Calculate the root mean square (rms) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C . Round your answer to 3 significant digits.

A chemical substance or natural product known as a lead compound has biological action against a pharmacological target.

A critical phase of the drug discovery program is lead identification and optimization.

There are two main oxidation states for compounds containing lead: +2 and +4. The first is more typical. Strong oxidants or only occurring in extremely acidic conditions are typical characteristics of inorganic lead(IV) compounds.

The percent yield equation is:

percent yield = actual yield/theoretical yield x 100%

The ratio of the actual yield to the theoretical yield multiplied by 100 is the percent yield.

Characterizing natural products, using combinatorial chemistry, or using molecular modeling as in rational drug design are methods for finding lead compounds. Lead compounds can also be made from substances that high-throughput screening identified as hits.

To know about yield

https://brainly.com/question/2506978

#SPJ4

The number of moles of NaOH used in this titration of a 25.00 ml monoprotic strong acid solution is 0.0007919 moles.

In order to find out the number of moles of NaOH used in a titration, we can use the formula:

moles of NaOH = concentration of NaOH × volume of NaOH used in titration

Given:Volume of monoprotic strong acid solution = 25.00 mL

Concentration of NaOH = 0.09014 M

Volume of NaOH used in titration = 8.781 mL

We can convert mL to L by dividing it by 1000. So,Volume of monoprotic strong acid solution = 25.00 mL = 25.00/1000 L = 0.02500 L

moles of NaOH = concentration of NaOH × volume of NaOH used in titration= 0.09014 M × 8.781/1000 L= 0.0007919 moles of NaOH

Hence, the number of moles of NaOH used in this titration is 0.0007919 moles.

More on titration: https://brainly.com/question/15568269

#SPJ11

In contrast to C3 plants, C4 plants have a different leaf structure and metabolic process. Carbon dioxide is first fixed in mesophyll cells of C4 plants.

where it is then transported to bundle sheath cells where it is broken down to release CO2 for the Calvin cycle. The key distinction between C4 and C3 plants is the division of carbon fixation and the Calvin cycle into various cells. C4 plants are more common in arid and semi-arid areas because they are more effective at photosynthesis in hot and dry conditions. In a typical C4 plant, the Calvin cycle and the first fixation of carbon dioxide take place in separate cells, the mesophyll cells, and the resulting four-carbon molecule is then transported to the bundle sheath cells in a C3 plant.

learn more about photosynthesis here:

https://brainly.com/question/29764662

#SPJ4

The change that is useful for the environment and living things is called "positive environmental change."

Positive environmental change refers to any alteration or modification in the environment that improves or benefits living organisms' well-being. Examples of positive environmental changes include reducing pollution, conserving water, using renewable energy sources, and recycling waste products. Positive environmental change is essential to ensure a sustainable future and to maintain the planet's biodiversity.

It can be achieved by implementing new policies, practices, and technologies that promote sustainable development and reduce the negative impact on the environment. Positive environmental change can also help to address climate change and other environmental challenges faced by humanity. By taking positive steps to protect the environment, we can ensure that future generations can also enjoy a healthy, prosperous, and sustainable planet.

To learn more about positive environmental change, here

https://brainly.com/question/30033700
#SPJ4

The statement "the procedure for making zeolite is carried out in an acidic medium" is False.

Zeolite is a crystalline aluminosilicate mineral that occurs naturally.

It is widely used in various applications, including water purification, agriculture, and petrochemical refining.

Zeolites can be synthesized in the laboratory using different methods, such as hydrothermal and sol-gel methods.

The zeolite synthesis process is carried out in an alkaline or basic medium, not in an acidic medium.

Alkaline solutions, such as sodium hydroxide or potassium hydroxide, are commonly used to initiate the synthesis reaction, which involves the reaction of a source of silica, such as silicate, with a source of alumina, such as aluminate, in the presence of water and other chemical agents.

There are various types of zeolites with different chemical compositions, crystal structures, and properties.

The specific synthesis conditions, such as temperature, pressure, and reaction time, can also affect the final properties of the zeolite.

