a triprotic acid h3a has pka's of 2.50, 5.75, and 9.25. what is the pka for the acid ha2-? if you need to, assume the solution is at 25 oc, where the kw is 1.00x10-14. i won't test again on significant figures (until the cumulative final), but i want to make sure you have the chance for as much practice as you like. if you were keeping track, your final answer should have two significant digits (careful, though, remember your final answer is a logarithm!). to get credit here, save all of your rounding until the end, and report your final answer to those two significant figures.

Answers

Answer 1

The pka for the HA²⁻ is about 9.67. This can be calculated through bisection method as it is a conjugate base.

What is the pKa value?

HA²⁻ is the conjugate base of H₃A, a triprotic acid with pKa values of 2.50, 5.75, and 9.25. It can be written as:

Step 1: Find the pH at which the species Ha²⁻ has half the proton concentration of A³⁻. For a triprotic acid with:

pKa1 < pKa2 < pKa3, the concentration of A³⁻ can be calculated using the following equation:

[A³⁻] = ( [H⁺]³) / ([H⁺]³ + K₁[H⁺]² + K₁K₂[H⁺]+ K₁K₂K₃)

Let x be the concentration of HA²⁻. Then, [A³⁻] = ( [H⁺]³ ) / ([H⁺]³ + K₁[H⁺]² + K₁K₂[H⁺] + K₁K₂K₃) = ( [H⁺]³ ) / ([H⁺]³ + [H⁺]²[0.00316] + [H⁺][0.00316 × 0.01] + [0.00316 × 0.01 × 0.0001] )

Thus, [A³⁻] = [H⁺]³/ ([H⁺]³ + 3.16 × 10⁻⁶ [H⁺]² + 3.16 × 10⁻⁸ [H⁺] + 3.16 × 10⁻¹¹)

Let [A³⁻] = [HA²⁻]/2 = x/2

Thus,  [H⁺]³ / ([H⁺]³ + 3.16 × 10⁻⁶ [H⁺]² + 3.16 × 10⁻⁸ [H⁺] + 3.16 × 10⁻¹¹) = x/2

Since, [H⁺] = 10-pH, and pH = pKa + log10([A-]/[HA]),

we can rewrite the expression as: (10-pH)³ = x/2 (3.16 × 10⁻⁶ + × 2 3.16 × 10⁻⁸ + × 3.16 × 10⁻¹¹ +1)

Rearranging, we get: ×3.16 × 10⁻⁶ + ×2 3.16 × 10⁻⁸ + × 3.16 × 10⁻¹¹ +1 - (2 (10-pH)3) = 0

We can solve this using numerical methods such as Newton-Raphson or bisection method. For simplicity, we can use an online calculator to get the answer. We get: pH = 4.33Thus, the pKa value of Ha2- is:pKa = 14 - pH = 9.67

Learn more about pH here:

https://brainly.com/question/491373

#SPJ11


Related Questions

Write a Lewis structure that obeys the octet rule for the following species. Assign the formal charge for the central atom of. ClO3-If multiple resonance structures exist, use one that does not involve an expanded valence

Answers

The Lewis structure for ClO3- is as follows:

O

|

Cl--O

|

O-

To determine the formal charge of the central atom Cl, we need to calculate the valence electrons and nonbonding electrons present in ClO3-. Chlorine has 7 valence electrons, and each oxygen atom contributes 6 electrons for a total of 24 valence electrons. In this structure, there are 3 lone pairs on each oxygen atom and one Cl-O double bond.

The formal charge of Cl can be calculated as follows:

Formal charge = Valence electrons - Nonbonding electrons - 1/2 (bonding electrons)Formal charge of Cl = 7 - 6 - 4 = -3

The formal charge on the central atom, Cl, is -3. This indicates that Cl has an extra electron compared to its neutral state. The other oxygen atoms have a formal charge of -1 each, indicating that they have an extra electron as well. This arrangement of formal charges indicates that the ClO3- ion is a negatively charged species. The Lewis structure shows that ClO3- obeys the octet rule as each atom has a full outer shell of electrons.

To learn more about Lewis structure, here

https://brainly.com/question/20300458

#SPJ4

Write the formula for the conjugate acid of each of the following bases.Express your answer as a chemical formula.a)C2H5NH2b)ClO4-c)HPO42-d)HCO3-

Answers

Conjugate acid forms by adding H+ to a base, making a species with a positive charge. Strength depends on the base's strength. Important in acid-base reactions.

The conjugate acid of a base is the species that is formed when a proton (H+) is added to the base molecule. It has one more proton than the base and will have a positive charge. The strength of the conjugate acid depends on the strength of the original base, with the conjugate acid of a weak base being a weak acid, and the conjugate acid of a strong base being a weak acid. The formulas for the conjugate acids of the given bases are C2H5NH3+ for C2H5NH2, HClO4 for ClO4-, H2PO4- for HPO42-, and H2CO3 for HCO3-. Understanding conjugate acids is important in acid-base chemistry because it helps to explain the behavior of acids and bases in chemical reactions.

learn more about conjugate acid here:

https://brainly.com/question/30164261

#SPJ4

the rate of a second order reaction can depend on the concentrations of more than one reactant. the rate of a second order reaction can depend on the concentrations of more than one reactant. true false g

Answers

The given statement that "the rate of a second order reaction can depend on the concentrations of more than one reactant" is true because the rate of the reaction is proportional to the concentration of both reactants.

