A new element R shows chemical properties similar to the element sodium. What is the correct formula of a compound formed with R and sulfur?
R₂S
RS₂
RS
R₂S₂​

Answers

Answer 1

Answer:

R2S this is because sodium has one 1 valence and sulfur has valence of 2 so when they combine theyinterchange their valence


Related Questions

Which type of bonds can carbon atoms form with other carbon atoms? (1 point)
O double, triple, and quadruple bonds
O single and double bonds
O double and triple bonds
O single, double, and triple bonds

Answers

Answer:

single, double, and triple bonds

Josefina and Raul were comparing how sound moves through various mediums and how charge moves through conducting wires. They performed experiments to find out if the factors that determine the speed of sound are the same as those that determine the flow in a circuit. What did they find? Describe two things that they found. For each, explain how the speed of sound and flow of current are affected

Answers

They found that difference occurs in the speed of both sound and charges occur due to the difference in the type of medium.

Sound and charges needs specific medium for faster movement i.e. sound moves faster in solid as compared to liquid and gas whereas charges moves faster and easily in gold due to lower resistance which is followed by copper. Sound can move from solid, liquid and gases whereas charges move only in solid metal in which free electrons are present. The speed of sound and flow of current are affected due to difference in the arrangement of atoms in solid, liquid and gas.

https://brainly.com/question/24373020

An atom has mass number 23 and atomic number 11.
a) How many electrons are revolving around the nucleus?
b) How many electron shells are there in the atom?

Answers

A): The closest orbital to the nucleus, called the 1s orbital, can hold up to two electrons. This orbital is equivalent to the innermost electron shell of the Bohr model of the atom. It is called the 1s orbital because it is spherical around the nucleus. The 1s orbital is always filled before any other orbital.

Given:
- Mass number of atom = 23
- Atomic number of atom = 11

As, the number of electrons in an atom is equal to an atomic number of the element.

So, number of electrons = 11

Secondly , number of protons are equal to number of electrons.

So, number of protons = 11

And number of neutrons = mass number - atomic number = 23−11 = 12

So, number of neutrons = 12

Thus , the atom contains 11 protons, 11 electrons, 12 neutrons.

In the compound Ni2O3, nickel's oxidation number is_____
oxidation number is -2.
and oxygen's

Answers

Answer:

+3

Explanation:

The name of this compound would be nickel (III) oxide. Oxygen typically has a charge of -2. Given there are 3 oxygen atoms, that would equal a charge of -6. The nickel is the cation and must equal the charge of the anion, so must have a charge of +6. Since there are 2 nickel atoms, the charge on each must be +3.

15. The starting diol for this molecule is
O A. ethanol.
O B. propan-1,3-dioic acid.
O C. propan-1,3-diol.
O D. ethan-1,2-diol.

Answers

Answer with explanation

The starting diol for this molecule is :-The starting diol for this molecule is :-D) ethan-1,2-diol.

Hope my answer is helpful to you ☺️

PLS HELP!! WILL MARK BRAINLIEST! 99 POINTS!

Answers

You're going to first balance the chemical equation.

After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.

After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.

You're going to first balance the chemical equation.

After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.

After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.

career in chemistry list ten

Answers

Answer:

Analytical Chemist

Forensics

Toxicologist

Biochemist

Chemical Engineer

Laboratory Technician

Pharmacologist

Chemical Technician

Materials Scientist

Environmental Chemist

Research scientist
Chemical engineer
Toxicologist
Analytical chemist
Chemistry teacher
Forensic scientist
Hazardous waste chemist
Water chemist
Geochemist
Pharmacologist

what is electrolysis ​

Answers

Answer:

Electrolysis is commercially important as a stage in the separation of elements from naturally occurring sources such as ores using an electrolytic cell

What information does the specific heat capacity give about a substance?
A. How much energy is needed to raise its temperature
B. How much heat is released when it changes phases
C. How much energy is needed to overcome an activation energy
O
0
D. How much heat is stored in its chemical bonds

Answers

Specific heat capacity tells about how  much energy is needed to raise its temperature.

What is specific heat capacity?

Specific heat capacity is defined as the amount of energy required to raise the temperature of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.

It varies with temperature and is different for each state of matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.

It is given by the formula ,

Q=mcΔT

Learn more about specific heat capacity,here:

https://brainly.com/question/29766819

#SPJ1

what is mean by vector​

Answers

Answer:

A quantity having direction as well as magnitude is called vector.

