a flat, circular loop has 17 turns. the radius of the loop is 12.5 cm and the current through the wire is 0.60 a. determine the magnitude of the magnetic field at the center of the loop (in t).

The power dissipation in the ion channel is 4.9 mW given that the potential difference across the ion channel is 70 mv

The power dissipated by a resistor is given by the formula:P = V² / RwhereP = PowerV = VoltageR = Resistance

The power dissipated in the ion channel is unknown. However, we can consider the ion channel to have a resistance of 1 Ω. This is because the resistance of an ion channel is very small and close to zero. So, we can assume the resistance of the ion channel as 1 Ω.As we know the potential difference across the ion channel, we can use the above formula to find the power dissipated in the ion channel.P = (70 mV)² / 1 ΩP = 0.0049 W = 4.9 mW

Therefore, the power dissipation in the ion channel is 4.9 mW.

More on power: https://brainly.com/question/29347465

#SPJ11

The tension in the right-hand side wire is 6525 N.

Given:

To find: Tension in the right-hand side wireWe know that the sum of forces acting in a vertical direction should be equal to 0 as there is no acceleration in the vertical direction. ∑Fv = 0In the horizontal direction, there are no forces acting on the system.

∑Fh = 0Now considering forces in the vertical direction: T1 + T2 = (Weight of scaffold + Weight of the box) gT1 + T2 = (180 + 580) x 9.8T1 + T2 = 7644 N1. From the diagram, we can see that the box is nearer to the left side. Hence, the tension force in the left wire is greater than the tension force in the right wire.

T1 > T22. Let's take moments about the right end of the scaffold as shown in the figure below.

Now, we can substitute the value of T2 in equation (1):

To find T2, we can substitute the value of T1 in equation (2):

Therefore, the tension in the right-hand side wire is 6525 N.

Learn more tension: https://brainly.com/question/4001686

#SPJ11

As a positively charged glass rod is brought near the knob of the electroscope, the separation of the leaves will increase.

What is Charge?

Charge is a fundamental property of matter that determines how objects interact with each other through the electromagnetic force. It is a physical property that can be positive or negative and can be measured in coulombs (C).

This is because the positively charged glass rod will induce a negative charge on the metal knob of the electroscope. The negative charges will repel the electrons in the metal leaves, causing them to move away from each other and increasing their separation. The greater the amount of charge on the glass rod, the greater the separation between the leaves will be.

Learn more about Charge from given link

https://brainly.com/question/18102056

#SPJ1

The point on the x-axis between the two charges where the electric field is zero is 0.747 m, when the charges -2.1 μC and -5.6 μC are located at (-0.50 m , 0) and (0.50 m , 0), respectively.

An electric field is defined as the electric force per unit charge. It is a field of force surrounding electrically charged particles, such as electrons or protons in motion, that exerts force on surrounding matter. It is represented by the symbol E.

The electric field E at any point (x,y) on the x-axis due to the charge Q1 at (-0.50 m, 0) is

[tex]E1 = k * Q1 / r1^2[/tex]

where, k = Coulomb's constant = [tex]9 x 10^9 Nm^2/C^2[/tex]

Q1 = charge = -2.1 μC

r1 = distance between Q1 and

(x,y) = (0.50 + x) m

The electric field E at any point (x,y) on the x-axis due to the charge Q2 at (0.50 m, 0) is

[tex]E2 = k * Q2 / r2^2[/tex]

where,

Q2 = charge = -5.6 μC

r2 = distance between Q2 and (x,y) = (0.50 - x) m

The total electric field E at any point (x,y) on the x-axis due to both the charges is

[tex]E = E1 + E2 = k * Q1 / r1^2 + k * Q2 / r2^2[/tex]

[tex]E = k * (-2.1 * 10^-6) / (0.5 + x)^2 + k * (-5.6 * 10^-6) / (0.5 - x)^2[/tex]

At the point on the x-axis between the two charges where the electric field is zero,

[tex]E = 0k * (-2.1 * 10^-6) / (0.5 + x)^2 + k * (-5.6 * 10^-6) / (0.5 - x)^2 = 0[/tex]

Simplifying, we get [tex](0.5 + x)^2 / (0.5 - x)^2 = 2.667x^2 + 2.667x - 0.50 = 0[/tex]

Solving for x, we get

x = -1.74 m or

x = 0.747 m

We cannot have a negative value of x as the point has to be between the two charges. So, the location of the point where the electric field is zero is x = 0.747 m.