Therefore, the synthesis of zeolites requires precise control of the reaction conditions to obtain the desired properties.

Zeolites have a unique structure that can adsorb and exchange ions and molecules.

This property makes them useful in various applications, such as catalysis, separation, and ion exchange.

Zeolites can also be modified or functionalized to enhance their properties for specific applications.

For similar question on zeolite.

https://brainly.com/question/14976531

#SPJ11

Each reaction's Lewis acid and Lewis base are as follows:

AlCl3 is the Lewis acid in the reaction, whereas Cl- is the Lewis base. F- is the Lewis base and BF3 is the Lewis acid in the reaction Cl- + AlCl3 --> AlCl4- BF3 + F- --> BF4-

The Lewis base in this reaction is NH3, and the Lewis acid is H+. NH3 + H+ --> NH4+

Explanation: A Lewis acid acts as an electron pair acceptor in a Lewis acid-base reaction, whereas a Lewis base acts as an electron pair donor. In the initial reaction, Cl- provides AlCl3 with a pair of electrons, which AlCl3 accepts to produce AlCl4-. As a result, AlCl3 is the Lewis acid and Cl- is the Lewis base. In the subsequent response, F- provides two pairs. BF3 takes the electrons and transforms them into BF4-. Hence, the Lewis bases are F- and BF3, respectively. In the third reaction, H+ absorbs a pair of electrons from NH3 and forms NH4+ as a result. As a result, the Lewis bases are NH3 and H+.

learn more about Lewis acid  here:

https://brainly.com/question/15570523

#SPJ4

During the relative refractory period of the action potential, the axolemma is more permeable to potassium ions.

Axolemma refers to the plasma membrane that surrounds an axon. It is a lipid bilayer that is semipermeable, meaning that it only permits certain molecules and ions to pass through. The action potential is a temporary change in the electrical potential that travels along the axon of a neuron. An action potential is generated when the axon is depolarized, causing a brief, rapid reversal of the polarity of the axolemma. This reversal of polarity triggers the release of neurotransmitters from the axon terminal into the synaptic cleft.

When an action potential is generated, the axolemma becomes more permeable to ions. During the relative refractory period, which is the period immediately following an action potential, the axolemma is more permeable to potassium ions. This increased permeability is due to the opening of voltage-gated potassium channels in the axolemma, which allows potassium ions to move out of the cell.

The relative refractory period is a time when it is harder to generate another action potential in the axon. This is because the threshold for depolarization is higher due to the increased permeability of the axolemma to potassium ions. However, it is still possible to generate another action potential if the stimulus is strong enough to overcome the increased threshold.

Learn more about Relative refractory period here:

https://brainly.com/question/30460363

#SPJ11

When scientists first discovered that atoms were composed of smaller particles, such as electrons, protons, and neutrons, they did not reject atomic theory because the experimental evidence supported the idea that atoms were still the fundamental building blocks of matter.

Instead of rejecting atomic theory, scientists modified it to incorporate the new information about the structure of atoms. For example, Ernest Rutherford's famous gold foil experiment in 1911 showed that atoms had a small, positively charged nucleus at their center, which was surrounded by negatively charged electrons.

This discovery led to the development of the modern model of the atom, which is still based on the idea that atoms are the smallest units of matter that retain the properties of an element. However, the model has been updated to reflect our current understanding of the subatomic particles that make up atoms.

To know more about atomic theories, here

brainly.com/question/28853813

#SPJ4

Triacylglycerol is broken down by the enzyme lipase into fatty acids and glycerol. It is released by the pancreas and other digestive organs and is essential to the body's ability to digest and absorb fats.

Lipase is the enzyme that converts triacylglycerol into fatty acids and glycerol. The pancreas and other digestive organs release lipase, which is essential for the breakdown and absorption of fats in the body. Triacylglycerols are a kind of lipid that is frequently present in meals including meat, dairy goods, and oils. The triacylglycerol molecule's fatty acid ester linkages are hydrolyzed by lipase, releasing the molecules' separate fatty acids and glycerol. The body's cells can utilize these smaller parts for energy or store them as fat when they are absorbed into the circulation and delivered there. Other lipids, including phospholipids and cholesterol esters, are also broken down by lipase. and is essential for maintaining proper lipid metabolism and homeostasis in the body.

learn more about Triacylglycerol here:

https://brainly.com/question/29697122

#SPJ4

The compound that is a non-electrolyte when dissolved in water is CCl4.

