Consider the following thermochemical equation: C(s) + O2(g) → CO2(g) ΔH = −393 kJ CO(g) + ½O2(g) → CO2(g) ΔH = −294 kJ What is the enthalpy change for the following related thermochemical equation C(s) + ½O2(g) → CO(g) Group of answer choices a. −687 kJ b. –99 kJ c. +99 kJ d. +687 kJ

The pH of the given solution has to be calculated when titrating 50.0 ml of 0.220 M HClO (aq) with 0.220 M KOH (aq) before the addition of any KOH will be 13.34.

To determine the pH of solution, we need to first determine the ionization constant of HClO (aq).

Ka = [H₃O⁺] [ClO⁻]/[HClO]

Let's write down the acid dissociation reaction of HClO (aq).

HClO (aq) + H₂O (l) → H₃O⁺(aq) + ClO⁻(aq) (Ka = 3.5 times 10⁻⁸)

Initial concentration: [HClO] = 0.220m

[H₃O⁺] = x

[ClO⁻] = x

At equilibrium, Ka = (x)(x)/(0.220 - x)

3.5 times 10⁻⁸ = x²/(0.220 - x)

Since the concentration of x in denominator is much smaller than the initial concentration, we can consider that as 0.220

0.220 - x.x = 4.69 times 10⁻⁴m

The concentration of H⁺ ions is equal to the concentration of H₃O⁺ ions. Thus, [x]small

[H₃O⁺] = 4.69 times 10⁻⁴m

pH = -log [H₃O⁺] = -log (4.69 times 10⁻⁴) = 3.33

The pH of the solution before adding any KOH is 3.33. Calculate pH after each addition of KOH. After adding 50.0 ml of 0.220 M KOH (aq), the concentration of HClO (aq) will become zero. We will have KOH (aq) remaining in the solution. Thus, we will have to calculate the pH of a strong base. The stoichiometry of the reaction will be 1:1 because both HClO (aq) and KOH (aq) are monoprotic acids and bases respectively. We have to calculate the number of moles of KOH (aq) added. The number of moles of KOH (aq) will be,

n = MV

Where, M is the molarity of KOH (aq) and V is the volume of KOH (aq) added. n = (0.220m) (50.0ml/1000) = 0.011mol

The amount of KOH (aq) is equal to the amount of OH⁻ ions.

[OH⁻] = 0.011mol (0.050L) = 0.22M

pOH = - log [OH⁻] = - log (0.22) = 0.6575

pH = 14 - pOH = 14 - 0.6575 = 13.34

The pH of the solution is 13.34.

Learn more about pH here:

https://brainly.com/question/15289741

#SPJ11

The density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.

The density of a gas can be calculated using the following formula:

Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)

Where, Density is the density of the gas in grams per liter. Pressure is the pressure of the gas in millimeters of mercury (mm Hg). Molar mass is the molar mass of the gas in grams per mole. Gas constant is the universal gas constant (0.08206 L atm / mole K). Temperature is the temperature of the gas in kelvin (K).

Now, let's find the density of the gas at 34° C and 745 mm Hg. The temperature should be converted from Celsius to Kelvin. Temperature (K) = 34 + 273 = 307 K

Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)

Density = (745 x Molar Mass) / (0.08206 x 307)

Density = 28.91 x Molar Mass g/L

Also, we need to find the molar mass of the gas. Since we don't know which gas it is, we'll use the formula,

Molar Mass = Density x (Gas Constant x Temperature) / Pressure

Molar Mass = 1.87 x (0.08206 x 307) / 745

Molar Mass = 0.103 g/mol

Now, we can find the density of the gas at 84° C and 721 mm Hg.

Temperature (K) = 84 + 273 = 357 K

Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)

Density = (721 x 0.103) / (0.08206 x 357)

Density = 2.50 g/L

Therefore, the density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.

To know more about density, refer here:

https://brainly.com/question/12022043#

#SPJ11

D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.

Answer:

Diborane, B2H6, is a useful reagent in organic chemistry. One of the several ways it can be prepared is by the following reaction 2 NaBH4(aq) H2SO4(aq) 2 H2 (g) + Na2SO4(aq) + B2H6(g) What volume of 0.0915 M H2SO4, in milliliters, should be used to consume completely 1.35 g of NaBH4? mL 200 What mass of B2H6 can be obtained? 0.51

Explanation:

hope its help

The process of distillation involves heating the alcohol-containing solution, gathering the vapours, and then condensing them back into liquid form.