Learn more about electric field: https://brainly.com/question/14372859

#SPJ11

If the object in motion has some magnetic properties or contains a magnet, we can use another magnet to change its direction of motion by exerting a force on it through magnetic interaction. This principle is known as the Lorentz force.

Here's how we can set up the experiment:

Take a magnet and place it on a flat surface.

Take another magnet or the object with magnetic properties that is in motion.

Hold the magnet or the object in your hand and bring it close to the stationary magnet without touching it.

Move the magnet or the object towards the stationary magnet and observe its behavior.

If the magnet or the object has the same polarity as the stationary magnet, they will repel each other, and the motion of the object will be deflected in a direction away from the stationary magnet. If the magnet or the object has opposite polarity to the stationary magnet, they will attract each other, and the motion of the object will be deflected in a direction towards the stationary magnet.

Here's a diagram to help you visualize the setup:

                 N   S          N   S

       __________    __________

      |                       |  |                     |

      |   M1               |  |           M2     |

      |__________|  |__________|

              ( )                             ( )

               |                               |

        Motion              Stationary

        Object                 Magnet

In this diagram, M1 represents the motion object or magnet, and M2 represents the stationary magnet. The N and S represent the North and South poles of the magnets. The arrows indicate the direction of motion and the direction of the magnetic field.

As we move M1 towards M2, the magnetic interaction will exert a force on M1, causing it to change its direction of motion. The direction of deflection will depend on the polarity of the magnets.

Note: It's important to keep in mind that the magnetic force is only one of the many factors that can affect the motion of an object. Other factors such as friction, air resistance, and gravitational forces can also play a significant role.

To know more about  Motion visit :-

https://brainly.com/question/453639

#SPJ1

The speed of the sports car at impact when kinetic friction between tires and road is 0.80 is 15.55 m/s.

It is given that Mass of sports car, ms = 910 kg, Mass of SUV, mSUV = 2100 kg, and Initial velocity of sports car, us = ?, Final velocity of sports car, v = 0, Initial velocity of SUV, uSUV = 0, Final velocity of SUV, vSUV = 0, and Coefficient of kinetic friction, μk = 0.80. Distance covered before stopping, s = 2.5 m.

We know that the total momentum of the system remains conserved, we can write:

ms * us + mSUV * uSUV = (ms + mSUV) * v

Thus,

ms * us = (ms + mSUV) * v

The speed of the sports car at impact when kinetic friction between tires and road is 0.80 is 15.55 m/s.

It is given that Mass of sports car, ms = 910 kg, Mass of SUV, mSUV = 2100 kg, and Initial velocity of sports car, us = ?, Final velocity of sports car, v = 0, Initial velocity of SUV, uSUV = 0, Final velocity of SUV, vSUV = 0, and Coefficient of kinetic friction, μk = 0.80. Distance covered before stopping, s = 2.5 m.

We know that the total momentum of the system remains conserved, we can write:

ms * us + mSUV * uSUV = (ms + mSUV) * v

Thus,

ms * us = (ms + mSUV) * v

Since the two cars skid together, the frictional force provides the reduction to the motion of the cars. The reduction force F = μk * N where N is the normal force acting on the cars, N = (ms + mSUV) * g where g is the acceleration due to gravity, g = 9.8 m/s².

We have to find the speed of the sports car at impact i.e. us. So, using the equations of motion with constant acceleration, we can write:

us² - 2 * μk * (ms + mSUV) * g * s / (ms + mSUV) = v²

us² = 2 * μk * (ms + mSUV) * g * s / ms

us = sqrt [2 * 0.80 * (910 + 2100) * 9.8 * 2.5 / 910]

us = 15.55 m/s

Therefore, the speed of the sports car at impact is 15.55 m/s.

Learn more about Kinetic friction:

https://brainly.com/question/20241845

#SPJ11

Star A's light will take longer to reach us.