When CCl4 dissolves in water, it does not break down into ions, and it does not conduct electricity.What is an electrolyte?An electrolyte is a compound that dissolves in water, and its solution conducts electricity due to the presence of ions. A compound must dissociate in water to produce ions to be considered an electrolyte. The ions can move freely through the solution, allowing for the conduction of electricity.There are three types of electrolytes: strong electrolytes, weak electrolytes, and nonelectrolytes. Strong electrolytes dissociate fully into ions in water and conduct electricity very efficiently. Weak electrolytes only partially dissociate, and they conduct electricity less efficiently than strong electrolytes.Nonelectrolytes are substances that do not dissolve in water or dissolve but do not dissociate into ions. Because they do not have ions, they do not conduct electricity. CCl4 is a nonelectrolyte, as it does not produce any ions when it dissolves in water.

For more such questions on Non-electrolyte

https://brainly.com/question/15291583

#SPJ11

Answer:

Characteristics of matter change due to chemical changes, not physical ones. Physical properties can be determined without changing the substance's chemical identity

Explanation:

At 31.52° Celsius temperature will argon have a density of 10.3 g/L and a pressure of 6.43 atm . This is given by ideal gas law.

An ideal gas is a theoretical gas composed of many randomly moving point particles that do not interact with one another. The ideal gas concept is useful because it obeys the ideal gas law, which is a simplified equation of state, and is amenable to statistical mechanics analysis. The requirement of zero interaction is frequently relaxed if the interaction is perfectly elastic or regarded as point-like collisions, for example. When intermolecular forces and molecular size become important, the ideal gas model tends to fail at lower temperatures or higher pressures. It also fails for most heavy gases, including many refrigerants,[2] as well as gases with strong intermolecular forces, most notably water vapor. At high pressures, the volume of a real gas is frequently much larger than that of a pure gas.

using the formula

P × M = d × R × T

Where P = pressure = 6.43 atm

m= molar mass = 40 g

d = density = 10.3 g/L

T = temperature

R = 0.082057 L atm K⁻¹ mol⁻¹

solving for T ,

T = 31.52°C

To know more about ideal gas , visit ;

brainly.com/question/28257995

#SPJ1

Phosphorylation of either of the terminal hydroxyl groups of glycerol will create b. L-glycerol-1-phosphate.

Glycolysis is a metabolic pathway in which glucose is broken down into two pyruvates in the presence of oxygen. Glycerol is a molecule that serves as a precursor to triacylglycerols and phospholipids. Glycerol, which is a 3-carbon molecule, is broken down into dihydroxyacetone phosphate and glyceraldehyde 3-phosphate in the glycolysis pathway.

The structure of glycerol comprises of two terminal hydroxyl groups, -OH, on carbons 1 and 3 of glycerol are the primary alcohol groups. These groups can be phosphorylated by a kinase enzyme to produce two different phosphates: L-glycerol-1-phosphate or D-glycerol-3-phosphate.

Phosphorylation of either of the terminal hydroxyl groups of glycerol will create L-glycerol-1-phosphate. This molecule is a phosphoric acid ester of glycerol that is classified as a glycerophosphate. Phosphorylation of the 1-hydroxyl group produces L-glycerol-1-phosphate, whereas phosphorylation of the 3-hydroxyl group produces D-glycerol-3-phosphate.

Therefore, the phosphorylation of either of the terminal hydroxyl groups of glycerol will create L-glycerol-1-phosphate.

To know more about phosphorylation click here:

https://brainly.com/question/15585148

#SPJ11

The standard enthalpy of formation of TiCl₄ (I) is -750kJ mol ⁻¹. The correct answer for the given reaction of Titanium tetrachloride is thus option C.