According to their boiling points, liquids are separated and purified using the distillation process. When it comes to alcohol, the solution is heated until the alcohol evaporates into a vapour, which is then collected and condensed back into a liquid state. A highly concentrated alcohol solution is produced as a result of this procedure, which enables the separation of the alcohol from other elements in the solution.

Alcoholic drinks including whisky, vodka, gin, and rum are made by distillation.

In the chemical industry, distillation is used to separate and purify various compounds and solvents.

In the process of refining petroleum, distillation is used to separate crude oil into several products, including gasoline, diesel, and kerosene.

Learn more about Distillation here:

brainly.com/question/29037176

#SPJ4

According to the given options, option "II only" will increase the pH of an H2CO3/HCO+3 buffer solution.

Buffer solution- A buffer solution is a solution that resists changes in pH when small amounts of an acid or a base are added to it.

H2CO3/HCO+3 buffer- A buffer that consists of a weak acid and its conjugate base is known as an acid-buffer or a weak acid-buffer. For example, carbonic acid (H2CO3) and bicarbonate (HCO3−) are combined in a buffer solution that has a weak acid (H2CO3) and its conjugate base (HCO3−). Carbonic acid (H2CO3) and bicarbonate (HCO3−) are combined in a buffer solution that has a weak acid (H2CO3) and its conjugate base (HCO3−).

The chemical equation for the carbonic acid-bicarbonate buffer is:

H2CO3 ⇌ H+ + HCO3−

This reaction shows that the buffer solution contains both carbonic acid (H2CO3) and bicarbonate (HCO3−) ions. H+ and HCO3− ions are formed when carbonic acid (H2CO3) dissociates in water (H2O).

Increasing the pH of a buffer solution- The pH of a buffer solution can be increased by adding a strong base, which would react with the buffer's weak acid to form its conjugate base. In this scenario, sodium bicarbonate (NaHCO3) is a strong base.

Therefore, option "II only" is the correct answer.

To learn more about "buffer solution", visit: https://brainly.com/question/8676275

#SPJ11

The constant current is 0.0406 A for the  nickel anode in an electrolytic cell decreases in mass by 1.20 g in 35.5 min. the oxidation half-reaction converts nickel atoms to nickel(ii) ions.

In an electrolytic cell, the oxidation half-reaction converts nickel atoms to nickel (II) ions, and the nickel anode in an electrolytic cell decreases in mass by 1.20 g in 35.5 min.

To determine the constant current, we can use Faraday's laws. Faraday's laws were established by Michael Faraday, a British scientist, in the early 19th century. His laws explain how much mass will be lost or gained at an electrode during electrolysis and how much electrical energy is required. Faraday's first law states that the mass of a substance deposited during electrolysis is proportional to the number of electrons that pass through the electrolyte.

The following formula can be used to calculate the constant current:

I = (nF / t) × (m / M)

where, I = Constant Current (in amperes), n = number of moles of electrons transferred, F = Faraday constant (96500 C/mol), t = Time taken, m = mass of substance (in grams), M = Molar mass of the substance (in grams/mol)

The Faraday constant is the amount of charge that must pass through an electrode to deposit or liberate 1 mole of any substance. For nickel, the molar mass is 58.69 g/mol, and the oxidation state is +2, which means that two electrons are lost per nickel atom. Thus, n = 2.

To calculate the current, we must first find the number of moles of nickel atoms lost during electrolysis. The formula for the number of moles is:

n = m / M

n = 1.20 g / 58.69 g/mol

n = 0.0204 mol.

Now we can use the formula above to calculate the current:

I = (nF / t) × (m / M)

I = (2 × 96500 C/mol / 2130 seconds) × (1.20 g / 58.69 g/mol)

I = 0.0406 A

I = 40.6 mA or 0.0406 A.

Therefore, the constant current is 40.6 mA or 0.0406 A.

Read more about current here:

https://brainly.com/question/12815553

#SPJ11

The reaction of hydrogen gas and oxygen gas to produce water is an exothermic reaction because more energy is released in the formation of the products than is needed to break the bonds of the reactants.

In other words, more energy is released when the hydrogen and oxygen molecules combine to form water molecules than is needed to break the bonds between the hydrogen and oxygen molecules.

