Answer:
Radiometric dating or radioactive date is the method that uses radioisotope to date the formation of a rock. The age of the rocks will be determined.
Explanation:
Radioactive deterioration is a natural process and results from the unstable atomic core, which releases bits and parts.
These radioactive particles are released as (there are many types). This decline process results in a more equilibrated nucleus, which makes the atom stable when the number of protons and neutrons balances.
This radioactivity is suitable for dating, as a radioactive "parent" item is constantly decaying into a stable "daughter" element.
A single mineral grain or a whole rock may be dated. There are techniques by which the sample is excited in a nuclear reactor and then measured with a mass spectrometer. The isotope (such as in the argon-argon scheme).
Others put mineral grains under a special microscope, fir in the grains with an ionising laser beam that releases the mineral and the isotopes.
The isotopes are measured by a mass spectrometer inside the same machine (an example of this is SIMS analysis).
NaC2H3O2 product or reactant
Answer:
the reaction between vinegar and baking soda, the reactants are vinegar (acetic acid) and baking soda (sodium bicarbonate). The products are sodium acetate, water, and carbon dioxide gas.
what is Ka for hno2(aq) = h+(aq) + no2-(aq)?
The ionization constant of an acid is denoted by the symbol Kₐ. The smaller the value of Kₐ for an acid, the weaker will be the acid. Thus the correct option is D.
What is acid dissociation constant?The acid dissociation constant denotes the measure of the extent to which an acid dissociates in the solution. The strength of an acid is represented by the value Kₐ. The less an acid dissociates, smaller will be the value of Kₐ, the stronger the acid, higher will be the value of Kₐ.
The dissociation of HNO₂ is given as:
HNO₂ (aq) ⇄ H⁺ (aq) + NO₂⁻ (aq)
The dissociation constant of HNO₂ is given as:
Kₐ = [H⁺][NO₂⁻] / HNO₂
The value of Kₐ is constant at a particular temperature. We can use this fact to find out the pH of a weak acid at a particular temperature.
Thus the correct option is D.
To know more about acid dissociation constant, visit;
https://brainly.com/question/14498573
#SPJ7
If you hit the surface of Iron with a photon of energy and find that the ejected electron has a wavelength of .75 nm, what is the wavelength of the incoming photon in nanometers?
Answer:
The wavelength of the incoming photon is 172.8 nm
Explanation:
The wavelength of the incoming photon can be calculated with the photoelectric equation:
[tex] KE = h\frac{c}{\lambda_{p}} - \phi [/tex] (1)
Where:
KE: is the kinetic energy of the electron
h: is Planck's constant = 6.62x10⁻³⁴ J.s
c: is the speed of light = 3.00x10⁸ m/s
[tex]\lambda_{p}[/tex]: is the wavelength of the photon =?
Φ: is the work function of the surface (Iron) = 4.5 eV
The kinetic energy of the electron is given by:
[tex] KE = \frac{p^{2}}{2m} = \frac{(\frac{h}{\lambda_{e}})^{2}}{2m} [/tex] (2)
Where:
p: is the linear momentum = h/λ
m: is the electron's mass = 9.1x10⁻³¹ kg
[tex]\lambda_{e}[/tex]: is the wavelength of the electron = 0.75 nm = 0.75x10⁻⁹ m
Hence, the wavelength of the photon is:
[tex] \frac{(\frac{h}{\lambda_{e}})^{2}}{2m} = h\frac{c}{\lambda_{p}} - \phi [/tex]
[tex]\lambda_{p} = \frac{hc}{\frac{h^{2}}{2m\lambda_{e}^{2}} + \phi} = \frac{6.62 \cdot 10^{-34} J.s*3.00\cdot 10^{8} m/s}{\frac{(6.62 \cdot 10^{-34} J.s)^{2}}{2*9.1 \cdot 10^{-31} kg*(0.75 \cdot 10^{-9} m)^{2}} + 4.5 eV*\frac{1.602 \cdot 10^{-19} J}{1 eV}} = 1.728 \cdot 10^{-7} m = 172.8 nm[/tex]
Therefore, the wavelength of the incoming photon is 172.8 nm.
I hope it helps you!
What is the reducing agent in the reaction Fe + AgNO3 → Fe(NO3)3 + Ag?
O A. Fe
O B. AgNO3
C. Fe(NO3)3
O D. Ag
Answer:
A
Explanation:
Fe up to Fe+3
In the given reaction, Fe is a reducing agent. Therefore, option (A) is correct.
What is a reducing agent?A substance in a redox reaction that donates its electrons to another substance and gets oxidized to a higher valency is called a reducing agent.
A reducing agent can be explained as one of the reactants of a redox reaction that can reduce the other reactant of the chemical reaction by donating its electrons.
If the reducing agent will not provide its electrons to other substances in a chemical reaction, then the reduction cannot take place. The given chemical reaction is:
Fe + AgNO₃ → Fe(NO₃)₃ + Ag
In the above reaction, the Fe is in the zero oxidation state and changes into Fe³⁺ in Fe(NO₃)₃ after the chemical reaction So Fe losses its electron and gets oxidized. Therefore, Fe is a reducing agent in this reaction.
Learn more about reducing agent, here:
brainly.com/question/2890416
#SPJ2
I NEED HELP WITH THE LAST 4 BOXES PLEASEEEEEEE
Answer:
0.68°C and 0°C.