The volume of the gas varies inversely with pressure, and the correct answer is (b) P/3.

According to Boyle's Law, at a constant temperature, the volume of a gas is inversely proportional to its pressure. Mathematically, this can be expressed as:

PV = k

where P is the pressure of the gas, V is its volume, and k is a constant.

If we assume that the mass of the gas remains constant, then k is also constant. So we can write:

[tex]P_1V_1 = k and P_2V_2 = k[/tex]

where[tex]P_1 and V_1[/tex] are the initial pressure and volume, and [tex]P_2 and V_2[/tex] are the final pressure and volume.

If we divide these two equations, we get:

[tex]P_1V_1/P_2V_2 = 1[/tex]

Since[tex]V_1[/tex] is inversely proportional to [tex]P_1[/tex], we can write:

[tex]V_1 = k/P_1[/tex]

Similarly, [tex]V_2 = k/P_2.[/tex]

Substituting these values in the above equation, we get:

[tex](k/P_1)/(k/P_2) = 1[/tex]

Simplifying this, we get:

[tex]P_2/P_1 = V_1/V_2[/tex]

Since we are given that the temperature remains constant, we can assume that k is constant, and therefore:

[tex]V_1/P_1 = V_2/P_2[/tex]

If we let [tex]P_2 = 3P_1[/tex], then we get:

[tex]V_1/P_1 = V_2/(3P_1)[/tex]

Simplifying this, we get:

[tex]V_1/V_2 = 1/3[/tex]

for such more question on volume

https://brainly.com/question/14197390

#SPJ11

A P-N-P transistor is turned on when the base is negative with respect to the emitter.

The operation of a P-N-P transistor is based on the principle of a semiconductor diode. When a small current is applied to the base, it causes a larger current to flow through the emitter and collector. This is because the base-emitter junction is forward-biased, allowing electrons to flow from the emitter to the base. At the same time, the collector-base junction is reverse-biased, allowing holes to flow from the base to the collector.

This flow of electrons and holes produces a current gain. The amount of current gain depends on the type of transistor and the amount of current applied to the base.

Learn more about transistors here:

https://brainly.com/question/1426190

#SPJ1

Explanation:

Planets closer to the sun will appear to transit from time to time

   = 2      Venus and Mercury     ( I suppose you could include the Moon..an eclipse ....haha)

All of the planets further from the sun than earth will not transit

Potentially ALL of the planets could transit the sun (earth included)  if observed outside solar system   HOWEVER if you are not observing from near the orbital plane of

the planets NONE of them would transit

For maximum transits, the planets should all be in the same orbital plane and the observer should be very close to this plane also.

The total work done on a particle is given by the formula:

W = (1/2)mvf^2 - (1/2)mvi^2

where m is the mass of the particle, vi is the initial velocity, and vf is the final velocity.

For vi = 5 m/s and vf = 2 m/s, the final velocity is less than the initial velocity, so the total work is positive.

For vi = -2 m/s and vf = -5 m/s, the final velocity is less than the initial velocity, so the total work is positive.

For vi = -5 m/s and vf = 2 m/s, the final velocity is greater than the initial velocity, so the total work is negative.

For vi = 5 m/s and vf = -2 m/s, the final velocity is greater than the initial velocity, so the total work is negative.

For vi = -5 m/s and vf = -2 m/s, the final velocity is less than the initial velocity, so the total work is positive.

Therefore, the total work done on the particle is positive for vi = 5 m/s and vf = 2 m/s, and for vi = -2 m/s and vf = -5 m/s.

In order for work to be done, there must be a displacement of the object in the direction of the force applied. If the force and displacement are perpendicular, then no work is done.

Work can be positive, negative, or zero, depending on the direction of the force and the displacement. Positive work is done when the force and the displacement are in the same direction, negative work is done when they are in opposite directions, and zero work is done when there is no displacement or when the force and displacement are perpendicular.

Work is a transfer of energy, and as such it can change the kinetic energy, potential energy, or both of an object.

To know more about Work visit :

https://brainly.com/question/18094932

#SPJ1

The point at which the warning will do no good is 7.50 m above the man's ears.