Exothermic reaction- It is a type of reaction in which the two atoms react with each other to form a stable compound and release energy in the process of doing so.

To learn more about "reaction", visit: https://brainly.com/question/11231920

#SPJ11

The molar mass of the antibiotic is 42,308 g/mol.

The osmotic pressure of a solution is given by the equation:

π = MRT

where π is the osmotic pressure, M is the molarity of the solution, R is the gas constant, and T is the temperature in Kelvin.

We can rearrange this equation to solve for the molarity of the solution:

M = π / RT

First, let's convert the temperature to Kelvin:

23.6°C + 273.15 = 296.75 K

Now we can plug in the values:

M = (8.34 mm Hg) / (62.3637 Ltorr/molK * 296.75 K)

M = 1.16 x [tex]10^{-5}[/tex] M

To find the molar mass of the antibiotic, we need to use the formula:

M = m / (n * MM)

where m is the mass of the antibiotic (in grams), n is the number of moles of the antibiotic, and MM is the molar mass of the antibiotic (in g/mol).

We can rearrange this equation to solve for MM:

MM = m / (n * M)

To find n, we can use the formula:

n = M * V

where V is the volume of the solution (in liters).

V = 500.0 mL / 1000 mL/L = 0.500 L

n = (1.16 x [tex]10^{-5}[/tex] M) * (0.500 L) = 5.8 x [tex]10^{-6}[/tex] moles

Now we can plug in the values to find MM:

MM = (0.302 g) / (5.8 x [tex]10^{-6}[/tex] moles * 1.16 x [tex]10^{-5}[/tex] M)

MM = 42,308 g/mol

Therefore, the molar mass of the antibiotic is 42,308 g/mol.

To know more about antibiotic click here:

brainly.com/question/10868637

#SPJ4

The pH of a solution prepared from 0.201 mol/L of NH4CN and enough water to make 1.00 L of solution is 4.24.

To calculate the pH of this solution, you first need to calculate the concentration of H+ ions in the solution. You can do this by using the following equation:

H+ (mol/L) = [NH4CN]2 x 10-10

Using the given information, the concentration of H+ ions in the solution is:

H+ (mol/L) = [0.201 mol/L]2 x 10-10 = 4.04 x 10-5 mol/L

You can then calculate the pH of the solution using the following equation:

pH = -log10(H+)

Using the concentration of H+ ions, the pH of the solution is:

pH = -log10(4.04 x 10-5) = 4.24

Therefore, the pH of a solution prepared from 0.201 mol/L of NH4CN and enough water to make 1.00 L of solution is 4.24.

Learn more about pH: https://brainly.com/question/26424076

#SPJ11

The percent error of your experimentally determined density is that is an error of 2.53%.

It can be calculated using the following equation:  Error % = (Experimentally Determined Value - Known Value)/Known Value x 100. So in your case, the equation would look like: Error % = (2.03 g/l - 1.98 g/l)/1.98 g/l x 100

This gives us an error of 2.53%.
The given value of density of CO2 is 2.03 g/L and the actual value of density of CO2 is 1.98 g/L. The percent error can be calculated using the below formula: Percent error = (|experimental value - actual value|/actual value) × 100Therefore, the percent error of experimentally determined density is Percent error = (|2.03 g/L - 1.98 g/L|/1.98 g/L) × 100= (0.05 g/L/1.98 g/L) × 100= 2.53%Thus, the percent error of the experimentally determined density is 2.53%.

Read more about density:

https://brainly.com/question/1354972

#SPJ11

The hydrocarbon that has all of its atoms in the same plane is C2H4. The correct answer is option: C .

This is because C2H4 has a planar structure due to its sp2 hybridization of carbon atoms, which allows the molecule to have a trigonal planar geometry. In contrast, C2H6, also known as ethane, has a tetrahedral shape due to the sp3 hybridization of its carbon atoms, which results in the atoms not being in the same plane. CH4, it has a similar tetrahedral shape for the same reason. C3H4, also known as propyne, has a linear shape due to the triple bond between the carbon atoms, but the atoms are not all in the same plane. Option C is correct.

To know more about hydrocarbon, here

brainly.com/question/17578846

#SPJ4

There are 4 chirality centers in an aldohexose. The correct answer is option b.

