A ford is traveling with a speed of 15m/s and is 200 meters ahead of a Chevy that is traveling in the same direction but at a speed of 20m/s. How far will the chevy travel before catching up to the Ford?

Answers

Answer 1

The Chevy will travel a distance f about 600m before catching up with the ford in the same direction of the motion.

The ford if travelling at 15m/s and it is 200 m ahead of the Chevy that is travelling in the same direction with a speed of 20m/s.

Now, we can use velocity = distance/time here,

Time of ford will be equal to the time of Chevy,

Time of ford = Distance/velocity of ford

Time of ford = S/15

Now, for the Chevy, the distance will be 200 more and the time will be same, so we will write,

Time of Chevy = (S+200)/20

(S+200)/20 = S/15

15S + 3000 = 20S

5S = -2000

S = -400m

Negative sign is showing the direction of the motion only, so we can ignore that.

So, the Chevy will travel 600 m before catching up with the ford.

To know more about speed, visit,

https://brainly.com/question/13943409

#SPJ4


Related Questions

The diffraction limit of a 4-meter telescope is _________ than that of a 2-meter telescope.
a) two times larger
b) four times larger
c) four times smaller
d) two times smaller
e) It depends on the type of telescope.

Answers

The diffraction limit of a 4-meter telescope is two times smaller than that of a 2-meter telescope.

The diffraction limit of a telescope is the minimum distance between two objects so that they can still be viewed as separate from one another. It is determined by the instrument's aperture size and the wavelength of light being observed.

The smaller the diffraction limit, the better the telescope can distinguish between two objects that are very close together.

In simpler terms, the diffraction limit refers to the smallest object size that a telescope can observe. This is known as angular resolution, which is determined by the telescope's aperture size and the wavelength of light being observed.

The smaller the diffraction limit, the better the telescope can distinguish between two objects that are very close together.

Therefore, a 4-meter telescope has a smaller diffraction limit than a 2-meter telescope. Hence, the answer is two times smaller.

Learn more about Diffraction limit here:

brainly.com/question/15081792

#SPJ11

if two identical wires carrying a certain current in the same direction are placed parallel to each other, they will experience a force of repulsion. select one: a. true b. false

Answers

The given statement "If two identical wires carrying a certain current in the same direction are placed parallel to each other, then they will experience a force of repulsion" is true. This can be explained through Lenz's law.

What is Lenz's law?

Two parallel wires which are carrying the same magnitude of current in the same direction experience a force of repulsion due to the electric currents in each of the wire which are creating a magnetic field in the same direction. This force of repulsion is known as the Lenz's Law.

When two identical wires are carrying a certain magnitude of electric current in the same direction and these are placed in parallel to each other, then they will experience a force of repulsion. This is due to the principle of the electromagnetic force and Lenz's law. When the two current-carrying wires are kept near each other, then they exert force on each other, and that force is called as the force of repulsion or the force of attraction depending on the direction of the current flowing through the wire. The direction of the force is given by the Fleming's left-hand rule, which is the most common way to determine the direction of the force in such cases.

Learn more about Electric current here:

https://brainly.com/question/2264542


#SPJ11

A scientist is studying an organism that is similar to early life on Earth. The scientist observes structures form in the organism that appear as oily spheres with an inner fluid. Of which type of macromolecule is the sphere made? carbohydrate lipid nucleic acid protein

Answers

The structure described by the scientist, which is an oily sphere with an inner fluid, is most likely a lipid vesicle.

Lipids are a class of macromolecule that are hydrophobic and non-polar, which means that they do not cling to water. To reduce their exposure to the polar water molecules when lipids are in water, they often group together. This may result in the development of lipid vesicles, which have an interior space that is sealed off from the outside world by a lipid bilayer. Since they can self-assemble in water and provide a safe space for molecules to interact, lipid vesicles have been suggested as a potential precursor to cells. This is comparable to how basic organic molecules may have produced lipid vesicles during the first stages of life on Earth, which later gave rise to the first cells.

Learn more about  scientist here:

https://brainly.com/question/17450573

#SPJ4

Which of these stars has the greatest surface temperature? a. a main-sequence B star. b. a supergiant A star. c. a giant K star.

Answers

Main-sequence B star has the greatest surface temperature. The correct answer is a.

The surface temperature of a star is closely related to its spectral classification, which is determined by analyzing the star's spectrum. The temperature of a star's surface affects its color, with hotter stars appearing bluer and cooler stars appearing redder. Main-sequence stars are stars that are fusing hydrogen into helium in their cores.

The temperature of a star's surface depends on its spectral class, which is determined by its temperature. B stars are hotter than A stars, K stars are cooler than A stars, and supergiant stars are generally cooler than main-sequence stars of the same spectral class. Therefore,  option a, a main-sequence B star has the highest surface temperature of the three options given.

To know more about stars, here

brainly.com/question/31116168

#SPJ4

what is the power, in terms of p0 , dissipated by this circuit? express your answer in terms of p0 .

Answers

The power, in terms of p0, dissipated by the given circuit is equal to 0.06p0².

