
[tex]=4+0.29[/tex]
[tex]=4.29[/tex]
So,
Luke bought 4.29 kilograms of fruit in all
Keywords: Measurement, addition
Learn more about addition at:
https://brainly.com/question/568799https://brainly.com/question/567922#LearnwithBrainly
The average between 3. 15 and x is 40 what is x?
The value of x that makes the average between 3.15 and x equal to 40 is 76.85.
In this problem, we are given two numbers, 3.15 and x, and told that the average between them is 40. We can set up an equation to solve for x as follows:
(3.15 + x) / 2 = 40
To find the average between 3.15 and x, we add the two numbers together and divide by 2, which gives us the equation above.
To solve for x, we can start by multiplying both sides of the equation by 2:
3.15 + x = 80
Next, we can subtract 3.15 from both sides of the equation:
x = 76.85
To know more about average here
https://brainly.com/question/16956746
#SPJ4
Consider a square whose side-length is one unit. Select any five points from inside this square. Prove that at least two of these points are within squareroot 2/2 units of each other.
The given square with a side length of one unit is known to contain five points. One must prove that at least two of these points are within square root 2/2 units of each other.
According to the Pigeonhole principle, "if n items are put into m containers, with n > m, then at least one container must contain more than one item."In this context, the square is the container, and the points inside it are the objects. If more than four points are picked, the theorem is true, and two points are nearer to each other than the square root of 2/2 units.
Let's place four points on the square's four corners. The distance between any two of these points is the square root of two units since the square's side length is 1.
Let's add another point to the mix. That point is either inside the square or outside it. Without loss of generality, let us assume that the point is inside the square. It must then be within the perimeter outlined by joining the square's corners to the point that was not a corner already.
The perimeter of the square described above is a square with a side length of square root 2 units.
Since we have five points in the square, at least two of them must be in the same smaller square, due to the pigeonhole principle. Without loss of generality, let's assume that two of the points are in the upper-left square. As a result, any points within this square are within the square root 2 units of any of the other four points. Hence, at least two points of the five selected are within the square root of 2/2 units of each other.
To know more about the "pigeonhole principle": https://brainly.com/question/13982786
#SPJ11
when performing a hypothesis test based on a 95% confidence level, what are the chances of making a type ii error?
When performing a hypothesis test based on a 95% confidence level, the chances of making a type II error are 5%.
The process of hypothesis testing is used to determine whether or not a given statistical hypothesis is valid. The objective of this method is to determine whether the null hypothesis can be accepted or rejected based on the sample data obtained.
Hypothesis testing can be used to evaluate two hypotheses. The null hypothesis is the one that must be accepted or rejected, while the alternative hypothesis is the one that must be supported. In other words, hypothesis testing is a way of determining whether the null hypothesis is reasonable or not.
The Type II error is defined as the error that occurs when the null hypothesis is not rejected even though it is incorrect. In hypothesis testing, this type of error is referred to as a beta error or a false-negative error. The chances of making a Type II error depend on several factors, including the sample size, the level of significance, and the power of the test. When the level of significance is lowered to 0.05, the chances of making a Type II error are 5%.
To learn more about type II error refer :
https://brainly.com/question/30699536
#SPJ11
Factor completely.
7b^2-63
Thank you :DDD
Since both terms are perfect squares, factor using the difference of squares formula, [tex]a^2-b^2=(a+b)(a-b)[/tex] where [tex]a=b[/tex] and [tex]b=3[/tex]
Answer:[tex]7(b+3)(b-3)[/tex]An avid gardener wants to know which of two brands of fertilizer is best for her tomatoes. The two brands of fertilizer are A and B. She plants five pairs of tomato plants in two rectangular planters and places them beside one another. She gives each set of tomato plants the same amount of water each day, only she gives one set of plants fertilizer A and the other set of plants fertilizer B. At the end of the growing season, she counts the number of tomatoes each plant has yielded. Assume that all conditions for inference have been met. The rectangular planters are lined up so that plant 1 is beside plant 6, and plant 2 is beside plant 7, and so on. The yield for the five pairs of tomato plants are given. Plant 1 2 3 4 5 Yield with Fertilizer A 7 6 5 8 10 Plant 6 7 8 9 10 Yield with Fertilizer B 4 7 6 5 3 The gardener believes that fertilizer A enhances the yield of her tomatoes more than fertilizer B. She uses the following order of subtraction when determining the difference in the yields for the two brands: A- B (a) We would like to carry out a t test for the population mean difference. Calculate the point estimate. (b) Calculate the standard deviation of the differences. (Round your answer to three decimal places.) (c) Calculate the test statistic. (Round your answer to two decimal places.)