Aldohexoses are six-carbon monosaccharides with a carbonyl functional group (aldehyde group) and five other carbon atoms, each of which is associated with an alcohol functional group in their straight-chain form. The carbonyl carbon, which is referred to as the anomeric carbon, determines the stereochemistry and the cyclic form of aldohexoses.

Chirality centers are carbon atoms that have four distinct substituents bonded to them, resulting in the ability to exist as stereoisomers. These stereoisomers are mirror images of each other and cannot be superimposed upon each other.Therefore, it is important to count the number of chirality centers present in the aldohexose structure.

There are four chirality centers in aldohexose, which are present at carbon atoms 2, 3, 4, and 5.

For more such questions on chirality centers, click on:

https://brainly.com/question/9522537

#SPJ11

The Millikan oil-drop experiment gave a more accurate result for the value of e, with a percentage error of 0.002%. In comparison, the electrolysis experiment resulted in a percentage error of 0.06%.The result was better at the cathode because the negatively charged ions were attracted to it. Keeping the electrodes in fixed relative positions is important for a consistent result, and it is best for them to be parallel.

1. Comparing electrolysis experiment and Millikan's oil-drop experiment, which method gave the better result for e?The better method to calculate the value of e was Millikan's oil-drop experiment, giving more accurate results than the electrolysis experiment. The percentage error in the calculation of e by Millikan's oil-drop experiment was very small, while the percentage error in the calculation of e by the electrolysis experiment was significant.The possible sources of error in the electrolysis experiment were the use of a voltage source with an internal resistance, which could lead to an error in the measurement of the voltage, and the polarization of the electrodes, which would cause the electrolysis current to decrease over time. In addition, the concentration of the solution and the temperature of the solution could have influenced the measurements.  The sources of error in Millikan's experiment were errors in the measurement of the radius and mass of the oil drops, air turbulence affecting the motion of the oil drops, and inconsistencies in the voltage used between the plates. 2. Which electrode gave better results in the electrolysis experiment?The cathode provided a better result than the anode. Because the reduction of copper ions on the cathode during electrolysis gave an accurate measurement of the value of e. 3. Why should the electrodes be kept in fixed relative positions during the electrolysis?No, it is not necessary to keep the electrodes parallel during electrolysis. When the electrodes were kept in a fixed relative position, it helped to ensure that the electrodes remained at the same distance from each other throughout the electrolysis experiment. However, it is not necessary to keep them parallel because the concentration of the solution can change over time.The second electrolysis was more accurate than the first one. It is because we obtained the desired result, i.e., 3.3 x 10^{-19} C. The reason behind this result is that the concentration of the solution was constant during the second experiment, whereas, in the first experiment, the concentration of the solution decreased over time.

For more such questions on Millikan oil-drop

https://brainly.com/question/14780949

#SPJ11

The ionic salt that contains a CO₄ ion would produce a neutral solution. Hence, option C is correct.

Salts are ionic compounds that completely disintegrate into ions when they are dissolved in water. They are created when acids and bases react, and they are always made up of either metal cations or cations made from ammonium (NH₄⁺).

The pH of a salt depends on the basicity or acidity of its anion and cation. The salt of a strong acid and a strong base creates a neutral solution because it does not create any H+ or OH-. Likewise, if the salt comes from a weak acid and a strong base, the resulting solution will be basic because the conjugate base of a weak acid is a strong base.

Therefore, the given ionic salt with a CO₄ ion is neutral.

Learn more about iconic net here: https://brainly.com/question/30376517

#SPJ4

A student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of the reaction is b. Rate = k[A]

The given question is related to the rate law of the reaction. The student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of a reaction is a mathematical equation that relates the rate of the reaction to the concentrations of reactants and the reaction's constant of proportionality. The rate law is also called the rate equation or rate expression.

As per the given information, the plot of [A] vs t is linear, which means that the reaction is a first-order reaction. The plot of ln[A] vs t is non-linear, which means that the reaction is not zero-order or first-order. It could be a second-order or third-order reaction. The plot of 1/[A] vs t is non-linear, which means that the reaction is not a first-order reaction. It could be a second-order or third-order reaction. Therefore, the rate law of the reaction can be given as Rate = k[A]. This represents a first-order reaction. Hence, the correct option is Rate = k[A].

Learn more about rate law at:

https://brainly.com/question/14779101

#SPJ11

The standard molar enthalpy of reaction for the given reaction is -822 kJ/mol.

