According to Coulomb's law, rank the interactions between charged particles from highest potential energy to lowest potential energy.
Highest potential energy to lowest potential energy.
b. 1+ charge and 1+ charge seperated by 100 pm
a. 1+ charge and 1- charge seperated by 200 pm
c. 1+ charge and 1- charge seperated by 100 pm
d. 2+ charge and 1- charge seperated by 100 pm
[tex]\circ \: \: { \underline{ \boxed{ \sf{ \color{green}{Happy\:learning.}}}}}∘[/tex]
A rock is thrown from the top of a building 146 m high, with a speed of 14 m/s at an angle 43 degrees above the horizontal. When it hits the ground, what is the magnitude of its velocity (i.e. its speed).
Answer:
time is 32 s and speed is 304.3 m/s
Explanation:
Height, h = 146 m
speed, u = 14 m/s
Angle, A = 43 degree
Let it hits the ground after time t.
Use second equation of motion
[tex]h = u t +0.5 at^2\\\\- 146 =14 sin 43 t - 4.9 t^2\\\\4.9 t^2 - 9.5 t - 146 =0 \\\\t =\frac{9.5\pm\sqrt {90.25 + 2861.6}}{9.8}\\\\t=\frac{9.5\pm 54.3}{9.8}\\\\t = 32.05 s, - 22.4 s[/tex]
Time cannot be negative so the time is t = 32 s .
The vertical velocity at the time of strike is
v' = u sin A - g t
v' = 14 sin 43 - 9.8 x 32 = 9.5 - 313.6 = - 304.1 m/s
horizontal velocity
v'' = 14 cos 43 =10.3 m/s
The resultant velocity at the time of strike is
[tex]v=\sqrt{v'^2 + v''^2}\\\\v = \sqrt{304.1^2 +10.3^2 }\\\\v = 304.3 m/s[/tex]
Communication satellite use__sent by a transmitting station to transmit signals over long distances A microwaves B polar waves C light D radio waves
D: radio waves
Explanation:
radio wves are use to carry satellite signals
Newton's law of cooling states that the rate of change of temperature of an object in a surrounding medium is proportional to the difference of the temperature of the medium and the temperature of the object. Suppose a metal bar, initially at temperature 50 degrees Celsius, is placed in a room which is held at the constant temperature of 40 degrees Celsius. One minute later the bar has cooled to 40.18316 degrees . Write the differential equation that models the temperature in the bar (in degrees Celsius) as a function of time (in minutes). Hint: You will need to find the constant of proportionality. Start by calling the constant k and solving the initial value problem to obtain the temperature as a function of k and t . Then use the observed temperature after one minute to solve for k .
Answer:
Newton's law of cooling says that the temperature of a body changes at a rate proportional to the difference between its temperature and that of the surrounding medium (the ambient temperature); dT/dt = -K(T - Tₐ) where T = the temperature of the body (°C), t = time (min), k = the proportionality constant (per minute),
Explanation:
L Pretest Unit 7
Question 13 of 20
Andrew is trying to identify an unknown element. The element is shiny, but it
shatters when hammered and cannot be hammered into different shapes.
Where on the periodic table is this element most likely found?
A. On the left side
B. In one of the series below the main body of the table
C. On the right side
D. Along the metalloid stairstep line
SURMIT
Answer:
C
Explanation:
I think it would be there, it sounds like silicone and thats on the right side
What are the practical systems under continuos time system?
Answer:
REVIEWS
Wing-Kuen Ling, in Nonlinear Digital Filters, 2007
Controllability and observability
For a continuous time system, assume that x(0) = 0. ∀x1, if ∃t1 > 0 and u(t) such that x(t1) = x1, then the continuous time system is said to be reachable. Similarly, for a discrete time system, assume that x(0) = 0. ∀x1, if ∃n1 > 0 and u(n) such that x(n1) = x1, then the discrete time system is said to be reachable. For a continuous time system, if ∀x0, x1, ∃t1 > 0 and u(t) such that x(0) = x0 and x(t1) = x1, then the continuous time system is said to be controllable. Similarly, for a discrete time system, if ∀x0, x1, ∃n1 > 0 and u(n) such that x(0) = x0 and x(n1 = x1, then the discrete time system is said to be controllable. For LTI systems, the set of reachable state is R(|BAB… AnB|), where R(A) is defined as the range of A, that is R(A) = {y : y = Ax}. Also, the LTI systems are controllable if and only if R(A) = Rn Or in other words, rank(|BAB… AnB|) = n.