When a water-filled balloon is released from rest at a height of 10.0 m above the ears of a man, the warning will do no good if shouted after the balloon reaches a certain point. Assuming that the air temperature is 20°C and ignoring the effect of air resistance, this point is 7.50 m above the man's ears.

The vertical displacement (d) can be determined using the equation [tex]d = \frac{vf2}{2g}[/tex], where vf is the final velocity and g is the acceleration due to gravity (9.81 m/s2).

Since the balloon was released from rest, the initial velocity is 0 m/s. Therefore, [tex]d = \frac{02 }{ 2} (\frac{9.81 m}{s2} ) = 0[/tex]m. Since the initial height was 10.0 m, the final height is 10.0 m + 0 m = 10.0 m.

The point at which the warning will do no good is 7.50 m above the man's ears, so the final height of the balloon must be 10.0 m - 7.50 m = 2.50 m.

Therefore, the point at which the warning will do no good is 7.50 m above the man's ears.

Learn more about vertical displacement: brainly.com/question/2289543

#SPJ11

The acceleration of the cart at this instant is calculated to be 5.17 m/s² to the right.

Newton's second law explains that acceleration of any object is directly related to net force and inversely related to the mass.

To determine the acceleration of the cart, we need to calculate the net force acting on it.

The net force is the vector sum of the two forces:

Net force = Force a + Force b = 77 N to the right - 15 N to the left = 62 N to the right

Using Newton's second law, F = ma, where F is the net force and m is the mass of the cart, we can calculate the acceleration:

a = F/m = 62 N / 12 kg = 5.17 m/s

Therefore, the acceleration of the cart at this instant is 5.17 m/s² to the right.

To know more about Newtons' law, refer

https://brainly.com/question/28171613

#SPJ1

If the whole picture plane is affected by aerial diffusion, it stops being an effective indicator of depth - this statement is true.

Aerial diffusion is the scattering of light by particles in the air. These particles cause distant objects to appear fainter and bluer than closer objects, leading to a decrease in visual clarity and the ability to perceive depth. Aerial diffusion can be utilized in painting and drawing to create an atmospheric perspective, which produces a sense of depth by making objects are that further away appear hazier and less distinct than those that are closer. However, if the entire picture plane is affected by aerial diffusion, this can make it difficult to distinguish between objects at different depths, which can result in a lack of clarity and depth perception in the painting or drawing.

A picture plane is a theoretical plane that corresponds to the surface of a painting or drawing. The picture plane is where the artist organizes and arranges the various elements of the composition to create a visual representation of a scene. The picture plane is where the viewer's eye interacts with the artwork, and where the illusion of depth and space is created. In this context, the picture plane is an important factor in the creation of depth and atmosphere in a painting or drawing.

Learn more about aerial diffusion:

https://brainly.com/question/1381101

#SPJ11

Water droplets that act as prism are phenomenon known as : b) rainbow.

When light enters water droplet and is refracted, it is dispersed into its component colors due to difference in the index of refraction of each color of light. This results in band of colors in the shape of arc with red on outer edge and violet on inner edge, with other colors of spectrum in between. This is the same effect as prism which disperses light in the same way.

Rainbows appear in seven colors because water droplets break sunlight into seven colors of spectrum and you get the same result when sunlight passes through prism. Water droplets in the atmosphere act as prism though traces of light are very complex.

To know more about rainbow, refer

https://brainly.com/question/1550509

#SPJ1

The proton accelerates from rest in a uniform electric field of 600 n/c. In order to find the time interval it takes for the proton to reach a speed of 1.50 mm/s.

We need to use the equation v = v₀ + at, where v is the final velocity, v₀ is the initial velocity (which is 0 in this case), a is the acceleration, and t is the time interval. The acceleration of the proton in the electric field is a = E/m, where E is the electric field and m is the mass of the proton. Substituting these values into the equation gives us:

1.50 mm/s = 0 + (600 n/c/1.67 x 10⁻²⁷ kg) x t

Rearranging the equation and solving for t gives us the time interval:
t = 1.50 mm/s/(600 n/c/1.67 x 10⁻²⁷ kg)

t = 8.33 x 10⁻¹³ s

t = 8.33 ms

Therefore, it takes the proton 8.33 ms to accelerate from rest to a speed of 1.50 mm/s in the uniform electric field of 600 n/c.

