The transformation of liquid into solid when it reaches when it's temperature is below freezing point.
Answer:
Freezing:
When liquid is converted to solid, the process is called freezing.
Conditions for freezing:
1) Temperature must be lowered.
2) The temperature should be below 0 degree centigrade.
Example:
The conversion of "liquid water" into "ice".
=> We can use a "freezer" to freeze things.
how many nitrogen atoms are in 18.8 g of barium nitride
18.8gBa(NO3)2 》》》》gN 》》》》 2.016gN
The table describes how some substances were formed.
Substance
P.
Q
Description
Formed by boiling pure water
Formed by combining three hydrogen atoms to every nitrogen atom
Formed by adding 5 g of sugar to 1 L of water
Formed by compressing carbon under high pressure
R
S
Based on the given descriptions, which substance is most likely a mixture?
P
Q
R
S
Explanation:
Which is a pure substance?
1. soda
2. gasoline
3. salt water
4. carbon dioxide
carbon dioxide
Bromine, a liquid at room temperature, has a boiling point of 58°C and a melting point of -7.2°C. Bromine can be classified as a
1. compound.
2. impure substance.
3. mixture.
4. pure substance.
pure substance.
Answer:
the answer is
Explanation:
Sugar and water make a homogeneous mixture (the same proportions of its components throughout any given sample).
Question 4 of 20:
Select the best answer for the question
4. Which of the following is a design theory from the 1980s that uses mathematics to guide computer-aided design
O A. C-K Theory
O B. General Design Theory
O C. ASE
O D. TRIZ
general design theory
It is, general design theory introduced in 1980s that uses mathematics to guide computer - aided design. Hence, option B is correct.
What is general design theory ?A variety of new design theories were developed in the 1980s as a result of technology developments like computer-aided design (CAD). The 1981 article "General design theory and a CAD system" by Hiroyuki Yoshikawa contains one of the early references to GDT.
Yoshikawa's theory "ultimately aims at elucidating the human capacity for designing in a scientific fashion, while simultaneously producing the practical information about design technique.
Many different approaches and interpretations of design theory have been made, ranging from personal statements of design principles made by designers, to philosophical conceptions of design, to a search for a design science using advanced mathematics. Hence, option B is correct.
Find more on general design theory:
https://brainly.com/question/14165397
#SPJ7
Explain why chlorine is a gas while iodine is a solid yet both are halogens. Select one: a. Both iodine and chlorine differ in strength of metallic bonds b. Chlorine has strong inter molecular forces than iodine c. Iodine molecules are large with strong inter molecular forces than chlorine
Answer:
Chlorine has strong inter molecular forces than iodine
Explanation:
Answer:
Chlorine has strong inter molecular forces than iodine
Explanation:
I2 is a solid while Cl2 is a gas because Iodine molecules are larger and therefore experience stronger intermolecular forces.
HOPE IT HELPS :)
PLEASE MARK IT THE BRAINLIEST!
Oil and water do not mix. What can be said about oil?
It is nonpolar.
It is polar.
It is saturated.
It is unsaturated.
Answer:
It is non - polar
Explanation:
Oil is a non-polar chemical substance that is a viscous liquid at ambient temperatures and is both hydrophobic (does not mix with water).
Water and oil do not mix. They are said to be immiscible. This is because water is a polar molecule.
Hope this helps and please mark as the brainliest.
which state of matter is Na OH(s)
Explanation:
SOLID
Sodium hydroxide exists in the solid phase at room temperature. You would find it in the lab as hemispherical white solid pellets. The phase of a substance depends on temperature and pressure. As you heat a solid, it will melt and change to the liquid phase.
what are the efficient things needed for a village
Answer:
Those aspects which are something a village needs are specified beneath.
Explanation:
Things being equally necessary to make living simpler and therefore more enjoyable. The government has promised to continue providing basic facilities to either an unpopulated location, including such roads, drinkable water, as well as electric power. Therefore, throughout the village, certain things accessible with maximum variety and quality that have become the basic requirements for this human existence.5 (01.01 LC)
Which of the following would be a warning sign that information about a weight loss medication is not reliable science?
Answer:
The scientists and all test subjects involved in the investigation work for the company that sells the medication.
Explanation:
The options are as below:
A. The investigation compared a group that took the medication to a control group that did not take the medication.
B. The scientists and all test subjects involved in the investigation work for the company that sells the medication.
C. The weight loss medication worked for 95 out of the 100 test subjects, while only 15 of the 100 control subjects lost weight.
