The reaction is the formation of the product from the reactants. A reaction happens quickest during the beginning of the reaction. Thus, option A is correct.
What are the factors affecting the reaction rate?The reaction rate is the pace at which the reaction takes place and the breakdown or the combination of the reactants to produce the products. The rate of reaction depends on the concentration of the reactants.
The concentration of the reactants is in direct proportion with the rate as at the beginning of a reaction there is a higher amount of substance present than at the end.
As the reaction proceeds, the reactants get consumed and their concentration decreases. As there is a decrease in concentration the rate of the reaction converting and producing the products also decreases.
Therefore, option. the rate of reaction is fast at the beginning.
Learn more about reaction rate here:
https://brainly.com/question/16726097
#SPJ5
nguyên tử sắt có điện tích hạt nhân là 26+. trong nguyên tử, số hạt mang điện nhiều hơn số hạt không mang điện là 22. Hãy xác định số khối của nguyên tử sắt
Answer:
I don't know yr language
How many moles of KOH are there in 27.5 mL of 0.250 M KOH?
Question 2 options:
4.31 × 10−3 mol KOH
6.88 × 10−3 mol KOH
7.24 × 10−3 mol KOH
8.13 × 10−3 mol KOH
9.21 × 10−3 mol KOH
Answer:
6.88 × 10^-3mol
Explanation:
Molarity = number of moles (n) ÷ volume (V)
According to this question, there in 27.5 mL of 0.250 M KOH, the number of moles of KOH can, therefore, be calculated as follows:
number of moles = molarity × volume
Volume of KOH = 27.5mL = 27.5/1000
= 0.0275L
n = 0.0275 × 0.250
n = 0.006875 mol
n = 6.88 × 10^-3mol
If 3.5 kJ of energy are added to a 28.2 g sample of iron at 20 degrees C, what is the final temperature of the iron in kelvins?
295.8k
that is the procedure above
PLEASE HELPP!!!
PLEASE HELP!!!
Write the sentences in your copybook and draw a line through one of the words in
bold to complete each of these sentences about alkali metals correctly.
Alkali metals generally become more / less dense going down the group.
The melting and boiling points of alkali metals increase / decrease down the group.
The softness of alkali metals increases / decreases going down the group.
The speed with which alkali metals react with oxygen increases / decreases going
down the group.
Answer:
vahshahhsjajaiaoakkakakaaosos
Exprese la concentración de una solución de H3PO4 al 30 % en masa y con una densidad de 1.39 g/mL en: M, y N.
Respuesta:
4.26 M; 12.8 N
Explicación:
Primer paso: Calcular la concentración volumétrica (Cv)
Usaremos la siguiente expression.
Cv = Cg × ρ
Cv = 30 g%g × 1.39 g/mL = 41.7 g%mL
Segundo paso: Calcular la molaridad
La concentración volumetrica es 41.7 g%mL, es decir, hay 41.7 gramos de soluto cada 100 mL de solución. Usaremos la siguiente fórmula para molaridad.
M = masa de soluto / masa molar de soluto × litros de solución
M = 41.7 g / 97.99 g/mol × 0.1 L = 4.26 M
Tercer paso: Calcular la normalidad
Usaremos la siguiente fórmula.
N = M × Z
donde Z para un ácido es igual al número de protones.
N = M × Z
N = 4.26 mol/L × 3 eq/mol = 12.8 N
HELLO EVERYONE PLEASE I NEED HELP WITH
Please I REALLY NEED A HELP WITH THIS PLEASE HELP ME
THIS HARRY POTTER LITERARY ESSAY
OUTLINE
1. Love and Friendship is a central theme in Harry Potter and the Philosopher's Stone. Prove that this statement is true using 2(two) different characters from the novel as examples.
Introductory Statement/ Hook:
Statement of Intent: reason A and B :
thesis reason A and B:
BODY PARAGRAPH
#1 Point #1: Introduce REASON A here, but use general statement
#1: Provide quotations from the novel to support Reason A
Explanation #1:
Proof #2:
Explanation #2:
BODY PARAGRAPH
#2 Point #2: Introduce REASON B here, but use general statements
#1: Provide quotations from the novel to support ReasonB
Explanation #1:
Proof #2:
Explanation #2:
CONCLUSION
Restate/ Summarize Thesis:
Restate/ Summarize Points:
Answer:
Ron and Hermoine
Explanation:
They always fought over petty things, but at the end, they did end up together!