The standard enthalpy of formation (ΔH°f) is the modification in enthalpy that happens when one mole of a substance is formed from its component elements in their standard states under standard conditions of temperature and pressure (298 K and 1 atm pressure).

To determine the standard enthalpy of formation for TiCl₄ (I), we need to use Hess's law and combine the given reactions in a way that cancels out all the other reactants and leaves only  TiCl₄ (I) as the product. We can achieve this by reversing the first equation and adding it to the second and third equations:

Ti(s) + 2Cl₂(g) + 2CO₂(g) →  TiCl₄ (l) + 2CO₂(g) + 2Cl₂(g) ∆H = +232 kJ mol⁻¹

Ti(s) + O₂(g) → TiO₂(s) = −912 kJ mol⁻¹

C(s) + O₂(g) → CO₂(g) = −394 kJ mol⁻¹

Now, we can cancel out the CO₂(g) and Cl₂(g) on both sides and simplify the equation to:

Ti(s) + 2Cl₂(g) + C(s) →  TiCl₄ (I)  ∆H = +232 kJ mol⁻¹ - 2(-394 kJ mol⁻¹) - 912 kJ mol⁻¹ = -750 kJ mol⁻¹

Therefore, the correct value for the standard enthalpy of formation for TiCl₄ (I) is -750 kJ mol⁻¹.

To find out more about standard enthalpy of formation, visit:

https://brainly.com/question/30264187

#SPJ1

Answer:

In chemical kinetics, the rate constant (k) is a proportionality constant that relates the rate of a chemical reaction to the concentrations of the reactants. It is often included in the rate law equation, which expresses the relationship between the rate of the reaction and the concentrations of the reactants.

However, the rate constant is not truly constant because it can vary with different experimental conditions. The rate constant is affected by factors such as temperature, pressure, and the presence of catalysts or inhibitors. For example, an increase in temperature usually leads to an increase in the rate constant, while the addition of a catalyst can decrease the activation energy and increase the rate constant.

Two specific examples that support this statement are:

1) The effect of temperature on the rate constant: Consider the reaction A → B, which has a rate law equation of rate = k[A]. If the temperature is increased, the rate constant will increase due to the increase in kinetic energy of the reactant molecules. This means that the reaction will proceed faster at higher temperatures, even if the concentration of A remains the same.

2) The effect of catalysts on the rate constant: Consider the reaction C + D → E, which has a rate law equation of rate = k[C][D]. If a catalyst is added to the reaction, it can increase the rate constant by providing an alternate pathway with a lower activation energy. This means that the reaction will proceed faster at the same concentrations of C and D with the catalyst present than without it.

Explanation:

The correct answer is B) Urea. Urea is a waste product of protein metabolism, and is released from the body through sweat, where the ammonia and other waste products form urea.

Lysozymes are enzymes that are naturally produced in most living organisms. They are responsible for helping to break down peptidoglycan, a substance found in the cell walls of various bacteria. This helps to prevent bacterial growth and spread, as well as helping to keep the cells intact. Lysozymes are also known to act as an antimicrobial agent, helping to destroy the cell walls of some types of bacteria.

Sebum is an oily substance produced by the sebaceous glands of the skin. The sebaceous gland is located in the hair follicles and it is responsible for secreting the sebum. Sebum production is regulated by hormones and usually occurs when the body needs more moisture (such as during puberty). Sebum can act as a barrier to protect the skin and prevent it from drying out. It helps to keep the skin hydrated, soft and supple. In addition, it helps to reduce bacterial buildup on skin. Sebum is also responsible for giving skin its natural glow.

To know more about Lysozymes, visit:

https://brainly.com/question/29829618

#SPJ1

The chemical that the brain produce that makes people feel good when they exercise is dopamine and endorphins.

Endorphins are any of a group of peptide hormones found in the brain that act as neurotransmitters and have properties similar to morphine.

A neurotransmitter is any substance, such as acetylcholine or dopamine, responsible for sending nerve signals across a synapse between two neurons.

When you exercise, your body releases chemicals such as dopamine and endorphins in your brain that make you feel happy.