Elements in the same period Question 7 options: A) form bonds with the same type of elements. B) have the same number of protons. C) have the same number of valence electrons. D) have the same principal quantum number.

Answers

D is the answer .. I have send u pic also

The compound KOH is ________. insoluble, because all compounds containing K are insoluble insoluble, because all compounds containing OH- are in soluble soluble, because all compounds containing K are soluble soluble, because all compounds containing OH- are soluble insoluble, because KOH is insoluble

Answers

Answer:

soluble because all compounds containing K are soluble

Explanation:

Most metal hydroxides are insoluble. However, alkali metal hydroxides (such as KOH and NaOH) are very soluble.

In the case of KOH, the K cation is attracted to the electronegative oxygen on water. The OH anion is capable of hydrogen bonding to the water. (Notice how OH⁻ is simply the deprotonated form of water.)

The compound KOH is soluble insoluble, because all compounds containing K are insoluble insoluble, because all compounds containing OH- are in soluble soluble, because all compounds containing K are soluble soluble, because all compounds containing OH- are soluble insoluble, because KOH is insoluble

What are alkalis?

Alkalis are bases which are soluble in water. The basic alkalis are as follows:

KOHNaOHCa(OH)2

Mg(OH)2 is insoluble in water.

In conclusion, KOH is a soluble base

Learn more about alkalis:

https://brainly.com/question/25317545

what is mean by measurement​

Answers

Answer:

Measurement is defined as the act of measuring or the size of something. An example of measurement means the use of a ruler to determine the length of a piece of paper. ... Extent, quality, or size as determined by measuring; dimension. A waist measurement of 32 inches.

Explanation:

The comparison o unknown quantity with known standard quantity is called measurement.

What is occurring during the flat section of the graph below on the red arrow labeled boiling, between liquid and gas? gas (3.) OO liquid temperature solid time (minutes) O A. Heat is being absorbed, allowing particles of the liquid to overcome the atmospheric pressure. B. Heat is being absorbed, allowing particles of the liquid to overcome the vapor pressure. C. Heat is being released, allowing particles of liquid to overcome the pressure, and is why the temp does not increase. D. The temperature is no longer increasing even though heat is still being added because the heat is being absorbed to lower the melting point​

Answers

Heat is been absorb allowing particles of the liquid to overcome the vapor pressure

Which coefficient of O2 is needed to balance the equation C3H8 + O2 → 3CO2 + 4H2O?
A.
2
B.
3
C.
5
D.
6

Answers

The answer is C. 5

Hope I helped

What are differences between viruses and bacteria?

Answers

Answer:

viruses are computer program that replicate itself and distribute itself to another computer but bacteria is micro organism that contaminate our food and can make us sick

Isotopes are atoms that have the same mass number, but different numbers.
atomic. True or false

Answers

Answer: Im not sure but I think it is false.

Explanation:

Al wonders if adding salt to water will affect how long it takes the water to
freeze. Al thinks that salt water will freeze more quickly than fresh water.
He decides to check his hypothesis by conducting an experiment. Al takes
two ice trays and fills one with distilled water and the other with distilled
water that has two tablespoons of salt added. He makes sure he puts
exactly the same amount of water in each ice tray. Al takes the trays and
puts them side by side in the freezer. Al checks the ice trays every 10
minutes to see if the water in each tray has begun to freeze. Al finds that
after 20 minutes the water in the ice tray without the salt has started to
form ice, while the ice tray with the salt water is still completely liquid.
Ku

Answers

The hypothesis is that salt water freezes faster than fresh water.

The dependent variable is time taken for ice to appear.

The independent variable is presence or absence of salt

The constants are the amount of water in each tray, freezing conditions and length of time of exposure to freezing condition.

The control group is the tray to which salt was not added

The experimental group is the tray to which salt was added

The presence of solutes in a solution causes the freezing point depression.

A solution is made up of a solute and a solvent. In the presence of a solute, the freezing point of a pure solvent is decreased. This is because freezing point is a colligative property.

Colligative properties depend on the amount of solute present.

Hence, the pure water freezes faster (ice begin to appear earlier) than the salt water.

The hypothesis put forward in this experiment was found to be invalid by the experiment.

For more about colligative properties, see

https://brainly.com/question/10323760

What would you use to measure the height of a sample?