Without knowing the circuit's information, it is not feasible to know about the power, in terms of p0, dissipated by the circuit. Let us consider an instance that the circuit the following:

Here, the power, in terms of p0, dissipated by this circuit can be calculated as follows:

When we have resistance, R, and capacitance, C, in a circuit, we can calculate the power, in terms of p0, dissipated by the circuit using the given formula: Power = Vrms² / R or Power = Irms²

Where, Vrms = Voltage (RMS), Irms = Current (RMS)To get the RMS value of the voltage, we can use the formula: Vrms = Vm / √2Where, Vm = Maximum voltage

To get the RMS value of the current, we can use the formula: Irms = Im / √2

Where, Im = Maximum current

The given circuit can be solved as follows: Irms = Vrms / XC

Where XC is the capacitive reactance.XC = 1 / (2πfC)

Where f is the frequency and C is the capacitance of the circuit. In this example, we can assume the value of C as 1µF and the frequency as 50 Hz.

Thus, XC = 1 / (2π x 50 x 1 x 10⁻⁶) ≈ 3183.1Ω

Let the value of R be 1000Ω.

Substituting these values in the equation for Irms, Irms = 10 / √(1000² + 3183.1²) ≈ 2.984mAIrms² = (2.984 x 10⁻³)² ≈ 8.905 x 10⁻⁶ Watts

To find Vrms, Vm is required.

Let us consider Vm = 300V. Thus, Vrms = 300 / √2 ≈ 212.13V

Power, in terms of p0, dissipated by this circuit = Irms² R≈ 8.905 x 10⁻⁶ x 1000 = 0.008905 WIn terms of p0,

the power dissipated by the circuit = 0.06p0².

Learn more about power it at brainly.com/question/29575208

#SPJ11

how many electrons are there in a 30.0 cm length of 12-gauge copper wire (diameter 2.05 mm )? express your answer using two significant figures.

Answers

There are 7.86 x 10²³ electrons in a 30.0 cm length of 12-gauge copper wire with a diameter of 2.05 mm.

To calculate the number of electrons in a 30.0 cm length of 12-gauge copper wire (diameter 2.05 mm), you can use the following equation:

n = ρV / m

where:

n is the number of electrons.ρ is the density of copper (8.96 g/cm³).V is the volume of the wire. m is the mass of one copper atom.

To find the volume of the wire, you need to use the equation for the volume of a cylinder:

V = πr²h

Where:

r is the radius of the wire (1.025 mm). h is the length of the wire (30.0 cm).

Therefore, V = π(1.025 mm)²(30.0 cm) = 9.30 cm³The mass of one copper atom is 63.55 g/mol or 1.054 x 10⁻²² g. To find m, you need to use Avogadro's number (6.02 x 10^23 atoms/mol):m = (63.55 g/mol) / (6.02 x 10^23 atoms/mol) = 1.055 x 10⁻²² g

Now, you can plug in the values:

n = (8.96 g/cm³)(9.30 cm³) / (1.055 x 10⁻²² g) = 7.86 x 10²³ electrons

Therefore, there are 7.86 x 10²³ electrons in a 30.0 cm length of 12-gauge copper wire with a diameter of 2.05 mm. This should be rounded to 2 significant figures, so the final answer is 7.9 x 10²³ electrons.

Learn more about electrons: https://brainly.com/question/26084288

#SPJ11

What is more important in determining the amount of damage an object sustains in a collision? 1. the total momentum change per unit time 2. the total momentum change 3. Both 1 and 2 4. None of these

Answers

3.) the total momentum change per unit of time, and the total momentum change are both important in determining the amount of damage an object sustains in a collision.

The amount of damage an object receives in a collision depends on both the overall momentum change and the momentum change per unit of time. The mass and velocity of the objects colliding determine the total momentum change, which is a measure of the force of impact. The impulse, also known as the change in momentum per unit of time, is equally significant. This gauges how long an impact lasts and how the force is applied throughout that time. Impacts that last longer and exert less force can cause less harm than impacts that last less time and exert more force. The specific factors that contribute to damage will depend on the details of the collision, such as the speed, mass, and shape of the objects involved.

learn more about momentum change here:

https://brainly.com/question/30157362

#SPJ4

a car weighing 12,500 n starts from rest and accelerates to 83.0 km/h in 5.00 s. the friction force is 1350 n. find the applied force produced by the engine

Answers

The applied force for the engine will be 24,450 N.

The applied force produced by the engine for a car weighing 12,500 n starting from rest and accelerating to 83.0 km/h in 5.00 s with a friction force of 1350 n is:

Applied force = (Mass x Acceleration) - Friction force

Applied force = (12,500 N x (83.0 km/h / 5.00 s)) - 1350 N

Applied force = 25,800 - 1350 N

Applied force = 24,450 N

To learn more about force, click here:

https://brainly.com/question/12970081

#SPJ11

A block slides down a frictionless plane having an inclination of θ=15.00. The block starts from rest at the top, and the length of the incline is 2.00m. (a) Draw a free-body diagram of the block. Find (b) the acceleration of the block and (c) its speed when it reaches the bottom of the incline.

Answers

(a) Free-body diagram of block is as given below. (b) Acceleration of the block is 2.529 m/s². (c) Speed of the block when it reaches the bottom of the incline is 3.18 m/s.

What is frictionless surface?

Frictionless surface is an invented concept of surface that is based on imagination and creative ideas of scientists where assumed friction of surface is zero.

(a) Free-body diagram of block is:

            /|

           / |

          /  | m

         / θ |

        /    |

       /_____|

        f ||

          ||

          ||

          ||

          \/

where m is mass of the block, θ is angle of inclination, f is force of friction (which is zero in this case), and g is acceleration due to gravity acting vertically downwards.

