Which points satisfy both inequalities?

Answer:

120

Step-by-step explanation:

20 percent of 600 is 120 so he will get 120

In attempts to reduce greenhouse gas emissions and the effects of climate change, these sources must be taken into account.

A mathematical equation is a claim that two expressions are equal, typically represented with an equal sign (=) between them. The terms "left hand side" (LHS) and "right hand side" (RHS) of the equation, respectively, refer to the expressions on either side of the equal sign. Equations are a common tool for problem solving because they may be used to depict relationships between variables or quantities and to determine the value(s) of the unknown variable(s) that satisfies the equation. For instance, the link between the variables x and the integers 2, 5, and 11 is represented by the equation 2x + 5 = 11. Finding the value of x that makes the left and right sides of the equation equal is necessary to solve this equation.

given

A) Rice farming operations release methane into the atmosphere.

B) Methane is created when cows break down cellulose anaerobically.

E) Methane is released into the atmosphere when landfill material decomposes anaerobically.

Any of the aforementioned behaviours would raise the atmospheric methane concentrations and may have an impact on climate change globally.

Methane is a greenhouse gas that causes the atmosphere of the Earth to warm.

It is produced by both natural and artificial processes. Examples of human activities that contribute to methane emissions into the atmosphere include the production of rice, cattle digestion, and landfill decomposition.

In attempts to reduce greenhouse gas emissions and the effects of climate change, these sources must be taken into account.

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

Answer:

Here, x represents the amount (in liters) of the 25% saline solution to be added.

We can see that the 25% saline solution needs to be mixed with the 10% saline solution to obtain a mixture that is 15% saline. The ratio of the volumes of the 25% and 10% solutions can be found by subtracting the concentrations of the two solutions and dividing by the difference between the desired concentration and the concentration of the 10% solution:

x / (3.33 - x) = (15 - 10) / (25 - 10) = 5/15 = 1/3

Multiplying both sides by 3.33 - x, we get:

x = (1/3) (3.33 - x)

Multiplying both sides by 3, we get:

3x = 3.33 - x

Solving for x, we get:

x = 0.833 liters

Therefore, 0.833 liters of the 25% saline solution must be added to 3.33 liters of the 10% saline solution to obtain 4.163 liters of a 15% saline solution.

Step-by-step explanation:

1.4m/s is the rate that Roberto is walking. We know the formula for calculating the time i.e. t= d/r.

The term "distance" refers to how far we move. The rate is a measurement of our trip speed. Time is measured by how far we travel. The distance an object will travel over time and at a specific average rate is the subject of rate problems.

Given,

Distance = D

D= 1.4t

Rate= ?

Substituting the given values in the formula t= d/r

where,

t= time in seconds

d= distance

r= rate

We get,

t= 1.4t/r

t/1.4t= 1/r

t gets cancelled

so we have,

1/1.4= 1/r

r= 1.4m/s

Therefore, 1.4m/s is the rate at which Roberto is walking.

Learn more about Rate here: brainly.com/question/29781084

#SPJ4

The complete question is as follows:

Roberto is walking. The distance, D, in meters, he walks can be found using the equation D=1. 4t, where t is time in seconds.

What is the rate that Roberto's walking in meters per second?

Answer:

Step-by-step explanation:

2(-4) - 3(-2) = -2

 -8 + 6 = -2

   -2 = -2

The fraction and ratio that complete the equations in its simplest term is 5/6k and 2 : 9 respectively.

h : k = 5 : 6

h/k = 5/6

cross product

h × 6 = k × 5

6h = 5k

divide both sides by 6

h = 5/6k

Then,

2x = 9y

2/9 = x/y

2 : 9 = x : y

Ultimately, the simplest form of fraction and ratio which completes the equation is 5/6k and 2:9.

Read more on ratio:

https://brainly.com/question/2328454

#SPJ1

77 is the value of Q in linear equation.

What in mathematics is a linear equation?

A linear equation is an algebraic equation of the form y=mx+b, where m is the slope and b is the y-intercept, and only a constant and a first-order (linear) term are included. The variables in the previous sentence, y and x, are referred to as a "linear equation with two variables" at times.  

                                   Equations with power 1 variables are known as linear equations. One example with only one variable is where ax+b = 0, where a and b are real values and x is the variable.