What is a second-order reaction?

The second-order reaction is a chemical reaction in which two reactants interact and the rate of the reaction is proportional to the concentration of both reactants or to the square of the concentration of a single reactant. The equation is as follows:

k = k[reactant1] [reactant2] or k = k[reactant1]²

The reaction rate constant (k) for a second-order reaction is proportional to the concentration of one or two reactants. The concentration of the reactants has an impact on the reaction rate, as indicated by the order of the reaction.

Therefore, the statement that "the rate of a second order reaction can depend on the concentrations of more than one reactant" is true.

Learn more about second-order reaction here: https://brainly.com/question/14520581.

#SPJ11

What is the name of this compound CH3CH(CH3)CH3

Answers

The Correct option is A, The IUPAC name of the compound CH3–CHCH3–CO–CH3 is 3-methyl-2-butanone.

In chemistry, a compound is a substance formed by the chemical combination of two or more different elements in fixed proportions. The atoms in a compound are held together by chemical bonds, which can be covalent, ionic, or metallic depending on the nature of the elements involved.

Compounds have unique physical and chemical properties that are different from their constituent elements. For example, water is a compound formed by the chemical combination of hydrogen and oxygen in a fixed ratio of 2:1 by mass. While hydrogen is a highly flammable gas and oxygen is necessary for combustion, water is a non-flammable liquid that is essential for life.

There are many different types of compounds, including organic and inorganic compounds. Organic compounds are those that contain carbon atoms, while inorganic compounds do not. Examples of organic compounds include sugars, proteins, and fats, while examples of inorganic compounds include salt, water, and carbon dioxide.

To learn more about Compound visit here:

brainly.com/question/19458442

#SPJ4

Complete Question:

The IUPAC name of the compound CH3–CHCH3–CO–CH3 is

A 3-methyl-2-butanone

B 2-methyl-3-butanone

C Isopropyl methyl ketone

D 2ethyl-2methyl pentane

Balance and state the type for these equations: _Ca(OH)2 + _HCl —> _CaCl2+ _H2O

Answers

Answer:

1,2,1,2

Explanation:

Which one of the following sets of units is appropriate for a third-order rate constant? s–1 mol L–1s–1 L mol–1s–1 L2 mol–2s–1 L3 mol–3s–1

Answers

The appropriate unit for a third-order rate constant is  The L² mol-² s-¹. A third-order reaction is a type of chemical reaction where the concentration of each molecular responding determines how quickly the reaction proceeds.

What is rate constant ?

A reaction rate constant, or reaction rate coefficient, k, quantifies the rate and direction of a chemical reaction in chemical kinetics. The rate constant, also known as the specific rate constant, is the proportionality constant in the equation expressing the relationship between the rate of a chemical reaction and the concentrations of the reactants.

What is third order reaction?

A third-order reaction is a type of chemical reaction where the concentration of each molecular responding determines how quickly the reaction proceeds. Typically, the variation of three concentration factors in this reaction determines the rate.

There may be various cases involved when dealing with a third-order reaction. It might be;

(i) The concentrations of the three reactants are equal.

(ii) Two reactants are present in an equal amount, but one is present in a different amount.

(iii) The concentrations of the three reactants vary or are uneven.

Use formula,

(mol/L)¹⁻ⁿ s⁻¹

To know more about rate constant ,visit ;

brainly.com/question/20305871

#SPJ1

Suppose you are studying the kinetics of the reaction between the peroxydisulfate ion and iodide ion. You perform the reaction multiple times with different starting concentrations and measure the initial rate for each, resulting in this table. Experiment [3,0,21(M) (11(M) Initial Rate (M/s) 0.27 0.38 2.05 2 0.40 0.38 3.06 0.40 0.22 1.76 1 3 Based on the data, choose the correct exponents to complete the rate law. rate=k(5,0 21001-10 as

Answers

Given data,

Experiment [I] [S2O8] Initial Rate (M/s) 3 0.21 0.27 0.38 2.05 2 0.40 0.38 3.06 0.40 0.22 1.76 1 3We are given with the initial rate of reaction and concentration of iodide ion (I) and peroxy disulfate ion (S2O8). We have to determine the rate law expression for the reaction.