(a) Point estimate (mean difference): 2.2 tomatoes. (b) The standard deviation of differences: Approximately 3.47. (c) The test statistic: Approximately 1.38.
To perform a t-test for the population mean difference, follow these steps:
(a) Calculate the point estimate (mean difference): The point estimate is the mean difference between the yields of fertilizer A and fertilizer B.
Mean difference = (Sum of differences) / Number of pairs
Using the given data gives:
Mean difference = ((7-4) + (6-7) + (5-6) + (8-5) + (10-3)) / 5
Subtracting gives:
Mean difference = (3 - 1 - 1 + 3 + 7) / 5
Solving gives:
Mean difference = 11 / 5
Dividing gives:
Mean difference = 2.2
(b) Calculate the standard deviation of the differences:
To calculate the standard deviation of the differences, we need to calculate the squared differences, find their sum, divide by (n-1), and then take the square root.
Squared differences:[tex](3 - 2.2)^2, (-1 - 2.2)^2, (-1 - 2.2)^2, (3 - 2.2)^2, (7 - 2.2)^2[/tex]
Solving gives:
Sum of squared differences = (0.64 + 12.96 + 12.96 + 0.64 + 21.16)
Solving gives:
The sum of squared differences = 48.36
The standard deviation of the differences [tex]= \sqrt{48.36 / 4}[/tex]
Solving gives:
The standard deviation of the differences [tex]= \sqrt{2.09}[/tex]
Rounded to three decimal places
The standard deviation of the differences ≈ 3.47
c) Calculate the test statistic:
The test statistic (t) = (Point estimate - Null hypothesis value) / (Standard deviation /√(sample size))
Let's assume the null hypothesis is that there is no difference between the two fertilizers
(i.e., mean difference = 0).
[tex]t = (2.2 - 0) / (3.47 / \sqrt5)[/tex]
Substituting [tex]\sqrt 5 = 2.236[/tex]
t = 2.2 / (3.47 / 2.236)
Rounded to two decimal places
t ≈ 1.378
So, the test statistic is approximately 1.378.
The gardener can compare this test statistic to critical values from the t-distribution to determine whether the difference between the two fertilizers is statistically significant at a certain significance level. If the calculated test statistic is greater than the critical value, she ma
Learn more about t-tests here:
https://brainly.com/question/1189751
#SPJ12
The tires on Mavis’ car will have to be replaced when they each have 160 000 km of wear on them. If new tires cost $140.00 each, what is the total cost of the wear on Mavis’ tires for a year in which she drives 25 000 km?
Answer:
If the tires on Mavis’ car have to be replaced when they each have 160 000 km of wear, then the total distance Mavis can drive on a set of tires is:
4 tires * 160,000 km = 640,000 km
If Mavis drives 25,000 km in a year, she will need to replace her tires after:
640,000 km ÷ 25,000 km/year = 25.6 years
Since Mavis will need to replace her tires once every 25.6 years, the cost of the wear on her tires for a single year is:
$140.00/tire * 4 tires = $560.00
So the total cost of the wear on Mavis’ tires for a year in which she drives 25,000 km is $560.00.
Step-by-step explanation:
source: trust me bro
What are the zeros of the function? Set the function = 0, factor, and use the zero-product property. Show your steps!
f(x) = x² + 7x – 60
(100 POINTS AND BRAINLIEST)
The zeroes of the function are -12 and 5.
What is meant by Zeros of the function?Zeros of a function are the values of the input variables that make the output of the function equal to zero. The zeros are the solutions of equation f(x) = 0.