D. The weight loss results were replicated by scientists conducting a study at an independent institution
The correct option would be that the scientists and all test subjects involved in the investigation work for the company that sells the medication.
When selecting the test subjects for research, the selection must be as random as possible so as to ensure an unbiased outcome and increase the reliability of the research.
Limiting the test subjects to those that work in the company that sells the medication will generally reduce the reliability of the outcome because of element of bias that can be introduced either knowingly or unknowingly.
The test subjects must have been selected from the general population of target users for the medication and not limited to just the employees of the manufacturing company.
Correct option: B
Di- Ethyl zinc is a chemical used in the library to protect books from worms, its composition is 53% Zinc, 38.9% Carbon, and 8.1% Hydrogen (At mass of Zn=65.4, C=12, H=1). Find the empirical formula of a compound
Answer:
ZnC4H10
Explanation:
The empirical formula of a compound refers to the formula that gives the simplest whole number ratio of each atoms of the elements in the compound.
The empirical formula is calculated thus:
The given percentages in the question represent the mass in grams of each element in the compound.
Zinc= 53%, C= 38.9%, H= 8.1% which represents 53g, 38.9g and 8.1g of each element respectively.
Molar Mass of Zn= 65.4 g/mol
Molar Mass of C= 12 g/mol
Molar Mass of H= 1 g/mol
Step 1: Divide the mass of each element by the molar mass given to convert to moles:
Zn= 53/65.4 = 0.81moles
C= 38.9/12 = 3.24moles
H= 8.1/1 = 8.1moles
Step 2: Divide each mole value by the smallest number of moles calculated, which is 0.81moles:
Zn= 0.81/0.81 = 1
C= 3.24/0.81 = 4
H= 8.1/0.81= 10
This is the mole ratio represented in the subscript of each element in the empirical formula:
That is, Zn (1) C (4) H (10)
Empirical formula= ZnC4H10
Consider the hypothetical chemical reaction represented by the equation 3 A + 2 B → A 3B 2 Which of the following is a correct interpretation of this equation? i. 3 grams of A react with 2 grams of B to form 1 gram of A 3B 2 ii. 3 atoms of A react with 2 atoms of B to form 1 molecule of A 3B 2 iii. 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2
Answer:
iii. 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2
Explanation:
A + 2 B → A 3B 2
A chemical equation among other things, gives the stoichiometry of the reaction; that is the relationship between reactants and products.
This relationship is basically stated in moles form the coefficients of the reactants and product.
From the reaction above, we can say;
1 mol of A reacts with 2 mol of B to form 1 mol of A3B2
It cannot be grams because the reactants and products all have different molar masses.
The correct interpretation of the equation of the hypothetical chemical reaction is; Choice (iii) 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2.
Definition:
Chemical equations are equations that make use of chemical formulae and symbols to represent chemical reactions. The left-hand side of a chemical equation represents the reactants and the right-hand side represents the products.
Each reacting entity is also assigned its corresponding stoichiometric coefficient.
However, this stoichiometric coefficient is to quantify the no. of moles of the reactants consumed or products formed as the case may be.
Read more:
https://brainly.com/question/12271256
Sulphur dioxide is a common pollutant from burning coal.State two effects caused by this pollutant and also write the chemical equation.
Heya!
Sulfur dioxide - ( SO2 )
Answer:
Sulfur dioxide is a common pollutant caused due to the burning of coal,Is very harmful for the environment and health.Effects:
Health effects-Sulfur dioxide effects the respiratory system which includes the functioning of lungs,respiratory track and causes infections,can also effect and irritate the eyes and causes aggravating conditions such as asthma and chronic bronchitis.As most sulfur dioxide air pollution comes from the burning of coal and oil in power plants. It is a emitted by trains, large ships and other diesel objects that burns alota sulfur fuel so this also effects the environment like plants and others as the air lacks oxygen ,but with more sulfur dioxide.Hope this helps!
Have a nice day!:)
how scientific inferences can be made from scientific observations
Answer:
The scientific method is applied to inference through the steps taken to make both inductive and deductive inferences. Inductive inference begins with an observation, and then a pattern of such observation develops. One then makes a hypothesis based on the pattern and finally a theory based on the hypothesis
Hope it helps!
Mark it as Brainliest!!
Three determinations were made of the following percentage of oxygen in mercuric oxide. The results were 7.40%, 7.43%, and 7.35%. What was the average percentage?