P ∝ 1/Q

PQ = K

AT P= 11

Q = 28

11 * 28 = K

K = 308

AT P = 4

4Q = 308

Q = 77

Learn more about linear equation

brainly.com/question/11897796

#SPJ1

Answer: 50x - 27

Step-by-step explanation:

To find the 8th term of the arithmetic sequence, we need to first find the common difference between consecutive terms:

Common difference (d) = second term - first term

d = (8x - 3) - (x + 1)

d = 7x - 4

Now, we can use the formula to find the nth term of an arithmetic sequence:

an = a1 + (n - 1)d

where a1 is the first term, d is the common difference, and n is the term number we want to find.

Plugging in the values, we get:

a8 = (x + 1) + (8 - 1)(7x - 4)

a8 = x + 1 + 7(7x - 4)

a8 = x + 1 + 49x - 28

a8 = 50x - 27

Therefore, the 8th term of the arithmetic sequence x + 1, 8x - 3, 15x - 7 is 50x - 27.

Answer:

Step-by-step explanation:

Answer:

52.17%

Step-by-step explanation

[tex]\frac{12000}{23000}[/tex] ×100%

[tex]\frac{1200}{23}[/tex]

52.17

The largest possible whole-number length for the third side is 18, which satisfies all three inequalities.

The triangle inequality theorem explains the relationship between the three sides of a triangle. This theorem states that for any triangle, the sum of the lengths of the first two sides is always larger than the length of the third side.

Let x be the length of the third side. By the triangle inequality, we have:

3 + 16 > x and 16 + x > 3 and 3 + x > 16

Simplifying, we get:

19 > x and x > 13 and x < 19

The largest possible whole-number length for the third side is 18, which satisfies all three inequalities.

To know more about Inequality visit:

brainly.com/question/30228778

#SPJ1

Answer:

- [tex]\frac{8}{13}[/tex]

Step-by-step explanation:

let n be the other rational number , then

- [tex]\frac{26}{3}[/tex] n = [tex]\frac{16}{3}[/tex]

[a number × its reciprocal = 1 ]

multiply both sides by the reciprocal - [tex]\frac{3}{26}[/tex]

n = [tex]\frac{16}{3}[/tex] × - [tex]\frac{3}{26}[/tex]  ( cancel the 3 on numerator/ denominator )

n = - [tex]\frac{16}{26}[/tex] = - [tex]\frac{8}{13}[/tex]

Step-by-step explanation:

The formula to solve for the area of a circle is given by,

A

=

1

4

π

d

2

where

d

is the diameter.

Substituting the given, we have

A

=

1

4

×

3.14

×

(

3

ft

)

2

=

1

4

×

3.14

×

9

ft

2

A

=

7.065

ft

2

Next, solve for the circumference.

The formula for the circumference of a circle is written as,

C

=

π

d

where

d

is the diameter.

Substituting the given, we have

C

=

3.14

×

3

ft

C

=

9.42

ft

Hence, the

Area

=

7.065

ft

2

and the

Circumference

=

9.42

ft

.

Answer:

A = 19.625 ft²

C = 15.7 ft

Step-by-step explanation:

The equation for the area of a circle is πr², where r is the radius.

The radius is half of the diameter, so the radius here is 2.5.

Plug the radius into the equation and substitute 3.14 for π:

A  = 3.14 x 2.5²

2.5² = 2.5 x 2.5 = 6.25

A = 3.14 x 6.25 = 19.625

Area = 19.625 ft²

The equation for the circumference of a circle is 2πr.

Plug the radius into the equation and substitute 3.14 for π:

C = 2 x 3.14 x 2.5

C = 15.7

Circumference = 15.7 feet.

Measure of last angle of triangle is 117°

The triangle's characteristics include:

The angle sum property states that the sum of a triangle's three interior angles is always 180 degrees.

Angle of Triangle are

28° and 35°

Let the third angle be x

According to angle sum property

28°+35°+x=180°

x=117°

Measure of last angle of triangle is 117°

To know more about degrees, visit:

https://brainly.com/question/364572

#SPJ1

The complete question is;

Find the measure of the last angle of the triangle below.

28⁰

35°

Image is attached below.

It is true that Jayden's solution is incorrect. It is false that Jayden added inside the parentheses before dividing.