Learn more about endorphins at: https://brainly.com/question/28138527

#SPJ1

The principles that underlie balancing chemical equations include the law of conservation of mass and the concept of stoichiometry.

The law of conservation of mass states that matter can neither be created nor destroyed in a chemical reaction, meaning that the total mass of the reactants must be equal to the total mass of the products. This principle requires that the number of atoms of each element on the reactant side of the equation must be equal to the number of atoms of that element on the product side. The concept of stoichiometry involves using the balanced equation to determine the quantitative relationships between the reactants and products, including the amounts of each substance involved in the reaction.

To know more about stoichiometry, here

brainly.com/question/9743981

#SPJ4

--The complete question is, The principles that underlie balancing chemical equations include the______________ and the concept of stoichiometry. ---

Answer:Superfatting is done for two reasons. The first is that extra oils add more moisturizing qualities to your soap (sometimes referred to as emollients). The second is that the common 5% superfatting allows you to a bit more leeway with your lye.

Explanation:What Are the Benefits of Using Excess Fat to Make Soap?

Written by Mustiin Soap

Handcrafted soaps with a little touch of essential oils and sweet, subtle fragrances can offer you a powerful bathing experience. While aroma enriches your mind, the excess fats, on the other hand, are the ones that enhance the overall impact on your skin. Whether made by a hot or cold process, adding fats is essential.

Adding excess fat or superfatting of soap benefits the soap’s moisturizing ability. Another significant benefit is its compatibility with the skin’s pH. As the soap has a pH of about 9.5, and the skin’s pH varies between 4.5-6. Superfatting is used to make the soap more skin-friendly.

The theoretical yield of the solid product FeCO₃ in the reaction here is 18.18 grams. This is because, FeCl₂ is a limiting agent.

The precipitation reaction occurring between iron (II) chloride, FeCl₂ and potassium carbonate K₂CO₃

The Molecular equation is given below: FeCl₂ + K₂CO₃ → FeCO₃ + 2KCl

The Complete Ionic equation is given below: Fe₂⁺ + 2Cl⁻ + 2K⁺ + CO₃²⁻ → FeCO₃ + 2K⁺ + 2Cl⁻

The Net Ionic equation is given below: Fe²⁺ + CO₃²⁻→ FeCO₃

Molar mass of FeCl₂ = 126.75 g/mol

Molar mass of K₂CO₃ = 138.21 g/mol

n(FeCl₂) = mass/Mr = 20/126.75 = 0.1578 m

n(K₂CO₃) = mass/Mr = 25/138.21 = 0.1808 m

Therefore, FeCl₂ is the limiting agent. The theoretical yield of FeCO₃ can be calculated as follows: FeCl₂ + K₂CO₃ → FeCO₃ + 2KCl

1 mole of FeCl₂ produces 1 mole of FeCO₃

Moles of FeCO₃ produced = 0.1578 mol

FeCO₃ molar mass = 115.86 g/mol

Mass of FeCO₃ produced = 0.1578 mol × 115.86 g/mol = 18.18 g

Thus, the theoretical yield of the solid product FeCO₃ is 18.18 g.

Learn more about Theoretical yield here:

https://brainly.com/question/14966377

#SPJ11

Using the following formula, the total cell potential, Ecell, may be calculated:   Ecathode + anode equals Ecell. where Ecathode is the cathode half-reduction reaction's potential and Eanode.

We can determine the minimal Eanode needed to create a cell potential of 0.90 V since the engineer suggests employing a half-reaction with EPod = -0.75 V at the cathode:

Ecathode + anode equals Ecell.

Eanode: 0.90 V = -0.75 V

Eanode = 0.75 0.90 volts

Eanode equals 1.65 V.

The half-reaction employed at the anode must thus have a standard reduction potential of -1.65 V or less.

The typical reduction potential of the half-reaction utilised at the anode, on the other hand, has no upper limit. Yet, a higher Ecell and a more effective galvanic cell would be produced by a larger reduction potential at the anode.

