Define Circular motion and its types !​

Answer:

At sea level

Explanation:

Because there is higher air pressure

Answer:

Metals (like copper and aluminium) are good conductors of heat and electricity, while nonmetals (such as phosphorus and sulfur) are insulators.

Explanation:

i don't really have one i just know

Answer:

1 of them is metel and one is not

Explanation:

Answer:

The temperature of the gas is 350.02 K.

Explanation:

The average speed is related to the temperature as follows:

[tex] \bar v = \sqrt{\frac{3RT}{M}} [/tex]   (1)

Where:

[tex] \bar v [/tex]: is the average speed = 1477 m/s

R: is the gas constant = 8.31 J/(K*mol)                                                  

T. is the temperature =?

M: is the molar mass

First, let's find the molar mass:

[tex] M = \frac{m}{n} [/tex]

Where:

m: is the mass of the gas = 0.008 kg

n: is the number of moles = 2 mol

[tex] M = \frac{m}{n} = \frac{0.008 kg}{2 mol} = 0.004 kg/mol [/tex]

Hence, by solving equation (1) fot T we have:

[tex] T = \frac{\bar v^{2}*M}{3R} = \frac{(1477 m/s)^{2}*0.004 kg/mol}{3*8.31 J/(K*mol)} = 350.02 K [/tex]

Therefore, the temperature of the gas is 350.02 K.

I hope it helps you!            

Answer:

The retina is the light sensitive focusing screen. Inside, there's two types of fluid, one watery behind the lens, and further back, a thicker one that helps the eyeball hold its shape.

Answer:

The retina is the light sensitive focusing screen.

hope this helps <3

A variable, as its name implies, is something that can change, ideally, as the scientists and engineers want to.

Particularly we care for the independent variables, which are the ones we can control and affect the dependent variables, which are the outcomes we study.

For a quick example, think of an experiment where you heat something on an oven. The temperature of the oven can be set by the scientist, so the temperature is an independent variable because they can control it.

Now let's see the given experiment.

The team is testing the speed of the toy car.

remember that:

distance/time = speed.

We know that in the first trial, they test how long takes the car to travel 2 meters.

Now, what we can change for the second trial, knowing that the speed is the output that we are studying?

The answer is trivial, the only thing we can change in the given setup is the distance that the car travels, so in the next trial we should change the variable "distance travelled by the car" and see if it affects the output "speed of the car".

If you want to learn more about variables, you can read:

https://brainly.com/question/19585043

Answer:

Work done is 5 J

Explanation:

Workdone = Force × distance

[tex]{ \sf{W = 100 \times (5 \times {10}^{ - 2}) }} \\ { \sf{W = 5 \: joules}}[/tex]

Answer:

Explanation:

The gravitational force between the earth and another body is F = -GM_em/r^2 r where G = 6.67 times 10^-11 Nm^2/kg^2 is the gravitational constant, M_e = 5.97 times 10^24 kg is the mass of the earth, m is the mass of the other body, and r is the position vector of the second body with respect to the centre of the earth.

Answer:

A

Explanation:

a_c = v^2/r

v = sqrt*a_c × r*

v = sqrt * 18 × 9*

v = 9×sqrt *2*

v = 12. 7 m/s

Answer:

Choose B

Explanation:

Hope Can I help you

Answer:

D. [tex]^{39}_{18} Ar[/tex]

Explanation:

The given nuclear equation is the beta decay of chorine in which an electron, known as a beta particle, is given off from within the nucleus due to the breakdown of a neutron within the nucleus into a proton and a beta particle, such that the atomic number is increased by 1 from 17 to 18, which is the atomic number or argon, Ar, as follows;

[tex]^{39}_{17}Cl \ \rightarrow \ ^0_{-1} e + \ ^{39}_{18} Ar[/tex]

Answer:

The reason you feel weightless is because there is no force pushing against you, since you are not in contact with anything. Gravity is pulling equally on all the particles in your body. This creates a sensation where no forces are acting on you and you feel weightless.

