A source emits sound at a fixed constant frequency f. If you run towards the source, the frequency you hear is

Answer:

a)[tex]|\Delta E|=4.58\: J[/tex]  

b)[tex]F=61.90\: N[/tex]

Explanation:

a)

We can use conservation of energy between these heights.

[tex]\Delta E=mgh_{2}-mgh_{1}=mg(h_{2}-h_{1})[/tex]  

[tex]\Delta E=0.608*9.81(0.6026-1.37)[/tex]

Therefore, the lost energy is:

[tex]|\Delta E|=4.58\: J[/tex]  

b)

The force acting along the distance create a work, these work is equal to the potential energy.

[tex]W=\Delta E[/tex]

[tex]F*d=mgh[/tex]

Let's solve it for F.

[tex]F=\frac{mgh}{d}[/tex]

[tex]F=\frac{0.608*9.81*1.37}{0.132}[/tex]

Therefore, the force is:

[tex]F=61.90\: N[/tex]

I hope is helps you!

Answer:

Look at explanation

Explanation:

a) Kinetic energy= ΔW. W=Fd, and since in both scenarios the same force and same distance is travelled. K1=K2. I am assuming that the objects are at non zero height so by P=mgh, P1>P2

b. Again I am assuming that the objects are at non zero height so by P=mgh, P1>P2.  A heavier mass, a constant force means a smaller acceleration. So a1<a2. We can then use x-x0=v0t+1/2at² and since v0=0, x-x0(d)=1/2at². Solve for t²=2d/a. Since t is the same for both but a1<a2, d1<d2. And since Kinetic Energy=ΔW, W=Fd and F is constant while d1<d2, K1<K2.

According to the question,

(a)

Word done towards both the block will be similar.

So,

→ [tex]P1 = P2[/tex]

→ [tex]K1= K2[/tex]

(b)

We know,

→ [tex]a = \frac{F}{M}[/tex]

or,

→ [tex]V = a\times t[/tex]

Now,

→ [tex]K = \frac{1}{2} MV^2[/tex]

       [tex]= 0.5\times M\times V^2[/tex]

       [tex]=0.5\times M\times (\frac{F^2}{M^2} )\times t^2[/tex]

       [tex]= 0.5\times F^2\times \frac{t^2}{M}[/tex]

The force and t will be same. So K of the smaller mass will be greater than the larger mass.

hence,

→ [tex]K1<K2[/tex]

Thus the above responses are correct.        

Learn more about friction here:

https://brainly.com/question/13340887

Answer:

1.56 m/s²

Explanation:

Projectile motion is a form of motion where an object moves in parabolic path (trajectory). Projectile motion only occurs when there is one force applied at the beginning on the trajectory, after which the only interference is from gravity.

The total time (time of flight) of an object is given by:

T = 2usinθ / g

where u is the initial velocity, θ is the angle with horizontal and g is the acceleration due to gravity

Since the astronaut throws a rock straight up, hence θ = 90°, u = 19 m/s, T = 24.4 s.

T = 2usinθ / g

Substituting:

24.4 = 2(19)(sin90)/g

g = 2(19)(sin90) / 24.4

g = 1.56 m/s²

Answer:

2) when acceleration triples force triples,  3) a diagram with dynamic friction force in the opposite direction of movement of the car

4)  a = 2.44 ft / s², 5)  fr = 894.3 N

Explanation:

In this exercise you are asked to answer some short questions

2)  Newton's second law is

         F = m a

when acceleration triples force triples

3) Unfortunately, the diagrams are not shown, but the correct one is one where the axis of movement has a friction force in the opposite direction of movement, as well as indicating that the car slips, the friction coefficient of dynamic.

The correct answer is: a diagram with dynamic friction force in the opposite direction of movement of the car

4) let's use the scientific expressions

          v = v₀ - a t

as the car stops v = 0

          a = v₀ / t

let's reduce the magnitudes

          v₀ = 40 mile / h ([tex]\frac{5280 ft}{1 mile}[/tex]) ([tex]\frac{1 h}{3600 s}[/tex]) = 58.667 ft / s

          a = 58.667 / 24

          a = 2.44 ft / s²

5) let's use Newton's second law

           fr = m a

We must be careful not to mix the units, we will reduce the acceleration to the system Yes

           a = 2.44 ft / s² (1 m / 3.28 ft) = 0.745 m / s²

           fr = 1200  0.745

           fr = 894.3 N

Explanation:

15.556 metres per second

Answer:

In parts 1 and 3 the energy

In part 2  moment.  inelastic

conserved

Explanation:

In this exercise, we are asked to describe the conservation processes for each part of the exercise.