Based on the data, we can write the rate law expression,

rate = k [I]^n [S2O8]^m

The order of the reaction for each reactant can be determined by comparing the change in initial rate when the concentration of each reactant is changed. For example, when the concentration of [I] is increased from 0.21 M to 0.40 M, the initial rate of reaction increases from 0.27 M/s to 2.05 M/s;

therefore, we can write:

[I] order = (log(2.05 M/s) - log(0.27 M/s)) / (log(0.40 M) - log(0.21 M))= 1Similarly, the order of reaction with respect to S2O8 is:[S2O8] order = (log(2.05 M/s) - log(0.27 M/s)) / (log(2.0 M) - log(0.21 M))= 1

The overall order of the reaction is the sum of the individual order of each reactant:n + m = 1 + 1 = 2

Thus, the rate law expression for the given reaction rate = k [I]^1 [S2O8]^1 = k [I] [S2O8]

rate = k[I] [S2O8]

Learn more about rate law at brainly.com/question/30379408

#SPJ11

a 30.00-ml sample of 0.125 m hcooh is being titrated with 0.175 m naoh. what is the ph after 21.4 ml of naoh has been added? ka of hcooh

Answers

The pH of the solution after 21.4 mL of NaOH has been added is 3.75.

What is the pH of the solution?

HCOOH (formic acid) is a weak acid, so we can use the Henderson-Hasselbalch equation to calculate the pH of the solution at any point during the titration.

The Henderson-Hasselbalch equation is:

pH = pKa + log([A-]/[HA])

where;

pKa is the acid dissociation constant, [A-] is the concentration of the conjugate base (in this case, HCOO-), and [HA] is the concentration of the acid (in this case, HCOOH).

At the beginning of the titration, before any NaOH has been added, the solution contains only HCOOH and its conjugate base, HCOO-.

The concentration of HCOOH is 0.125 M, and the concentration of HCOO- is 0.

We can calculate the pH using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

pH = -log(1.8 x 10⁻⁴) + log(0/0.125)

pH = 2.74

At the equivalence point, all of the HCOOH has been converted to HCOO- by the addition of NaOH, so the pH will be determined by the concentration of the resulting salt. Since HCOO- is the conjugate base of a weak acid, it will undergo hydrolysis to a small extent, producing OH- ions and raising the pH.

However, we are not at the equivalence point yet.

To find the pH after 21.4 ml of NaOH has been added, we need to first calculate how many moles of NaOH have been added. We know the concentration of the NaOH solution (0.175 M) and the volume that has been added (21.4 mL = 0.0214 L), so we can calculate the number of moles of NaOH:

moles NaOH = concentration x volume

moles NaOH = 0.175 M x 0.0214 L

moles NaOH = 0.003745

Since NaOH reacts with HCOOH in a 1:1 ratio, we know that 0.003745 moles of HCOOH have been neutralized.

This means that there are 0.125 - 0.003745 = 0.121255 moles of HCOOH remaining in the solution.

We also know that 21.4 mL of NaOH has been added to 30.00 mL of HCOOH, so the total volume of the solution is now 51.4 mL.

We can use the moles of HCOOH and the total volume to calculate the concentration of HCOOH:

concentration = moles/volume

concentration = 0.121255/0.0514

concentration = 2.357 M

We can use this concentration and the concentration of the conjugate base (which is equal to the number of moles of NaOH added divided by the total volume) to calculate the pH using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

pH = -log(1.8 x 10⁻⁴) + log(0.003745/2.357)

pH = 3.75

Learn more about pH here: https://brainly.com/question/26424076

#SPJ1

The complete question is below:

a 30.00-ml sample of 0.125 m hcooh is being titrated with 0.175 m naoh. what is the ph after 21.4 ml of naoh has been added? ka of hcooh is 1.8 x 10⁻⁴

Show the Structural feature that distinguishes whether a hydrocarbon is an(a)alkane(b)alkene(c)alkyne(d)aromaticGive an example for each of the above hydrocarbons.

Answers

The structural feature that distinguishes whether a hydrocarbon is an alkane, alkene, alkyne, or aromatic is the type of carbon-carbon bonding present in the molecule.

(a) Alkanes have single covalent bonds between all carbon atoms in the molecule. Ethane (C2H6). (b) Alkenes have at least one double covalent bond between two carbon atoms in the molecule. Example: Ethene (C2H4). (c) Alkynes have at least one triple covalent bond between two carbon atoms in the molecule. Example: Ethyne (C2H2). (d) Aromatic hydrocarbons have a cyclic structure with alternating double bonds that form a delocalized pi electron system known as an aromatic ring. Example: Benzene (C6H6).

To know more about carbon-carbon bonding, here

brainly.com/question/12156863

#SPJ4

many tests to distinguish aldehydes and ketones involve the addition of an oxidant. only choose... can be easily oxidized because there is choose... next to the carbonyl and oxidation does not require choose...

Answers

The tests to distinguish aldehydes and ketones involve the addition of an oxidant. This is because aldehydes can be easily oxidized because there is a hydrogen next to the carbonyl, and oxidation does not require a catalyst.

In general, aldehydes and ketones can be differentiated by the use of a wide range of chemical reagents. Tests for detecting these functional groups are usually based on their distinctive properties, such as the capacity to react with oxidizing agents or nucleophiles, which give different functional group products when they interact with aldehydes or ketones. Since these functional groups have differing properties, it is critical to employ distinct methods for their identification.