Answer:

a)  [tex]n=5.98*10^{26}/m^3[/tex]

b)  [tex]i=2010000A/m^2[/tex]

c)  [tex]I_w=14.207A[/tex]

d)  [tex]V_e=1.92*10^{-4}m/s[/tex]

Explanation:

From the question we are told that:

Diameter [tex]d=3mm=>3*10^{-3}[/tex]

Conductivity [tex]\sigma= 6.7 10^7 (0.M),[/tex]

Electron mobility [tex]\phi= 0.0064 m2 /V sec[/tex]

Electric field [tex]E= 30 mV/m[/tex]

a)

Generally the equation for Charge Density is mathematically given by

[tex]\phi=\frac{\sigma}{n e}[/tex]

Therefore

[tex]n=\frac{\sigma}{\phi e}[/tex]

[tex]n=\frac{6.7 10^7}{1.6*10^{-19} *0.0064}[/tex]

[tex]n=5.98*10^{26}/m^3[/tex]

b)

Generally the equation for current density is mathematically given by

[tex]i=\sigma*E[/tex]

[tex]i= 30*10^{-3] *6.7 10^7[/tex]

[tex]i=2010000A/m^2[/tex]

c)

Generally the equation for current in wire is mathematically given by

[tex]I_w=iA[/tex]

[tex]I_w=i*\pi r^2[/tex]

[tex]I_w=(2010000)*\pi( 1.5*10^{-3})^2[/tex]

[tex]I_w=14.207A[/tex]

d)

Generally the equation for electron draft velocity. is mathematically given by

[tex]V_e=\phi E[/tex]

[tex]V_e=(0.0064)*(30*10^{-3})[/tex]

[tex]V_e=1.92*10^{-4}m/s[/tex]

Answer:

false...............

Answer:

False A beginners should start from shorter ones to long work sessions

Explanation:

Hope it helps

Mark me as Brainliest plz!!

:DD

Answer:

The northern lights come from the interaction of electrically charged particles given off by the Sun surface during solar storms and the Earth's magnetic field which is pointed in the northern to southern poles of the Earth. Therefore, the charged particles that travel through millions of miles from the Sun to the Earth accelerate towards the magnetic poles and appear as the northern (and southern) lights

Boreal is an adjective word for the north or northern regions. In the southern latitudes, in the southern hemisphere, the phenomenon is called aurora australis (australis is the adjective for 'of the south')

Explanation:

Answer:

The three primaryfactors of evaporation are heat, atmospheric pressure (which determines the percentage of moisture) and the movementofair. At the molecular level, there is no strict boundary between the liquid state and the vapor state

Answer:

c) sin c /sin d

because light is moving from denser to shallower medium

b) refraction of light

Explanation:

Answer:

The field strength needed to produce a 24.0 V peak emf is 0.5913 T

Explanation:

From the formula for maximum emf of a generator,

[tex]emf_{max}= NAB\omega[/tex]

∴ [tex]B = \frac{emf_{max} }{NA\omega}[/tex]

Where N is the number of loops

A is cross section of loops

B is magnetic field strength

ω is the angular frequency of loops

From the question, [tex]emf_{max} = 24.0V[/tex]

N = 300 turns

A = l × b ( since it is a rectangular coil)

A = 6.46 cm × 5.00 cm

A = 0.0646 m × 0.05 m

A = 0.00323 m²

ω = 400 rpm = (400/60)×2π rad/s

ω = 41.8879 rad/s

Putting all the parameters into the formula

[tex]B = \frac{emf_{max} }{NA\omega}[/tex]

[tex]B = \frac{24.0}{300\times0.00323\times41.8879}[/tex]

[tex]B = 0.5913T[/tex]

Hence, the field strength needed to produce a 24.0 V peak emf is 0.5913 T

the machine shown in the diagram is called a tramp.

the height of the tramp is 5 and the length is 12

Answer:

Incline plane

5/12 rise/run

Explanation:

Incline plane

5/12 rise/run

Explanation:

the force acting perpendicularly on unit area of surface

A pressure of one Newton per square meter .. The SI unit of 1 Pascal pressure is 1 Newton per square metre .