In parts 1 and 3 the energy is conserved since the bodies do not change

In part 2 the bodies change since they are united therefore the moment is conserved and part of the kinetic energy is converted into potential energy.

Energy

moment   .inelastic

conserved

The two balls swing up together just after the collision to their highest point. energy is conserved.

According to the law of conservation of momentum, the momentum of the body before the collision is always equal to the momentum of the body after the collision.

According to the law of conservation of momentum

Momentum before collision =Momentum after collision

When the first ball is released and just before it hits the stationary ball, The two balls collide, The two balls swing up together just after the collision to their highest point. energy is conserved.

The balls swing like pendulums. During the collision in part (2) energy is conserved as the collision is inelastic.

We are requested to describe the conservation methods for each element of the activity in this exercise.

Because the bodies do not change in sections 1 and 3, energy is conserved.

Because the bodies change in part 2 is joined, the moment is conserved and some of the kinetic energy is transformed into potential energy.

Hence the two balls swing up together just after the collision to their highest point. energy is conserved.

To learn more about the law of conservation of momentum refer to;

https://brainly.com/question/1113396

Answer:

The force on the side is 5252 N.

Explanation:

Area, A =  8 in x 10 in = 80 in^2 = 0.052 m^2

height, h = 10 in

The force on the area is

F = P x A

where, P is the atmospheric pressure and A is the area.  

P = 1.01 x 10^5 Pa

Force = 1.01 x10^5 x 0.052 = 5252 N

Answer:

3.1m

Explanation:

Since we only care about the y direction we only need to find vy. Once u draw your vector you will realize that vy= 4.5sin60=3.897m/s.

use vf²=v²+2a(y)

At the maximum height the velocity is 0 and since the object is in freefall, a=-g

Plug in all values

0=15.1875-2*9.8(y)

solve for y

-15.1875*2/-9.8=y

y=3.1m

Answer:

0.774m

Explanation:

The formula for maximum height is given by:

hmax = ∨₀² ₓ Sin (α)² / 2 × g

where;

∨₀ = initial velocity

Sin (α) = angle of launch

g = gravitational acceleration which is equal to 9.8m/s²

Plugging in our values, we will have:

hmax = (4.50m/s)² × (Sin 60.0)² / 2 × 9.8m/s²

hmax= 20.25m/s × 0.75 / 19.8m/s²

hmax = 15.1875 / 19.8

hmax = 0.774m

Answer:

m = 0.057 kg = 57 g

Explanation:

Energy Added to Water = Heat added to raise the temperature of water + Heat used to vaporize water

[tex]E = mC\Delta T + mH\\E = m(C\Delta T + H)[/tex]

where,

E = Energy added to water = 145 KJ

m = mass of water = ?

C = specific heat capacity of water = 4.2 KJ/kg.°C

ΔT = change in temperature = 100°C - 35°C = 65°C

H = Latent heat of vaporization of water = 2260 KJ/kg

Therefore,

[tex]145\ KJ = m[(4.2\ KJ/kg.^oC)(65^oC)+2260\ KJ/kg]\\\\145\ KJ = m(2533\ KJ/kg)\\\\m = \frac{145\ KJ}{2533\ KJ/kg}[/tex]

m = 0.057 kg = 57 g

The mass of water that can be heated is equal to 0.527 kilograms.

Given the following data:

Scientific data:

To calculate the mass of water that can be heated:

Note: The quantity of energy added to water is equal to the quantity of heat used to vaporize water and the quantity of heat that is added to raise the temperature of water.