Learn more about proton accelerates at https://brainly.com/question/21595065

#SPJ11

. Additionally, Star 1 has prominent hydrogen lines, indicating a lower temperature than Star 2. Therefore, the statements can be sorted into the true and false bins as indicated above.

True: Star 1 has a longer lifetime than Star 2; Star 2 is bluer than Star 1; Star 2 has a lower mass than Star 1; Star 1 has prominent hydrogen lines.

False: Star 2 has a higher luminosity than Star 1; Star 2 is cooler than Star 1.

The spectra of the two main sequence stars illustrate some differences between the two stars. Star 1 is on the left and has a longer lifetime than Star 2, which is on the right. This is evident from the intensity axes that are not on the same scale. Star 2 has a lower mass than Star 1, is bluer than Star 1, and has a lower luminosity

for such more questions on hydrogen lines

https://brainly.com/question/30461609

#SPJ11

A 1 kg box falls two metres from a shelf and lands on the ground after 0.021 seconds. The box impacted the ground with a force of around 524.7 N.

The box impacted the ground with a force of around 524.7 N.

Explanation: We can determine the force using the equation F = m * (v/t), where m is the box's mass, v is the velocity change (which is the ultimate velocity because the box starts at rest and comes to a halt), and t is the time it takes for the box to stop.

Given that the box falls 2 metres and its terminal velocity is 0 m/s, v = 2 m/s.

524.7 N is equal to F = 1.1 kg * (2 m/s / 0.021 s).

learn more about force here:

https://brainly.com/question/13191643

#SPJ4

"The required angle Ф between the filter's polarizing axis and the direction of polarization of light necessary to increase the ratio of the clouds' intensity to that of the blue sky so that it is three times the normal value is 65.9°."

A photographer wants to click a picture of a cloud formation, the ratio of clouds intensity to that of the blue sky photographer uses polarizing filter from Malus law,

I = I₀ cos²Ф

So, I f = I i cos²Ф

As the light from cloud is polarized, its intensity reduces to half.

I c = I₀/2

The intensity of light from sky is polarized light.

I s = I₀ cos²Ф

Hence, the ratio of intensities is,

I c/I s = (I₀/2)/(I₀ cos²Ф)

3 = (I₀/2)/(I₀ cos²Ф)

cos²Ф = 1/6

Thus, the required angle is Ф = cos⁻¹(1/√6) = 65.9°

To know more about angles:

https://brainly.com/question/28562350

#SPJ4

The speed of sound is found out to be 349.4 ms⁻¹ from the frequency of the seventh resonance heard when the water level is 217.75 cm below the top of the tube.

Frequency of wave:

v = nλ

where, v = speed of sound, n = frequency, λ = wavelength

Speed of sound:

v = frequency n × wavelength λ

Frequency, n = v/λ

Wavelength, λ = v/n

The 7th resonance frequency of the tuning fork is given by:

n = 7 × f

where, f is the frequency of the tuning fork

Speed of sound, v = nλ

Speed of sound, v = 7fλ

Speed of sound, v = 7 × 256 Hz × λ

λ = 1.3671 m

Distance travelled by the sound wave in the water column is L = h + l

where, h = length of the air column and l = length of water column where the resonance was heard.

L = h + l

L = 217.75 cm + 50 cm

L = 267.75 cm = 2.6775 m

Length of the air column, h = L - l

where, l = length of water column where the resonance was heard.

h = 2.6775 m - 0.5 m

h = 2.1775 m

Wavelength of sound wave in air column, λ₁ = 4h

λ₁ = 4 × 2.1775 m

λ₁ = 8.71 m

Frequency of the sound wave in air column is given by:

n = v/λ₁

n = 349.4 ms⁻¹ / 8.71 m

n = 40.112 Hz

The 7th resonance frequency of the tuning fork is given by:

n = 7 × f

40.112 Hz = 7 × f

Frequency of the tuning fork, f = 5.73 Hz.