The balanced chemical equation for the reaction is:

Ca(s) + 1/2 O2(g) + CO2(g) → CaCO3(s)

The standard enthalpies of formation for the reactants and product are:

ΔH°f[Ca(s)] = 0 kJ/mol

ΔH°f[O2(g)] = 0 kJ/mol

ΔH°f[CO2(g)] = -385 kJ/mol

ΔH°f[CaCO3(s)] = -1207 kJ/mol

The ΔH°r for the reaction can be calculated using the following formula:

ΔH°r = ΣnΔH°f(products) - ΣnΔH°f(reactants)

ΔH°r = [ΔH°f(CaCO3(s))] - [ΔH°f(Ca(s)) + 1/2ΔH°f(O2(g)) + ΔH°f(CO2(g))]

ΔH°r = [-1207 kJ/mol] - [0 kJ/mol + 1/2(0 kJ/mol) + (-385 kJ/mol)]

ΔH°r = -822 kJ/mol

Delta (Δ) is a symbol used to represent a change or difference in a physical or chemical property. It is often used to denote the change in energy or enthalpy of a chemical reaction, as well as changes in temperature, pressure, or concentration.

For example, when a chemical reaction occurs, the difference in energy between the reactants and products can be represented by the symbol ΔH, with a positive value indicating an endothermic reaction (absorbing heat) and a negative value indicating an exothermic reaction (releasing heat). Delta can also be used to represent changes in other properties, such as entropy (ΔS) or free energy (ΔG), which are important in predicting the spontaneity and direction of chemical reactions.

To learn more about Delta visit here:

brainly.com/question/23081977

#SPJ4

Certain molecules/atoms can diffuse directly through the phospholipid bilayer of a membrane (without the help of a transport protein). Small, non-polar molecules can diffuse most easily directly through a membrane.

What is the membrane?

Membrane can be defined as a selectively permeable layer which encloses the cell or organelles in it. Membrane acts as a physical barrier that separates a cell from its environment. It allows the entry of certain nutrients and minerals and expels waste and other unwanted products. Diffusion is the movement of substances from a region of higher concentration to a region of lower concentration in order to attain equilibrium. It is due to the random motion of particles. No energy is required for this process, and it is a passive process.

The types of molecules that will diffuse most easily directly through a membrane are small, non-polar molecules. These types of molecules have a very small molecular weight, and they are able to fit easily through the gaps between the phospholipids in the membrane. Some examples of small, non-polar molecules include oxygen, carbon dioxide, and lipids.

Learn more about diffusion on:

https://brainly.com/question/94094

#SPJ11

The net ionic equation for the reaction between [tex]Ba(OH)_2(aq) and H_2SO_^4 (aq)  is :2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex]

When the following two solutions are mixed:

[tex]K_2CO_3(aq) + Fe(NO_3)_3(aq)[/tex], the mixture contains the following ions:

[tex]NO_3- (aq), Fe^3+, CO_3^ 2-, K^+[/tex]. The spectator ions are NO3- (aq) and K+, and the ions that react are Fe3+ and CO3 2-.

Hence , The correct net ionic equation, including all coefficients, charges, and phases, for the reactants [tex]Ba(OH)_2(aq) + H_2SO_4(aq) [/tex] is 2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex] .
To know more about Ionic equation refer here :

https://brainly.com/question/11510759

#SPJ11

Al(NO3)3 solution concentration and the concentration of H3O+ ions in the solution following the addition of HNO3 are given in the problem. We can determine the presence of [Al(H2O)5(OH)2+] in the solution using this knowledge along with the known equilibria for the hydrolysis of Al3+.

For Al3+, the hydrolysis process may be expressed as follows:

Al(H2O)63+ + water becomes Al(H2O)5(OH)2+ + H3O+.