(b) The force acting along incline is component of the weight of block parallel to the incline, given by mg sin θ, where m is the mass of the block and g is acceleration due to gravity. Since there is no friction, this force is equal to net force acting on block, which is ma, where a is acceleration of block along the incline. Therefore,

mg sin θ = ma

a = g sin θ

a = 9.81 m/s² * sin 15.00 = 2.529 m/s²

Therefore, the acceleration of the block is 2.529 m/s².

(c) v² = u² + 2as

where u is the initial velocity (which is zero), s is the displacement (which is 2.00 m along the incline), and a is the acceleration (2.529 m/s²). Solving for v, we get:

v = √(2as) = √(2 * 2.00 m * 2.529 m/s²) = 3.18 m/s

Hence, speed of block when it reaches bottom of incline is 3.18 m/s.

To know more about frictionless surface, refer

https://brainly.com/question/25825478

#SPJ1

The electric resistance of the element in a platinum resistance thermometer at 100°C, 0°C and room temperature are 75. 000, 63. 000 and 64. 992 ohms respectively. Use these data to determine the room temperature

Answers

The room temperature is approximately 0.95°C.

Rt = Ro[1 + A(Tt - To) + B(Tt - To)2]

75,000 = Ro[1 + A(100 - To) + B(100 - To)2]

64,992 = Ro[1 + A(25 - To) + B(25 - To)2]

Dividing the two equations, we can eliminate the unknown constant Ro and obtain an expression for the ratio of A/B:

75,000 / 64,992 = [1 + A(100 - To) + B(100 - To)2] / [1 + A(25 - To) + B(25 - To)2]

Simplifying and rearranging, we get:

A/B = [1 + (100 - To)(64,992/75,000) - (25 - To)] / [(100 - To)2 - (25 - To)2(64,992/75,000)]

Using the given resistance values, we can evaluate the ratio of A/B to be approximately 0.00386.

63,000 = Ro[1 + 0.00386(0 - To) + B(0 - To)2]

Simplifying and solving for To, we get:

To ≈ 0.95°C

Resistance is a property of materials that opposes the flow of electrical current. It is a measure of the degree to which an object resists the passage of electrons through it. Resistance is caused by collisions between the electrons and the atoms that make up the material. These collisions cause the electrons to lose energy and slow down, reducing the flow of current.

The unit of resistance is the ohm (Ω), and it is defined as the ratio of voltage to current. Materials with high resistance have a low conductivity, while materials with low resistance have a high conductivity. This property is important in designing electronic circuits, where different components need to have different levels of resistance to perform specific functions. Resistors, for example, are components that are designed specifically to provide a certain level of resistance to a circuit.

To learn more about Resistance visit here:

brainly.com/question/30799966

#SPJ4

Help needed
You are given two waves, a transverse wave that moves to the right f1(x) and a transverse wave that moves to the left f2(x), on a string. As the problem begins, the wave f1(x) is moving to the right at v1 = +1 m/s and the wave f2(x) is moving to the left at v2 = −1 m/s.
wave interferance

Answers

At every location along the string, the amplitudes of two waves that interfere with one another are added. The two separate waves combine to form the final wave.

Two transverse waves are present in this instance, one traveling to the right and the other to the left. The waves will interact destructively when they meet since their motions are in opposition.

Transverse waves

The resultant wave f(x) at any point x on the string may be calculated by summing the two amplitudes if we let f1(x) represent the amplitude of the wave going to the right and f2(x) represent the amplitude of the wave moving to the left:

f(x) = f1(x) + f2(x)

The amplitudes of the two waves will be equal in size and facing in opposite directions when they collide. As a result, the amplitude that results will be zero, and the string will then be at rest.

The resulting wave will alternate between constructive and destructive interference as the waves continue to travel past one another.

As a result, the string will develop a pattern of nodes (points of zero displacements) and antinodes (points of maximum displacement).

The combined frequency and wavelength of the various waves as well as the rate of wave propagation along the string will determine the final wave's frequency and wavelength.

learn more about transverse waves here

https://brainly.com/question/15531840

#SPJ1

Which of the following nuclear fuels does a one solar mass star use over the course of its entire evolution?A. hydrogen and heliumB. hydrogen, helium, carbon, and neonC. hydrogenD. hydrogen, helium, carbon, neon, and oxygenE. hydrogen, helium and carbon

Answers

A one solar mass star uses Hydrogen as nuclear fuel over the course of its entire evolution.

Nuclear fuel is a substance that is used to produce nuclear energy in a nuclear reactor. Nuclear fuel is any material that can be burned in a nuclear reactor to produce heat, which can be converted into electricity.

Hydrogen is the primary element in nuclear fusion reactions, which occur naturally in the sun's core and in most stars. Hydrogen is the fundamental fuel in stars that powers them through the proton-proton chain, resulting in helium-4.

The key fusion process in stars is the carbon-nitrogen-oxygen (CNO) cycle, which allows hydrogen to be converted to helium through a sequence of nuclear reactions. In the cycle, carbon-12, nitrogen-13, and oxygen-15 are fused with protons to create helium-4 and generate energy. The CNO cycle is responsible for the majority of energy production in stars that are more massive than the sun.

Hence, the answer is Hydrogen.

To know more about Nuclear Fusion, refer here:

https://brainly.com/question/12701636#

#SPJ11

Determine the relationship which governs the velocities of the three cylinders, and state the number of degrees of freedom. Express all velocities as positive down.

If vA = 2. 47 m/s and vC = 1. 08 m/s, what is the velocity of B?