Question 2 options:

ruler


beaker


graduated cylinder


electronic balance

Answers

Answer:

please clear ur ques with image

it's unable to be understood

...

with balanced chemical equations, show the different stages of fermentation​

Answers

Answer:

formula for fermentation is: C6H12O6 → 2 C2H5OH + 2 CO.

equation for the reaction btn nitric acid and metal X whose valence is 3​

Answers

(a) Reaction of nitric acid with non-metal:
C+4HNO
3

⟶CO
2

+2H
2

O+4NO
2


S+6HNO
3

⟶H
2

SO
4

+2H
2

O+6NO
2


(b) Nitric acid showing acidic character:
K
2

O+2HNO
3

⟶2KNO
3

+H
2

O
ZnO+2HNO
3

⟶Zn(NO
3

)
2

+H
2

O
(c) Nitric acid acting as oxidizing agent
P
4

+20HNO
3

⟶4H
3

PO
4

+4H
2

O+20NO
2


3Zn+8HNO
3

⟶3Zn(NO
3

)
2

+4H
2

O+2NO

hope that helps you please mark brainliest

Cuales son los tipos de yemas

Answers

Tipos de yemas son terminal, cuando está ubicada en la punta de una ramilla;
axilar, cuando está ubicada en la axila de una hoja (también denominadas laterales);
adventicia, cuando ocurre en los demás lugares, por ejemplo en el tronco o en las raíces.

from the equation 2PbO + C = 2Pb + CO2, detemine which one is reactant is oxidised and which is reduced.​

Answers

Answer:

Explanation:

C is oxidised because C up to C+4

PbO is reduced because PbO from Pb2+ down to Pb0

Answer:

lead (Pb) is reduced carbon is oxidized

If you started with 2 moles of Nitrogen and 3 moles of Hydrogen, then you
would not have any leftover reactants. Explain which material would be
limiting since no hydrogen or nitrogen were left over?

N2 + 3H2 -> 2NH3

Answers

Answer: 0.3 moles NH3

Explanation:

Please help :)
A chocolate chip cookie recipe calls for 0.050 moles of baking soda (NaHCO3). How many grams should the chef mass out?

Answers

Answer: 4.2 g

Explanation:

Note that the number of moles is equal to the actual given mass of the substance over its molar mass.

n = m/M, where n is the moles, m is the given mass, M is the molar mass.

In manipulating this formula, you get that the given mass is equal to the number of moles multiplied by the molar mass of substance.

m = n x M.

(Na = 23, H = 1, C = 12, O = 16)

Molar mass = 23 + 1 + 12 + (16x3)

= 84

1) m = 0.050 x 84
2) m = 4.2 g

Hope this helps, brainliest would be appreciated :)

According to the mole concept, 4.2 g of baking soda should be weighed out.

What is mole concept?

Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.

It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.

It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass  in grams present in one mole  of atoms is its atomic mass.

Baking soda has molar mass of 84 g /mole, thus mass is calculated using number of moles formula which is mass= molar mass×number of moles, which is mass=84×0.050=4.2 g.

Thus,4.2 g of baking soda should be weighed out by chef.

Learn more about mole concept,here:

https://brainly.com/question/12805690

#SPJ2

Which state of matter has particles that vibrate and can change place but remain touching in a random arrangement.
A. Liquid
B. None of these
C. Plasma
D. Gas

Answers

The particles in the solid are touching with very little space between them. The particles in a liquid usually are still touching but there are some spaces between them. The gas particles have big distances between them.

...

Liquids Solids and Gases:

NON OF THESE

How does the chemistry of the ocean change in response to high levels of CO2 in the atmosphere?

Answers

Ocean acidification is occurring because excess carbon dioxide (CO2) in the atmosphere is being absorbed at the surface of the ocean at an increasing rate. This excess CO2 results in more hydrogen ions, which increases the acidity of the ocean.

If the magnet loses its superconducting properties, all of the liquid helium could suddenly turn to a gas. If an MRI machine contains 1950 L liquid He with a density of 0.125g/mL, how many liters of He gas would be formed at 25°C and 1 atm? Use the ideal gas law. Round your final answer to two significant figures. Show your work. (4 points)

Answers

Answer:

Determine the volume of helium gas

Answer:

About 1,495 Liters of Helium.