The reaction's equilibrium constant expression is as follows:

Al(H2O)5(OH)2+) = K

Al(H2O)63+ / [H3O+]

We must take into account the dissociation of Al(NO3)3 in water in order to determine [Al(H2O)5(OH)2+] in a 0.15 M solution of Al(NO3)3:

Al3+ (aq) + 3NO3- Al(NO3)3 (s) (aq)

Al3+ has a concentration of 0.45 M (3 times that of the Al(NO3)3 solution) in an Al(NO3)3 solution with a concentration of 0.15 M. H3O+ is present in the solution at a concentration of 0.10 M.

learn more about Al(NO3)3 solution here:

https://brainly.com/question/14215622

#SPJ4

To eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.

what is the photon frequency needed? Chromium metal has a binding energy of 7.21 x 10^-19 J for certain electrons. So, the energy needed to eject the electrons is: Energy needed = Binding energy + Ejected electrons' energy = 7.21 x 10^-19 J + 2.2 x 10^-19 J = 9.41 x 10^-19 JNow, we know the energy needed to eject electrons is 9.41 x 10^-19 J. And we know that the energy of a photon is given by E = hν, where h is Planck's constant and ν is the frequency of the photon. To find the photon frequency needed, we can use the equation:

E = hνν = E/hν = (9.41 x 10^-19 J) / (6.63 x 10^-34 J·s)ν = 1.42 x 10^15 Hz

Hence, the photon frequency needed to eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.

Learn more about photon frequency  at brainly.com/question/30107923

#SPJ4

Approximately 5.78 grams of glucose must be consumed to sustain a power output of 25 W for one hour.

Power = Energy/Time

25 W = Energy/3600 s

Energy = 25 W x 3600 s = 90000 J

C6H12O6 + 6O2 → 6CO2 + 6H2O + energy

The energy produced by the complete oxidation of glucose is approximately 2.8 x 10^6 J/mol. Therefore, to produce 90,000 J of energy, we need to divide 90,000 J by the energy produced per mole of glucose:

90,000 J / (2.8 x 10^6 J/mol) = 0.0321 mol

The molar mass of glucose is approximately 180 g/mol. Therefore, the mass of glucose required to sustain a power output of 25 W for one hour is:

0.0321 mol x 180 g/mol = 5.78 g

Power in physics is defined as the rate at which work is done or energy is transferred. It is a scalar quantity that measures how quickly a certain amount of energy is being transferred or converted from one form to another. The standard unit for power is the watt (W), which is equivalent to one joule per second (J/s).

In more mathematical terms, power is given by the formula P = W/t, where P represents power, W represents work, and t represents time. Power is also related to force and velocity through the equation P = Fv, where F represents force and v represents the velocity.

Power is an important concept in physics and engineering, as it is used to describe the performance of machines, engines, and other energy conversion systems. The greater the power of a system, the more work it can do in a given amount of time, and the faster it can accomplish a task.

To learn more about Power visit here:

brainly.com/question/13937812

#SPJ4

The correct answer for Acid dissociation constant of alloxanic acid is 1.09 × 10⁻.

The formula for alloxanic acid is HC4H3N2O5. Its pH, when it is in a 0.74 M solution, is 3.39.

We need to determine the acid dissociation constant of alloxanic acid. We can use the following formula for this purpose:

Ka = [H+][A-] / [HA]   Where [H+] is the concentration of hydrogen ions, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.

We need to find out the concentration of hydrogen ions and the concentration of the acid. The pH of a solution is equal to the negative log of the hydrogen ion concentration.

We can use this formula to determine the concentration of hydrogen ions: pH = -log[H+] We can rearrange this equation to get [H+]: [H+] = 10-pH.

The concentration of hydrogen ions is: [H+] = 10-3.39 = 4.45 × 10⁻⁴M The concentration of the acid is 0.74 M. The concentration of the conjugate base can be determined by the following formula: [A-] = [H+] × (Ka / [HA]).

We can rearrange this equation to get Ka: Ka = ([H+] × [HA]) / [A-]

Substituting the values, we get: [A-] = [H+] × (Ka / [HA]) [A-] = (4.45 × 10-4) × (Ka / 0.74) [A-] = 3.01 × 10⁻⁶Ka

We can substitute this value of [A-] in the above formula for Ka:Ka = ([H+] × [HA]) / [A-]Ka = (4.45 × 10⁻⁴) × 0.74 / 3.01 × 10⁻⁶Ka = 1.09 × 10⁻⁵.

For more information about acid dissociation constant refer here

https://brainly.com/question/15012972?

#SPJ11

The pH of 0.1 M ethanol is higher than the pH of 0.1 M acetic acid is because ethanol is a neutral molecule while acetic acid is a weak acid.

The pH of 0.1 M ethanol is higher than the pH of 0.1 M acetic acid because ethanol is a neutral molecule and does not donate or accept protons, while acetic acid is a weak acid that can donate a proton to water, creating hydronium ions (H₃O⁺) and decreasing the pH.