Answer:

The most accurate and precise method to measure the thickness of a coin would be by a micrometer screw guage.

The most accurate and precise method to measure the thickness of a coin is with the help of a screw gauge.

A unit of measurement is a specified magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind.

It is determined by convention or regulation.

Any additional quantity of that type can be stated as a multiple of the measurement unit.

The smallest length that a screw gauge can measure is called its least count.

Thus, if we have to measure the thickness of a coin using a screw gauge to measure a coin is the most exact and precise approach available.

Learn more about the unit of measurement here, refer to the link given below;

brainly.com/question/12629581

#SPJ2

After 1 hour, 80 g decays to 40 g.

After another hour (total 2 hours), 40 g decays to 20 g.

After another hour (total 3), 20 g decays to 10 g.

After one more hour (total 4), 10 g decays to (D) 5 g.

That's a parallel circuit. (B)

When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice:  Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.

A circuit that has any "decision" points in it is a parallel circuit.  What happens in the real world is:  The current splits up.  Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.

A series circuit is one in which there's only one possible path all the way around.  There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.

An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it.  It's like a railroad where a big piece is cut out of the track somewhere.  So no trains can travel on that route, and there's no current flowing anywhere in the circuit.

I'm not so sure about a "combination" circuit.  I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts.  Personally, I'd call that a "series-parallel" circuit.  But it really doesn't matter right now.  Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.

Answer:

B. Parallel Circuits

Explanation:

A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.

hope i helped

Answer:

b. the seasons

Explanation:

Answer:

im pretty sure that it's (A.) High current

Explanation:

pf

not 100% sure, tho

Answer:

Velocity= 3[tex]ms^{-1}[/tex]

Explanation:

Formula to find velocity = Displacement/time taken

therefore, velocity= 15/5 ➤ Velocity = 3 [tex]ms^{-1}[/tex]

Answer:

Copper isn't ferromagnetic,

Aluminum isn't ferromagnetic,

String has a ferromagnetic property

So in conclusion:

The answer is strings :)

Answer:

The answer is "4.97 m".

Explanation:

[tex]u = 1.23\ \frac{m}{s}\\\\[/tex]

[tex]H= 1.45 \ m\\\\[/tex]

[tex]\mu = 0.231\\\\[/tex]

The law of conservation tells us that heat energy at the top with kinetic energy at the top equals kinetic energy at the base.

[tex]mgh+\frac{1}{2}mu^2=\frac{1}{2}mv^2\\\\2gh +u^2 =v^2\\\\v=\sqrt{u^2+2gh}[/tex]

[tex]v=\sqrt{(1.23\ \frac{m}{s})^2+2(9.81 \frac{m}{s^2}) +(1.45\ m)[/tex]

   [tex]=\sqrt{1.5129+19.62 +1.45}\\\\=\sqrt{22.5829}\\\\=4.75\ \frac{m}{s}[/tex]

Friction force is given by the formula

[tex]f=-\mu mg \\\\ma= -\mu mg\\\\a=-\mu g\\\\[/tex]

[tex]= -(0.231) \ (9.81\ \frac{m}{s^2})\\\\=-2.26611 \ \frac{m}{s^2}[/tex]

Now by using an equation of motion as

[tex]v^2-u^2= 2as[/tex]

From the above the distance traveled is

[tex]S=\frac{v^2-u^2}{2a}[/tex]

[tex]S=\frac{(0)^2-(4.75\ \frac{m}{s})^2}{2(-2.26611\ \frac{m}{s^2})}\\\\[/tex]

   [tex]=\frac{-(4.75\ \frac{m}{s})^2}{2(-2.26611\ \frac{m}{s^2})}\\\\=\frac{-22.5625}{-4.53222}\\\\=4.97[/tex]

In other words, the distance from the bottom of the chute to the point where the toy zebra comes to rest is [tex]s = 4.97\ m[/tex]

Answer:

I HOPE IT WILL HELP YOU.

:D

Answer:

One standard kilogram is define as the mass of platinium iridium cylinder having equal diameter and height kept at the particular condition of international bureo of weigh and measure sevre near paris.