According to the question:
To find the zeros of the function
f(x) = x² + 7x - 60, we must set f(x) equal to zero and solve for x.
So we start with the equation:
x² + 7x - 60 = 0
Next, we need to factor the left side of the equation. We are looking for two numbers that multiply to -60 and add to 7. After some trial and error, we find that the numbers are 12 and -5:
x² + 7x - 60 = (x + 12)(x - 5) = 0
Now we can apply the zero product property, which states that if the product of two factors is zero, then at least one of the factors must be zero. Therefore, we set each factor equal to zero and solve for x:
x + 12 = 0 or x - 5 = 0
Solving for x, we get:
x = -12 or x = 5
The zeros of the function f(x) = x² + 7x - 60 are therefore x = -12 and x = 5.
To know more about Zeros of the function visit:
brainly.com/question/16633170
#SPJ1
how to calculate the product of two random variable that follows normal distribution with mean 0 and variance 1
The product of two random variables that follows the normal distribution with mean 0 and variance 1 is expected 0.
To compute the product of two random variables that are normal distributed with a mean of 0 and a variance of 1, the following procedure can be employed:
Since the mean of the normal distribution is 0 and the variance is 1, we can assume that the standard deviation is also 1.Thus, we can write the probability density function of the normal distribution as:
f(x) = (1/√2π) * e^(-x^2/2)
Using the definition of expected value, we can write the expected value of a random variable X as:E[X] = ∫x * f(x) dx, where the integral is taken over the entire range of X.
Similarly, we can write the expected value of a random variable Y as:E[Y] = ∫y * f(y) dy, where the integral is taken over the entire range of Y.
Since the two random variables are independent, the expected value of their product is the product of their expected values. Thus, we can write:E[XY] = E[X] * E[Y]
Substituting the probability density function of the normal distribution into the expected value formula, we can write:E[X] = ∫x * f(x) dx = ∫x * (1/√2π) * e^(-x^2/2) dx = 0
E[Y] = ∫y * f(y) dy = ∫y * (1/√2π) * e^(-y^2/2) dy = 0
Thus, the expected value of the product of two random variables that follow a normal distribution with mean 0 and variance 1 is:E[XY] = E[X] * E[Y]
= 0 * 0 ⇒ 0
Therefore, the product of two random variables that follow a normal distribution with mean 0 and variance 1 has an expected value of 0.
To know more about the "normal distribution": https://brainly.com/question/4079902
#SPJ11
Please help quick with this question.
Answer:
b = [tex]\frac{S-2la}{h+l}[/tex]
Step-by-step explanation:
S = bh + lb + 2la ( reversing the equation )
bh + lb + 2la = S ( subtract 2la from both sides )
bh + lb = S - 2la ← factor out b from each term on the left side
b(h + l) = S - 2la ← divide both sides by (h + l)
b = [tex]\frac{S-2la}{h+l}[/tex]
Y=3x+3 what is the slope and y intercept
Answer:
y-intercept is (0,3) and the slope is 3
Step-by-step explanation:
Answer: the slope is 3x while 3 is the y-intercept.
Step-by-step explanation:
Question
Find the value of y
for the given value of x
.