Learn more about Frequency here:

https://brainly.com/question/14316711

#SPJ11

Answer:

✓ 1. radio 2. infrared 3. orange 4. green 5. ultraviolet

Explanation:

The Kuiper belt is a disk-like region between the outer planets and the Oort cloud. Thus, option A is correct

The Kuiper belt, also known as the trans-Neptunian region, is a doughnut-shaped region of space beyond Neptune that is home to an estimated 100,000 tiny, icy objects.

It is named after Dutch-American astronomer Gerard Kuiper, who first proposed its existence in 1951.

The belt ranges in distance from 30 to 50 astronomical units (AU) from the Sun, which is about 2.8 to 4.7 billion miles away.

The Kuiper belt objects are believed to be remnants from the formation of the solar system. They are small and mostly made up of ice and dust, similar to comets.

Some Kuiper belt objects, such as Pluto and Eris, are classified as dwarf planets.

Learn more about the Kuiper belt here:

https://brainly.com/question/3955749

#SPJ11

The energy needed to heat the water and the copper tank to 55°C is 25,083,080 J.

Q = mCΔT

m = 150 kg (mass of water)

C = 4.18 J/g°C (specific heat capacity of water)

ΔT = 55°C - 15°C = 40°C (change in temperature)

Using the formula, we get:

[tex]Q_{water}[/tex] = mCΔT

[tex]Q_{water}[/tex] = (150 kg) x (4.18 J/g°C) x (40°C)

[tex]Q_{water}[/tex] = 25,080,000 J

m = 20 kg (mass of tank)

C = 0.385 J/g°C (specific heat capacity of copper)

ΔT = 55°C - 15°C = 40°C (change in temperature)

Using the formula, we get:

[tex]Q_{tank}[/tex] = mCΔT

[tex]Q_{tank}[/tex] = (20 kg) x (0.385 J/g°C) x (40°C)

[tex]Q_{tank}[/tex]= 3080 J

Finally, we can add the two energies together to get the total energy needed:

[tex]Q_{total}[/tex] = [tex]Q_{water}[/tex] [tex]+[/tex] [tex]Q_{tank}[/tex]

[tex]Q_{total}[/tex] [tex]= 25,080,000 J + 3080 J[/tex]

[tex]Q_{total}[/tex] [tex]= 25,083,080 J[/tex]

Energy is a fundamental concept that refers to the ability of a physical system to do work or cause a change. It is a scalar quantity that is measured in units of joules (J) in the International System of Units (SI). According to the law of conservation of energy, energy cannot be created or destroyed, but it can be transformed from one form to another. This means that the total amount of energy in a closed system remains constant.

Energy is a crucial concept in many areas of physics, including mechanics, thermodynamics, and electromagnetism. Understanding energy is essential for understanding how the physical world works, and it has numerous applications in technology and everyday life, from powering our homes and vehicles to the production of food and the functioning of our bodies.

To learn more about Energy visit here:

brainly.com/question/2409175

#SPJ4

The magnitude of the magnetic force experienced by proton 2 will be less than the force experienced by proton 1. This is because the force experienced by a proton is related to the direction of its motion relative to the direction of the magnetic field.

As proton 1 is travelling from east to west, its motion is parallel to the magnetic field, which is aligned in a north-south direction in the continental United States. This means that proton 1 will experience a greater force due to the magnetic field than proton 2, which is travelling in a north-south direction and thus has a motion perpendicular to the magnetic field.
To understand this more clearly, we can consider the equation for the magnetic force:

F = qvB sin θ.

In this equation, the force experienced by a particle is related to the charge (q), velocity (v), and magnetic field strength (B). The sine of the angle between the velocity and magnetic field (θ) is also important as it determines how much of the force will be experienced by the particle. As proton 1's motion is parallel to the magnetic field, it will experience the full force due to the magnetic field, whereas proton 2's motion is perpendicular to the magnetic field and it will only experience a fraction of the force. The magnitude of the force experienced by proton 2 will be lower than the force experienced by proton 1.

For similar question magnitude of the magnetic force

https://brainly.com/question/29237710

#SPJ11

Based on the given question, the resistance will: increase with the increase in voltage.

