can someone help me with this

A metal electrode composed of  strong reducing agent will have a greater

electrical potential to push electrons toward the electrode composed of a

weak reducing agent.

Strong reducing agents are compounds which donates or loses electrons

with a corresponding increase in the oxidation state. Weak reducing agents

can also be referred to as oxidizing agents and they accept the electrons

from the strong reducing agents which results in a reduction in the oxidation

state.

The strong reducing agent has a greater electric potential which aids the

electrons being pushed towards the electrodes with a weak reducing agent.

Read more on https://brainly.com/question/7484765

Answer:

see answer

Explanation:

DO the postulates of Daltons atomic theory explain the law of conservation of mass and the law of constant composition.

1. Everything is composed of atoms, which are the indivisible building blocks of matter and cannot be destroyed or divided any further.

2. All atoms of a single pure element are the same in size and mass

3. Atoms of different elements vary from each other in size and mass.

4. Compounds are produced through different simple whole-number combinations of atoms to produce molecules.  

5. Anywhere a compound exists, it will have the same atoms in the same ratio.

6. A chemical reaction between compounds is a re-arrangement of atoms

The law of conservation of mass is shown in 2, 4. and 5.

The law of constant co,position is shown in 2, 4, 5, and 6

Answer:

I am using an example for this in this table it works for any other compound as well.

The theoretical yield of sodium chloride when 8.3 g of sodium react with 4.5 g of chlorine is 3.30 g

We'll begin calculating the masses of Na and Cl that reacted and the mass of NaCl produced from the balanced equation.

Molar mass of Na = 23 g/mol

Mass of Na from the balanced equation = 2 × 23 = 46 g

Molar mass of Cl₂ = 2 × 35.5 = 71 g/mol

Mass of Cl₂ from the balanced equation = 1 × 71 = 71 g

Molar mass of NaCl = 23 + 35.5 = 58.5 g/mol

Mass of NaCl from the balanced equation = 2 × 58.5 = 117 g

SUMMARY

From the balanced equation above,

46 g of Na reacted with 71 g of Cl₂ to produce 117 g of NaCl

From the balanced equation above,

46 g of Na reacted with 71 g of Cl₂

Therefore,

8.3 g of Na will react with = (8.3 × 71)/46 = 12.81 g of Cl₂

From the calculation made above, we can see that a higher amount (i.e 12.81 g) of Cl₂ than what was given (i.e 4.5 g) is needed to react completely with 8.3 g of Na.

Therefore, Cl₂ is the limiting reactant and Na is the excess reactant

From the balanced equation above,

71 g of Cl₂ reacted to produce 117 g of NaCl.

Therefore,

4.5 g of Cl₂ will react to produce = (4.5 × 117)/71 = 3.30 g of NaCl

Thus, the theoretical yield of NaCl produced is 3.30 g

Learn more: https://brainly.com/question/25669079

Answer:

The correct answer is 7.4 g NaCl

Explanation:

Answer:

b

Explanation:

Answer:

oxygen are covalent bonds because they require 2 more electrons to obtain their octet shell

so when they combine with any other element, they form a covalent bond

Explanation:

Oxygen requires two shared electrons to fill its outermost shell therefore to covalent bonds form.

Patients with hyperparathyroidism would be at risk for developing renal calculi because of high calcium levels excreted by the kidney.

Hyperparathyroidism occurs when there is over secretion of parathyroid hormone by the parathyroid glands.

The parathyroid hormone is responsible for the following in the body:

Renal calculi are strong masses of stones deposited in the kidneys or urinary bladder.

When there is excess calcium in the blood due to hyperparathyroidism, the kidneys would be over burdened with the excretion of excess calcium.

That extra calcium in the kidney & the urine leads to kidney stone development ( renal calculi).

Therefore, patients with hyperparathyroidism would be at risk for developing renal calculi because of high calcium levels excreted by the kidney.

Learn more here:

https://brainly.com/question/24153052

Answer:

Q = mcT ...you can either substitute the molar heat capacity of water in the place of c or the specific heat capacity of water.

Explanation:

Answer:

True

ANTI MEANS AGAINST

Explanation:

Cross-linked polymers are strong and heat - resistant hence they can be used for this purpose.

A polymer is obtained by the combination of small molecules called monomers. A polymer consists of a regular repeating unit of small molecules called monomers.

A cross-linked polymer is a polymer in which covalent bonds are used to join polymer chains together. Cross-linked polymers are strong and heat - resistant hence they can be used for this purpose.