We can utilise the half-reaction to create a balanced equation for the anode half-reaction:

Cu(s) becomes Cu2+(aq) plus 2e-

learn more about  half-oxidation reaction's potential.here:

https://brainly.com/question/23302600

#SPJ4

The heat transfer during the combustion of n-octane gas (C8H18) with 95% excess air in a constant pressure burner is 37039 kJ/kg fuel. This is calculated using the enthalpy of the formation of the products and reactants. The air and fuel enter the burner steadily at standard conditions, and the products of combustion leave at 265°C.

The enthalpy of combustion of the fuel is determined by subtracting the enthalpy of formation of the reactants from the enthalpy of formation of the products. The enthalpy of formation of the reactants is determined by multiplying the standard enthalpy of formation for each compound in the reaction by the number of moles of each compound and adding the result.

The enthalpy of formation of the products is determined by multiplying the standard enthalpy of formation for each compound in the reaction by the number of moles of each compound and adding the result. The heat transfer during combustion is then determined by subtracting the enthalpy of formation of the reactants from the enthalpy of formation of the products, resulting in 37039 kJ/kg fuel.

The heat transfer during the combustion of n-octane gas (C8H18) can be calculated using the formula Q = m × Cp × ΔT. Here, m is the mass of the fuel burnt, Cp is the specific heat capacity, and ΔT is the change in temperature. Let's substitute the given values: Mass of fuel burnt = 1 kg (since 37039 kJ/kg fuel is given)Cp of n-octane gas = 2.22 kJ/kg/K (given)ΔT = (265 - 25) = 240 K (since the temperature of products is given as 265°C = 538 K and standard temperature is 25°C = 298 K)Therefore, the heat transfer during combustion of n-octane gas is: Q = m × Cp × ΔT = 1 × 2.22 × 240 = 532.8 kJAnswer: The heat transfer during this combustion is 532.8 kJ.

For more information follow the link: https://brainly.com/question/14754029

#SPJ11

A physical and mental impairment resulting from the use of alcohol is called Alcohol Use Disorder (AUD).

AUD is a chronic disease characterized by a preoccupation with alcohol, increased tolerance to it, and physical dependence on it. Symptoms include intense cravings, withdrawal, and a loss of control over drinking. Long-term effects of AUD include liver damage, poor mental and physical health, and an increased risk of developing certain types of cancer. Treatment for AUD often involves therapy and medication to help with withdrawal symptoms, cravings, and the physical and mental impairments resulting from the use of alcohol.

For more questions on Alcohol Use Disorder

https://brainly.com/question/28286542

#SPJ11

A sense strand is the mRNA strand that is translated from a DNA strand with a same nucleotide sequence. the codons have specific functions when the mRNA sequence is translated into a protein.

The DNA sequence serves as a template for the synthesis of a complementary mRNA molecule during transcription. The nucleotide arrangement of the DNA template strand dictates the sequencing of the mRNA. The mRNA sequence is not identical to the template DNA strand; rather, it is complementary to it. RNA polymerase, which builds the mRNA molecule on the DNA template strand, adds complementary RNA nucleotides to the lengthening mRNA chain. Since RNA nucleotides have uracil (U) as a base instead of thymine (T), the mRNA sequence will have the same nucleotide sequence as the DNA template strand. The mRNA sequence is read in groups of three nucleotides called codons, and the codons have specific functions when the mRNA sequence is translated into a protein.

learn more about nucleotide here:

https://brainly.com/question/16308848

#SPJ4

Glucose has a molecular weight of 180.18 g/mol, while hydrogen has an atomic weight of 1.008 g/mol. As a result, glucose has a mass-based hydrogen content of around 7.48%.

With the molecular formula C6H12O6, or six carbon atoms, twelve hydrogen atoms, and six oxygen atoms, glucose is a simple sugar. The atomic weights of glucose's component atoms may be added to determine its molecular weight, which is 180.18 g/mol. We must ascertain the mass of the hydrogen atoms contained in one mole of glucose in order to calculate the proportion of hydrogen by mass in glucose. Twelve hydrogen atoms have a mass of 12.096 g/mol because their atomic weight is 1.008 g/mol. Hence, based on mass, glucose has a hydrogen concentration of approximately 7.48% (12.096/180.18 x 100%).

learn more about hydrogen here:

https://brainly.com/question/28937951

#SPJ4

The amount of iodosalicylamide synthesized in the reaction performed by Edward by using 0.97 g of salicylamide will be about 2.87 grams.