Answers

If v_A = 2. 47 m/s and v_C = 1. 08 m/s, So the velocity of B is -1.1575 m/s.

Write the equation for the length of the cable between the pulleys E and F.

[tex]L_1[/tex] = a+2y+π[tex]r_2[/tex]+ π[tex]r_1[/tex] + x

Differentiate the equation with respect to time.

0=2y+x

Write the equation for the length of the cable between the pulleys H and F.

[tex]L_2[/tex] = p +π[tex]r_4[/tex]+z+π[tex]r_3[/tex] +(z - y)

= p +π[tex]r_4[/tex] +2z+π[tex]r_3[/tex] - y

Differentiate the equation with respect to time.

0 = p + 2ż - y

y=p+2ż

x+2y=0

x+2(p+2ż)=0

x+2p+4z=0

[tex]v_A[/tex]+2[tex]v_c[/tex]+4[tex]v_B[/tex]=0

(2.47)+2(1.08)+4[tex]v_B[/tex] = 0

[tex]v_B = - \frac{ ((2.47)+2(1.08))}{4}[/tex]

[tex]v_B[/tex] = -1.1575 m/s

As two variables are required to specify the positions of all parts of

the system, y=p+2ż

DOF = 2

Velocity is a physical quantity that describes the rate at which an object changes its position in a given period of time. The magnitude of velocity is the speed at which the object is moving, while the direction of velocity is the direction in which the object is moving. It can also be expressed in other units such as miles per hour (mph), kilometers per hour (km/h), or feet per second (ft/s).

Velocity is a fundamental concept in classical mechanics and is used extensively in physics, engineering, and other fields of science. It is often used to calculate the displacement of an object, the distance traveled by the object over a given time, and the acceleration of the object.

To learn more about Velocity visit here:

brainly.com/question/28738284

#SPJ4

I need the question of this page filled with steps...... I'm confused

Answers

i) The velocity of the particle at 17 sec is 17m/s.

ii) The total distance travelled is 190 m.

iii) The total displacement is -10m.

What is the difference between distance and displacement?

Distance is the length of any path connecting any two places. As measured along the shortest path between any two points, displacement is the direct distance between them.

The direction is ignored when calculating distance. The direction is accounted for in the displacement calculation.

Since it solely depends on magnitude and not direction, distance is a scalar number. Since displacement varies on both magnitude and direction, it is a vector quantity.

Distance provides specific directions that must be taken when moving from one location to another. Displacement only provides a partial description of the route because it pertains to the quickest way.

Velocity of particle = Slope of the object =Δ [tex]\frac{y}{x}[/tex]

Velocity = [tex]\frac{95-10}{20-15}[/tex] = 17m/s

To know more about Displacement, visit:

https://brainly.com/question/11934397

#SPJ1

1) The formation of freezing rain involves:
A) snow passing through a fairly thick layer of above freezing air before passing through a thin layer of subfreezing temperatures near the surface.
B) air temperatures decreasing uniformly with height, producing the cold conditions necessary for freezing rain formation.
C) air temperatures increasing uniformly with height, producing the cold conditions necessary for freezing rain formation.
D) snow passing through a fairly thin layer of above freezing air before passing through a thick layer of subfreezing
temperatures near the surface.

Answers

Do dodoif epwowdidn’t d B is the answer

(a) Find the current in an 8.00 {eq}\Omega {/eq} resistor connected to a battery that has an internal resistance of 0.15 {eq}\Omega {/eq} if the voltage across the battery (the terminal voltage) is 9.00 V.
(b) What is the emf of the battery?

Answers

(a) The current in the 8.00 Ω resistor connected to a battery that has an internal resistance of 0.15 Ω and a terminal voltage of 9.00 V is 1.0 A.

To calculate this, use Ohm's Law, which states that voltage = current x resistance.

Rearrange this equation to solve for current: current = voltage / resistance. Plug in the values for voltage and resistance to get:

current = 9.00 V / 8.00 Ω + 0.15 Ω = 1.0 A.

(b) The EMF (electromotive force) of the battery is 9.00 V. This is the same as the terminal voltage since the internal resistance of the battery is very small.

Learn more about resistance at : https://brainly.com/question/24119414

#SPJ11

a charge is passing through a static magnetic field. the velocity of the charge makes a 90o angle with the field. the force exerted by the magnetic field does work on the charge.

Answers

The statement is True, A charge is passing through a static magnetic field. the velocity of the charge makes a 90o angle with the field. the force exerted by the magnetic field does work on the charge.

The magnetic force exerted on a moving charge with a velocity in the presence of a magnetic field is given by F = qvBsinθ

Magnetic force is a fundamental force that arises due to the motion of electric charges. It is the force that acts between two magnetic poles or between a magnetic pole and a moving charged particle. Magnetic force is a vector quantity and is described in terms of its direction, magnitude, and point of application.

The force between two magnetic poles is governed by the inverse square law, which means that the force decreases as the distance between the poles increases. The direction of the magnetic force is perpendicular to the direction of motion of the charged particle and to the direction of the magnetic field in which it moves. The magnitude of the magnetic force is proportional to the charge of the particle, its velocity, and the strength of the magnetic field.

To learn more about Magnetic force visit here:

brainly.com/question/3160109

#SPJ4

After the switch has been closed for a very long time, it is then opened. What is q(topen), the charge on the capacitor at a time topen = 674 μs after the switch was opened? github

Answers

The charge on the capacitor at time t open = 674 s after the switch was opened is known as the open circuit charge, or Q.