However, the use of oxidizing reagents to differentiate between aldehydes and ketones is one of the most frequent approaches. This is due to the presence of a hydrogen atom attached to the carbonyl group in aldehydes, which is readily oxidized by reagents such as Tollens' reagent (Ag2O/NH3) or Benedict's reagent (CuSO4 + NaOH). Hence, many tests to distinguish aldehydes and ketones involve the addition of an oxidant, this is because aldehydes can be easily oxidized because there is a hydrogen next to the carbonyl, and oxidation does not require a catalyst. Therefore, the third option is the only correct one.

Learn more about ketones at:

https://brainly.com/question/30665943

#SPJ11

How much ammonium chloride (NH4Cl), in grams, is needed to produce 2.5 L of a 0.5M aqueous solution?

Answers

The mass (in grams) of ammonium chloride, NH₄Cl needed to produce 2.5 L of a 0.5M aqueous solution is 66.88 grams

How do i determine the mass of ammonium chloride, NH₄Cl needed?

First, we shall determine the mole of ammonium chloride, NH₄Cl. Details below:

Volume = 2.5 LMolarity = 0.5 MMole of ammonium chloride, NH₄Cl =?

Molarity = Mole / Volume

Cross multiply

Mole of ammonium chloride, NH₄Cl = molarity × volume

Mole of ammonium chloride, NH₄Cl = 0.5 × 2.5

Mole of ammonium chloride, NH₄Cl = 1.25 mole

Finally, we shall determine the mass of ammonium chloride, NH₄Cl needed. Details below:

Mole of ammonium chloride, NH₄Cl = 1.25 moleMolar mass of ammonium chloride, NH₄Cl = 53.5 g/molMass of ammonium chloride, NH₄Cl =?

Mass = Mole × molar mass

Mass of ammonium chloride, NH₄Cl = 1.25 × 53.5

Mass of ammonium chloride, NH₄Cl = 66.88 grams

Therefore,  we can conclude that the mass of ammonium chloride, NH₄Cl is 66.88 grams

Learn more about mass:

https://brainly.com/question/21940152

#SPJ1

Which set correctly orders the atoms from HIGHEST to LOWEST ionization energy?

Answers

Answer:

Option D

Explanation:

Ionization energy increases left to right in a period and decreases top to bottom in a groups.

Ar is in Group 13

S is in Group 15

P is in Group 16

Al is in Group 18

They are all in the same period so decide by the group numbers if left is the highest (group 18) and right (group 13) is the lowest.

The order: Ar, S, P, Al

Hope this is clear. Good luck with chemistry! :)

rank the following alkyl halides in order of their increasing rate of reaction with triethylamine: iodoethane 1-bromopropane 2-bromopropane

Answers

Triethylamine is a weak base and an excellent nucleophile, that is, it is very reactive to electrophilic molecules such as alkyl halides. Triethylamine is a commonly used reagent in organic synthesis to promote alkylations, acylations, and nucleophilic substitutions.Therefore, the order of increasing rate of reaction with triethylamine is as follows: Iodoethane< 1-Bromopropane< 2-Bromopropane

As we know, the rate of a reaction with the nucleophile depends on the strength of the electrophilic carbon atom, which is in turn dependent on the bond dissociation energy of the C-X bond. The lower the bond dissociation energy, the easier it is to break the bond and the more reactive the alkyl halide is towards nucleophiles.

On the other hand, 2-Bromopropane, with the highest bond dissociation energy of C-Br bond, is the least reactive towards nucleophiles Therefore, the order of increasing rate of reaction with triethylamine is as follows: Iodoethane< 1-Bromopropane< 2-Bromopropane.

Know more about Triethylamine here:

https://brainly.com/question/6656927

#SPJ11

Please Help With this question, No.3

Answers

Answer: mass is 57(g)

Explanation:

Which of the following has the last electron added into the f orbital? Select the correct answer below: - main group elements
- transition elements
- inner transition elements - all of the above

Answers

Inner transition elements have the last electron added into the f-orbital. Thus, the correct option will be C.

What is an f-orbital?

An f-orbital is a central region of high electron probability density in an atom that may contain up to two electrons, depending on the energy and spin of the electrons. It has a more complex shape than s, p, and d orbitals.

In atoms, the f-orbital's quantum number is l = 3. It has seven orbitals in total. The 4f subshell includes the first six f-orbitals which are 4f, 4f1, 4f2, 4f3, 4f4, 4f5, while the 5f subshell includes the final seventh f-orbital (5f6). The electron configuration for an element or atom is determined by the number of electrons in each orbital.

The outermost electrons of a chemical element or atom are referred to as valence electrons. The number of valence electrons in an atom or element can be used to forecast the molecule's reactivity and the types of chemical bonds it can form.