y=x+5;x=3
Answer: y is equal to 8
Step-by-step explanation:
by substituting the x for its vale of three we can add the two values to get 8 or y=8
Use substitution to solve -4x + y = 3, 5x - 2y = -9
Using the substitution method, the solution of the system of equations -4x + y = 3 and 5x - 2y = -9 is (x, y) = (1, 7)
We can solve this system of equations using the substitution method by solving for one variable in terms of the other in one equation, and then substituting that expression into the other equation. Here's how:
-4x + y = 3 (Equation 1)
5x - 2y = -9 (Equation 2)
Solving Equation 1 for y, we get:
y = 4x + 3
Now, we substitute this expression for y into Equation 2 and solve for x:
5x - 2(4x + 3) = -9
5x - 8x - 6 = -9
-3x = -3
x = 1
We have found the value of x to be 1. Now, we substitute this value back into Equation 1 to find the value of y:
-4(1) + y = 3
y = 7
Therefore, the solution to the system of equations is (x, y) = (1, 7)
Learn more about substitution method here
brainly.com/question/14619835
#SPJ4
Salaries for teachers in a particular state have a mean of $ 52000 and a standard deviation of $ 4800. a. If we randomly select 17 teachers from that district, can you determine the sampling distribution of the sample mean? Yes If yes, what is the name of the distribution? normal distribution The mean? 52000 The standard error? b. If we randomly select 51 teachers from that district, can you determine the sampling distribution of the sample mean? ? If yes, what is the name of the distribution? The mean? The standard error? C. For which sample size would I need to know that population distribution of X, teacher salaries, is normal in order to answer? ? v d. Assuming a sample size of 51, what is the probability that the sampling error is within $1000. (In other words, the sample mean is within $1000 of the true mean.) e. Assuming a sample size of 51, what is the 90th percentile for the AVERAGE teacher's salary? f. Assuming that teacher's salaries are normally distributed, what is the 90th percentile for an INDIVIDUAL teacher's salary?
a. Yes, the sampling distribution of the sample mean is a normal distribution with a mean of $52000 and a standard error of $\frac{4800}{\sqrt{17}}$.
b. Yes, the sampling distribution of the sample mean is a normal distribution with a mean of $52000 and a standard error of $\frac{4800}{\sqrt{51}}$.
c. You would need to know that the population distribution of X, teacher salaries, is normal in order to answer the questions regarding any sample size.
d. Assuming a sample size of 51, the probability that the sampling error is within $1000 is approximately 0.84 or 84%.
e. Assuming a sample size of 51, the 90th percentile for the average teacher's salary is approximately $54488.
f. Assuming that teacher's salaries are normally distributed, the 90th percentile for an individual teacher's salary is approximately $56396.
Learn more about mean:
https://brainly.com/question/20118982
#SPJ11
Hi. Please help me convert this non-linear to linear form y=mx+c. The answer is square root of y= 6/p x - 2/q .
Thank you so much.
Answer: To convert the given equation, √y = (6/p)x - (2/q), into the linear form y = mx + c, we can use the following steps:
Square both sides of the equation to eliminate the square root:
√y = (6/p)x - (2/q)
√y^2 = (6/p)x - (2/q)^2
Simplifying the right-hand side, we get:
y = (36/p^2)x - (4/q) + 4/q^2
Rearrange the equation to the form y = mx + c:
y = (36/p^2)x + (4/q^2 - 4/q)
So the linear form of the given non-linear equation is y = (36/p^2)x + (4/q^2 - 4/q).
Step-by-step explanation:
using the net below find the area of the triangular prism
6 cm
3 cm
4 cm
6 cm
5 cm
2 cm
Answer:153
Step-by-step explanation:
Let n be a positive integer. If a == (3^{2n}+4)^-1 mod(9), what is the remainder when a is divided by 9?
Let n be a positive integer. We can use the properties of modular arithmetic to calculate this remainder. Let's start with a = (32n + 4)-1 mod 9. We can rewrite this as a = 9 - (32n + 4)-1 because 9 = 0 mod 9.
We can use Fermat's Little Theorem to calculate (32n + 4)-1. This theorem states that (32n + 4)-1 mod 9 = (32n + 4)8 mod 9.
Using the identity (a + b)n mod m = ((a mod m) + (b mod m))n mod m, we can simplify the equation to (32n mod 9 + 4 mod 9)8 mod 9.
32n mod 9 = 0, so (32n mod 9 + 4 mod 9)8 mod 9 = 48 mod 9 = 1.
Finally, a = 9 - 1 = 8 mod 9, so the remainder when a is divided by 9 is 8.
Learn more about positive integer:
https://brainly.com/question/16952898
#SPJ11
Let A, B, and C be subsets of some universal set U. (a) Draw two general Venn diagrams for the sets A, B, and C. On one, shade the region that represents A - (B nC), and on the other, shade the region that represents (A -B) U (A C). Based on the Venn diagrams, make a conjecture about the relationship between the sets A-(BnC) and (A -B)U (A -C). (b) Use the choose-an-element method to prove the conjecture from Exer- cise (5a). (c) Use the algebra of sets to prove the conjecture from Exercise (5a).