In the laboratory, a volume of 100 mL of sulfuric acid (H2SO4) is recorded. How many g are there of the liquid if its density is 1.83 g / cm3?
Answer:
[tex]\large \boxed{\text{183 g}}[/tex]
Explanation:
[tex]\begin{array}{rcl}\text{Density} & = & \dfrac{\text{Mass}}{\text{Volume}}\\\\\rho & = &\dfrac{m}{V}\\\\1.83 \text{ g$\cdot$ cm}^{-3} & = & \dfrac{m}{\text{100 cm}^{3}}\\\\m & = & \text{183 g}\\\end{array}\\\text{There are $\large \boxed{\textbf{183 g}}$ of sulfuric acid.}[/tex]
c. CaCl2 can be melted to produce calcium metal and give off chlorine gas. The equation for this
is CaCl2()→ Ca(s) + Cl2(g). If 277.45 g CaCl2 were melted, how many grams of Ca(s) would
be formed? (10 points)
HELP MEEEEE PLEASE
Answer:
Total gram of Ca = 99.26 g
Explanation:
Given:
Mass of CaCl₂ = 277.45 g
Find:
Mass of Ca
Computation:
Ca = 40 g/mol
Cl₂ = 2 (35.5) g/mol = 71 g/mol
Total CaCl₂ = 111 g/mol
Total gram of Ca = [40 / 111] 277.45 g
Total gram of Ca = 99.26 g
In the image above the ruler is measuring in centimeters. The blue cylinder falls somewhere between 2.7cm and 2.8cm according to the ruler. Since we can estimate the last digit I would say that the length of the cylinder is 2.76cm. Since I am estimating any number 2.72cm or 2.78cm could also be correct.
Why would 2.755 not be a correct measurement according to estimating the last digit?
Answer:
The answer is below
Explanation:
Resolution is the smallest unit of measurement that can be measured by a measuring instrument. Each point on the ruler is 0.1 cm and the difference between any two points, about 0.01 cm cam be measured. The minimum measurement (resolution) that can be measured by the ruler is 0.01 cm (two decimals), therefore it cannot measure up to three decimal places such as numbers like 2.755.
What is the molarity of a 50.0ml aqueous solution containing 10.0 grams of hydrogen peroxide H2O2
Molarity= No of moles of solute * 1000 / vol solution in ml
No of moles= Given mass / Molar mass
Given Mass of solute (H2O2)= 10g
Molar mass of H2O2=34gmol^-1
No of moles= 10/34= 0.294 moles
Volume of solution=50ml
Molarity = 0.294*1000 / 50
Molarity = 5.8M
what’s the answer to this?
what is the correct electron configuration for an element with five electrons in the third energy level
[tex]1s^2 2s^2 2p^6 3s^2 3p^3[/tex] is the correct electron configuration for an element with five electrons in the third energy level.
What are elements?Elements are the simplest substances which cannot be broken down using chemical methods.
The shell nearest to the nucleus, 1n, can carry two electrons, while the next shell, 2n, can carry eight, and the third shell, 3n, can carry up to eighteen.
The third shell carries 18 electrons; 2 in a 3s orbital; 6 in three 3p orbitals; and 10 in five 3d orbitals. The fourth shell carries 32 electrons; 2 in a 4s orbital; 6 in three 4p orbitals; 10 in five 4d orbitals; and 14 in seven 4f orbitals.
The element would be phosphorus. Its electron configuration is [tex]1s^2 2s^2 2p^6 3s^2 3p^3[/tex]
Learn more about elements here:
brainly.com/question/1896898
#SPJ2
Write down the dissolution equation for nickel(II) perchlorate dissolving in water. (Perchlorate is a polyatomic ion with the formula ClO41-.) If four moles of the ionic compound are dissolved, then how many moles of the ANION are present in the solution?
Answer:
Ni(ClO₄)₂(aq) ⇒ Ni²⁺(aq) + 2 ClO₄⁻(aq)
8 mol ClO₄⁻
Explanation:
Let's consider the dissolution equation for nickel(II) perchlorate dissolving in water.
Ni(ClO₄)₂(aq) ⇒ Ni²⁺(aq) + 2 ClO₄⁻(aq)
The molar ratio of Ni(ClO₄)₂ to ClO₄⁻ is 1:2. If 4 moles of Ni(ClO₄)₂ are dissolved, the moles of ClO₄⁻ formed are:
4 mol Ni(ClO₄)₂ × (2 mol ClO₄⁻/ 1 mol Ni(ClO₄)₂) = 8 mol ClO₄⁻
You are pushing a box with 20 N of force that has
a mass of 10 kg, solve for acceleration
Answer:
Force=mass ×acceleration.