Learn more about f-orbital here:

https://brainly.com/question/14944601

#SPJ11

2. Convert 3 moles of Ba(NO3)₂ to grams of Ba(NO3)2

Answers

Answer:

Explanation:

n = m / Mr

Atomic Mass :

Ba =137 ,327

N = 14,0067

O =15,9994

Mr[(Ba(NO3)2] =  137,327 + (14,0067+15,9994*3)*2 = 261,3368 g/mol

so for finding m[Ba(NO3)2] will take :

n = m / Mr

m = n * Mr

m =3 moles * 261,3368 g/moles

m = 784,01 grams

Water-cooled West condensers are typically used to condense solvent vapors while heating reactions under reflux. Select the proper inlet port for the coolant water Either port is acceptable to use as the inlet port. The bottom port is the proper inlet The top port is the proper inlet. Water should be introduced into the condenser through both ports simultaneously

Answers

The proper inlet port for the coolant water in a water-cooled West condenser is the bottom port.

The bottom port of the condenser is designed to be the inlet for the coolant water as it allows for proper flow and distribution of the water throughout the condenser. The top port is usually used for venting purposes and should not be used as an inlet port. It is important to introduce water into the condenser through the proper inlet port to ensure efficient cooling of the solvent vapors and to prevent any potential damage to the condenser.

To know more about coolants, here

brainly.com/question/31182856

#SPJ4

I've been stuck on this question​

Answers

According to the question the reaction A+B→C+D is exothermic.

What is reaction?

Reaction in chemistry is a process in which two or more substances interact to form a new substance. Chemical reactions involve the breaking of chemical bonds and the formation of new bonds. Chemical reactions are essential for the formation and breaking of molecules, and are responsible for the production of energy.

a) The reaction A+B→C+D is exothermic.

b) The AH for the forward reaction is the difference between the enthalpies of the products and the reactants. The AH for the backward reaction is the difference between the enthalpies of the reactants and the products.

c) X would represent the position of the activated complex on the graph.

d) The activation energy for the forward reaction is the difference between the enthalpies of the reactants and the activated complex. The activation energy for the backward reaction is the difference between the enthalpies of the products and the activated complex. The forward reaction is expected to be faster because it has a lower activation energy.

e) On the same set of axes, the graph would show a decrease in the activation energy with the use of a catalyst, resulting in a lower energy barrier and faster reaction rates.

To learn more about reaction

https://brainly.com/question/25769000

#SPJ1

for 280.0 ml of a buffer solution that is 0.225 m in hcho2 and 0.300 m in kcho2, calculate the initial ph and the final ph after adding 0.028 mol of n

Answers

The amount of salt in the buffer solution will rise by 0.028 mol since the added Na is a salt. The amount of acid present won't alter. Consequently, the finished pH of the As a result, the buffer solution's final pH may be determined as follows: pH = 4.74 + log((0.300 + 0.028)/0.225) = 5.11.

The Henderson-Hasselbalch equation, which asserts that pH = pKa + log([salt]/[acid]), may be used to determine the initial pH of a buffer solution. HCHO2 and KCHO2 have pKas of 4.74 and 9.31, respectively. Consequently, the following formula may be used to determine the buffer solution's starting pH: pH = 4.74 + log(0.300/0.225) = 4.98.

The buffer solution will become more basic as a result of the addition of hydroxide ions after adding 0.028 mol of Na. With the revised salt and acid concentrations, the Henderson-Hasselbalch equation may still be used to determine the buffer solution's ultimate pH.

Learn more about buffer solution  at:

https://brainly.com/question/31367305

#SPJ12

If a solution had a pOH of 7. 39 then it has a pOH of?

Answers

The relationship between pH, pOH, and the concentration of hydroxide ions in a solution is given by:

pH + pOH = 14

If a solution has a pOH of 7.39, we can find its pH by subtracting the pOH from 14:

pH = 14 - pOH

pH = 14 - 7.39

pH = 6.61

Therefore, the solution has a pH of 6.61.

The pH scale, which describes the connection between pH, pOH, and the quantity of hydroxide ions, is an essential concept in chemistry. A pH of 7 is regarded as neutral, whereas values below 7 are acidic and those over 7 are basic (also called alkaline).

learn more about , pOH here:

https://brainly.com/question/480457

#SPJ4

temperature decreasing is what causes the crystals to form on the wooden stick?

Answers

As the temperature drops, the sugar crystallizes because a supersaturated solution is unstable and contains more solute (in this case, sugar) than can remain in solution. The more molecules that link the sugar crystals at a low temperature, the more rock candy is formed.

Complete the synthesis by determining the set of reactions and the synthetic intermediate needed to convert the given alkyl halide to the primary amine. Drag the appropriate labels to their respective targets Hints NH HNNH2 1) HCrO 2) Hyo H2. Raney Ni H,NOH NaN3 excess NH NT trace acid DMF Br NH2

Answers

The synthetic intermediate required is [tex]HNNH_{2}[/tex]. The set of reactions required to convert the given alkyl halide to the primary amine is as follows; [tex]H_{2}[/tex], Raney Ni, then [tex]H_{2} 0[/tex], H+, heat, and finally Sn, HCl, and heat.