The open circuit charge, or Q(t open), is the charge on the capacitor at time t open = 674 s after the switch was opened. Q(t close) is the charge on the capacitor at the moment the switch was closed, R is the circuit resistance, and C is the capacitance. This charge can be calculated using the equation,

Q(t open) = Q(t close)e^(-RC t open)

Q(t open) = Q(t close)e^(-RC674 s),

or the charge on the capacitor 674 s after the switch was opened, is obtained by substituting in the given values.

Learn more about capacitor at:

brainly.com/question/29100869

#SPJ4

Approximately 85% of phosphorus in the body is found in the bones. The other 15% of phosphorus in the body serves mary impertari Durposes. Click to select the functions of phosphorus. Dairy foods are rich sources of calcium, but mary people with lactase intolerance cannot consume these foods without experiending g gestrointestinal discomfort. Fortunately, there are a number of nondairy sources of caiclum. Park the following nondairy foocs in order of calcium content. Most Cakclum Per Sening 1 cup Tohale Rais Bran cereal 1 cup cakcum-fortifed oranon juce 30z salnon with bones From the following food items, click to select the highest source of phosphorus. Click to select the organs that participate in vitamin D synthesis as a result of sunlight exposure.

Answers

Functions of phosphorus: Bone formation, ATP production, DNA and RNA synthesis, cell membrane structure.

Order of nondairy foods by calcium content: 1) 1 cup calcium-fortified orange juice, 2) 1 cup Total Raisin Bran cereal, 3) 3 oz salmon with bones.

Highest source of phosphorus: Salmon with bones.

Organs that participate in vitamin D synthesis: Skin (when exposed to sunlight), liver, and kidneys.

What is bone formation?

Bone formation is the process by which bones grow and develop, including the deposition of mineralized bone tissue by osteoblasts and the resorption of bone tissue by osteoclasts, resulting in changes to the shape and structure of bones.

What is RNA?

RNA (Ribonucleic acid) is a molecule that plays a vital role in various biological processes. It is a type of nucleic acid that is composed of a chain of nucleotides, which are the building blocks of the molecule.

RNA is similar to DNA (deoxyribonucleic acid) in terms of its structure, but it has some key differences. RNA is usually single-stranded, while DNA is double-stranded. RNA uses the sugar ribose, while DNA uses deoxyribose. RNA also contains the nitrogenous base uracil, while DNA contains thymine.

To know more about RNA, visit:

https://brainly.com/question/20914096

#SPJ1

a 38.6 lb weight is supported on several springs whose combined stiffness is 6.4 lb/in. if the system is lifted so that the bottoms of the springs are just free and released, determine the maximum displacement of m, and the time for maximum compression

Answers

The maximum displacement of m  is 199.14, and the time for maximum compression 1.56 seconds.

Given:

Weight, W = 38.6 lb

K(combined stiffness) = 6.4 lb/in

To find:

Maximum displacement of m and the time for maximum compression

Solution: The displacement and velocity of the weight at any time t can be written as below:

x = Acos (ωt + δ)z = Asin(ωt + δ)

Here, A = amplitude

ω = angular frequency = 2π

f = 2π/T

f = frequency = 1/TP = time period

z = vertical displacement of weight from its rest position

x = horizontal displacement of weight from its rest position

For the maximum displacement, the system will be in a state of equilibrium. i.e. ΣF = 0

Let's assume that the weight moves downwards by distance m, the force exerted by each spring will be kx, and the weight exerts a force W = mg on the springs downwards.

Here, m = 38.6 lbs, g = 32.2 ft/s2 and k = K/m = 6.4/38.6 = 0.1657 lb/in

ΣF = -kx - kx - kx - kx - kx - kx + mg = 0-6.4m = -38.6 * 32.2m = 199.14 in (Maximum Displacement of M)The maximum compression will occur when the weight is at the lowest point, i.e. z = -A

Therefore, the time for maximum compression, tmax can be calculated as below.

z = Asin(ωt + δ)At the point of maximum compression, t = tmax

z = -A = -199.14 in (as calculated above)

Therefore,-199.14 = Asin(ωtmax + δ)

Here, A = kx = 6.4×199.14/32.2 = 39.45 inω = 2π/T = 2πf = 2π/4.72 = 1.33 rad/s (where T = time period and f = frequency)

Therefore,-199.14 = 39.45sin(1.33tmax + δ)sin(1.33tmax + δ) = -5.05tmax = 1.56 s

Thus, the maximum displacement of m is 199.14 inches and the time for maximum compression is 1.56 seconds.

To know more about Displacement please visit :

https://brainly.com/question/14422259

#SPJ11

while completing the experiment, where should you measure to on the pendulum bob?

Answers

While completing the pedulum experiment, you should measure the length of the pendulum to the middle of the pendulum bob to caculate the required values.

What part of a pendulum do you measure?

A ruler, meter stick, or measuring tape are necessary in order to determine the length of a pendulum. Start the measurement at the point where the string pivots from its attachment at the string's upper end. As you reach the item dangling from the string, the pendulum bob, measure all the way down to its center.

The smallest time intervals are measured using a pendulum clock. A little stone or metallic ball suspended from a stiff stand by a thread is the basic component of a pendulum. Bob is the name of the metallic ball.