20=10×acceleration.
20=10a.
a=2m/s^2.
The primary function of a scuba regulator is to: Reduce high-pressure gas in the scuba cylinder to a more breathable intermediate pressure. Reduce high-pressure gas in the scuba cylinder to ambient (surrounding) pressure. Provide a diver with a continuous flow of oxygenated air. None of the above.
Answer:
Reduce high-pressure gas in the scuba cylinder to ambient (surrounding) pressure.
Explanation:
The primary function of a scuba regulator would be to reduce high-pressure gas in the scuba cylinder to ambient pressure.
A scuba regulator is a structure found attached to the scuba cylinder usually carried by scuba divers. The structure regulates the pressure of the breathing gas in the cylinder to a safe level before the gas becomes available for the breathing process of divers.
Usually, the gas in a scuba cylinder is at a high level. Hence, what the regulator does is to bring it down to a level that would be safe for the breathing of the diver.
The melting points of ionic compounds _____
Explanation:
ionic compounds have high melting points
Iron and aluminum are examples of
Answer:
Iron and aluminum are both examples of metals that are used commonly in everyday life.
Mike wants to galvanize iron to protect it from rusting. Which metal should he use?
A
platinum
B.
aluminum
C.
copper
D.
zinc
E.
tungsten
Answer:
D. Zinc.
Explanation:
Galvanization is a metal-coating process which involves the application of a thin layer of zinc to an iron or steel, so as to prevent rusting or corrosion.
The zinc metal protects the iron from rusting by sealing the surface of the iron and thus, preventing weathering and oxidation.
Hence, if Mike wants to galvanize iron to protect it from rusting. The metal he should use is zinc (Zn) because a coating of zinc would protect the iron (Fe) by corroding first when exposed to moisture or the atmosphere.
Answer:
b
Explanation:
PLZ HELP! TIMED TEST Which of the following groups of elements are likely to have elements in the three states of matter? (1 point)
Alkali metals
Actinides
Halogens
Lanthanides
Answer:
Halogens
Explanation:
Matter is defined as a substance which has mass and occupies volume. The three states of matter are solid, liquid and gas.
Elements which are present in group 17 are known as halogens.
Elements present in this group are fluorine, chlorine, bromine and iodine.
At room temperature, both fluorine and chlorine exists as a gas.
Bromine exists as a liquid and iodine exists as a solid.
Therefore, we can conclude that halogen groups are likely to have elements in three states of matter.
How does antifreeze rely on colligative properties to work?
A. It causes the vapor pressure to increase and the increased outward pressure of the gasoline vapors prevents it from solidifying into ice.
B. It causes freezing point elevation which raises the temperature of the gasoline without letting it freeze.
C. It causes freezing point depression which requires the gasoline to reach a much lower temperature before freezing.
D. It causing boiling point elevation, which raises the temperature of the gasoline without letting it boil so that it can resist the cold.
WILL GIVE BRAINLIEST FOR CORRECT!!!
It causes freezing point depression which requires the gasoline to reach a much lower temperature before freezing. Hence, option C is correct.
What is the freezing point?Whenever a solute is added to a solution/solvent, it leads to depression in the freezing point of that solution/solvent. Depression in the freezing point of a solution on the addition of a solute is a colligative property.
A colligative property is a physical property which depends upon the number of solutes added not on the nature of solutes which means it does not matter whether we are adding 1000 particles of sugar or salt in water, the depression in the freezing point will occur by the same °C. Also, the more a solute is added the more will be the depression at the freezing point.
The formula for depression at the freezing point is mentioned as under:
Δ T = K x m
where Δ T = freezing point depression;
K = cryoscopic constant;
m = molality of the solution.
For example, The freezing point of water is 0 °C but as soon as we add a 92 gm solute like NaCl (common salt) in 1000 gm of water, its freezing point will be lower to −3.72 °C.
Hence, option C is correct.
Learn more about freezing point here:
https://brainly.com/question/12940710
#SPJ5
3. why are fire tornadoes rare ?
Which scientist developed a new model of planetary motion?
Answer: Johannes Kepler
Answer:
i believe the answer us kepler
Explanation:
A substance is followed by the symbol (I) in a chemical Equation. What does the symbol Represent
Answer:
Iodine
Explanation:
Hope this helps. Think about me, when giving out brainiest.