(Answer for your question about love and friendship being a central theme in Harry Potter and the Philosopher's stone)
*ALSO, MY ANSWER MIGHT BE WRONG* so be sure to use a pencil just in case!
Draw the following structures and name them :
I. CH3CH2(OH)
II.CH3CH2CH(CH3)C(Cl)2C(l)2CH(F)OH
III.CH3CH(CH3)CHO
IV.CH2=CH(OH)
V.CH3OCH2CH3
Answer:
hope this helps.answer is in the picture
what is the charge on ion X Li2X
In the compound Li2X, there are two lithium ions and one X^2- ion.
Ionic compounds are composed of an ion pair of opposite charge. Usually, the positive ion is a metal cation while the negative ion is a non metal anion. The two ions are held together by strong electrostatic interaction.
In the compound Li2X, there are two lithium ions and one X^2- ions. X^2 -is the non metal anion present.
Learn more: https://brainly.com/question/2673886
The volume of a gas at 6.0 atm is 2.5 L. What is the volume of the gas at 75 atm at
the same temperature? (5 points)
1) 1.0 L
0 2 2) 1.5 L
3) 2.0 L
O 4) 3.0L
The volume of a gas at 6.0 atm is 2.5 L. What is the volume of the gas at 7.5 atm at
the same temperature? (5 points)
1) 1.0 L
2) 1.5 L
3) 2.0 L
4) 3.0L
Answer:
2.0 L
Option C) 2.0L is the correct answer.
Hence, at the same temperature, as the pressure is increased to the given value, the volume of the gas decreases to 2.0L.
Boyle's law
Boyle's law states that "the volume V of a given quantity of gas is inversely proportional to its pressure P as long as temperature remains constant.
Boyle's law is expressed as;
P₁V₁ = P₂V₂
Given the data in the question;
Initial Volume V₁ = 2.5LInitial pressure P₁ = 6.0atmFinal pressure P₂ = 7.5atmFinal volume V₂ = ?To determine the final volume of the gas, we substitute our given values into the expression above.
P₁V₁ = P₂V₂
V₂ = P₁V₁ / P₂
V₂ = ( 6.0atm × 2.5L ) / 7.5atm
V₂ = 15Latm / 7.5atm
V₂ = 2.0L
Option C) 2.0L is the correct answer.
Hence, at the same temperature, as the pressure is increased to the given value, the volume of the gas decreases to 2.0L.
Learn more about Boyle's law here: brainly.com/question/1437490
QUICK CHECK
Use the periodic table to select which type of bond is present and which of the listed properties is most
likely for each substance.
Substance
Type of bond
Likely property
A А
B
A
Cuzm
Ba
lonic
DO
covalent
02
С
D
metallic
Answer:
Coppell zinc,ironic bond
Explanation:
lt will give away two zinc atoms
Answer:
I will go with Sodium chlorine NaCl
plz solve the question and send the answer
I will give u branist, follow u ,rate u 5 star and also give u like ,plz help me
Answer:
64g of [tex]\bold{CH_{3}OH}\dashrightarrow[/tex]44.8L
vapour density of [tex]CH_{3}3OH=\frac{mass}{volume}[/tex] of [tex]\bold{CH_{3}OH}[/tex]
=64/44.8=10/7=1.43 g/l
Vapour density of [tex]\bold{CH_{3}OH}[/tex]=1.43g/l
64g of [tex]\bold{CH_{3}OH => 44.8L }[/tex]
vapour density of [tex]\small{\sf{CH_{3}3OH=\frac{mass}{volume} of } \bold{CH_{3}OH}}[/tex]
=64/44.8=10/7=1.43 g/l
Vapour density of [tex]\bold{CH_{3}OH = 1.43 g/L}[/tex]
Which is another word for 10 meters in the metric system?
Answer:
Dekameter
Explanation:
I need help with question 5
Answer:
B a spring being stretched
What is the pH of a 1.0 x 10-3 M KOH solution?
A. 10
B. 4.0
C. 11
D. 3.0
Answer:
Option C. 11
Explanation:
We'll begin by calculating the concentration of the hydroxide ion [OH¯] in the solution. This can be obtained as follow:
In solution, KOH will dissociate as follow:
KOH (aq) <=> K⁺(aq) + OH¯(aq)
From the balanced equation above,
1 mole of KOH reacted to produce 1 mole of OH¯.
