define pressure snd state its SI units to​

Answer:

.04 kg m/s

Explanation:

Momentum is simply mass multiplied by velocity given by p = mv. You can consider momentum as mass in motion.

Before the collision, the data given for the toy train:

v = 0.5m/s

m = 75g

We need to convert grams into the SI unit of mass, kg.

75g / 1000g * 1kg = 0.075kg

Using p = mv, we can determine:

p = 0.075kg * 0.5m/s = 0.0375 kg m/s

Rounding to the value of 1 sig-fig, it comes out to be 0.04 kg m/s.

Answer:

Answer:

The answer is Current.

Answer:

v = 3.53x10⁻³ m/s.

Explanation:

We can find the velocity of the rock by energy conservation:

[tex] \Sigma E_{i} = \Sigma E_{f} [/tex]        

[tex] \frac{1}{2}kx^{2} = \frac{1}{2}mv^{2} [/tex]

Where:

i is for initial and f is for final

k: is the stiffness of the rubber = 20 N/m

x: is the distance of the rubber compression = 5 mm = 0.005 m

m: is the mass of the stone = 40 kg

v: is the velocity =?

Hence, the velocity is:

[tex]v = \sqrt{\frac{kx^{2}}{m}} = \sqrt{\frac{20 N/m(0.005 m)^{2}}{40 kg}} = 3.53 \cdot 10^{-3} m/s[/tex]

Therefore, the velocity with which the stone leaves the catapult is 3.53x10⁻³ m/s.

I hope it helps you!  

ya ok do ok bro al ya al ya la ya al

Answer:

B. When the independent variable composed of categories and does not show a relationship to the dependent variable

Explanation:

A bar graph, is a graph used for presenting data grouped into categories, which are the independent variables of the graph, and the measurement of each category, which are represented as rectangular bars having lengths proportional to the value of the category, on a chart

In the bar graph or chart, there is no direct relationship between the categories, which are the x-values and the dependent variables , which are the length of the bars, the y-values, as the length of the rectangular bar in one category, cannot be obtained from another category through a relationship

Therefore, the correct option is option is when the independent variable composed of categories and does not show a relationship to the dependent variable

Answer:

40000 N/m²

Explanation:

Applying,

P =  F/A................... Equation 1

Where P = Pressure, F = Force, A = Area.

From the question,

The force(F) exerted by the person's foot is thesame as it's weight.

F = W = mg............ Equation 2

Where m = mass of the person, g = acceleration due to gravity.

Substitute equation 2 into equation 1

P = mg/A................ Equation 3

Given: m = 60 kg, g = 10 m/s², A = 150 cm² = (150/10000) m² = 0.015 m²

Substitute these values into equation 3

P = (60×10)/0.015

P = 600/0.015

P = 40000 N/m²

Answer:

it is maybe A but i'm not 100% sure

Explanation:

its the only one that is mixed

Answer:

B line graph

Explanation:

sorry if I am wrong

Answer:

b

Explanation:

Answer:

Water can spread germs through bacteria.

Explanation:

Bacteria can live in water and can spread to new locations when water is moved.

Answer:

I think C

Explanation:

If im right give brainliest :)

Answer:

451.13 J/kg.°C

Explanation:

Applying,

Q = cm(t₂-t₁)............... Equation 1

Where Q = Heat, c = specific heat capacity of iron, m = mass of iron, t₂= Final temperature, t₁ = initial temperature.

Make c the subject of the equation

c = Q/m(t₂-t₁).............. Equation 2

From the question,

Given: Q = 1500 J, m = 133 g = 0.113 kg, t₁ = 20 °C, t₂ = 45 °C

Substitute these values into equation 2

c = 1500/[0.133(45-20)]

c = 1500/(0.133×25)

c = 1500/3.325

c = 451.13 J/kg.°C

Option C: Later in the day, less power is developed in lifting each box

Answer:

Later in the day, less power is developed in lifting each box.

power= workdone÷time

Answer:While walking, one foot is in contact with the ground at a time. The surface area of one foot is less than two feet. Therefore, the pressure is more than the pressure exerted while standing, as the surface area of both feet is more.

Answer:

Option 1 is endothermic

Option 2 is exothermic

Explanation:

In Chemistry, Exothermic reactions are reactions whereby heat energy is transferred to the surroundings and the temperature of the surroundings increases. Endothermic reactions are those whereby heat energy from the surroundings is absorbed and thereby making the temperature of the surroundings to decrease.