Iodosalicylamide is synthesized by reacting salicylamide and sodium iodide in the presence of an oxidant. Iodosalicylamide is used as a reagent to detect the presence of oxidizing agents.

To find the mass of iodosalicylamide produced, we must first determine the limiting reagent for the reaction. The limiting reagent is the one that is consumed entirely, preventing the reaction from continuing even though the other reactants are present. The limiting reagent is the one that produces the least amount of product.

Moles of salicylamide:

moles = mass / molar mass = 0.97 g / 137.14 g/mol = 0.00708 moles

Moles of sodium iodide:

moles = mass / molar mass = 1.63 g / 149.89 g/mol = 0.0109 moles

Since iodosalicylamide is formed in a 1:1 ratio with the limiting reagent, sodium iodide, the limiting reagent is sodium iodide. Therefore, the theoretical yield of iodosalicylamide is the same as the moles of sodium iodide used.

Moles of iodosalicylamide = 0.0109 mol

Mass of iodosalicylamide = moles × molar mass = 0.0109 mol × 263.03 g/mol = 2.87 g

Therefore, the mass of iodosalicylamide that would be formed, assuming 100% yield, is 2.87 g, rounded to two decimal places.

Learn more about Iodosalicylamide here:

https://brainly.com/question/24215415

#SPJ11

Answer:

2,1,1  

Explanation:

(a) The pH of pure water is 7, which is neutral. (b) The universal indicator would show a yellow color in an aqueous solution of sugar, because sugar is a neutral compound with a pH of 7.(c) The pH of the rain water is likely around 5 or 6, which indicates a weak acid.

pH is less than 7 since yellow color indicates acidic rainwater. Rainwater has an acidic pH because it dissolves atmospheric carbon dioxide (CO2), sulfur dioxide (SO2), and nitrogen oxides (NOx), forming weak carbonic, sulfuric, and nitric acids.

Rainwater that has a pH below 5.6 is considered to be acid rain. Therefore, the acid present in rainwater is a weak acid because the pH of the rainwater is above 1.

Learn more about pH here:

brainly.com/question/15289741

#SMJ11

a.) The stressor that causes high concentrations of abscisic acid to travel from the roots to the shoot is drought.

An essential element of a plant's reaction to abiotic stress, particularly drought, is played by the hormone abscisic acid (ABA). Drought causes plants to create large amounts of ABA, which is then transferred from the roots to the shoot. Many physiological reactions result from this, including the closing of stomata, which lowers water loss through transpiration, and the activation of genes that encourage the manufacture of proteins that shield cells from dehydration-related cell damage. In addition, ABA causes inhibition of root development, which enables roots to sever deeper layers of soil in quest of water. In general, ABA production and transport play a key role in how plants manage drought stress and keep their water balance.

learn more about abscisic acid here:

https://brainly.com/question/13800529

#SPJ4

HNO3 and HBr can also be used instead of the provided acids (h2so4 and h3po4) to isolate solid copper in this experiment. Solid copper can be isolated by reacting it with acid. This is achieved in two stages: stage one, where copper reacts with sulfuric acid to produce copper sulfate and hydrogen gas, and stage two, where copper sulfate is reduced to copper using hydrogen gas.  

Therefore, in part b of the experiment, H2SO4 and H3PO4 are used. HNO3 and HBr can also be used instead of H2SO4 and H3PO4 to isolate solid copper. H2S and H2CO3 cannot be used as the acids to isolate solid copper. 'Hence, the correct options are : HNO3 and HBr Therefore, both HBr and HNO3 could be used in place of the acids (H2SO4 and H3PO4) to isolate solid copper in part b of this experiment.

Know more about sulfuric acid here:

https://brainly.com/question/1107054

#SPJ11