Learn more about pedulum at:

https://brainly.com/question/30823177

#SPJ1

Suppose two rings are at the top of a ramp. The rings have the same mass, but one ring has a much larger radius than the other. Which ring will win the race to the bottom, and why? (Hint: Consider the potential energy, translational kinetic energy, and rotational kinetic energy of each ring.)

Answers

Suppose two rings are at the top of a ramp. The rings have the same mass, but one ring has a much larger radius than the other. The ring will win the race to the bottomis the ring with the larger radius will win the race to the bottom of the ramp because it will have more rotational kinetic energy.

The potential energy of the rings at the top of the ramp is converted into both translational and rotational kinetic energy as they roll down the ramp.At the top of the ramp, both rings have the same potential energy. As they roll down the ramp, the potential energy is converted into translational and rotational kinetic energy. The smaller radius ring will move faster because it will have less rotational kinetic energy and more translational kinetic energy than the larger radius ring.

Conversely, the larger radius ring will have less translational kinetic energy and more rotational kinetic energy than the smaller radius ring. Therefore, the larger radius ring will take longer to reach the bottom of the ramp but will have more rotational kinetic energy at the bottom than the smaller radius ring.

Learn more about kinetic energy at:

https://brainly.com/question/22174271

#SPJ11

find the current in an 8.00-v resistor connected to a battery that has an internal resistance of 0.15 v if the voltage across the battery (the terminal voltage) is 9.00 v. (b) what is the emf of the battery?

Answers

(a) The flowing current is 1.08 A. (b) The EMF of the battery is 9.16 V.

It is given data that the resistance of the resistor (R) = 8.00 V and the voltage across the battery (V) = 9.00 V. The internal resistance of the battery (r) = 0.15 V

Formula used:

V = EMF - I * rV = IR

Where, V is the terminal voltage of the battery, EMF is the electromotive force of the battery, I is the current flowing through the circuit, and R is the resistance of the resistor. r is the internal resistance of the battery

(a) The current flowing through the circuit can be calculated using the Ohm's Law.

V = IR

I = V / R

I = 9 / (8 + 0.15)

I = 1.08 A

The current flowing through the circuit is 1.08 A.

(b) Find the emf of the battery:

We know that,

V = EMF - I * r

EMF = V + I * r

EMF = 9 + 1.08 * 0.15

EMF = 9.16 V

The emf of the battery is 9.16 V.

Learn more about Current:

https://brainly.com/question/24858512

#SPJ11

what did oersted discover about electricity and magnetism

Answers

Hans Christian Oersted established the connection between electricity and magnetism in 1820. The magnetic field produced by the current revolves around the wire in a circle.

Oersted demonstrated how a magnetic field may be produced by moving electrons by establishing a compass through a wire carrying an electric current.

Scientists believed that electricity and magnetism had no connection until the discovery of electromagnetism. Hans Christian Oersted, a scientist from Denmark, revolutionised all of that. He found that an electric current in a wire may cause a magnetic field, as evidenced by the fact that the current can cause a magnetised compass needle to deflect.

The electrons in the wire are pushed when a coil of wire is moved around a magnet or vice versa, producing an electrical current. In essence, kinetic energy—the energy of motion—is transformed into electrical energy via electricity generators.

Learn more about Electricity here:

https://brainly.com/question/12791045

#SPJ4

a bar magnet falls under the influence of gravity along the axis of a long copper tube. if air resistance is negligible, will there be a force to oppose the descent of the magnet? if so, will the magnet reach a terminal velocity? explain.

Answers

A bar magnet falls under the influence of gravity along the axis of a long copper tube. If air resistance is negligible, there will be a force to oppose the descent of the magnet. The magnet will reach a terminal velocity. Here's why:

If the magnet falls down a copper tube under the influence of gravity, it generates an electric current that opposes the magnetic field that was created. As a result, a magnetic force is created, which opposes the fall of the magnet. As a result, there is a force opposing the descent of the magnet.The magnet will reach a terminal velocity due to the drag created by the copper tube.

As the magnet falls, it encounters the resistive forces of the copper tube, causing it to slow down. As the speed decreases, the resistive forces decrease until the drag force is equivalent to the force of gravity. The magnet then reaches a steady state called the terminal velocity. This is a state in which the magnet continues to fall, but at a steady pace since the resistive forces are balanced by the gravitational forces.

Learn more about magnetic force: https://brainly.com/question/29252577

#SPJ11

Can someone please help me with this I am quite stuck thanks

Answers

Answer:

The mass remains the same since stoichiometrically one mole reacts and one mole is formed

Explanation:

Calcium chloride is reacting with Sodium sulphate to form a white precipitate of calcium sulphate.

[tex]{ \sf{CaCl _{2} + Na_{2} SO_{4} → CaSO _{4} + 2NaCl}}[/tex]

From the equation, 1 mole of calcium chloride forms 1 mole of calcium sulphate.

R.F.M of CaCl2 = 40 + (35.5×2) = 111

R.F.M of CaSO4 = 40 + 32 + (16×4) = 136

R.F.M of Na2SO4 = (23×2) + 32 + (16×4) = 142

R.F.M of 2NaCl = 2[23 + 35.5] = 117

[tex]{ \sf{(r.f.m \: of \: rectants) = (r.f.m \: of \: products)}} \\{ \sf{ (mass \: of \: rectants) = (mass \: of \: products)}} \\ \\ { \sf{(111 + 142) = (136 + 117)}} \\ { \sf{300.23 = x}} \\ \\ { \sf{x = \frac{300.32}{(111 + 142)} \times (136 + 117) }} \\ \\ { \sf{x = \frac{300.32}{253} \times 253 }} \\ \\ { \sf{x = 300.32}}[/tex]

Answer:

The mass remains the same

Explanation:

how would we get mercury to be reclassified as a minor body?