An insulated tank contains 50 kg of water, which is stirred by a paddle wheel at 300 rpm while transmitting a torque of 0.1 kN-m. At the same time, an electric resistance heater inside the tank operates at 110 V, drawing a current of 2 A. Determine the rate of heat transfer after the system achieves steady state.
Answer:
the rate of heat transfer after the system achieves steady state is -3.36 kW
Explanation:
Given the data in the question;
mass of water m = 50 kg
N = 300 rpm
Torque T = 0.1 kNm
V = 110 V
I = 2 A
Electric work supplied W₁ = PV = 2 × 110 = 220 W = 0.22 kW
Now, work supplied by paddle wheel W₂ is;
W₂ = 2πNT/60
W₂ = (2π × 0.1 × 300) / 60
W₂ = 188.495559 / 60
W₂ = 3.14 kW
So the total work will be;
W = 0.22 + 3.14
W = 3.36 kW
Hence total work done on the system is 3.36 kW.
At steady state, the properties of the system does not change so the heat transfer will be 3.36 KW.
The heat will be rejected by the system so the sign of heat will be negative.
i.e Q = -3.36 kW
Therefore, the rate of heat transfer after the system achieves steady state is -3.36 kW
Water with a volume flow rate of 0.001 m3/s, flows inside a horizontal pipe with diameter of 1.2 m. If the pipe length is 10m and we assume fully developed internal flow, find the pressure drop across this pipe length.
Answer:
[tex]\triangle P=1.95*10^{-4}[/tex]
Explanation:
Mass [tex]m=0.001[/tex]
Diameter [tex]d=1.2m[/tex]
Length [tex]l=10m[/tex]
Generally the equation for Volume flow rate is mathematically given by
[tex]Q=AV[/tex]
[tex]V=\frac{Q}{\pi/4D^2}[/tex]
[tex]V=\frac{0.001}{\pi/4(1.2)^2}[/tex]
[tex]V=8.84*10^{-4}[/tex]
Generally the equation for Friction factor is mathematically given by
[tex]F=\frac{64}{Re}[/tex]
Where Re
Re=Reynolds Number
[tex]Re=\frac{pVD}{\mu}[/tex]
[tex]Re=\frac{1000*8.84*10^{-4}*1.2}{1.002*10^{-3}}[/tex]
[tex]Re=1040[/tex]
Therefore
[tex]F=\frac{64}{Re}[/tex]
[tex]F=\frac{64}{1040}[/tex]
[tex]F=0.06[/tex]
Generally the equation for Friction factor is mathematically given by
[tex]Head loss=\frac{fLv^2}{2dg}[/tex]
[tex]H=\frac{0.06*10*(8.9*10^-4)^2}{2*1.2*9.81}[/tex]
[tex]H=19.9*10^{-9}[/tex]
Where
[tex]H=\frac{\triangle P}{\rho g}[/tex]
[tex]\triangle P=\frac{19.9*10^{-9}}{10^3*(9.81)}[/tex]
[tex]\triangle P=H*\rho g[/tex]
[tex]\triangle P=1.95*10^{-4}[/tex]
what are the symptoms of hepatitis 'b'
Speeding up
Slowing down
Standing still
Holding at a constant non-zero velocity
Answer:
speeding up is the answer
Explanation:
from the graph it can be seen that as the time (horizontal axis) increases the speed of vehicle (vertical axis) increases
A ball is thrown horizontally from the top of a building 59 m high. The ball strikes the ground at a point 65 m horizontally away from and below the point of release. What is the speed of the ball just before it strikes the ground
Answer:
Explanation:
We are looking for final velocity. Since the ball is thrown horizontally, there is no upwards velocity, so the y dimension here is only useful to us for finding how long the ball was in the air. In the y dimension, here's what we know:
a = -9.8 m/s/s
Δx = -59 m
[tex]v_0=0[/tex] (again, initial upwards velocity is 0 because the ball was thrown horizontally)
We can put all that together in the equation:
Δx = [tex]v_0t+\frac{1}{2}at^2[/tex] and filling in:
[tex]-59=0t+\frac{1}{2}(-9.8)t^2[/tex] which simplifies to
[tex]-59=\frac{1}{2}(-9.8)t^2[/tex] and solving for t:
[tex]t=\sqrt{\frac{2(-59)}{-9.8} }[/tex] and
t = 3.5 sec
Now we can use that time in the d = rt equation, which is all we need for the horizontal dimension (I'll show you why in just a second). In the horizontal dimension, here's what we know:
a = 0 m/s/s
Δx = 65 m
t = 3.5 sec
Putting that all together in our one-dimensional equation for displacement:
Δx = [tex]v_0t+\frac{1}{2}at^2[/tex] and acceleration is 0, we can simplify that down to
Δx = [tex]v_0t[/tex] which is the exact same thing as d = rt where r is the velocity we are looking for. Filling in:
65 = v(3.5) so
v = 18.6 m/s
That's the velocity with which the ball strikes the ground.