This means in simple terms that endothermic reactions will have heat on the reaction side of the equation while exothermic will have heat on the product side of the equation.

Thus;

Option 1 is endothermic since it has heat absorbed on the reactant side.

Option 2 is exothermic since it gives off heat on the product side.

Answer:

The solution is neither acidic or basic,

PH < 7    acidic

PH = 7    neutral

PH > 7 basic

It is a measure of the (H+) hydronium concentration.

Answer:

my brainly answer got deleted for no reason but its velocity thats the name of speed in 1 direction

Explanation:

Answer:

Nitric acid, also known as aqua fortis and spirit of niter, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68% in water.

Explanation:

Good morning...

Nitric acid production is mainly driven by fertilizer industry. Nitric acid is used in the production of ammonium nitrate and calcium ammonium nitrate which find applications as fertilizers.

Answer:a gas at pressure of 0.8 m column of H g

Answer:

R = 4.77 ohms

Explanation:

Four resistors are given such that,

R₁ = 2 ohms

R₂ = 3 ohms

R₃ = 5 ohms

R₄ = 10 ohms

Here, R₁ and R₂ in series. The equivalent is given by :

R₁₂ = R₁ + R₂

= 2 + 5

R₁₂ = 7 ohms

Similarly, R₃ and R₄ are in series. so,

R₃₄ = R₃ + R₄

= 10+5

R₃₄ = 15 ohms

Now, R₁₂ and R₃₄ are in parallel. So,

[tex]\dfrac{1}{R}=\dfrac{1}{R_{12}}+\dfrac{1}{R_{34}}\\\\\dfrac{1}{R}=\dfrac{1}{7}+\dfrac{1}{15}\\\\R=4.77\ \Omega[/tex]

So, the equivalent resistance s 4.77 ohms.

The average velocity is 25 mph north.

Average velocity = displacement/time

Displacement =

(400 mi north) + (275 mi south)

Displacement = 125 mi north

Average V = (125 mi north) / 5 hours.

Average V = 25 mph north

Complete question:

(b) How much energy must be supplied to boil 2kg of water? providing that the specific latent heat of vaporization of water is 330 kJ/kg. The initial temperature of the water is 20 ⁰C

Answer:

The energy that must be supplied to boil the given mass of the water is 672,000 J

Explanation:

Given;

mass of water, m = 2 kg

heat of vaporization of water, L =  330 kJ/kg

initial temperature of water, t = 20 ⁰C

specific heat capacity of water, c = 4200 J/kg⁰C

Assuming no mass of the water is lost through vaporization, the energy needed to boil the given water is calculated as;

Q = mc(100 - 20)

Q = 2 x 4200 x (80)  

Q = 672,000 J

Q = 672,000 J

Q = 672,000 J

Therefore, the energy that must be supplied to boil the given mass of the water is 672,000 J

Explanation:

average speed =(first velocity + second velocity)/2

=(10 +20)/2=15m/s

distance=average speed × time

= 15 × t ( but time not given)

Answer:

Explanation:

[tex]E=\frac{q}{F}[/tex] where q is the charge of the electron and F is the electrostatic force. Filling in:

[tex]E=\frac{-1.6*10^{-19}}{9.2*10^{-15}}[/tex] which gives you an electric field magnitude of

E = -1.7 × [tex]10^{-5[/tex] C/N

Answer:

Hello There!!

Explanation:

1/2R because wire B has twice the radius,it has four times the cross-sectional area of wire A.

hope this helps,have a great day!!

~Pinky~

Answer:

HOPE IT HEPLED U !!!!

Explanation:

i think it's (C) They have different units ....

Answer:

the power output P = 1484 W

Explanation:

Power P  = Force× speed

Given that motor of a battery-powered scooter can maintain a speed of 5.3 m/s by providing a force of 280 N.

Therefore,the power output of the motor P = 280×5.3 = 1484 W

Hence, the power output P = 1484 W

Explanation:

tan(theta)=(v^2)/(length of string × g)

=(1.4^2)/(0.84 × 9.8m/s )

=1.96/(8.232)

=0.2380952381

theta=arctan(0.2380952381)

=13.4°