Explanation:

To calculate the volume of helium gas formed when the magnet loses its superconducting properties, we can use the ideal gas law:

PV = nRT

Where:

P = Pressure (in atm)

V = Volume (in liters)

n = Number of moles of helium gas

R = Ideal gas constant (0.0821 L.atm/(mol.K))

T = Temperature (in Kelvin)

First, we need to find the number of moles of helium gas:

Given volume of liquid helium (V_liquid) = 1950 L

Density of liquid helium (ρ) = 0.125 g/mL = 0.125 g/cm³

To convert density from g/cm³ to g/L, we multiply by 1000:

Density of liquid helium (ρ) = 0.125 g/cm³ * 1000 cm³/L = 125 g/L

Mass of liquid helium (m) = Volume * Density = 1950 L * 125 g/L = 243,750 g

Next, we need to convert the mass of liquid helium to moles using the molar mass of helium:

Molar mass of helium (M) = 4.0026 g/mol

Number of moles (n) = Mass / Molar mass = 243,750 g / 4.0026 g/mol ≈ 60,907 mol

Now, we have the number of moles of helium gas (n), and we can calculate the volume of helium gas (V_gas) at 25°C (298.15 K) and 1 atm:

P = 1 atm

T = 25°C = 298.15 K

V_gas = nRT / P

V_gas = (60,907 mol) * (0.0821 L.atm/(mol.K)) * (298.15 K) / (1 atm)

V_gas ≈ 1,495 L

Therefore, approximately 1,495 liters of helium gas would be formed at 25°C and 1 atm when the magnet loses its superconducting properties.

what's the atomic weight of salt ?

Answers

Answer:

58.44 g/mol

Explanation:

58.44 g/mol

One formula unit of sodium chloride (NaCl) would weigh 58.44 amu

prove thatp=dgh prove that P is equals to Dgh ​

Answers

Answer:

i hope it will help you

Explanation:

mark me as a brainlest answer

Other Questions
Which of the following best describes the number below square root of -7A. Perfect squareB.composite C.imaginary D.positive Find the area Help me please Write the role of transportation and communication as the infrastructure of development How like a winter hath my absence beenFrom thee, the pleasure of the fleeting year!What freezings have I felt, what dark days seen!What old December's bareness every where!And yet this time removed was summer's time;The teeming autumn, big with rich increase,Bearing the wanton burden of the prime,Like widow'd wombs after their lords' decease:Yet this abundant issue seem'd to meBut hope of orphans and unfather'd fruit;For summer and his pleasures wait on thee,And, thou away, the very birds are mute;Or, if they sing, 'tis with so dull a cheerThat leaves look pale, dreading the winter's near.What type of poem is this? A cylindrical container with a cross sectional area of 65.2 cm^2 holds a fluid of density 806 kg/m^3. At the bottom of the container the pressure is 116 kPa. (a) What is the depth of the fluid? (b) Find the pressure at the bottom of the container after an additional 2.05 X 10^-3 m^3 of this fluid is added to the container. Assume that no fluid spills out of the container. It is a drawing which only the contours of a product are seen, thus emphasizing scale of a design.A. Sketching B. ShadingC. OutliningD. Carving An ice skater with a mass of 50 kg is gliding acrossthe ice at a speed of 8 m/s when herfriend comes up from behind and gives her a push,causing her speed to increase to 12m/s. How much work did the friend do on the skater pleeeeaaasssseeeee help Write a newspaper report on the last Tsunami that occurred in India Help me please I really need this tomorrow The enthalpy of a reaction is -394 kJ/mol. How would you describe thereaction?A. SpontaneousB. ExothermicC. EndothermicD. Nonspontaneous Felicity draws this diagram on the board to explain oneof Mendel's experiments for her classmates. She saysthat it shows the cross between two first-generationoffspring. What is the error in her diagram?Allpeas should be green.All peas should be yellow-green.One pea should be green and three peas should beyellow.O One pea should be yellow and three peas shouldbe green. Can someone help me with this math homework please! For any real number a a- |allal.-a M=F+Frtsolve for t... What does "solve an equation" mean? Investment interest expense includes: A. interest expense from loans to purchase corporate bonds and interest expense from loans to purchase stocks. B. interest expense from loans to purchase corporate bonds. C. interest expense from loans to purchase municipal bonds. D. interest expense from loans to purchase municipal bonds and interest expense from loans to purchase corporate bonds. E. interest expense from loans to purchase stocks. The chemical formula is different from the empirical formula in When addiction escalate and the individual lose his or her job or drop out of school,_____A) legal matters dont matterB) they have more time in their day to do what is really importantC) money will never be an issue D) this is a sign of serious problem Which of the following represents the divisor and the dividend for thesynthetic division problem below?