It is false that Jayden substituted the wrong value for a. It is true that Jayden divided 14 by 2 and then added 1. 5. Jayden added inside the parentheses before multiplying. ​

1) The correct solution is

Given,

a ÷ (2 + 1. 5)

Substituting the value of a which is 14

= 14 ÷ (2 + 1. 5)

= 14 ÷ 3.5

= 4

2) As there is no term which needs to be divided so, the second statement is false.

3) Jayden didn't substitute the wrong value of a he just solved the given expression without considering the bracket and divided the 14 which is the value of a by 2.

4) Jyaden divided 14 by 2 and then added 1. 5. Jayden added inside the parentheses before multiplying. ​

i.e. a ÷ (2 + 1. 5)

14 ÷ 2 + 1. 5

7+1.5

8.5

This is the way Jayden solved the equation due to which he arrived at the wrong solution.

Learn more about Expression here: brainly.com/question/14083225

#SPJ4

The Correct question is as below

Jayden evaluated the expression a ÷ (2 + 1.5) for a = 14. He said that the answer was 8.5. Choose True or False for each statement.

1. Jayden's solution is incorrect.

2. Jayden added in the parentheses before dividing.

3. Jayden substituted the wrong value for a.

4. Jayden divided 14 by 2 and added 1.5

Answer:

The diver descends:

50 seconds x 5 feet/second = 250 feet

The diver ascends:

54 seconds x 4.4 feet/second = 237.6 feet

Therefore, the total change in elevation is:

250 feet (descent) - 237.6 feet (ascent) = 12.4 feet

So, the diver's final elevation is:

0 feet (starting elevation) - 12.4 feet (change in elevation) = -12.4 feet

Therefore, the diver ends up 12.4 feet below sea level.

Answer:

it is 1

Step-by-step explanation:

its is 1 2 3 hsvs jafsnsjhd jsusgsmsi jshsbjdg

The  standard deviation of the sampling distribution of the sample mean for the given sample size is equal  to 3.1623°F.

For the normally distributed data,

Mean of the population distribution 'μ' = 59F

Population standard deviation 'σ' = 10°F

Sample size 'n' = 10

Formula for the standard deviation of the sampling distribution of the sample mean (also known as the standard error of the mean) is equal to ,

= σ / √(n)

Substitute the value to get the standard deviation of the sampling distribution of the sample mean we get,

= 10°F / √(10)

= 3.1623°F

Therefore, the standard deviation of the sampling distribution of the sample mean for all possible random samples of size 10 from this population is approximately 3.1623°F.

Learn more about standard deviation here

brainly.com/question/30985253

#SPJ4

Answer: 240 miles in 2 hours

Step-by-step explanation:

we know the car is traveling 60 km per half hour (30 minutes)

so to find km per hour, multiply both by 2.

the rate of speed is 120 miles per 60 minutes (1 hour)

multiply 120 mph by the 2 hours given = 240 miles in 2 hours

Answer:

240 km in 2 hours

Step-by-step explanation:

If the car travels 60 km in 30 minutes, then its speed can be calculated as follows:

Speed = distance ÷ time

Speed = 60 km ÷ (30 minutes ÷ 60) = 120 km/hour

Since the car is traveling at a constant speed, we can use the formula:

Distance = Speed × Time

To find how far the car will travel in 2 hours, we can substitute the values we have found:

Distance = Speed × Time

Distance = 120 km/hour × 2 hours

Distance = 240 km

Therefore, the car will travel 240 km in 2 hours if it continues at the same constant speed.

To place two bench press machines in a small area, you will need a space of approximately 10 feet by 10 feet. Let's discuss it in detail below. Here are the dimensions of the bench press machine, which can help determine the amount of space required to fit two bench press machines in a small area:

The length of the bench press machine is between 48 inches and 54 inches.

The width of the bench press machine is between 28 inches and 32 inches.

The height of the bench press machine is between 48 inches and 56 inches.

Based on the above dimensions of the bench press machine, two machines can be placed in a small area of 10 feet by 10 feet. However, for safe use, the following guidelines should be followed:

There should be at least 6 feet of distance between the two bench press machines. There should be at least 3 feet of clearance in the front of the bench press machine to allow for safe movement during exercises. There should be at least 2 feet of clearance behind the bench press machine to allow for a safe exit in case of an emergency.

Thus, to place two bench press machines in a small area, you will need a space of approximately 10 feet by 10 feet.