In conclusion, we can prove that[tex](A -B) U (A C)[/tex] is a superset of[tex]A - (B nC)[/tex] using both the choose-an-element method and the algebra of sets.
To answer this question, let's first draw two Venn diagrams to represent the sets A, B, and C. In the first Venn diagram, shade the region that represents[tex]A - (B nC)[/tex].
This is the region outside of the intersection of B and C and inside of A. In the second Venn diagram, shade the region that represents [tex](A -B) U (A C).[/tex] This is the union of the region outside of B and the region outside of C, both of which are inside of A. Based on these diagrams, we can make the conjecture that (A -B) U (A C) is a superset of A - (B nC).
To prove this conjecture, we can use the choose-an-element method. Let a be an element of A - (B nC). This means that a is in A, but not in B or C. Since a is in A, it is also in (A -B) U (A C), and therefore (A -B) U (A C) is a superset of A - (B n C).
We can also use the algebra of sets to prove this conjecture.[tex]A - (B n C) = (A -B) U (A -C) since A - (B n C)[/tex]is the union of the regions outside of B and outside of C, both of which are inside of A. This implies that (A -B) U (A C) is a superset of A - (B nC).
for such more questions on Venn diagram
https://brainly.com/question/30599101
#SPJ11
Bella is splitting her rectangular backyard into a garden in the shape of a trapezoid and a fish pond in the shape of a right triangle. What is the area of her garden?
The Area of Bella's garden as required to be determined in the task content is the difference of the area of the rectangular backyard and the right triangular fish pond.
What is the area of Bella's trapezoidal garden?It follows from the task content that the area of Bella's trapezoidal garden is to be determined from the given information.
Since the garden and the fish pond are from the rectangular backyard; the sum of their areas is equal to the area of the backyard.
Ultimately, the area of the garden is the difference of the area of the rectangular backyard and the right triangular fish pond.
Read more on difference;
https://brainly.com/question/28368605
$SPJ1
48 identical looking bags of lettuce were delivered to Circle J grocers. Unfortunately, 12 of these bags of lettuce are contaminated with listeria. Joe, from Joes Cafe randomly selects 4 bags of the lettuce for his cafe. Let X equal the number of the selected packets which are contaminated with listeria. a. How many possible ways are there to select the 4 out of 48 packets (order does not matter) without replacement? b. What is the probability thatX=0
c. What is the probability thatX=4? d. What is the probability thatx>2? e. What is the expected value ofX? f. What is the standard deviation ofX? g. What is the probability that X is smaller than its expected value?
h. What is the probability thatX=5?
Probability that X = 5:Since, Joe selects only 4 bags of lettuce. X can't be 5.P(X=5) = 0Hence, the probability that X = 0 is 0.3164 and the probability that X = 5 is 0.
The given problem can be solved using the concept of binomial distribution.
In the given question, there are 48 bags of lettuce out of which 12 bags are contaminated with listeria.
Joe selects 4 bags of lettuce. X is the random variable which represents the number of contaminated bags of lettuce selected by Joe. X can take values from 0 to 4. (as Joe selects only 4 bags).
Part A)Number of ways to select 4 bags of lettuce out of 48:This can be solved using the concept of combinations. The formula to calculate the number of combinations is[tex]:nCr = n! / r!(n-r)![/tex]Here, n = 48 and r = 4.
Number of ways = 48C4 = 194,580
Part B)Probability that X = 0:This can be calculated using the formula for the binomial distribution :
[tex]P(X = r) = nCr * p^r * q^(n-r)[/tex]
Here, p = probability of selecting contaminated bag = 12/48 = 0.25q = probability of selecting non-contaminated bag = 1-0.25 = 0.75Also, n = 4 and r = [tex]0P(X=0) = 4C0 * 0.25^0 * 0.75^4= 0.3164[/tex]
for such more questions on probability
https://brainly.com/question/13604758
#SPJ11