Here are the structures of ethanol and acetic acid to support this explanation:

Ethanol (CH₃CH₂OH):

   H H  

    |   |

H-C-C-OH

    |   |

   H H

Acetic Acid (CH₃COOH):
   H O
    |   ||
H-C-C-O-H
    |
   H

In acetic acid, the carboxylic acid group (-COOH) can donate a proton (H⁺) to water, which increases the concentration of hydronium ions (H₃O⁺) in the solution, leading to a lower pH:

CH₃COOH + H₂O → CH₃COO⁻ + H₃O⁺

Ethanol, on the other hand, does not have an acidic hydrogen and will not donate protons to water, so its pH remains neutral (pH around 7).

To know more about pH:

https://brainly.com/question/3649733

#SPJ11

The concentrations of A and B in the reaction after a time of about 75 seconds are 0.0465 M.

The initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B. The balanced chemical equation of the reaction is as follows: AB → A + B

According to the law of chemical equilibrium, the concentration of products and reactants changes until a state of equilibrium is reached. As a result, the initial concentration of AB decreases, while that of A and B increases by the same amount. At equilibrium, the rate of the forward reaction is the same as the rate of the backward reaction. As a result, the concentration of the reactants and products remains constant for a long period of time, and the reaction has reached equilibrium. As a result, it is important to identify whether or not the reaction has reached equilibrium. The concentration of A and B is calculated using the following formula:

[A] = C₀ - x

[B] = C₀ - x

[AB] = C₀ - x

Here, x is the amount of the substance that has reacted. Since, we know the initial concentration of AB, we can solve for the value of x. We will then use the value of x to compute the concentrations of A and B. For a reaction, the initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B.

The given reaction can be balanced as follows: AB → A + B. Let's assume that at equilibrium, the amount of A and B produced is "x."

[AB] = C-x

Let's calculate the equilibrium concentration of AB:

[AB] = C₀ - x = 0.290 M - x

At equilibrium, the concentrations of A and B are equal since they are produced in equal amounts. Using the law of chemical equilibrium, we can construct the equilibrium constant expression for the reaction:

Kc =x²{0.290 - x}

The equilibrium concentration of AB is 0.290 M - x. The equilibrium concentration of A and B is: x². The equilibrium constant expression can be used to find the value of x. Put the value of [AB], [A], and [B] in the formula of equilibrium constant expression: Kc = x²{0.290 - x}

5.26 = x²{0.290 - x}

{x=0.093}

After solving for x, we get the value of 0.093 M. Therefore, the concentration of A and B at equilibrium is:

[A] = [B] = x{2} = {0.093}{2} = 0.0465

Hence, the concentrations of A and B after 75 seconds are 0.0465 M.

Learn more about Equilibrium concentration here:

https://brainly.com/question/16645766

#SPJ11

The correct answer is: In transpiration, because some of its properties change, water undergoes a physical change but keeps its identity.

Transpiration and photosynthesis are both processes that involve the use of water by plants.

Transpiration is the process by which water evaporates from the leaves of a plant and is released into the atmosphere. This occurs through tiny openings on the surface of leaves called stomata. The water that is lost through transpiration is replaced by water absorbed by the roots of the plant from the soil.

Photosynthesis, on the other hand, is the process by which plants use water, along with carbon dioxide and sunlight, to produce oxygen and glucose. During photosynthesis, water is split into hydrogen and oxygen, and the oxygen is released into the atmosphere as a byproduct. The glucose that is produced is used as a source of energy by the plant.

In transpiration, because some of its properties change, water undergoes a physical change but keeps its identity. In photosynthesis, because its identity changes, water undergoes a chemical change.

To know more about photosynthesis, visit:

https://brainly.com/question/29764662

#SPJ1

Answer:

Its A

Explanation:

Got it right on the quiz

Answer:

Explanation:

I_3^−

The triiodide ion, I3−, is a polyatomic anion composed of three iodine atoms. It has a central iodine atom, which is surrounded by two other iodine atoms in a trigonal planar geometry. The hybridization of the central atom is sp2. This is because the central atom has 3 electron pairs in its valence shell, which means it needs to form three bonds with the other atoms. This requires the central atom to use one s-orbital and two p-orbitals to form three sp2 hybrid orbitals. These three sp2 orbitals are then used to form the three bonds with the other two iodine atoms, resulting in a trigonal planar geometry.