Mathematically, this is given by this expression:

[tex]E=mc\theta + mH\\\\E= m(c\theta + H)[/tex]

Making m the subject of formula, we have:

[tex]m=\frac{E}{c\theta + H}[/tex]

Substituting the parameters into the formula, we have;

[tex]m=\frac{145000}{[42000\times (100-35)] + 2260}\\\\m=\frac{145000}{(4200\times 65) + 2260}\\\\m=\frac{145000}{273000 + 2260}\\\\m=\frac{145000}{275260}[/tex]

Mass, m = 0.527 kilograms.

Read more on quantity of energy here: https://brainly.com/question/13439286

Answer:

2.21 N

Explanation:

The force in this case is the total mass multiplied by the acceleration due to gravity. You are not asked for the solution to be in terms of the torque which is the usual way to solve these problems. That's why you are not given where the fulcrum is.

The fulcrum feels F1 + F2 + 34 * 980

F2 = 141.7 * 980 = 138866

F1 = 50.3 * 980  =  49294

Ruler = 34 * 980=  33320

Total Force = 221480 The units here are dynes

I just saw in the middle of the question that g = 9.80

So the answer becomes 221480 / 1000 = 221.48   because we needed kg

And that answer becomes 221.48/100 2.21 because the force of gravity should be 9.8 not 980

The total force exerted on the fulcrum is

Answer:

[tex]K.E_{max}=0.8973J[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=1.64kg[/tex]

Equation of Mass

[tex]X=0.33cos(3.17t)[/tex]...1

Generally equation for distance X is

[tex]X=Acos(\omega t)[/tex]...2

Therefore comparing equation

Angular Velocity [tex]\omega=3.17rad/s[/tex]

Amplitude A=0.33

Generally the equation for Max speed is mathematically given by

[tex]V_{max}=A\omega[/tex]

[tex]V_{max}=0.33*3.17[/tex]

[tex]V_{max}=1.0461m/s[/tex]

Therefore

[tex]K.E_{max}=0.5mv^2[/tex]

[tex]K.E_{max}=0.5*1.64*(1.0461)^2[/tex]

[tex]K.E_{max}=0.8973J[/tex]

Answer:

0.5 V

Explanation:

The electric potential distance between different locations in an electric field area is unaffected by the charge that is transferred between them. It is solely dependent on the distance. Thus, for two electrons pushed together at the same distance into the same field, the electric potential will remain at 1 V. However, the electric potential of one of the two electrons will be half the value of the electric potential for the two electrons.

Answer:

joule

Explanation:

Speed= distance/time

Or time = distance/speed

According to your question

Speed=15m/s

and. Distance=1.2km. ,we must change kilometer in meter because given speed is in m/s

D= 1.2km = 1.2×1000m =1200meter

Time = distance/ speed

1200/15 =80second

Or. 1min and 20 sec will be your answer.

Answer:

E = m c^2 = 2.5 * (3 * 10E8)^2 = 2.25 * 10E17 Joules

Answer:

The answer is D. 2.25 × 1017 J

Explanation:

got it right on edge 2021

Answer:

Initially let n cannonballs with a total mass of m be to the left of the center of mass at L /2 and the mass of the car at L/2

x1 =  [-m / (m + M)] * L / 2   is the original position of the CM

x2 = (m (x + L/2) + M x) / (m + M) * L/2 final position of CM with all cannon balls to the right

[-m x - m L / 2 + m x - M x] / (M + m) * L/2

= - ( m L / 2 + M x) / (m + M) * L/2 = Xcm

Check the math, but maximum distance occurs when the cannonballs of mass m move from -L/2 to L/2 and the car of mass M moves from zero to -x

Let A be the position of the block at the top of the first incline; B its position at the bottom of the first incline; C its position at the bottom of the second incline; and D its position at the top of the second incline. I'll denote the energy of the block at a given point by E (point).