how many protons does a neutral atom of oxygen-16 have
Answer:
eight
Explanation:
it's atomic number is 8 which mean that an oxygen atom has eight protons in it's nucleus
in which states of matter will a substance have a fixed volume
Answer:
Solid is the state in which Matter maintains a fixed volume
Answer:
The state of matter that has a fixed volume is Solid.
Explanation:
Solid substances will maintain a fixed volume and shape.
Which shows the formula for converting from degrees Celsius to degrees Fahrenheit?
°F = (9/5 × °C) +32
°F = 5/9 × (°C – 32)
°F = °C – 273
°F = °C + 273
Answer:
the first answer
Explanation:
(32°F − 32) × 5/9 = 0°C
Answer:
Answer: A
Explanation:
. A wave moves at a constant speed along a string. Which one of the following statements is false concerning the motion of particles in the string?
Answer:
The particle speed is constant.
Explanation:
Particles in gases travel quickly in all directions, frequently clashing with each other and the container's edge. The particles gather kinetic energy and travel faster as the temperature rises. The true average speed of the particles is determined by their mass and temperature; larger particles travel more slower around the same temperature than lighter particles.
Thus, the false statement about a wave moving through a constant speed is that:
The particle speed is constant.
which of the following is the correct description of momentum?
-the product of mass and acceleration -the product of mass and velocity
-velocity divided by mass
-acceleration divided by mass
Answer:
The product of mass and velocity is the correct answer
Explanation:
Momentum is defined as mass × velocity
p = mv
Answer:
The product of mass and velocity
Explanation:
I just did it and got it right with a 100%
Posted 1/3/23
galileo was a contemporary of
A toy car of mass 600g moves through 6m in 2 seconds. The average kinetic energy of the toy car is
Answer:
12
Explanation:
I'm a beginner so am not sureeeeee
The diagram shows the molecular structure of ethane. What is the chemical
formula for ethane?
Ethane
H H
H-C-C-H
| |
H H
URGENT
The component of solid-state physics that works with and/or heats metals and alloys to give them certain desired
shapes or properties is..
Answer:
the is metallurgy .....
Newton's third law states that for every action force there is an equal and opposite reaction force. An idiot in your class says, "Wow that means everything cancels and nothing ever moves, it is all an illluussion! Wowwwwww" What statement best proves to him he is an idiot.
a) The equal and opposite forces act on different objects
b) If there is even a slight imbalance in the third law there will be a net force causing acceleration
C) he's right, all forces cancel, any motion I have ever seen is wrong
[tex] \huge \mathfrak{Answer.... }[/tex]
The Correct Answer is :
B. if there is even a slight imbalance in third law there will be a net force causing acceleration.
A slight difference in the forces can result in acceleration of an object.
[tex] \mathrm{✌TeeNForeveR✌}[/tex]
Who Knows?
Thank You
Answer:
Use below table to read the color codes.
The engine of a locomotive exerts a constant force of 6.8 105 N to accelerate a train to 80 km/h. Determine the time (in min) taken for the train of mass 1.1 107 kg to reach this speed from rest.