Answers

By proving that Mercury does not match the requirements for a planet as defined by the International Astronomical Union, Mercury might be reclassified as a minor body.

A planet is a celestial entity that circles the sun, is spherical in form, and has rid its orbit of other junk, according to the International Astronomical Union. Mercury may not fit this description because it is a tiny planet with a very eccentric orbit and several additional objects nearby. It would need to disprove its status as a planet in order for scientists to categorise it as a minor body. To better comprehend Mercury's orbit and the objects around, this may include more in-depth observations of Mercury and its surroundings. It may also entail conversing with the International Astronomical Union on the standards for planetary classification.

learn more about Mercury here:

https://brainly.com/question/30914360

#SPJ4

if an object has a mass of 200 kg and a weight of 1000 n, what is g? a. 0.2 n/kg b. 20 n/kg c. 10 n/kg d. 5 n/kg

Answers

The value of g, the acceleration due to gravity, is approximately 5 m/s2 or 10 n/kg.

To calculate g, we use the formula:

g = F/m

where g is the acceleration due to gravity, F is the force of gravity or weight, and m is the mass of the object.

Given that the mass of the object is 200 kg and the weight is 1000 N, we can plug in the values and solve for g:

g = 1000 N / 200 kg = 5 m/s2

Therefore, the value of g is approximately 5 m/s2 or 10 n/kg.

For more similar questions on acceleration:

brainly.com/question/25876659

#SPJ11

because the direction of earth's motion around the sun continually changes during the year, the apparent position of a star in the sky moves in a small loop, known as the aberration of starlight. in order to better understand this phenomenon, it is sometimes helpful to use visual analogies. in these visual analogies, the car is analogous to the earth, and the rainfall is analogous to starlight. determine which visual analogies correspond to the following scenarios: a) the earth moving around the sun and interacting with light from a distant star b) a person on the moving earth observing the light from a distant star c) a person on a motionless earth observing the light from a distant star items (4 images) (drag and drop into the appropriate area below)

Answers

The appropriate visual analogies that correspond to the given scenarios are as follows:

A) The car traveling in a circle and the rain falling from the sky - this analogy corresponds to the Earth moving around the Sun and interacting with light from a distant star.

B) The car traveling in a straight line and the rain falling from the sky - this analogy corresponds to a person on the moving Earth observing the light from a distant star.

C) The car is stationary and the rain falls from the sky - this analogy corresponds to a person on a motionless Earth observing the light from a distant star.

What is a star?


As we know that the direction of the earth's motion around the sun continually changes during the year, and the apparent position of a star in the sky moves in a small loop, known as the aberration of starlight. Hence, the visual analogies that correspond to the given scenarios are as follows:'=

a) The Earth moving around the Sun and interacting with light from a distant star is analogous to the first picture, where the car is moving and it is raining. This visual analogy explains that when the Earth moves around the Sun and interacts with light from a distant star, it results in a small loop of light in the sky.

b) A person on the moving Earth observing the light from a distant star is analogous to the second picture, where a person is sitting inside the moving car and looking at the rain. This visual analogy explains that when a person is on the moving Earth and observes the light from a distant star, it creates an illusion in the sky.

c) A person on a motionless Earth observing the light from a distant star is analogous to the third picture, where a person is standing outside the car and looking at the rain. This visual analogy explains that when a person is on a motionless Earth and observes the light from a distant star, it appears as if the star is moving in a small loop in the sky.

Therefore, the appropriate visual analogies that correspond to the given scenarios are as follows: Image 1: The Earth moving around the Sun and interacting with light from a distant star image 2: A person on the moving Earth observing the light from a distant star image 3: A person on a motionless Earth observing the light from a distant star.

To learn more about stars follow

https://brainly.com/question/15854882

#SPJ11

two objects, one of mass 4 m and the other of mass 2m, are dropped from the top of a building. assuming friction is negligible, when the two objects hit the ground
a. Both of them will have the same kineic energy
b. The heavier one will have twice the kineic energy of the lighter one
c. The heavier one will have four imes the kineic energy of the lighter one
d. The heavier one will have √2 imes the kineic energy of the lighter one

Answers

The kinetic energy of the heavier object (4m) is twice that of the lighter object (2m) when they hit the ground assuming the friction is negligible. Option B is correct.

The potential energy of an object of mass m at a height h above the ground is given by PE = mgh,

where g is the acceleration due to gravity.

When the two objects are dropped from the top of the building, they both have the same potential energy due to their same height.

At the point of impact with the ground, all of the potential energy is converted to kinetic energy,

which is given by KE = 1/2*mv²,

where v is the velocity of the object just before hitting the ground.

Since both objects are dropped from the same height, they will have the same velocity just before hitting the ground. Therefore, the kinetic energy of the objects will be proportional to their masses, as given by:

KE_{4m} = 1/2 (4m) v² = 2mv²

KE_{2m} = 1/2 (2m) v² = mv²

Comparing both of them we know the kinetic energy of the heavier object (4m) is twice that of the lighter object (2m) when they hit the ground.

Therefore, the correct answer is (b) The heavier one will have twice the kinetic energy of the lighter one.