At point A, the block has total energy

E (A) = (10.0 kg) (9.80 m/s²) (7.00 m) + 1/2 (10.0 kg) v₀²

E (A) = 686 J + 1/2 (10.0 kg) v₀²

At point B, the block's potential energy is converted into kinetic energy, so that its total energy is

E (B) = 1/2 (10.0 kg) v₁²

The block then slides over the horizontal surface with constant speed v₁ until it reaches point C and slides up a maximum height of 26.0 m to point D. Its total energy at D is purely potential energy,

E (D) = (10.0 kg) (9.80 m/s²) (26.0 m) = 2548 J

Throughout this whole process, energy is conserved, so

E (A) = E (B) = E (C) = E (D)

(a) Solve for v₀ :

686 J + 1/2 (10.0 kg) v₀² = 2548 J

==>   v₀ ≈ 19.3 m/s

(b) Solve for v₁ :

1/2 (10.0 kg) v₁² = 2548 J

==>   v₁ ≈ 22.6 m/s

Now if the horizontal surface is not frictionless, kinetic friction will contribute some negative work to slow down the block between points C and D. Check the net forces acting on the block over this region:

• net horizontal force:

∑ F = -f = ma

• net vertical force:

∑ F = n - mg = 0

where f is the magnitude of kinetic friction, a is the block's acceleration, n is the mag. of the normal force, and mg is the block's weight. Solve for a :

n = mg = (10.0 kg) (9.80 m/s²) = 98.0 N

f = µn = 0.500 (98.0 N) = 49.0 N

==>   - (49.0 N) = (10.0 kg) a

==>   a = - 4.90 m/s²

The block decelerates uniformly over a distance 2.00 m and slows down to a speed v₂ such that

v₂² - v₁² = 2 (-4.90 m/s²) (2.00 m)

==>   v₂² = 490 m²/s²

and thus the block has total/kinetic energy

E (C) = 1/2 (10.0 kg) v₂² = 2450 J

(c) The block then slides a height h up the frictionless incline to D, where its kinetic energy is again converted to potential energy. With no friction, E (C) = E (D), so

2450 J = (10.0 kg) (9.80 m/s²) h

==>   h = 25.0 m

(d) At half the maximum height, the block has speed v₃ such that

2450 J = (10.0 kg) (9.80 m/s²) (h/2) + 1/2 (10.0 kg) v₃²

==>   v₃ ≈ 15.7 m/s

The block loses speed and thus energy as it moves between B and C, but its energy is conserved elsewhere. If we ignore the inclines and pretend that the block is sliding over a long horizontal surface, then its velocity v at time t is given by

v = v₁ + at = 22.6 m/s - (4.90 m/s²) t

The block comes to a rest when v = 0 :

0 = 22.6 m/s - (4.90 m/s²) t

==>   t ≈ 4.61 s

It covers a distance x after time t of

x = v₁t + 1/2 at ²

so when it comes to a complete stop, it will have moved a distance of

x = (22.6 m/s) (4.61 s) + 1/2 (-4.90 m/s²) (4.61 s)² = 52.0 m

(e) The block crosses the rough region

(52.0 m) / (2.00 m) = 26 times

Answer:

Acceleration

Explanation:

The fact that new can go from zero to 60mph in 8 secs is a description of its pick-up or in physics,  it's called acceleration.

Here initial velocity u= 0

final velocity v = 60 mph = 1m/minute.

or v =1609.344/60 = 26.82m/s

and time taken to do so is 8 sec

Acceleration a = (v-u)/t

a = (26.82-0)/8 = 3.35 m/s^2

Therefore, acceleration of the car a = 3.35 m/s^2.

Answer:

p = 1.2 kg-m/s

Explanation:

The question is, "An object of mass 0.5kg is moving along a rectilinear path with constant acceleration of 0.3m / s2. If it started from rest and the magnitude of its momentum in kg * m / s after 8s is".

Mass of the object, m = 0.5 kg

Acceleration of the object, a = 0.3 m/s²

We need to find the momentum after 8 seconds.

We know that,

[tex]p=F\times t[/tex]

i.e.

p = mat

So,

[tex]p=0.5\times 0.3\times 8\\\\p=1.2\ kg-m/s[/tex]

So, the momentum of the object is 1.2 kg-m/s.

Answer:

the rock speed is increased

A rock is initially at rest concerning the earth, but the speed of the rock will increase when it hits the ground.

The resistance to something rolling or moving over another solid object is called friction. Even though frictional forces can be helpful, like the traction needed to walk without slipping, they also present a considerable amount of resistance to motion. About 20% of the engine power in a car is used to combat frictional forces in the moving parts.