To learn more about area refer :

https://brainly.com/question/27683633

#SPJ11

The hypotheses for a chi-square test of independence on the data that auditors compared opinions about treatment (very good/acceptable/poor) at four VA hospitals (labeled a,b,c,d) among veterans aged 50 and above are:

Null hypothesis, H0: There is no association between the opinions about treatment of the VA hospitals and veterans aged 50 and above.

Alternative hypothesis, Ha: There is an association between the opinions about treatment of the VA hospitals and veterans aged 50 and above.

Hypothesis Testing is a type of statistical analysis in which you put your assumptions about a population parameter to the test. It is used to estimate the relationship between 2 statistical variables.

An analyst performs hypothesis testing on a statistical sample to present evidence of the plausibility of the null hypothesis. Measurements and analyses are conducted on a random sample of the population to test a theory. Analysts use a random population sample to test two hypotheses: the null and alternative hypotheses.

To learn more about null and alternative hypothesis refer :

https://brainly.com/question/27335001

#SPJ11

Answer:

1/2 or .5

Step-by-step explanation:

If y is inversely proportional to the square of x, we can express this relationship using the formula:

y = k/x^2

where k is a constant of proportionality. We are told that y = 8 for a particular value of x, so we can substitute these values into the equation:

8 = k/x^2

To find the value of k, we can solve for it:

k = 8x^2

Now we are asked to find the new value of y when x increases by 300%. This means that the new value of x will be 4 times the original value (since an increase of 300% means an increase by a factor of 3, and we need to add the original value to get the new value). So we can substitute 4x for x in our equation:

y = k/(4x)^2 = k/16x^2

We already know the value of k, so we can substitute it in and simplify:

y = (8x^2)/(16x^2) = 1/2

Therefore, the new value of y is 1/2 when x increases by 300%.

The two-period moving average model and the two-period weighted moving average model are both common forecasting methods used to predict future demand. and we understand that the model with the lower MAD and MSE values will have the most accurate forecast.

To determine which model is better for this particular data set, we need to compare the accuracy of each model. To do this, we will calculate the Mean Absolute Deviation (MAD) and the Mean Squared Error (MSE) for each model.
For the two-period moving average model, we can calculate the forecast for period 7 by taking the average of p5 and 6:

Period 7 forecast = (Gallons in Period 5 + Gallons in Period 6)/2

For the two-period weighted moving average model, we can calculate the forecast for period 7 by using the weights of 0.6 and 0.4:

Period 7 forecast = (0.6 x Gallons in Period 5) + (0.4 x Gallons in Period 6)

We can then compare the accuracy of each model by calculating the MAD and MSE. To calculate MAD, we need to subtract the actual demand in each period from the forecasted demand and take the absolute value:

MAD = |Actual demand – Forecasted demand|

To calculate MSE, we need to square the differences between the actual demand and the forecasted demand:

MSE = (Actual demand – Forecasted demand)^2

After calculating the MAD and MSE for each model, we can compare the results to determine which model is better for this data set. The model with the lower MAD and MSE values will have the most accurate forecast.

For more such questions on forecast

https://brainly.com/question/24730207

#SPJ11

Answer:

The sequence is defined as follows:

a1 = 5

an = an-1 - 5, for n > 1

Using this definition, we can find the first four terms of the sequence as follows:

a1 = 5

a2 = a1 - 5 = 5 - 5 = 0

a3 = a2 - 5 = 0 - 5 = -5

a4 = a3 - 5 = -5 - 5 = -10

Therefore, the first four terms of the sequence are: 5, 0, -5, -10.

A basis for the space of 2x2 lower triangular matrices is [tex]\left(\left[\begin{array}{ccc}1&0\\0&0\end{array}\right],\left[\begin{array}{ccc}0&0\\1&0\end{array}\right],\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]\right)[/tex].

Lower triangular matrices resemble the following:

[tex]\left[\begin{array}{ccc}a&0\\b&c\end{array}\right][/tex]

We can write it like this:

[tex]a\left[\begin{array}{ccc}1&0\\0&0\end{array}\right]+b\left[\begin{array}{ccc}0&0\\1&0\end{array}\right]+c\left[\begin{array}{ccc}0&0\\0&1\end{array}\right][/tex]

This demonstrates the set's

[tex]\left(\left[\begin{array}{ccc}1&0\\0&0\end{array}\right],\left[\begin{array}{ccc}0&0\\1&0\end{array}\right],\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]\right)[/tex]

covers the set of lower triangular matrices with dimensions 2x2. Moreover, these are linearly independent, so attempting to

[tex]a\left[\begin{array}{ccc}1&0\\0&0\end{array}\right]+b\left[\begin{array}{ccc}0&0\\1&0\end{array}\right]+c\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]=\left[\begin{array}{ccc}0&0\\0&0\end{array}\right][/tex]

leads to

[tex]\left[\begin{array}{ccc}a&0\\b&c\end{array}\right] =\left[\begin{array}{ccc}0&0\\0&0\end{array}\right][/tex]

which results in a = b = c = 0 right away. As there is no other way to

[tex]a\left[\begin{array}{ccc}1&0\\0&0\end{array}\right]+b\left[\begin{array}{ccc}0&0\\1&0\end{array}\right]+c\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]=\left[\begin{array}{ccc}0&0\\0&0\end{array}\right][/tex]

, these matrices are linearly independent if a = b = c = 0.

Since

[tex]\left(\left[\begin{array}{ccc}1&0\\0&0\end{array}\right],\left[\begin{array}{ccc}0&0\\1&0\end{array}\right],\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]\right)[/tex]

they serve as a foundation by spanning the collection of 2x2 lower triangular matrices and being linearly independent.

To learn more about triangular matrices link is here

brainly.com/question/28325468

#SPJ4

Answer:calculate the cube root of a cube's volume.

Step-by-step explanation:

We would name this polynomial as a quadratic polynomial with two terms.

A polynomial function is one that involves only non-negative integer powers or positive integer exponents of a variable in an equation such as the quadratic equation, cubic equation, and so on.

In the standard form of a polynomial, the terms are written in descending order of degree. The standard form for a polynomial of degree n is:

a1x + a0 + anxn + an-1xn-1 +...

We have the polynomial in this case:

9x² - 213

To write it in standard form, rearrange the terms in descending order of degree as follows:

213 + 9x²

As a result, the standard form of the polynomial is:

9x² - 213

This polynomial has degree 2 (because x's highest exponent is 2) and two terms (since there are two distinct parts to the expression, a constant and a term with an x squared coefficient).

As a result, we'd call this polynomial a quadratic polynomial with two terms.

To know more about polynomial visit:

https://brainly.com/question/29342570

#SPJ1

In order to make the same amount of money, they would have to each sell 5 bicycles. They would both make $500

To find the number of bicycles they would need to sell to make the same amount of money,

We can set Jim's and Tom's weekly earnings equal to each other and solve for the number of bicycles:

250 + 50x = 400 + 20x

30x = 150

x = 5

So they would need to sell 5 bicycles to make the same amount of money.

To find out how much money they would make for selling 5 bicycles, we can substitute x = 5 into either equation.

Let's use Jim's equation:

250 + 50(5) = 500

So they would make $500 for selling 5 bicycles.

Read more about linear relation at

https://brainly.com/question/4074386

#SPJ1

The smallest number of beads we can take so that the conditions for performing inference are met is 40.

Probability:

The probability of an event is a number that indicates the probability of the event occurring. Expressed as a number between 0 and 1 or as a percent sign between 0% and 100%. The more likely an event is to occur, the greater its probability. The probability of an impossible event is 0; the probability of a certain event occurring is 1. The probability of two complementary events A and B - A occurring or B occurring - adds up to 1.

According to the Question:

Given in the question,

Teacher prepares a large container filled with colored beads. She claims that 1/8 beads are red, 1/4are blue, and the rest are yellow. Your class will test the teacher's claim by randomly drawing a simple sample of beads from the container.

Quadrant                     Frequency

      1                                    18

      2                                   22

      3                                   39

      4                                   21

The proportions are 1/8 , 1/4 and 5/8

Here, the smallest probability is 1/8 , thus it would be used to compute the frequency.

Now,

The expected frequencies are calculated as:

E = np₁ = 15 (1/8) = 1.875

E = np₂ = 16(1/8) = 2

E = np₃ = 30(1/8) = 3.75

E = np₄ = 40(1/8) = 5

E = np₅ = 80(1/8) = 10

Here, conditions are fulfilling for 40 and 90 but the smallest sample size is contained by 40. Thus, the correct option is 40.

Learn more about Number:

https://brainly.com/question/17429689

#SPJ4