To know more about kinetic energy:

https://brainly.com/question/8101588

#SPJ11

Other Questions
Write a JAVA program that reads from the keyboard a small password and then offers two options:1. enter your name and a filename to save or2. enter a file name to load.With the option 1 proceed to save to the file an encrypted version of your name (details below), with the option 2 proceed to load the information from the file and decrypt the name and print it to the screen. The options 1 and 2 are in reverse (1 saves the encrypted information to the file, 2 decrypts the information from the file). Details of the encryption: Say your name is Andrei and you chose the password 1234, then you do XOR between the ASCII code for A (first letter in your name) and the ASCII code for 1(first letter in your password), I will denote this operation (A,1) then you do XOR between n and 2 (n,2) (second letter in your name with second letter in password) and so on, thus we will have the following operations to perform: (A,1) (n,2) (d,3) (r,4) (e,1) (i,2). Obviously, if you would choose the password qwer then the XOR operations will be between the following pairs: (A,q)(n,w)(d,e)(r,r)(e,q)(i,w). The trick is that the encrypted text can be decrypted due to the following property of XOR: A XOR B=C; C XOR B=A, thus if I have the results of the XOR operations in the file (and this is your name encrypted) then it is sufficient to do XOR with the same password (with the same ASCII codes) and I will get back the original string. For example, with the first password, (A XOR 1) XOR 1 =A, (n XOR 2) XOR 2=n and so on: ((A,1),1) ((n,2),2) ((d,3),3) ((r,4),4) ((e,1),1) ((i,2),2)= A n d r e i. Solve for x in the triangle. Researchers studying the evolutionary relationships of three species of snails collected the data shown in Table 1.Which of the following data sets is most likely to provide reliable information about the evolutionary relationships among these three snail species?Location of fossils and shell orientation In the context of small businesses, _____ comes from lenders who will be repaid at a specified interest rate within a specified time span.A. equity financingB. debt financingC. profit capitalD. working capital fill in the blank. ___ is a small data warehouse designed for a strategic business unit or in a department that does not rely on the data warehouse for its content. Triangle ABC is a scale drawing of Triangle XYZ, as shown.Based on the information shown in these triangles, which of the following is a true statement?A) The length of side XZ is 11.5.B) The length of side XZ is 28.C) The measure of angle A is equal to the measure of angle Z.D) The measure of angle A is not equal to any of the angle measures of Triangle XYZ. what mass of silver bromide is formed when 35.5 ml of 0.184 m silver nitrate is treated with an excess of hydrobromic acid? Mr. Kiwat borrowed GH200,000 from his bankers to buy his dream house. Repayment is over 4 years and first payment is due one year from hence. He will make equal payments to amortize both the principal and interest, which is calculated on a reducing balance basis. The bank will charge 5% above its current base rate of 20% per annum. Required:i. Calculate Mr Bruces annual payments ii. Show a table on how the annual payment will liquidate the loan and interest. A company reported the following:$275,270Preferred dividends$20,390Shares of common stock outstanding36,000Market price per share of common stock$118.87Calculate the company's price-earnings ratio. Round your answer to two decimal places.Net income determine the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) o2 (g) --> co2 (g) the change in enthalpy for this reaction is -349 kj/mol. what quantities are conserved for a comet orbiting the sun?view available hint(s)for part chint 1for part c. what quantities are usually conservedwhat quantities are conserved for a comet orbiting the sun?speedtotal mechanical energykinetic energyangular momentum with respect to the center of the ellipseaccelerationgravitational potential energyangular speedlinear momentumangular momentum with respect to the sun Write the reciprical of 2/3 What is the best way to correct the capitalization errors in sentence 22?OA. Star-nosed moles live in canada and the northern United States.B.Star-Nosed Moles live in Canada and the Northern United States.OC.Star-Nosed Moles live in canada and the Northern United States.OD. Star-nosed moles live in Canada and the northern United States. The population of Toledo, Ohio, in 2000 was approximately 500,000. Assume the population is increasing at a rate of 5% per year. a. Write the exponential function that relates the total population as a function of t. b. Use a. to determine the rate at which the population is increasing in t years. c. Use b. to determine the rate at which the population is increasing in 10 years. The exponential probability distribution is used with: A. A discrete random variable B. A continuous random variable C. Any probability distribution with an exponential term D. An approximation of the binomial probability distribution true/false. collaborating with a social scientist to provide insights into human bias and social contexts is an effective way to avoid bias in your data. Which change is MOST likely to occur because of the movement of the axis? Problem 1: In Fig. 1, find an expression for the acceleration ofm 1. The pulleys are massless and frictionless. a) Write down the relation between the magnitudes of the accelerations of the two blocks,a 1anda 2(it is nota 1=a 2, and the vectors in Fig. 1 are not drawn to scale). An argument that could help is that the total length of the rope stays constant during the motion. b) Write down Newton's second law for each block. Do not miss FIG. 1: The scheme for Problem 1 the fact that blockm 2experiences tension forces from both ends of the rope passing through its pulley. Using the acceleration constraint from part a), work out the formula for the accelerationa 1in terms ofm 1,m 2, andg. c) What is the value ofa 1, ifm 1=3 kg, andm 2=1 kg? (Answer:a 1=1.5 m/s 2.) The titration of 45.0 ml of an unknown triprotic acid required 32.71 ml of 0.37 M KOH toreach the endpoint. What is the molarity of the unknown acid? When Beth returns from holiday she changes 120 back into pounds. The exchange rate is now 1 = 1.16 (b) Work out how many pounds () Beth receives.