The primary cause of friction between metals appears to be the forces of attraction, also known as adhesion, between the contact zones of the surfaces, which are always microscopically unequal. Because of friction caused by the imperfections of the tougher surface rubbing up against the softer surface, these "welded" connections are sheared.

To know more about Friction :

https://brainly.com/question/13000653

#SPJ2

Answer:

Images formed by a convex mirror are always ​virtual

Explanation:

A virtual image is always created by a convex mirror, and it is always situated behind the mirror. The picture is vertical and situated at the focus point when the item is far away from the mirror. As the thing approaches the mirror, the image follows suit and increases until it reaches the same height as the object.

OAmalOHopeO

Answer:

d. Sodium chloride (salt) + water

Explanation:

learn more: https://brainly.com/question/2331419

Answer:D. Sodium chloride (salt) and water

Explanation:

I got it right on edge 2023

hope this is helpful!

Answer:

dont be lose because the person who lose will win the match

Answer:

What is (a) the x component and (b) the y component of the net electric field at the square's center

Answer:

True. A permanent magnet like the earth produces its own B field due to movement of the iron core. The earths magnetic field is the reason why we have an atmosphere and it also is the only defense against solar flares. A coil of wire or solenoid that has current have so much moving charge that the motion of the electrical charge can create a significant G b-field

Answer:

 T = 5.45 10⁻¹⁰   [tex]\sqrt{(R_e + h)^3}[/tex]

Explanation:

Let's use Newton's second law

          F = ma

force is the universal force of attraction and acceleration is centripetal

          G m M / r² = m v² / r

          G M / r = v²

as the orbit is circular, the speed of the satellite is constant, so we can use the kinematic relations of uniform motion

          v = d / T

the length of a circle is

          d = 2π r

we substitute

        G M / r = 4π² r² / T²

        T² = [tex]\frac{4\pi ^2 }{GM} \ r^3[/tex]

the distance r is measured from the center of the Earth (Re), therefore

        r = Re + h

where h is the height from the planet's surface

let's calculate

         T² = [tex]\frac{4\pi ^2}{ 6.67 \ 10^{-11} \ 1.991 \ 10^{30}}[/tex]   (Re + h) ³

         T = [tex]\sqrt{29.72779 \ 10^{-20}} \ \sqrt[2]{R_e+h)^3}[/tex]

         T = 5.45 10⁻¹⁰   [tex]\sqrt{(R_e + h)^3}[/tex]

Answer:

the SI unit (meter per second square) indicates a linear type of motion.

Explanation:

Given;

acceleration of the car, a = 5.2 m/s² North

the SI unit of the car, = m/s²

The SI unit of the given value (acceleration), indicates a linear type of motion.

Linear acceleration is the change in linear velocity with time. Also, the northwards direction indicates linear displacement of the car.

Therefore, the SI unit (meter per second square) indicates a linear type of motion.

Answer:

displacement

Explanation:

N = 52.0 N

Explanation:

Given: [tex]F_a= 20.0\:\text{N}=\:\text{applied\:force}[/tex]

[tex]m=6.00\:\text{kg}[/tex]

[tex]N = \text{normal force}[/tex]

The net force [tex]F_{net}[/tex] is given by

[tex]F_{net} = N + F_a\sin 20 - mg=0[/tex]

Solving for N, we get

[tex]N = mg - F_a\sin 20[/tex]

[tex]\:\:\:\:\:\:= (6.00\:\text{kg})(9.8\:\text{m/s}^2) - (20.0\:\text{N}\sin 20)[/tex]

[tex]\:\:\:\:\:\:= 52.0\:\text{N}[/tex]

Answer:

1. 588 N

2. 738 N

3. 588 N

Explanation:

time, t = 4 s

initial velocity, u = 0

final velocity, v = 10 m/s

mass, m= 60 kg

1.

Weight of passenger before starts

W =m g = 60 x 9.8 = 588 N

2.

When the elevator is speeding up

v = u + a t

10 = 0 + a x 4

a = 2.5 m/s2

Now the weight is

W' = m (a + g) = 60 (9.8 + 2.5) = 738 N

3.

When he reaches the cruising speed, the weight is

W = 588 N