Therefore, 1×10¯³ M KOH will also react to produce 1×10¯³ M OH¯.
Thus, the concentration of hydroxide ion [OH¯] in the solution is 1×10¯³ M
Next, we shall determine the pOH of the solution. This can be obtained as follow:
Concentration of hydroxide ion [OH¯] = 1×10¯³ M
pOH =?
pOH = –Log [OH¯]
pOH = –Log 1×10¯³
pOH = 3
Finally, we shall determine the pH of the solution. This can be obtained as follow:
pOH = 3
pH =?
pH + pOH = 14
pH + 3 = 14
Collect like terms
pH = 14 – 3
pH = 11
How much heat must be transferred to 55 g of ice to change the ice's
temperature from -13°C to -5.0°C? (The specific heat capacity of ice is 2.11
J/g.°C)
2.0 kilograms of lithium hydroxide can “scrub”, or remove, how many liters of carbon dioxide at standard conditions?
Answer:
0.94 L
Explanation:
The equation of the reaction is;
2LiOH + CO2 -----> Li2CO3 + H2O
Number of moles LiOH = 2.0/23.95 g/mol = 0.084 moles
2 moles of LiOH scrubs 22.4 L of CO2
0.084 moles of LiOH scrubs 0.084 moles × 22.4/2
= 0.94 L
If you hit the surface of Iron with a photon of energy and find that the ejected electron has a wavelength of .75 nm, what is the wavelength of the incoming photon in nanometers?
Answer:
The wavelength of the incoming photon is 172.8 nm
Explanation:
The wavelength of the incoming photon can be calculated with the photoelectric equation:
[tex] KE = h\frac{c}{\lambda_{p}} - \phi [/tex] (1)
Where:
KE: is the kinetic energy of the electron
h: is Planck's constant = 6.62x10⁻³⁴ J.s
c: is the speed of light = 3.00x10⁸ m/s
[tex]\lambda_{p}[/tex]: is the wavelength of the photon =?
Φ: is the work function of the surface (Iron) = 4.5 eV
The kinetic energy of the electron is given by:
[tex] KE = \frac{p^{2}}{2m} = \frac{(\frac{h}{\lambda_{e}})^{2}}{2m} [/tex] (2)
Where:
p: is the linear momentum = h/λ
m: is the electron's mass = 9.1x10⁻³¹ kg
[tex]\lambda_{e}[/tex]: is the wavelength of the electron = 0.75 nm = 0.75x10⁻⁹ m
Hence, the wavelength of the photon is:
[tex] \frac{(\frac{h}{\lambda_{e}})^{2}}{2m} = h\frac{c}{\lambda_{p}} - \phi [/tex]
[tex]\lambda_{p} = \frac{hc}{\frac{h^{2}}{2m\lambda_{e}^{2}} + \phi} = \frac{6.62 \cdot 10^{-34} J.s*3.00\cdot 10^{8} m/s}{\frac{(6.62 \cdot 10^{-34} J.s)^{2}}{2*9.1 \cdot 10^{-31} kg*(0.75 \cdot 10^{-9} m)^{2}} + 4.5 eV*\frac{1.602 \cdot 10^{-19} J}{1 eV}} = 1.728 \cdot 10^{-7} m = 172.8 nm[/tex]
Therefore, the wavelength of the incoming photon is 172.8 nm.
I hope it helps you!
Question 8 of 10
Which of the following is made of matter?
A. Light
B. Energy
C. The sun
D. Heat
Answer: i Choose the sun
because it has mass
Explanation: matter is anything that has mass and occupies space / Volume
and the sun has mass though it is not a solid one, and is made up of matter
HOPE THIS HELPSS!!!!
A pupil has drawn the electronic structure of fluorine and the diagram is shown below. However,
mistakes have been made. State three mistakes that have been made.
Fl atomic number: 9
Fl atomic mass: 10
(ps i have two of these but can’t figure out the last)
Answer:
The number of electrons in the orbit is wrong they have to be 9 and not 10since flourine is in group 7 the number of electrons in the outer most shell has to be 7 and not 2the first shell has 8 instead of 2 electronsI hope this helps
Please help me
will give the brainliest!
Explanation:
a) The presence of sulfate ions in a solution can be confirmed by the reaction of barium chloride in an acidic medium.
