Explanation:
Load=500N
Effort=100N
Now,
We have,
Mechanical advantage= Load / effort
= 500/100
=5
Therefore, mechanical advantage is 5.
How do the products of chemical reactions compare to their reactants? Question 5 options: The products usually weigh more than the reactants. The products often have completely different properties than the reactants. The products usually have more atoms than the reactants. The products are usually more toxic than the reactants.
Answer:
The products often have completely different properties than the reactants.
Explanation:
In a chemical reaction, the products are often completely different from the reactants.
When chemical reactions takes place, the species rearranges to form new bonds and to attain stability.
Therefore, the new products formed usually have completely different properties when compared to the reactants.
Also, in chemical reactions, mass is always conserved. The mass of the products and reactants are usually the same.
Which statement correctly describes protons and neutrons? *
O They have the same mass and the same electrical charge.
They have different masses but the same electrical charge.
O They have different masses and different electrical charges.
They have the same mass but different electrical charges.
Answer:
They have the same mass but different electrical charges.
Explanation:
Protons have a positive charge while neutrons have a neutral charge. Although they have different charges, they have the same amount of mass.
The protons and neutrons have the same mass but different electrical charges. THerefore, option (D) is correct.
What is a proton?A proton is described as a stable subatomic particle, a chemical symbol with +1e elementary charge. The mass of the proton is approximately equal to the mass of the neutron but 1836 times the mass of an electron.
Protons and neutrons are jointly together termed "nucleons" each with masses of approximately one atomic mass unit (a.m.u.). There will be one or more than one proton present in the nucleus of an atom. There is an attractive electrostatic central force that holds the atomic electrons.
The number of protons in the atom is referred to as the atomic number and is expressed by the symbol Z. Since each element in the periodic table has a unique number of protons, determines the chemical characteristics of the element.
As the neutrons present in the nucleus of an atom are neutral and do not carry any charge while the protons are positively charged.
Learn more about protons, here:
brainly.com/question/12535427
#SPJ2
Would you expect manganese(II) oxide, MnO, to react more readily with HF(aq) or NaOH(aq)?
Answer:
NaOH(aq)
Explanation:
NaOH(aq) is known to precipitate Mn^2+ ions according to the following reaction; Mn^2+(aq)+2OH^−(aq)↽−−⇀Mn(OH)2(s)
Hence, manganese(II) oxide reacts more readily with NaOH(aq) under ordinary conditions precipitating the metal hydroxide solid. This is one of the characteristic reactions of Mn^2+.
7th grade help me plzzzzzzzzzz
which best represents a compound?
Answer:
The one above B
Explanation:
The one above B is most represents a compound because compounds are chemically bonded and are always near each other.
What does it mean when there is a physical change?
Question 2 options:
Matter has changed from one substance into another.
Matter has changed on the molecular level.
A new substance has been formed.
Matter has changed size, shape or form
Matter has changed size shape or form
a physical change is when you can see on the outside that a change is happening and you can set it back together like air
a chemical change is a molecular change that you cannot fix. like burnt chocolate
What will most likely happen if you place a piece of metal in a base?
O A. The metal will turn into a salt.
O B. The metal will neutralize the base.
C. The metal will give off a gas.
O D. The metal will not react with the base.
Answer:D
Explanation:
The metal will not react
Do you agree or disagree with the statement: "A rise of -7°C" means "a fall of 7°C"? Explain.
Answer:
i would agree
Explanation:
Colleen waters the plants in her greenhouse once every day. She wants to find out if the plants will grow more leaves if they are watered more often. She counts the number of leaves on each plant before she starts. She then continues to water half of each type of plant once daily, but she waters the other half of each type twice a day. What is the dependent variable in Colleen's experiment?
Learning Task No. 3: Write a short paragraph regarding the differences between
saturated and unsaturated solutions.
Type of Solution
Explanations about the differences of
the two solutions
Saturated solution
Unsaturated solution
Answer:
See explanation
Explanation:
A saturated solution is a solution that contains just as much solute as it can normally hold at a given temperature in the presence of undissolved solute. An unsaturated solution contains less solute than it can normally hold at a given temperature. A saturated solution can not dissolve more solute whereas an unsaturated solution can comfortably dissolve more solute until it attains saturation at a specified temperature.
A student reports the following measurements for a set of pennies: 102.0mL, 91.0 g. What is the density of the pennies.