Learn more: https://brainly.com/question/17638582

Sorting the chemical elements in order from least reactive to most reactive, we have:

1. Fluorine (F).

2. Arsenic (As).

3. Antimony (Sb).

4. Silicon (S).

Given the following chemical elements:

Reactivity can be defined as a chemical property which determines how readily a chemical element bonds with other chemical elements, in order to form a new chemical compound.

Generally, the ability of a chemical element to bond with other chemical elements is largely (highly) dependent on the number of valence electrons it has in the outermost shell of its atomic nucleus.

As a general rule, chemical elements that are having fewer number of valence electrons are the most reactive while those having higher valence electrons are least reactive.

Also, chemical reactivity decreases down a group on the periodic table.

Based on the periodic table, the valency for the given chemical elements are:

In conclusion, sorting the chemical elements in order from least reactive to most reactive, we have:

1. Fluorine (F).

2. Arsenic (As).

3. Antimony (Sb).

4. Silicon (S).

Find more information: https://brainly.com/question/18214726

Actuating mechanism is the dry-chemical fixed application method which

introduces a concentration of agent into a closed area.

The actuating mechanism is commonly used in piping systems and

involves the transport of a control member in automatic or remote control

systems.

The closed system makes manual navigation very difficult which is why the

actuating mechanism in automatic systems are usually used to make it less

tedious and accurate.

Read more on https://brainly.com/question/19914723

Answer:

the charge or oxidation number on the cation and anion.

Explanation:

The factor that governs the formula of an ionic compound such as Ca3N2 is the charge or oxidation number on the cation and anion.

In the example, Ca has a +2 charge, N has a -3 charge

So we need 3 x ( +2) to balance 2 x (-3) and have an electrically neutral compound, so

+6 -6 =0

The factor that governs the formula of an ionic compound such as Ca₃N₂ is charge.

Those compounds in which ionic bond is present between the cation and anion is known as ionic compound.

The most important factor that is essential for the formation of ionic compounds are charge i.e. positive charge and negative charge. In the given compound Ca₃N₂, Calcium (Ca) is present in the +2 oxidation state and Nitrogen is present in the -3 oxidation state. So due to attraction between these charges they make a ionic compound.

Hence charge is important factor.

To know more about ionic compounds, visit the below link:

https://brainly.com/question/11638999

Answer:

Cells are the basic structural unit of all living organisms.

Explanation:

Hope this helps, but i'm unsure if it would be multiple choice or not.

Explanation:

The burning of fossil fuels contributes to the addition of greenhouse gases to the atmosphere. These gases trap thermal energy in the Earth's atmosphere.

The materials which contain hydrocarbons which are generated from the remains of decay of plants and animals that are buried underground for many years are called fossil fuels.

The burning of fossil fuels can affect the environment, climatic conditions and human health. The burning of fossil fuels produces large amount of green house gases like CO₂, CH₄, etc. The increase in the amount of green house gases increases the heat and temperature of the earth's surface which leads to global warming.

The increase of temperature due to global warming can cause rise in the sea level, the glaciers of the earth will melt and coastal areas will be submerged under water due to this.

The burning of fossil fuels also releases toxic gases like SO₂, NO₂ which can cause acid rain and the emission these gases causes air pollution.

Thus the burning of fossil fuels has adverse effects.

To know more about fossil fuels, visit;

https://brainly.com/question/29770775

#SPJ6

Answer:

the same number of atomic orbitals.

Explanation:

Answer:

All of the elements in a period have the same number of atomic orbitals. For example, every element in the top row (the first period) has one orbital for its electrons. All of the elements in the second row (the second period) have two orbitals for their electrons.

hope this helps

if it does please mark brianliest

Answer: 82.0 g/mole

Explanation:

Use the units to see that if we divide 1.64 grams by 0.0200 moles, we'll get a number that is grams/mole, the definition of formula mass.

1.64/0.0200 = 82.0 g/mole (3 sig figs)

We can't tell from this alone what the molecular formula might be, but C6H10 (cyclohexene) comes close (82.1 grams/mole).

The formula mass of the compound will be approximately 82.0 g/mol

The formula mass of the compound is the sum of atomic masses of all the atoms in its chemical formula. It is calculated by adding up the atomic masses of the individual elements in the compound, each multiplied by the subscript indicating the number of atoms of that element in the formula.