The reason behind this is that resistance and voltage have a direct relationship. As the voltage increases, the resistance also increases. This can be explained by Ohm’s Law which states that V= IR where V is voltage, I is current and R is resistance. As per the second part of the question, it is implied that the resistance varies with temperature.

The resistance of any material depends upon temperature, and a rise in temperature increases the resistance of the material. The light bulb acts as a resistor, and its resistance will increase as the temperature increases due to an increase in the temperature of the filament of the bulb.

The resistance is directly proportional to the temperature of the bulb, and it is represented by the equation

R = R₀ (1 + αt),

where R is resistance, R₀ is the resistance at a particular temperature, α is the temperature coefficient of resistance, and t is the temperature difference in Celsius.

Therefore, based on the data provided, it can be concluded that resistance increases with the increase in temperature which results in the heating of the light bulb, which is a resistor.

To know more about resistance refer here:

https://brainly.com/question/29427458#

#SPJ11

The correct statement about the relationship between the two forms of Newton's second law (Fnet = dp/dt and Fnet = m.a) is option D "Fnet = m.a reduces to Fnet = dp/dt if the momentum of the object does not change with time.

Newton's second law of motion states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. In other words, Fnet = m.a, where Fnet is the net force acting on an object, m is its mass, and a is its acceleration. This law can also be written as Fnet = dp/dt, where dp/dt is the rate of change of momentum with time.

Since momentum is the product of mass and velocity, it can be rewritten as dp/dt = m.dv/dt + v.dm/dt, where v is the velocity of the object. If the mass of the object remains constant over time, then v.dm/dt is zero and dp/dt reduces to m.dv/dt, which is equal to Fnet.

Therefore, Fnet = dp/dt reduces to Fnet = m.a if the object's acceleration does not change with time. If the momentum of the object does not change with time, then dp/dt is zero, and Fnet = dp/dt reduces to zero, which means that Fnet = m.a is also zero. Therefore, Fnet = m.a reduces to Fnet = dp/dt if the momentum of the object does not change with time.

To know more about Newton's second law:

https://brainly.com/question/13447525

#SPJ11

ans= train Q

Sol= 4.5×60= 270

6×60= 360

270÷180=1.5

360÷270=1.3...

1.3... <1.5

The correct answer is option D.2 years

According to Kepler's Third Law of Planetary Motion, T² is proportional to r³, where T is the period of revolution of the planet and r is the distance between the planet and the star.

In order to solve for T,  

AU = 1

Astronomical Unit = the average distance between the Earth and the Sun = 149.6 million kilometres

Therefore, the planet is orbiting at a distance of 149.6 million kilometres from the star.

Substituting the values of r and solving for

T².T² ∝ r³T² ∝ (149.6)³T²

= (149.6)³T²

= 3.522 x 10¹²T

= √3.522 x 10^¹²T

= 1.87 x 10⁶ seconds

T = 31,100 minutes

T = 518 hours

T = 21.6 days

T = 2 years

Therefore, the orbital period of the planet with twice the mass of Earth orbiting at a distance of 1 AU from a star with the same mass as the Sun is 2 years.

To know more about Kepler's third law of planetary motion:

https://brainly.com/question/4978861

#SPJ11

The standard number of bones in the appendicular skeleton varies slightly among individuals, but it is generally accepted that there are 126 bones in the appendicular skeleton of an adult human.

The appendicular skeleton includes all the bones that are attached to the axial skeleton, which includes the skull, vertebrae, and ribcage. The appendicular skeleton consists of the bones of the arms, legs, pelvis, and shoulder girdle. Here is a breakdown of the number of bones in each part of the appendicular skeleton: Arms: 60 bones (30 in each arm) Legs: 60 bones (30 in each leg) Pelvis: 2 bones Shoulder girdle: 4 bones Adding up these numbers gives a total of 126 bones in the appendicular skeleton. However, this number can vary slightly among individuals due to differences in bone structure and development.

Learn more about bones here:

https://brainly.com/question/29606469

#SPJ4

Answer:

in image

Explanation:

I don't think so it helped but through this you can do the question exactly like this ( in this way) ...