Answer:
V = 102.0 ml
m = 91.0 ml
density = ...?
density = m / V
= 91.0 / 102.0
= 0.89215 g/ml
A cat runs across a road that
is 9 meters (m) wide. It
covered this distance in 3
seconds (s). What is the
speed of the cat?
Meh peepss halp will mark brainliest!!!! u-u
Answer:
The three parts of the cell theory are as follows: (1) All living things are made up of cells, (2) Cells are the smallest units (or most basic building blocks) of life, and (3) All cells come from preexisting cells through the process of cell division. ... Today, the cell theory is considered the foundation of biology.
Explanation:
hope this help.. brainliest???
Answer:
i wanna give brailiest to the person at the top!
Explanation:
The temperature of a sample of gas in a steel tank at 0.30 ATM at 25 Celsius if the pressure W20.59 ATM what would be the final temperature inside the tank in kelvin
The final temperature : 313.06 °C
Further explanationGay Lussac's Law
When the volume is not changed, the gas pressure is proportional to its absolute temperature
[tex]\dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]
P1=0.3 atm
T1=25 + 273=298 K
P2=0.59 atm
[tex]\tt \dfrac{0.3}{298}=\dfrac{0.59}{T_2}\\\\T_2=586.06=313.06~^oC[/tex]
Why are the Galápagos Islands such a place of interest to the world
Answer:
Explanation:
an example of a physical change that does not involve any changes in CHEMICAL PROPERTIES. Explain which physical properties have changed and list a chemical property which has not changed.
Answer:
Ripping a Paper
Explanation:
Physical Properties changed - The size has decreased, and the shape has changed.
Chemical property- Flammability
Karsten performed a scientific study on the way that a certain chemical affects ecosystems. After Karsten published his results, one of his peers said that Karsten's conclusion was influenced by selection bias. What did Karsten's peer mean by this statement?
A.
Karsten did not choose the correct topic to study.
B.
Karsten did not spend enough time studying the chemical.
C.
Karsten's data did not support his published conclusion.
D.
Karsten's results could have been different in other ecosystems.
Answer:
C
Explanation:
What makes up an isotope’s mass number?
A.) The number of protons and neutrons
B.) The number of protons, neutrons, and electrons
C.) The number of stable isotopes of an element
Answer:
A
Explanation:
Why do restaurants sometimes serve free salty snacks like popcorn, crackers, or peanuts? Are they just being nice?
Answer:
it most likely goes with your meal
Explanation:
hope this helps
what form of heat transfer makes warm air rise?
I NEED HELP!!
In a stream, how are particles such as silt, clay, and sand carried?
A. as dissolve load
B. as bed load
C. in suspension
D. in solution
In a stream, how are particles such as silt, clay, and sand carried?
A. particles rubbing together
B. An increase is suspended materials
C. an increase in the dissolve load
D. changes in the stream 's carrying capacity
The path of a stream can vary considerably, depending on the slope of the land and the
A. bedload of the stream
B. amount of rainfall
C. amount of hummus present in the soil
D. Type of material through which the stream flows
The amount of dissolved material that stream water carries is usually expressed in
A. cubic meters per second
B. parts per million
C. cubic feet per minute
D. grams per 1000 gallons
The carrying capacity of a stream depends on both the velocity and the
A. Temperature of the water
B. amount of water in the stream
C. type of material through which the stream flows
D. minerals dissolved in the stream
Answer:
1 B
2A
#D
3B
1D
2B
3C
4A
A,C,A,B
C,A,C,A
C,A,A,B
Explanation:
Easy ive done this brings back memories
In ecosystem, particles are carried as bed load by rubbing particles together.Path of stream can be varied depending on amount of humus present in soil and is measured in cubic meters per second and carrying capacity depends on type of material through which stream flows.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/1673533
#SPJ2
!!!!! HELP DUE IN 2 MIN !!!
A graph titled Position versus time for with horizontal axis time (seconds) and vertical axis position (meters). The line runs in 3 straight segments from 0 seconds 0 meters to 4 seconds 12 meters to 6 seconds 12 meters to 12 seconds 0 meters.