The synthesis needed to convert the given alkyl halide to the primary amine are as follows;Hydrogenation of the double bond, Hydrolysis of nitrile to primary amine  and Reduction of nitro group to aniline. The synthetic intermediate needed is HNNH2.

The set of reactions for the synthesis is as follows;

1. Hydrogenation of the double bond is done using [tex]H_{2}[/tex], Raney Ni.

2. Hydrolysis of nitrile to primary amine is done using [tex]H_{2} 0[/tex], H+, heat.

3. Reduction of nitro group to aniline is done using Sn, HCl, and heat.

So, the set of reactions required to convert the given alkyl halide to the primary amine is as follows;[tex]H_{2}[/tex], Raney Ni, then [tex]H_{2} O[/tex], H+, heat, and finally Sn, HCl, and heat. The synthetic intermediate required is [tex]HNNH_{2}[/tex].

More on organic chemistry synthesis: https://brainly.com/question/14098748

#SPJ11

Which can be excluded from the list of events caused by the flow of thermal energy inside the Earth? (1 point)

A. Volcanic eruptions

B. Earthquakes

C. Thunderstorms

D. Valley formations

Answers

Answer:

C. Thunderstorms

Explanation:

It is formed when three components: unstable weather conditions, uprising cold air, and enough moisture are present in the area. Based on the criteria for thunderstorms to form, it is not related to the flow of thermal energy inside the Earth.

Calculate the molarity (moles/L) of acetic acid in vinegar: Use the molar mass of acetic acid to convert your molarity value above to grams of acetic acid per mL Take this number times [00 to get & percent acetic acid in vinegar: (The result should be close to 5%.)

Answers

Calculating the molarity of acetic acid in vinegar:

Molarity (M) = (number of moles of solute) / (volume of solution in liters)

What is molar mass?

The molar mass is the same as mass number if it is only one element with no subscripts.

the mass of acetic acid in the vinegar will be determined first:

Mass = volume (L) × density (g/mL)

Mass = 1 L × 1.05 g/mL

Mass = 1.05 g/L

Then, the moles of acetic acid can be calculated using the molar mass of acetic acid:

Moles = mass (g) / molar mass

Moles = 1.05 g / 60.05 g/mol

Moles = 0.01748 mol

Acetic acid molarity = 0.01748 mol / 1 L

                                = 0.01748 M

Calculating the percentage of acetic acid in vinegar:

% acetic acid = (mass of acetic acid/volume of vinegar) × 100%

                     = (1.05 g / 100 mL) × 100%

                     = 1.05%

Therefore, the result of the calculation will be close to 1.05%, not 5%.

To know more about molarity:

https://brainly.com/question/19517011

#SPJ11

you conducted a tlc experiment and found that your compound traveled 4.01 cm and the eluting solvent traveled 9.29 cm. what is the rf value for your compound? report your answer to two decimal places (i.e., 0.01).

Answers

the Rf value for your compound is 0.43.

The Rf value of a compound is the ratio of the distance that the compound traveled to the distance that the solvent traveled.

Therefore, in the given situation where you conducted a TLC experiment and found that your compound traveled 4.01 cm and the eluting solvent traveled 9.29 cm

The Rf value for your compound can be calculated as follows:

Rf value = Distance traveled by the compound / Distance traveled by the solvent

Rf value = 4.01 cm / 9.29 cm

Rf value = 0.43 (rounded off to two decimal places)

Therefore, the Rf value for your compound is 0.43.

To know more about Rf value click here:

https://brainly.com/question/17132198

#SPJ11

If you have a solution of lead (II)nitrate and wish t prepare lead solid, what materials might you submerse into lead (II) nitrate solution? What is the half reaction involved?

Answers

To prepare lead solid, you would need to submerse a reducing agent such as aluminum or zinc into a solution of lead (II) nitrate. The half reaction involved is as follows:
Lead (II) Nitrate + Aluminum → Lead + Aluminum Nitrate

Explanation: 2Pb(NO3)2 + 2Al → 2Pb + 2Al(NO3)3
To prepare lead solid from a lead (II) nitrate solution, you can immerse a piece of solid zinc in the solution.What is Lead (II) nitrate?Lead (II) nitrate is a salt that is inorganic in nature. The salt is made up of one lead ion (Pb2+) and two nitrate ions (NO3-).The half reaction that is involved in this case is: Pb2+ + 2e- ⟶ PbThe above-mentioned reaction shows that the lead ions have been reduced to form lead solid.What is the process for immersing zinc into a lead (II) nitrate solution?When a piece of solid zinc is immersed in a solution of lead (II) nitrate, the following reaction takes place:Zn (s) + Pb(NO3)2 (aq) → Zn(NO3)2 (aq) + Pb (s)Solid lead gets produced as a result of the above reaction. The lead ions (Pb2+) in the lead nitrate solution get reduced to form solid lead when zinc is added to the solution.As a result, if you want to prepare lead solid from a lead (II) nitrate solution, you can immerse a piece of solid zinc in the solution. The half reaction involved is: Pb2+ + 2e- ⟶ Pb.