To find the formula mass of the compound, we'll use the relationship between moles, mass, and molar mass.

Molar mass (in g/mol) = Mass (in g)/Moles

Given:

Mass = 1.64 g

Moles = 0.0200 moles

Let's plug the values and calculate molar mass:

Molar mass = 1.64 g / 0.0200 moles

Molar mass ≈ 82.0 g/mol

The formula mass of the compound is approximately 82.0 g/mol, rounded to three significant figures.

To know more about formula mass here

https://brainly.com/question/28647347

#SPJ3

Frequency – The frequency of a wave is the number of waves that pass a given point in a certain amount of time. Frequency is measured in units called hertz (Hz), and is defined as the number of waves per second. A wave that occurs every second has a frequency of 1 wave per second (1/s) or 1 Hz.

Answer:

need points rn sorry bro hope u get ur answer

Explanation:

Answer:

ionic bond is the type of bond formed from electrostatic attraction between oppositely charged ion in a chemical compound

Mr. garcia uses magnets to hold a poster on a steel filing cabinet because a main component of steel is iron.

The chemical element iron has the atomic number 26 and the symbol Fe. It is a metal that is found in group 8 of a periodic table and the first transition series. It makes up a large portion of the planet's outer or inner core and is the most prevalent element on Earth by mass, just ahead of oxygen.

It is the fourth most prevalent element in the crust of the Earth, having been mostly deposited by meteorites inside its metallic state, along with its ores. Iron ores must be processed in kilns or furnaces that may reach 5000 °C (2,730 °F) and higher, which is approximately 500 °C (932 °F) greater than the temperature needed to smelt copper. Mr. garcia uses magnets to hold a poster on a steel filing cabinet because a main component of steel is iron.

Therefore, mr. garcia uses magnets to hold a poster on a steel filing cabinet because a main component of steel is iron.

To know more about iron, here:

https://brainly.com/question/3299672

#SPJ7

Answer: Ne ( Neon )

Explanation: Lithium ( Li ), beryllium ( Be ), carbon ( C ), oxygen ( O ), and neon ( Ne ), are all in Period 2 in that order. Sodium ( Na ) is in Period 3. Since electron affinities decrease as you go down, Na would have a lower electron affinity level then Li but since electron affinities increase as you go across a period, only neon is farther right then oxygen ( O ), so it would be the only one element of this group that would have a higher electron affinity than that of oxygen.

There are various kind of elements that are present in periodic table. Some elements are harmful, some are radioactive, some are noble gases. Option C is correct option.

Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number.

Periodic table help a scientist to know what are the different types of elements are present in periodic table so that they can discover the new elements that are not being discovered yet.

On going down the group electronegativity decreases. On going along the period the electronegativity increases. So, Neon lies on the extreme right of Fluorine in the same period. Neon will have more electronegativity than oxygen.

Therefore, Neon is more electronegativity than fluorine.

Learn more about periodic table, here:

https://brainly.com/question/11155928

#SPJ2

Answer:

Gravitational potential energy - into Kinetic energy

Explanation:

Answer:

sweat

Explanation:

you get dehydrated in hot weather because your body will release sweat to try and keep you cool

Answer:

Well, the heat can sometimes be very subtle in how it affects the body. If you're out in the sun, it can take just 30 minutes or up to a few hours for the heat to cause dehydration, nausea or it could cause trouble concentrating. When it's hot and humid, your risk of dehydration and heat illness increases. That's because when the air is humid, sweat can't evaporate and cool you as quickly as it normally does, and this can lead to an increased body temperature and the need for more fluids.

I HOPE DAT THIS HELPS :)

Explanation:

Answer:

5540

Explanation:

Answer:

5,440

Explanation:

10 deciseconds = 1 seconds

554 seconds = 5,440 seconds

The frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].

The given parameters;

The frequency of the infrared wave is calculated by using wave equation as shown below;

v = fλ

where;

[tex]f = \frac{v}{\lambda} \\\\f = \frac{3\times 10^8}{5.5 \times 10^{-6}} \\\\f = 5.5 \times 10^{13} \ Hz[/tex]

Thus, the frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].

Learn more here:https://brainly.com/question/18477700

Answer:

519

Explanation:

.......................

Answer:(8.5d) A compound has a formula Mg:(PO.). Which best describes the atoms that make up this compound? A. B. Atom Magnesium (Mg) phosphorus (0) Oxygen (0)

Explanation: