Answer:
The mass of bromine liquid that participates in a chemical reaction=12.8 g
Explanation:
We are given that
Total number of moles of bromine liquid participate in chemical reaction=0.0800 moles
We have to find the mass of bromine liquid that participates.
Atomic mass of Br=79.9 g
1 mole of bromine liquid=2 atomic mass of bromine (Br)
1 mole of bromine liquid ([tex]Br_2[/tex]) =[tex]2\times 79.9=159.8 g[/tex]
0.0800 moles of bromine liquid=[tex]159.8\times 0.0800[/tex] g
0.0800 moles of bromine liquid=12.784 g
0.0800 moles of bromine liquid[tex]\approx 12.8[/tex] g
Hence, the mass of bromine liquid that participates in a chemical reaction=12.8 g
A hypnotist's watch hanging from a chain swings back and forth every 0.98 s. What is the frequency (in Hz) of its oscillation?
Answer:
1.02 Hz
Explanation:
frequency= (1/t) = (1/0.98) = 1.02 hz
Senario: 2 years ago, a fruit was smuggled into California on a plane from an exotic, far away land. The homeowner saw that the fruit had maggots and tossed it into the backyard, hoping the seed would grow. The larvae hatched out and moved throughout the area. This fictitious insect will destroy fruit and has the possibility of spreading disease killing the trees. The insect consumes plants in the Prunus species of stone fruits? Look up the plant genus Prunus.
Discussion: The insect has spread over a large area of Southern California, discovered at UC Riverside. What steps would you do to control or eradicate the destructive exotic insect?
PLZ HELP THX WITH COLLEGE LEVEL EXPERICENCE
Answer:
The best existing methods of control—artemisinin-based drug treatment and insect control with chemical sprays and treated bednets—can reduce the burden of disease substantially, and can even eliminate the disease in some regions,
hope this will help you more
An ice freezer behind a restaurant has a freon leak, releasing 47.97 g of C2H2F3Cl into the air every week. If the leak is not fixed, how many kilograms of fluorine will be released into the air over 6 months
Answer:
0.554 kg
Explanation:
We want to find the amount of kilograms of fluorine that will be released into the air over 6 months.
Let's convert to weeks to get;
6 × 4 = 24 weeks
Let's find Mass leak rate of fluorine from the formula;
Mass leak rate = (fluorine mass in freon/molar mass of freon) × leak rate
Molar mass of freon = ((12 × 2) + (1 × 2) + (19 × 3) + (35.5)) = 118.5 g/mol
Thus;
Mass leak rate = ((19 × 3)/(118.5)) × 47.97 = 23.074 g/week
Total fluorine leaked in 6 months = 24 × 23.074 = 553.776 g = 0.554 kg
An oxygen atom with three missing electrons is released near the Van de Graaff generator. What is its energy in MeV at this distance
Answer:
(a) The potential near its surface is 45 * 10^6 V.
(b) The distance from which its center is the potential 1.00 MV is 45 m.
(c) Its energy in MeV when the atom is at the distance found in part b is 132 MeV.
Explanation:
Note: This question is not complete. The complete question is therefore provided before answering the question.
A research Van de Graaff generator has a 2.00-m diameter metal sphere with a charge of 5.00 mC on it. (a) What is the potential near its surface?
(b) At what distance from its center is the potential 1.00 MV?
(c) An oxygen atom with three missing electrons is released near the Van de Graaff generator. What is its energy in MeV when the atom is at the distance found in part b?
The explanation of the answer is now provided as follows:
(a) What is the potential near its surface?
Q = Charge on the generator = 5 mC = 5 * 10^(-3)C
r = Sphere radius = 2 / 2 = 1 m
k = Constant of the electric force = 9 * 10^(9) N . m^2 / C^2
Therefore, the electric potential of a point charge can be calculated as follows:
V = kQ / r
V = (9 * 10^9 * 5 * 10^(-3)) / 1 = 45 * 10^6 V
Therefore, the potential near its surface is 45 * 10^6 V.
(b) At what distance from its center is the potential 1.00 MV?
This implies the distance where the potential is 1 MV.
Since the electric potential of a point charge is as follows:
V = kQ / r
Therefore, we can solve for r and estimate it as follows:
R = kQ / V = (9 * 10^9 * 5 * 10^(-3)) / 1 * 10^6 = 45 m
Therefore, the distance from which its center is the potential 1.00 MV is 45 m.
(c) An oxygen atom with three missing electrons is released near the Van de Graaff generator. What is its energy in MeV when the atom is at the distance found in part b?
The link between the potential difference and electrical potential energy can be stated as follows:
ΔV = ΔU / q
Therefore, we have:
ΔU = qΔV = q(Va - Vb) = 3 * (45 – 1) = 132 MeV
Therefore, its energy in MeV when the atom is at the distance found in part b is 132 MeV.
The chemical formula is different from the empirical formula in
Answer:be careful and relax
Explanation:
Answer:
Hahaha be careful and relax
define a molecular mass and mole
Answer:
A molecular mass is mass on the substance and mole is a unit of substance such as atoms and electrons.
Explanation:
A molecular mass is the mass of a molecule of the substance and is called as molecular weight. Molar mass is measured in moles. Mass of one mole is 6.022x10²³ particles and is expressed in grams. The molar mass is said to be the mass of the given substance that is divided by the amount of the substance and s expressed in g/ml.Molecular mass: A molecule's molecular mass is equal to the sum of all of the atoms' individual atomic masses. It establishes the molecular mass of a single unit.
Example:
Molecular mass of O2 = 32 atomic mass units
Mole: A mole is [tex]6.02214076 x 10^2^3[/tex]of any chemical unit, including atoms, molecules, ions, and others. Due to the large number of atoms, molecules, or other components that make up any material, the mole is a useful measure to utilize. The initial definition of the mole was the number of atoms in 12 grams of carbon-12.
Learn more about mole here:https://brainly.com/question/22540912
A chemist measures the amount of iodine solid produced during an experiment. He finds that of iodine solid is produced. Calculate the number of moles of iodine solid produced. Round your answer to significant digits.
The question is incomplete, the complete question is:
A chemist measures the amount of iodine solid produced during an experiment. He finds that 8.31 g of iodine solid is produced. Calculate the number of moles of iodine solid produced. Round your answer to the correct number of significant digits.
Answer: The number of moles of solid iodine produced is 0.0327 moles
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of solid iodine = 8.31 g
Molar mass of solid iodine = 253.8089 g/mol
Plugging values in equation 1:
[tex]\text{Moles of solid iodine}=\frac{8.31g}{253.8089g/mol}=0.0327mol[/tex]
Hence, the number of moles of solid iodine produced is 0.0327 moles
How to calculate the actual volume (ml) of water removed from the burette with water
density 1 g/ml:
i. 5mL of water removed
Answer:
Explanation:
The density of pure water is 1 gram per 1 milliliter or one cubic cm. By knowing the density of water we can use it in dilution equations or to calculate the specific gravity of other solutions.
It can also help us determine what other substances are made of using the water displacement experiment. This is done by observing how much water is displaced when an object is submerged in the water. As long as you know the density of the water, the mass of the object being submerged and the volume of increase you can calculate the density of the object.
This was done by the great Archimedes in discovering what composed the kings crown.
What is the percent yield of the reaction below if 84.0 grams of Al2O3(s) is recovered from a reaction whose theoretical yield of Al2O3(s) is 104 grams?
4 Al(s) + 3 O2(g) → 2 Al2O3(s)
Answer:
80.8%
Explanation:
Let's consider the following balanced equation.
4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)
The mass obtained of Al₂O₃ (experimental yield) is 84.0 g. The theoretical yield of Al₂O₃ is 104 g. We can calculate the percent yield of Al₂O₃ using the following expression.
%yield = (experimental yield / theoretical yield) × 100%
%yield = (84.0 g / 104 g) × 100% = 80.8%
Answer:
Percent Yield = 80.8%
Explanation:
We can find the percent yield of a reaction using the equation:
Percent yield = Actual yield (g) / Theoretical Yield (g) * 100
Where Actual yield is the amount of product produced (84.0g)
And theoretical yield is the mass produced assuming a 100% of product (104.0g)
Replacing the computed values:
Percent yield = 84.0g / 104.0g * 100
Percent Yield = 80.8%
Which of the following was NOT explained by Dalton's atomic theory?
ANSWER:
A. the Law of Multiple Proportions
B. the difference between elements and compounds
C.?the difference between isotopes of an element
D. the Law of Conservation of Mass
Answer:
A. the Law of Multiple Properties
Answer:
A. the law of multiple proportions
When sodium chloride, NaCl , dissolves in water, the solution contains ___________________ in addition to the water solvent. The partial charges in water help dissolve the compound as the hydrogen end of water is attracted to the ____________ and the oxygen end is attracted to the _______________
Answer:
sodium ions and chloride ions
chloride ion
sodium ion
Explanation:
Ionic substances are composed of ions. When you dissolve an Ionic substance in water, the ions that compose the substance together with water molecules are present in solution.
Hence, when sodium chloride is dissolved in water, sodium ions and chloride ions are released in solution.
Water has a dipole moment. Hence, the chloride ions are attracted to hydrogen (the positive end of the dipole) while sodium ions are attracted to oxygen (the negative end of the dipole).
This is how the solid is dissolved in water.
When sodium chloride, NaCl , dissolves in water, the solution contains sodium and chloride ions in addition to the water solvent. The partial charges in water help dissolve the compound as the hydrogen end of water is attracted to the chloride ions and the oxygen end is attracted to the sodium ions.
What molecules are soluble in water?Those molecules in which positive ion as well as negative ion is present, will show solubility in water.
Sodium chloride (NaCl) is an ionic compound, which dissociates into sodium ion and chloride ion in the water. As in the water H⁺ ions are present which get attracted towards the chloride ions (Cl⁻) and hydroxide ion (OH⁻ ion) get attracted towards the sodium ions (Na⁺) and show complete dissolution.
Hence correct answers are sodium and chloride ions, chloride ion and sodium ion.
To know more about solubility in water, visit the below link:
https://brainly.com/question/16903071
Pls pls pls help me
define saturated and unsaturated fats
Answer:
unsaturated fats, which are liquid at room temperature,are different from saturated fat because they contain one or more double bonds and fewer hydrogen atoms on their carbon chain.
A piece of solid tin is submerged in silver nitrate solution a reaction occurs producing tin(IV) nitrate solution and solid silver
Write a word equation write a skeleton equation write a balanced chemical equation
Answer:
Tin + silver trioxonitrate V -------->Tin IV nitrate + silver
Explanation:
The term word equation refers to an equation in which the reactants and products are written in words rather than chemical symbols.
Note than tin is above silver in the electrochemical series hence silver will be displaced by tin as follows;
Tin + silver trioxonitrate V -------->Tin IV nitrate + silver
Calculate the solubility (in mol/L) of Fe(OH)3 (Ksp = 4.0 x 10^-38) in each of the following situations:
(A) Pure water (assume that the pH is 7.0 and remains constant).
(B) A solution buffered at pH = 5.0.
(C) A solution buffered at pH = 11.0.
Answer:
(A) 1.962x10^-10 M solubility in pure water
(B) 4.0 x 10^-33 M solubility
(C) 4.0 x 10^-27 M solubility
Explanation:
(A) Fe(OH)3 would give (Fe3+) and (3OH-)
Ksp = [Fe^3+][OH-]^3 = 4.0 x 10^-38
Let y = [Fe^3+]
Let 3y = [OH-]
4x10^-38 = (y)(3y)^3
4x10^-38 = 27y^4
y^4 = 4x10^-38 ÷ 27
y^4 = 1.481 x 10^-39
y = 1.962x10^-10 M solubility in pure water
(B) pH = 5.0
5.0 = - log [OH-]
-5.0 = log [OH-]
[OH-] = 10^-5.0 = 1.0 x 10^-5 M
So, Ksp = [Fe^3+][OH-]^3 = 4.0 x 10^-38
[Fe^3+][1.0 x 10^-5] = 4.0 x 10^-38
[Fe^3+] = 4.0 x 10^-38 ÷ 1.0 x 10^-5
= 4.0 x 10^-33 M solubility
(C) pH = 11.0
11.0 = - log [OH-]
-11.0 = log [OH-]
[OH-] = 10^-11.0 = 1.0 x 10^-11 M
So, Ksp = [Fe^3+][OH-]^3 = 4.0 x 10^-38
[Fe^3+][1.0 x 10^-11] = 4.0 x 10^-38
[Fe^3+] = 4.0 x 10^-38 ÷ 1.0 x 10^-11
= 4.0 x 10^-27 M solubility
For an ideal gas, classify the pairs of properties as directly or inversely proportional. You are currently in a sorting module. a. P and n b. V and n c. P and T d. T and V e. P and V1. directly proportional2. inversely proportional
Answer:
the result for the following are (a) P is directly proportional to n
(b) V is directly proportional to T (c) P is directly proportional to T (d) T is inversly proportional to V (e) P is inversely proportional to V
Classify each cation as a weak acid or pH neutral (neither acidic nor basic).
a. Na+
b. Ni2+
c. NH4+
Answer:
a. Na+ is pH neutral
b. Ni2+ = weak acid
c. NH4+ = Weak acid
Explanation:
To know the nature of the cation we need to find the nature of its conjugate base.
If the conjugate base of the ion is a strong base, the ion is neutral.
If the conjugate base is a weak base, the ion is a weak acid:
a. Conjugate base Na+ = NaOH
Sodium hydroxide is a strong base:
Na+ is pH neutral
b. Conjugate base Ni²⁺: Ni(OH)2 is a weak base because is not completely soluble in water. That means:
Ni2+ = weak acid
c. Conjugate base NH4+: NH4OH. Weak base:
NH4+ = Weak acid
Match the description with the type of precipitation being described.
1. Its formation requires very strong updrafts
2. Its formation requires falling through a layer of above freezing air
3. Precipitation from cumuliform clouds is typically of this nature
4. Precipitation from stratus clouds is typically of this nature
Options:
a. Hail
b. Drizzle
c. Shower
d. Freezing Rain
Answer:
1. Its formation requires very strong updrafts = a. Hail
2. Its formation requires falling through a layer of above-freezing air = d. Freezing Rain
3. Precipitation from cumuliform clouds is typically of this nature = c. Shower
4. Precipitation from stratus clouds is typically of this nature = Drizzle
Explanation:
Hail formation requires very strong updrafts, these updrafts are the upward moving air created in a thunderstorm. This period of noticeable thunderstorms creates hails.
Freezing rain requires the presence of warm air, it requires falling through a layer of above-freezing air to the colder air below to produce an ice coating on anything it drops on.
Showers are produced by cumuliform clouds which look like cotton balls. Since cumuliform clouds precipitate too, these clouds can have fluctuating rain in a day in the form of showers.
Drizzle which raises low visibility is considered a type of liquid precipitation since it also falls from a cloud. Drizzle which is obviously smaller in diameter when compared to that of raindrops, however, is common with stratus clouds.
What happens in a flame test?
A. Electrons are excited to higher energy levels and their emissions
are observed.
B. Impurities in a sample are burned off in the flame until a pure
sample remains
C. Electrons are ejected from atoms when a sample is burned in the
flame.
D. A sample is melted in a flame to determine how much energy was
In a flame test electrons are excited to higher energy levels and their emissions are observed. Therefore, option A is correct.
What is flame test ?The flame test is used to visually identify the identity of an unknown metal or metalloid ion based on the properties color the salt turns in the flame of a bunsen burner.
The color of light emitted depends on the energy emitted by an electron returning to its original state.
The flame's heat converts metal ions into atoms, which become excited and emit visible light. In a flame test electrons are excited to higher energy levels and their emissions are observed.
Thus, option A is correct.
To learn more about the flame test, follow the link;
https://brainly.com/question/6357832
#SPJ1
What salt will be produced by the neutralization reaction between hydrochloric acid (HCI) and
the base calcium hydroxide (Ca(OH)2)? Which part of the salt produced will be the conjugate
base of the acid, and which will be the conjugate acid of the base? Write the balanced
equation.
Please help due todayyyy!?!
Answer:
The produced salt is calcium chloride, CaCl₂, whose cation, Ca²⁺, is the conjugate acid of the base and the anion, Cl⁻ the conjugate base of the acid.
Explanation:
Hello there!
In this case, according to the given information, it turns out firstly necessary for us to set up the chemical equation between calcium hydroxide and hydrochloric acid:
[tex]2HCl+Ca(OH)_2\rightarrow CaCl_2+2H_2O[/tex]
It means that the produced salt is calcium chloride, CaCl₂, whose cation, Ca²⁺, is the conjugate acid of the base and the anion, Cl⁻ the conjugate base of the acid.
Regard"
The speed limit on parts of the German autobahn was once set at 286 kilometers per hour (km/h). Calculate the speed limit in miles per hour (mph).
Answer: 178mph
Explanation:
From the question given, we are informed that the speed limit on parts of the German autobahn was once set at 286 kilometers per hour (km/h). Based on the information, the speed limit in miles per hour will then be:
= 286km/h × 1000m/1km × 1mi/1609m
= 178miles per hour
Therefore, the speed limit is 178mph.
what is the mass of insoluble calcium phosphate produced from .555 grams of calcium chloride
Answer:
0.518 g
Explanation:
Step 1: Write the balanced equation
3 CaCl₂ + 2 H₃PO₄ ⇒ Ca₃(PO₄)₂ + 6 HCl
Step 2: Calculate the moles corresponding to 0.555 g of CaCl₂
The molar mass of CaCl₂ is 110.98 g/mol.
0.555 g × 1 mol/110.98 g = 5.00 × 10⁻³ mol
Step 3: Calculate the moles of Ca₃(PO₄)₂ produced
5.00 × 10⁻³ mol CaCl₂ × 1 mol Ca₃(PO₄)₂/3 mol CaCl₂ = 1.67 × 10⁻³ mol Ca₃(PO₄)₂
Step 4: Calculate the mass corresponding to 1.67 × 10⁻³ moles of Ca₃(PO₄)₂
The molar mass of Ca₃(PO₄)₂ is 310.18 g/mol.
1.67 × 10⁻³ mol × 310.18 g/mol = 0.518 g
If a hydrogen atom and a helium atom have the same kinetic energy:________
a. the wavelength of the hydrogen atom will be about 4 times longer than the wavelength of the helium atom.
b. the wavelength of the hydrogen atom will be about 2 times longer than the wavelength of the helium.
c. the wavelength of the hydrogen atom will be roughly equal to the wavelength of the helium atom.
d. the wavelength of the helium atom will be about 2 times longer than the wavelength of the hydrogen atom.
e. the wavelength of the helium atom will be about 4 times longer than the wavelength of the hydrogen atom.
Answer: If a hydrogen atom and a helium atom have the same kinetic energy then the wavelength of the hydrogen atom will be roughly equal to the wavelength of the helium atom.
Explanation:
The relation between energy and wavelength is as follows.
[tex]E = \frac{hc}{\lambda}\\[/tex]
This means that energy is inversely proportional to wavelength.
As it is given that energy of a hydrogen atom and a helium atom is same.
Let us assume that [tex]E_{hydrogen} = E_{helium} = E'[/tex]. Hence, relation between their wavelengths will be calculated as follows.
[tex]E_{hydrogen} = \frac{hc}{\lambda_{hydrogen}}[/tex] ... (1)
[tex]E_{helium} = \frac{hc}{\lambda_{helium}}[/tex] ... (2)
Equating the equations (1) and (2) as follows.
[tex]E_{hydrogen} = E_{helium} = E'\\\frac{hc}{\lambda_{hydrogen}} = \frac{hc}{\lambda_{helium}} = E'\\\lambda_{helium} = \lambda_{hydrogen} = E'[/tex]
Thus, we can conclude that if a hydrogen atom and a helium atom have the same kinetic energy then the wavelength of the hydrogen atom will be roughly equal to the wavelength of the helium atom.
Methanal is the simplest aldehyde, with one carbon atom. Draw the structural model for methanal (using C and H).
[tex] {\bold{\red{\huge{\mathbb{QUESTION}}}}} [/tex]
Draw the structural model for methanal (using C and H and O).
[tex] \huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}[/tex]
First place the C and then make a double bonded O atom with it then fill H to complete all valence spaces
Write an equilibrium expression for each chemical equation involving one or more solid or liquid reactants or products.
Answer:
a.
[tex]Keq=\frac{[HCO_3^-][OH^-]}{[CO_3^{2-}]}[/tex]
b.
[tex]Keq=[O_2]^3[/tex]
c.
[tex]Keq=\frac{[H_3O^+][F^-]}{[HF]}[/tex]
d.
[tex]Keq=\frac{[NH_4^+][OH^-]}{[NH_3]}[/tex]
Explanation:
Hello there!
In this case, for the attached reactions, it turns out possible for us to write the equilibrium expressions by knowing any liquid or solid would be not-included in the equilibrium expression as shown below, with the general form products/reactants:
a.
[tex]Keq=\frac{[HCO_3^-][OH^-]}{[CO_3^{2-}]}[/tex]
b.
[tex]Keq=[O_2]^3[/tex]
c.