Use the graph to determine the instantaneous speed at 2 seconds.
m/s
What is the average speed over the entire trip?
m/s
Answer: 3, 2
Explanation: right on edge 2020
Answer:
The answer are 3 and 2
Explanation:
just took it
i dont understand please help:))
Answer:
equal to
Explanation:
the balloon is equal to it
Si units are the modern form of _____
Answer:
Metric system !!hope this helpss
Calculate the average atomic mass of element Q, if the isotopic composition of element Q is as follows: Q-107 has an abundance of 78%, and Q-110 has an abundance of 22%. Type your answer rounded to two decimal places.
Answer:
5
Explanation:
7th grade help me plzzzzzz
How many grams of H2SO4 are needed to react with 78.86 grams of AI(NO3)3 ?
I
Answer:
53.18 grams of H₂SO₄ are needed to react with 78.86 grams of Al(NO₃)₃.
Explanation:
The balanced reaction between Al(NO₃)₃ and H₂SO₄ is:
2 Al(NO₃)₃ + 3 H₂SO₄ → Al₂(SO₄)₃ + 6 HNO₃
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of reagents are required:
Al(NO₃)₃: 2 molesH₂SO₄: 3 molesBeing the molar mass of the elements:
Al: 27 g/moleN: 14 g/moleO: 16 g/moleH: 1 g/moleS: 32 g/molethen the molar mass of the reactants are:
Al(NO₃)₃: 27 g/mole + 3*(14 g/mole + 3*16 g/mole)= 213 g/moleH₂SO₄: 2*1 g/mole + 32 g/mole +4*16 g/mole= 98 g/moleThen, by reaction stoichiometry, the following reagent mass amounts are required:
Al(NO₃)₃: 2 moles* 213 g/mole= 436 g H₂SO₄: 3 moles*98 g/mole= 294 gThen you can apply the following rule of three: If by stoichiometry 436 g of Al(NO₃)₃ react with 294 g of H₂SO₄, 78.86 g of Al(NO₃)₃ with how much mass of H₂SO₄ will it react?
[tex]mass of H_{2} SO_{4} =\frac{78.86 grams of Al(NO_{3} )_{3}*294gramsofH_{2} SO_{4} }{436 grams of Al(NO_{3} )_{3}}[/tex]
mass of H₂SO₄=53.18 g
53.18 grams of H₂SO₄ are needed to react with 78.86 grams of Al(NO₃)₃.
Which of the following might be included in a chemical
reaction?
a Molecules
b lons
C Pure elements
d All of the above
Answer:
D. All of the above
Explanation:
Molecules, ions, and pure elements might be included in a chemical reaction. Therefore, option (d) is correct.
What is a chemical reaction?A chemical reaction can be described as a reaction that brings the chemical conversion of one chemical substance to another chemical substance. The reactions cause chemical changes that include the rearrangement of electrons in order to create and break bonds between atoms.
The compound or molecules which are primarily utilized in a reaction are called reactants. Chemical reactions give products, which possess characteristics different from the reactants of the reaction.
Chemical reactions take place at a definite rate of reaction at a given concentration, temperature, and pressure. The rate of reaction increases with the rising temperature of the reaction as more activation energy is available for reactant molcules collisions.
Therefore, in a chemical reaction reactants and products can be present as Molecules, ions, and pure elements.
Learn more about Chemical reactions, here:
brainly.com/question/22817140
#SPJ2
If you start with 100 grams of hydrogen-3, how many grams will you have after 24.6 years?
Answer:
The mass left after 24.6 years is 25.0563 grams
Explanation:
The given parameters are;
The mass of the hydrogen-3 = 100 grams
The half life of hydrogen-3 which is also known as = 12.32 years
The formula for calculating half-life is given as follows;
[tex]N(t) = N_0 \times \left (\dfrac{1}{2} \right )^{\dfrac{t}{t_{\frac{1}{2} }} }[/tex]
Where;
N(t) = The mass left after t years
N₀ = The initial mass of the hydrogen-3 = 100 g
t = Time duration of the decay = 24.6 years
[tex]t_{\frac{1}{2} }[/tex] = Half-life = 12.32 years
[tex]N(24.6) = 100 \times \left (\dfrac{1}{2} \right )^{\dfrac{24.6}{12.32}} } = 25.0563[/tex]
The mass left after 24.6 years = 25.0563 grams.
This is a change in an objects motion caused by an unbalanced force
Answer:
This is a change in an objects motion caused by an unbalanced force.
- Acceleration
Answer:
Pressure
Pressure is done when a force is applied to an object to course a motion