Answer:
t = 6 minutes
Explanation:
Given that,
Force,[tex]F=6.8\times 10^5\ N[/tex]
Initial speed of the train, u = 0
Final speed of the train, v = 80 km/h = 22.22 m/s
The mass of the train, [tex]m=1.1\times 10^7\ kg[/tex]
We need to find the time taken by the train to come to rest. We know that,
F = ma
[tex]F=\dfrac{m(v-u)}{t}\\\\t=\dfrac{m(v-u)}{F}\\\\t=\dfrac{1.1\times10^7\times (22.22-0)}{6.8\times 10^5}\\\\t=359.44\ s[/tex]
or
t = 6 minutes (approx)
So, the required time is equal to 6 minutes.
An electric drill starts from rest and rotates with a constant angular acceleration. After the drill has rotated through a certain angle, the magnitude of the centripetal acceleration of a point on the drill is 8.2 times the magnitude of the tangential acceleration. What is the angle?
Answer:
The angle is 4.1 rad.
Explanation:
The centripetal acceleration (α) is given by:
[tex] \alpha = \omega^{2} r [/tex] (1)
Where:
ω: is the angular velocity
r: is the radius
And the tangential acceleration (a) is:
[tex] a = \alpha r [/tex] (2)
Since the magnitude of "α" is 8.2 times the magnitude of "a" (equating (2) and (1)) we have:
[tex] \omega^{2} r = 8.2\alpha r [/tex]
[tex] \omega^{2} = 8.2\alpha [/tex] (3)
Now, we can find the angle with the following equation:
[tex] \omega_{f}^{2} = \omega_{0}^{2} + 2\alpha \Delta \theta [/tex]
Where:
[tex] \omega_{f}[/tex]: is the final angular velocity [tex] \omega_{0}[/tex]: is the initial angular velocity = 0 (it starts from rest)
[tex]\Delta \theta[/tex]: is the angle
[tex] \omega^{2} = 2\alpha \Delta \theta [/tex] (4)
By entering equation (3) into (4) we can calculate the angle:
[tex] 8.2\alpha = 2\alpha \Delta \theta [/tex]
[tex] \Delta \theta = 4.1 rad [/tex]
Therefore, the angle is 4.1 rad.
I hope it helps you!
Bola bermassa 200 gram dilempar
ke bawah dari ketinggian 20 m
dengan kecepatan 2 m/s. Jika
percepatan gravitasi bumi 10
m/s2 energi kinetik pada
ketinggian 8 m adalah ......
Answer:
0.4
Explanation:
[tex] \frac{1}{2} mv ^{2} [/tex]
kinetic energy formula , potential energy is not considered
0.5×0.2×2×2
Does the same battery always deliver the same amount of flow to any circuit? Mention two observations of any circuits in this lab that support your answer. Explain.
Answer:
Yes
Explanation:
Given that the battery is the same the PD ( potential difference ) in the circuit will also be the same likewise the flow of charge in the circuit,
Hence the same amount of charge flow is delivered to any circuit.
attached below are examples
When a condenser discharges electricity, the instantaneous rate of change of the voltage is proportional to the voltage in the condenser. Suppose you have a discharging condenser and the instantaneous rate of change of the voltage is -0.01 of the voltage (in volts per second). How many seconds does it take for the voltage to decrease by 90 %?
Answer:
460.52 s
Explanation:
Since the instantaneous rate of change of the voltage is proportional to the voltage in the condenser, we have that
dV/dt ∝ V
dV/dt = kV
separating the variables, we have
dV/V = kdt
integrating both sides, we have
∫dV/V = ∫kdt
㏑(V/V₀) = kt
V/V₀ = [tex]e^{kt}[/tex]
Since the instantaneous rate of change of the voltage is -0.01 of the voltage dV/dt = -0.01V
Since dV/dt = kV
-0.01V = kV
k = -0.01
So, V/V₀ = [tex]e^{-0.01t}[/tex]
V = V₀[tex]e^{-0.01t}[/tex]
Given that the voltage decreases by 90 %, we have that the remaining voltage (100 % - 90%)V₀ = 10%V₀ = 0.1V₀
So, V = 0.1V₀
Thus
V = V₀[tex]e^{-0.01t}[/tex]
0.1V₀ = V₀[tex]e^{-0.01t}[/tex]
0.1V₀/V₀ = [tex]e^{-0.01t}[/tex]
0.1 = [tex]e^{-0.01t}[/tex]
to find the time, t it takes the voltage to decrease by 90%, we taking natural logarithm of both sides, we have
㏑(0.01) = -0.01t
So, t = ㏑(0.01)/-0.01
t = -4.6052/-0.01
t = 460.52 s
A car starts from rest and accelerates uniformly in a straight line in the positive x direction. After 25 seconds, its speed is 90 km/h.
a) Determine the acceleration of the object. [5]
b) How far does the object travel during the first 25 seconds? [3]
c) What is the average velocity of the object during the first 25 seconds?