For more such questions on reducing agent

https://brainly.com/question/18370994

#SPJ11

Calculate the mass of a sphere of gold with a radius of 11.3 cm. (The volume of a sphere with a radius r is V = (4/3)πr3; the density of gold is 19.3 g/cm3.) Express the solution in grams and in scientific notation.

Answers

The mass of a sphere with a radius of 11.3 cm can be calculated using the equation M = V × ρ, where V is the volume of the sphere and ρ is the density of the material. The volume of a sphere with a radius r is V = (4/3)πr3 and the density of gold is 19.3 g/cm3, so we can calculate the mass of the gold sphere as:

M = (4/3)πr3 × 19.3 g/cm3 = (4/3) × 3.14 × 11.33 × 19.3 g/cm3

M = 8,683.29 g = 8.7 × 103 g (in scientific notation)

Read more about the topic of density:

https://brainly.com/question/1354972

#SPJ11

Consider the following compound: 8 N 5 2. 3. 4. Determine the oxidation number atoms (a) 1. (b) 6, and (c) 7, a.) b.) c.) What is the average oxidation number for carbon in this compound? Use the algorithm method with the formula, not the structure. Enter fractions in decimal form with at least 3 spaces after the decimal. e.g. if O.N. E. then enter 2.500. Evaluate

Answers

The oxidation number of atoms (a) 1. (b) 6, and (c) 7 are as follows:The oxidation number of atom 1 is +8,The oxidation number of atom 6 is +5,The oxidation number of atom 7 is -2.The average oxidation number for carbon in this compound is -1.875.

The algorithm method with the formula is used to determine the average oxidation number for carbon in the compound. The formula to calculate the oxidation state of carbon can be given as:

Oxidation state of carbon = (number of carbon atoms x oxidation state of carbon) / total number of atoms.The given compound 8 N 5 2.3.4 consists of 19 atoms, of which 8 are carbon atoms, 5 are nitrogen atoms, and 6 are hydrogen atoms.

The oxidation state of nitrogen is -3 in the compound, and the oxidation state of hydrogen is +1.Now, the oxidation state of carbon is calculated as follows:

Oxidation state of carbon = (8 × oxidation state of carbon) / 19

We are supposed to find the average oxidation number of carbon atoms. To do this, we sum up the oxidation numbers of all carbon atoms and divide the sum by the total number of carbon atoms.

Oxidation state of carbon = (5* -1 + 3* -2 + 6 * +1) / 8

Oxidation state of carbon = (-5 - 6 + 6) / 8

Oxidation state of carbon = -1.875

Thus, the average oxidation number for carbon in this compound is -1.875.

Learn more about oxidation number here:

brainly.com/question/29263066

#SPJ11

which one of the following molecules has the highest boiling point? you will explain why in the next question. responses 3-methoxy-1-propanol 3-methoxy-1-propanol 1,2-dimethoxyethane 1,2-dimethoxyethane 1,4-butanediol 1,4-butanediol 1,1-dimethoxyethane 1,1-dimethoxyethane 2-methoxy-1-propanol

Answers

The molecule with the highest boiling point is 1,4-butanediol. This is because of the presence of intermolecular hydrogen bonding. Thus, the correct option is C.

What is intermolecular hydrogen bonding?

A hydrogen bond is an intermolecular force that exists between a hydrogen atom bonded to a highly electronegative atom (like N, O, or F) and another highly electronegative atom in another molecule. Hydrogen bonding is a type of dipole-dipole interaction that occurs between molecules that have a permanent dipole.

The four molecules, 3-methoxy-1-propanol, 1,2-dimethoxyethane, 1,4-butanediol, and 2-methoxy-1-propanol, all have oxygen atoms that are capable of forming hydrogen bonds. In order to form a hydrogen bond, a hydrogen atom in one molecule must be bonded to an electronegative atom like oxygen or nitrogen, and another electronegative atom in a neighboring molecule must be present.

In this case, 1,4-butanediol has two -OH groups on the ends of the carbon chain that are capable of forming hydrogen bonds with neighboring molecules, resulting in a higher boiling point. Because of the presence of intermolecular hydrogen bonding, the molecules have stronger intermolecular forces that require more energy to break, resulting in a higher boiling point.

Therefore, the correct option is C.

Learn more about Boiling point here:

https://brainly.com/question/2153588

#SPJ11

Which of the following properties increase as you move from left to right across a period? Select all that apply.
A)Ionization energy
B)None
C)Electronegativity
D)Atomic radius

Answers

Ionization energy and Electronegativity increase as you move from left to right across a period.

A period is a row in the periodic table of elements. It consists of elements with a similar number of atomic orbitals. The table is arranged so that elements with the same number of valence electrons are located in the same group, making it easy to identify the properties of elements.

Ionization energy is the energy required to remove an electron from a neutral atom in its gaseous state.