The balanced chemical equation of the reaction is shown below:
[tex]BaCl_2(aq)+CuSO_4(aq)->CuCl_2(aq)+BaSO_4(s)[/tex]
Hence, the white precipitate is barium sulfate and its formation with the ionic equation is shown below:
[tex]Ba^2^+(aq)+SO_4^2^-(aq)->BaSO_4(aq)[/tex]
b) The presence of copper (II) ions can be confirmed by the following test:
Add potassium iodide solution to copper (II) solution.
Then a white ppt of cuprous iodide along with the liberation of iodine is observed and the entire solution attains brown color.
The chemical equation of the reaction is shown below:
[tex]2CuSO_4(aq)+4KI(aq)->Cu_2I_2(s)+I_2(s)+2K_2SO_4(aq)\\[/tex]
c)(i)Due to this reaction, the blue color of the solution becomes white.
Reddish-brown copper is deposited at the bottom of the container.
(ii)In this reaction, zinc is oxidized.
d) (i) Copper is produced at the cathode.
(ii)[tex]Cu^2^+(aq)+2e^-->Cu(s)[/tex]
(iii) The reaction that takes place at the cathode is reduction.
Reduction is gaining of electrons.
if excess nitrogen gas reacts with 600 cm³ of hydrogen gas at room conditions , calculate the maximum volume of ammonia produced from the reaction? the chemical question is N2 + 3H2 = 2NH3
Answer:
400 cm³ of ammonia, NH₃.
Explanation:
The balanced equation for the reaction is given below:
N₂ + 3H₂ —> 2NH₃
From the balanced equation above,
3 cm³ of H₂ reacted to produce 2 cm³ of NH₃.
Finally, we shall determine the maximum volume of ammonia, NH₃ produced from the reaction. This can be obtained as illustrated below:
From the balanced equation above,
3 cm³ of H₂ reacted to produce 2 cm³ of NH₃.
Therefore, 600 cm³ of H₂ will react to produce = (600 × 2)/3 = 400 cm³ of NH₃.
Thus, 400 cm³ of ammonia, NH₃ were obtained from the reaction.
How many atoms of hydrogen are there in 36 g of NH4?
Answer:
hope it helps you
Explanation:
please like and mark me brainlist
Is this population more likely to grows slowly or quickly in the next 10 years
nobody can say it is uncertain but in my opinion it will grow quickly in the next 10 years
PLEASE HELP QUICK!!! How many molecules are there in 4.00 L of
glucose, C6H1206? Please show your work!!
What must scientists look for in their experiment or their data to make sure it is accurate?
Answer:
Scientists must look in their experiment/data to check for accuracy because they don't want to make any mistakes, and most importantly have to make sure they have the right information to proceed.
Explanation:
^
make a 450 gram solution with the mass by mass concentration of 7% how much salt and water do you need to mix
When it’s summer in the northern hemisphere what Season is it in the Southern Hemisphere
Answer:
Winter
Explanation:
I dont know but whatev
Answer:
Winter
Explanation:
The seasonal cycle in the polar and temperate zones of one hemisphere is opposite to that of the other. Therefore, When it is summer in the Northern Hemisphere, it is winter in the Southern, and vice versa.
hope it helps :)
hii pls help me to write the ionic equation
Answer:
net ionic equation
[tex]\boxed{ SO_4{}^{2-} {}_{(aq.)} + Ba^{2+} {}_{(aq.)} \rightarrow BaSO_4 {}_{(s)}} [/tex]
Which diagram represents this molecule
Answer:
I think it is C
Explanation:
Hope this helps!! :)
If I'm wrong, then greatest apologies
Plants in forests take up carbon dioxide from the atmosphere during photosynthesis. They transform the carbon dioxide into plant material. When plants die, their organic matter is often worked into the soil by decomposers. Some of this organic matter remains within the soil and forest floor, and some of it is taken up by other living things.
Based on this information, what role do forests play in the carbon cycle?
A.
Forests are carbon sinks because they store carbon.
B.
Forests are carbon sinks because they do not absorb carbon dioxide when plants die.
C.
Forests are carbon sources because they emit carbon.
D.
Forests are carbon sources because they can be burned to emit carbon dioxide.
Answer: B. forests are carbon sinks because they store carbon
Explanation:forests take up carbon from the atmosphere through photosynthesis and from organic matter through decomposition. so, forests are carbon sinks because they store carbon