Answer:
A. 1 m/s²
B. 312.5 m
C. 12.5 m/s
Explanation:
We'll begin by converting the velocity i.e 90 Km/h to m/s. This can be obtained as follow:
Velocity (Km/h) = 90 Km/h
Velocity (m/s) =?
Velocity (m/s) = Velocity (Km/h) × 1000 / 3600
Velocity (m/s) = 90 × 1000 / 3600
Velocity (m/s) = 90000 / 3600
Velocity (m/s) = 25 m/s
A. Determination of the acceleration.
Initial velocity (u) = 0 m/s
Final velocity (v) = 25 m/s
Time (t) = 25 s
Acceleration (a) =?
v = u + at
25 = 0 + (a × 25)
25 = 0 + 25a
25 = 25a
Divide both side by 25
a = 25/25
a = 1 m/s²
B. Determination of the distance travelled.
Initial velocity (u) = 0 m/s
Final velocity (v) = 25 m/s
Acceleration (a) = 1 m/s²
Distance travelled (s) =?
v² = u² + 2as
25² = 0 + (2 × 1 × s)
625 = 0 + 2s
625 = 2s
Divide both side by 2
s = 625 / 2
s = 312.5 m
C. Determination of the average velocity.
Total distance travelled = 312.5 m
Total time = 25 s
Average velocity =?
Average velocity = Total distance / total time
Average velocity = 312.5 / 25
Average velocity = 12.5 m/s
A hockey puck is sliding across the ice with an initial velocity of 25 m/s. If the coefficient of friction between the hockey puck and the ice is 0.08, how much time (in seconds) will it take before the hockey puck slides to a stop
Answer: 31.89seconds
Explanation:
Based on the information given, we are meant to calculate deceleration which will be:
t = V/a
where, a = mg
Therefore, t = V/mg
t = 25/0.08 × 9.8
t = 25/0.784
t = 31.89seconds
Therefore, the time that it will take before the hockey puck slides to a stop is 31.89seconds.
Ion how to do this at all
At a rock concert, the sound intensity 1.0m in front of the bank of loudspeakers is 0.10 W/m^2. A fan is 30.0m from the loudspeakers. Her eardrums have a diameter of 8.4mm.How much energy is transferred to each eardrum in one second?
Answer: The amount of energy transferred to each eardrum in one second is [tex]6.2 \times 10^{-9} J[/tex].
Explanation:
Given: Intensity = 0.10 [tex]W/m^{2}[/tex]
Now, at 30.0 m the intensity will be calculated as follows.
[tex]Intensity = \frac{(30.0 m)^{2}}{(1 m)^{2}}\\= 900[/tex]
This means that the intensity is 900 times less assuming that the wave is spherical.
Hence, the new intensity is calculated as follows.
[tex]\frac{0.10 W/m^{2}}{900}\\= 1.11 \times 10^{-4} W/m^{2}[/tex]
The area of ear drum is expressed as follows.
[tex]Area = \pi \times r^{2}\\= 3.14 \times (4.2 mm)^{2}\\= 5.54 \times 10^{-5} m^{2}\\[/tex]
Formula used to calculate energy is as follows.
[tex]P = I \times a[/tex]
where,
P = power or energy
I = intensity
a = area
Substitute the values into above formula as follows.
[tex]P = I \times a\\= 1.11 \times 10^{-4} W/m^{2} \times 5.54 \times 10^{-5} m^{2}\\= 6.2 \times 10^{-9} W[/tex]
Thus, we can conclude that amount of energy transferred to each eardrum in one second is [tex]6.2 \times 10^{-9} J[/tex].