Electronegativity is the measure of an atom's ability to attract electrons to itself.

As we move from left to right across a period, the effective nuclear charge increases, thus both ionization energy and electronegativity increase.

Therefore, the correct options are A)  Ionization energy and C) Electronegativity.

Learn more about the Periodic table here:

https://brainly.com/question/1173237

#SPJ11

Other Questions
tara is of the view that Alicia's perception is influenced by the language that she speaks but not completely determined by it. which of the following best illustrates Tara's view?Social Sciencethe qualified relativist positionRelativist position A system of equations is shown. 2x-y= 15 y=9 What is the value of x in the solution to this system? For this truss geometry:|/\|/\|/\|/\|Select one or more:a. The bottom chords do not usually need the verticals, since the bottom chords are not subjected to bending loads and the bottom chords only go into compression under severe wind suction that overcomes the dead weight of the structure.b. This is called a Modified Warren Truss.c. The vertical webs help brace the top chord against buckling upward and downward.d. The vertical webs help support parts of the top chord, thereby reducing the span, and associated bending stress, of the top chord under the uniform gravity force of the decking resting on the top chord of the truss.e. The unbraced length for the bottom chords is twice as long as the unbraced length for the top chords. essay on the immigration and migration in the early 20th century true or false: the nature and sensitivity of the microorganism and the overall medical condition of the patient need to be considered before antimicrobial treatment begins. Discuss 3 behavioral challenges that children who have trafficked may experience? A container holds 0.25 moles of oxygen gas. What is the volume of the container if the gas is at room temperature and pressure? A Nichrome wire 75 cm long and 0.25 mm in diameter is connected to a 1.7 volt flashlight battery.A) What is the electric field inside the wire?B) Next the Nichrome wire is replaced by a wire of the same length and diameter, and same mobile electron density but with electron mobility 4 times as large as that of Nichrome. Now what is the electric field inside the wire? At its core, science is about inquirythe act of asking questions and seeking answers. Most labs begin as the result of a question, and the pre-lab information of your lab report should include a question. For example, you may have noticed that you seem to play basketball better at the court in the park than you do at home in my driveway. After doing some thinking and research, you realize that the surface of the court at the park is different than your driveway. As a result, you might formula a scientific question, "What is the effect of the court surface on the height that the basketball bounces?" To answer this question scientifically, you could perform several experiments and gather data The diagram shows 3 identical circles inside a rectangle.each circle touches the other 2 circles and the side of the rectangle, as shown in the diagram.Radius of each circle is 28mm.work out the area of the rectangle.Give your answer correct to three significant figures Patents on inventions such as technological innovations help the economy by _________a. Allowing he government to make money from new inventionsb. Common propertyc. Providing government money for the developement of new productsd. Protecting intellectual property and fostering entrepreneurship determine the order of the three loci y, ec, and w, and estimate the distances between them on the linkage map of the x chromosome. Calculate the root mean square (rms) average speed of the atoms in a sample of neon gas at 0.17atm and 52.C . Round your answer to 3 significant digits. Rellenar el espacio. Fill in the blank with the missing vocabulary word to complete each sentence below. Do not capitalize or use punctuation, as itwill confuse the system.1. Me compraste un2. Nuestroen Mxico?4. Necesito comprar un---S, te compr una llavera." "keychainsale a las 6 de la maana. Llega a Baltimore a las 11:30.3. No me gusta nadar en el mar. Prefiero tomar el sol en la5. Estamos perdidos. Necesitamos comprar un. "sunbatheNo tengo el mo y mi celular no tiene cargo.de la ciudad. Which sentences contain noun clauses? Hannah, who was a straight-A Student, was disappointed when she got a B At the end of 2021, Marin Co. Has accounts receivable of $754,500 and an allowance for doubtful accounts of $23,960. On January 24, 2022, it is learned that the companys receivable from Madonna Inc. Is not collectible and therefore management authorizes a write-off of $4,624. A)Prepare the journal entry to record the write-off. (Credit account titles are automatically indented when amount is entered. Do not indent manually. )Account Titles and ExplanationDebitCreditEnter an account titleEnter a debit amountEnter a credit amountEnter an account titleEnter a debit amountEnter a credit amount(b)What is the cash realizable value of the accounts receivable before the write-off and after the write-off?Before Write-OffAfter Write-OffCash realizable value$Enter a dollar amount$Enter a dollar amount 1.Fill in the code to complete the following method for checking whether a string is a palindrome.public static boolean isPalindrome(String s) {return isPalindrome(s, 0, s.length() - 1);}public static boolean isPalindrome(String s, int low, int high) {if (high The university president believes that increasing student tuition by 5% will increase revenues. If the president is correct that revenues will increase, then the tuition increase will: A) reduce the number of students enrolling by less than 5%. B) reduce the number of students enrolling by more than 5%. C) reduce the number of students enrolling by exactly 5%. increase the number of students enrolling by 5%. please help with finding the answer Which points satisfy both inequalities?