[tex]Keq=\frac{[H_3O^+][F^-]}{[HF]}[/tex]
d.
[tex]Keq=\frac{[NH_4^+][OH^-]}{[NH_3]}[/tex]
Regards!
A. Consider the following neutral electron configurations in which n has a constant value. Which configuration would belong to the element with the most negative electron affinity, Eea?
1. 2s2
2. 2s2 2p2
3. 2s2 2p5
4. 2s2 2p6
B. Arrange the following elements from greatest to least tendency to accept an electron.
Rank from greatest to least tendency to accept an electron. To rank items as equivalent, overlap them.
1. Sr
2. Sn
3. Rb
4. Te
5. I
Answer:
2s2 2p5
Rb < Sr< Sn< Te<I
Explanation:
Electron affinity is the ability of an atom to accept electrons to form negative ions.
Electron affinity is a periodic trend that decreases down the group but increases across the period.
This accounts for the trends observed in the answer. The atom having the electronic configuration, 2s2 2p5 must be a halogen and it exhibits the highest value of electron affinity.
Also, since electron affinity increases across the period, the electron affinities of the elements increases. Therefore, the arrangement of atoms as shown in the answer depends on increasing electron affinity.
explain why the melting point of a solid is equal to the freezing point of it's liquid.
Explanation:
Because melting point and freezing point describe the same transition of matter, in this case from liquid to solid (freezing) or equivalently, from solid to liquid (melting). It is stuck on 0 ∘C during the entire melting or freezing process. None except melting is when you heat up and freezing when you cool down.hope it helps.stay safe healthy and happy.Compound X has the same molecular formula as butane but has a different boiling point and melting point. What can be concluded about Compound X?
A It is a four-carbon alkene or alkyne.
B It is an optical isomer of butane.
C It is a geometric isomer of butane.
D It is a structural isomer of butane.
need this for gradpoint:)
Answer:
d
Explanation:
To what volume (in mL) would you need to dilute 20.0 mL of a 1.40 M solution of LiCN to make a 0.0880 M solution of LiCN?
Answer:
To 318.18 mL would you need to dilute 20.0 mL of a 1.40 M solution of LiCN to make a 0.0880 M solution of LiCN
Explanation:
Dilution is the reduction of the concentration of a chemical in a solution and consists simply of adding more solvent.
In a dilution the amount of solute does not vary. But as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.
In a solution it is fulfilled:
Ci* Vi = Cf* Vf
where:
Ci: initial concentration Vi: initial volume Cf: final concentration Vf: final volumeIn this case:
Ci= 1.40 MVi= 20 mLCf= 0.088 MVf= ?Replacing:
1.40 M* 20 mL= 0.088 M* Vf
Solving:
[tex]Vf=\frac{1.40 M* 20 mL}{0.088 M}[/tex]
Vf= 318.18 mL
To 318.18 mL would you need to dilute 20.0 mL of a 1.40 M solution of LiCN to make a 0.0880 M solution of LiCN
Aqueous hydrobromic acid (HBr) will react with solid sodium hydroxide (NaOH) to produce aqueous sodium bromide (NaBr) and liquid water (H2O). Suppose 5.7 g of hydrobromic acid is mixed with 0.980 g of sodium hydroxide. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
The maximum mass of water that could be produced by the chemical reaction=0.441g
Explanation:
We are given that
Given mass of HBr=5.7 g
Given mass of sodium hydroxide=0.980 g
Molar mass of HBr=80.9 g/ Mole
Molar mass of NaOH=40 g/mole
Molar mass of H2O=18 g/mole
Reaction
[tex]HBr+NaOH\rightarrow H_2O+NaBr[/tex]
Number of moles=[tex]\frac{given\;mass}{molar\;mass}[/tex]
Using the formula
Number of moles of HBr=[tex]\frac{5.7}{80.9}=0.0705 moles[/tex]
Number of moles of NaOH=[tex]\frac{0.980}{40}=0.0245moles[/tex]
Hydrogen bromide is in a great excess and the amount of water produced.
Therefore,
Number of moles of water, n(H2O)=Number of moles of NaOH=0.0245moles
Now,
Mass of water=[tex]n(H_2O)\times Molar\;mass\;of\;water[/tex]
Mass of water=[tex]0.0245moles\times 18=0.441g[/tex]
Hence, the maximum mass of water that could be produced by the chemical reaction=0.441g