By collecting data on changes in wind patterns and moisture levels, scientists can gain a better understanding of the atmospheric conditions that are necessary for monsoon formation and identify any changes that may be occurring.

Two changes in atmospheric conditions that scientists should collect data on to determine the cause of a change in weather during monsoon season are:

To know more about the Weather, here

https://brainly.com/question/16412394

#SPJ4

None of the available choices have as many molecules as 1 L of STP-produced C2H4 gas.

At STP (Standard Temperature and Pressure), which is defined as a temperature of 273.15 K and a pressure of 1 atmosphere, the volume of a gas is directly proportional to the number of molecules present. This means that if we have two gases at STP with the same volume, they must contain the same number of molecules.

For a gas with a given volume, the number of molecules present can be calculated using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

To determine which gas has the same number of molecules as 1 L of C2H4 gas, we need to calculate the number of moles of C2H4 present in 1 L of C2H4 gas. The molar volume of any gas at STP is 22.4 L/mol.

The molar mass of C2H4 is 28.05 g/mol, so 1 L of C2H4 gas at STP contains:

n = m/M = 1000 g / 28.05 g/mol = 35.6 mol

Therefore, 1 L of C2H4 gas contains 35.6 moles of C2H4.

(a) For 0.5 L of H2 gas, the number of moles present is:

n = PV/RT = (1 atm x 0.5 L) / (0.0821 L atm/mol K x 273.15 K) = 0.0207 mol

Since 0.0207 mol is less than 35.6 mol, 0.5 L of H2 gas has fewer molecules than 1 L of C2H4 gas.

(b) For 1 L of Ne gas, the number of moles present is:

n = PV/RT = (1 atm x 1 L) / (0.0821 L atm/mol K x 273.15 K) = 0.0409 mol

Since 0.0409 mol is less than 35.6 mol, 1 L of Ne gas has fewer molecules than 1 L of C2H4 gas.

(c) For 2 L of H2O gas, the number of moles present is:

n = PV/RT = (1 atm x 2 L) / (0.0821 L atm/mol K x 273.15 K) = 0.082 mol

Since 0.082 mol is less than 35.6 mol, 2 L of H2O gas has fewer molecules than 1 L of C2H4 gas.

(d) For 3 L of Cl2 gas, the number of moles present is:

n = PV/RT = (1 atm x 3 L) / (0.0821 L atm/mol K x 273.15 K) = 0.123 mol

Since 0.123 mol is less than 35.6 mol, 3 L of Cl2 gas has fewer molecules than 1 L of C2H4 gas.

Therefore, none of the given options have the same number of molecules as 1 L of C2H4 gas at STP.

To learn more about  molecules refer to:

brainly.com/question/14646440

#SPJ4

The final concentration of DCMU in the locomotion chambers will be 0.1 mM. If 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 10mM DCMU is added.

To Calculate the final concentration of Sodium Azide and DCMU in the locomotion chambers. The final concentration of Sodium Azide in the locomotion chambers will be 10mM (millimolar) if 10mL (milliliters) of the Chlamydomonas, 100 μL (microliters) of sterile water, and 100 μL of 1M (molar) Sodium Azide is added.

The final concentration of DCMU (3-(3,4-dichlorophenyl)-1,1-dimethylurea) in the locomotion chambers will be 0.1 mM (millimolar) if 10 mL (milliliters) of the Chlamydomonas, 100 μL (microliters) of sterile water, and 100 μL of 10 mM (millimolar) DCMU are added.

Calculating the final concentration of DCMU:

Formula: C1V1 = C2V2C1 = initial concentration of DCMU = 10 mMV1 = volume of DCMU added = 100 μL (microliters)C2 = final concentration of DCMU = ?V2 = final volume = 10 mL + 100 μL + 100 μL = 10.2 mL

(convert 100 μL to mL by dividing it by 1000)

Substituting the values in the formula:

C1V1 = C2V210 mM x 100 μL = C2 x 10.2 mL1000 (since 1 mL = 1000 μL)C2 = 0.098 mM (millimolar) = 0.1 mM (approx.)

Thus, the final concentration of DCMU in the locomotion chambers will be 0.1 mM if 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 10mM DCMU is added.

For more such questions on concentration , Visit:

https://brainly.com/question/28564792

#SPJ11