Explanation:
The average freezing point of sucrose is 0.68°C whereas the average freezing point is 0°C. Both at these temperatures, turn from liquid into solid state. This point is also called transition point because at this point transition of state occurs of both compounds. When the temperature increases, this solid state is again turn into liquid form so temperature is responsible for this change of states of sucrose and water.
Asap please help 15 points
Explanation:
P_H
and
li_n
hope it helps
QUICK CHECK
Use the periodic table to select which type of bond is present and which of the listed properties is most
likely for each substance.
Substance
Type of bond
Likely property
A А
B
A
Cuzm
Ba
lonic
DO
covalent
02
С
D
metallic
Answer:
Coppell zinc,ironic bond
Explanation:
lt will give away two zinc atoms
Answer:
I will go with Sodium chlorine NaCl
nguyên tử sắt có điện tích hạt nhân là 26+. trong nguyên tử, số hạt mang điện nhiều hơn số hạt không mang điện là 22. Hãy xác định số khối của nguyên tử sắt
Answer:
I don't know yr language
A pupil has drawn the electronic structure of fluorine and the diagram is shown below. However,
mistakes have been made. State three mistakes that have been made.
Fl atomic number: 9
Fl atomic mass: 10
(ps i have two of these but can’t figure out the last)
Answer:
The number of electrons in the orbit is wrong they have to be 9 and not 10since flourine is in group 7 the number of electrons in the outer most shell has to be 7 and not 2the first shell has 8 instead of 2 electronsI hope this helps
PLEASE HELP QUICK!!! How many molecules are there in 4.00 L of
glucose, C6H1206? Please show your work!!
hii pls help me to write the ionic equation
Answer:
net ionic equation
[tex]\boxed{ SO_4{}^{2-} {}_{(aq.)} + Ba^{2+} {}_{(aq.)} \rightarrow BaSO_4 {}_{(s)}} [/tex]
Analyse the temperature versus time graph of water, given below.
Which part of graph represent only liquid state and gaseous state and why?
Answer:
Phase C - Liquid State
Phase E - Gaseous State
Explanation:
Usually, in phases of water, we have the following;
When temperature is less than zero, it is said to be in its solid phase as ice.
When temperature is between 0 to 100, we can say it is in the liquid phase as water.
When temperature is above 100°C, It is said to be in the gaseous phase as vapour.
From the diagram;
Phase C is the only liquid state because it falls between temperature of 0°C and 100°
Also, only phase E is in the gaseous phase because the temperature is above 100°C.
Why does nuclear fusion occur in stars but not on Earth?
A.
There are no elements on Earth that can undergo fusion.
B.
Too many free neutrons are present on Earth.
C.
Fusion reactions require a lot of heat and pressure.
D.
Elements capable of undergoing fusion can’t be enriched on Earth.
Answer:
C. Fusion reactions require a lot of heat and pressure
Explanation:
A Nuclear fusion doesn't occur naturally on Earth because it requires temperatures far higher than Earth temperatures. Nuclear fusion takes place only at extremely high temperatures. That's because a great deal of energy is needed to overcome the force of repulsion between the positively charged nuclei.
Use VSEPR theory to predict the electron-pair geometry and the molecular geometry of CH3Cl. a. The electron-pair geometry is linear, the molecular geometry is linear. b. The electron-pair geometry is tetrahedral, the molecular geometry is trigonal-pyramidal. c. The electron-pair geometry is trigonal-planar, the molecular geometry is bent. d. The electron-pair geometry is tetrahedral, the molecular geometry is tetrahedral. e. The electron-pair geometry is trigonal-planar, the molecular geometry is trigonal planar. Group of answer choices
Answer:
d. The electron-pair geometry is tetrahedral, the molecular geometry is tetrahedral.
Explanation:
According to Valence Shell Electron Pair Repulsion Theory, the shape of a molecule depends on the number of electrons pairs surrounding the valence shell of the central atom in the molecule.
In CH3Cl, the central atom is carbon. Carbon has four regions of electron density surrounding it and no lone pairs. Lone pairs cause molecules to deviate from the expected geometry.
Since CH3Cl has no lone pairs on the carbon central atom, both the molecular and electron pair geometries are tetrahedral.
In CH₃Cl, the electron-pair geometry is trigonal-planar, and the molecular geometry is bent. Therefore, option C is correct.
According to VSEPR (Valence Shell Electron Pair Repulsion) theory, the electron pairs around the central atom in CH₃Cl will arrange themselves to minimize repulsion, resulting in a specific geometry.
In CH₃Cl, the central atom is carbon (C), and it is surrounded by three hydrogen atoms (H) and one chlorine atom (Cl).
The electron-pair geometry is determined by the arrangement of these electron pairs.
Molecular geometry considers only the atoms around the central atom, not the lone pairs.
To learn more about the molecular geometry, follow the link:
https://brainly.com/question/31993718
#SPJ6
William adds two values , following the rules for using significant figures in computations. He should write the sum of these two number by using
Answer:
when it comes to adding or subtracting numbers, his final answer should have the same number of decimal places as the least precise value.
For example if you add 2 numbers; 10.443 + 3.5 , 10.443 has 3 decimal places and 3.5 has only one decimal place.
Therefore 3.5 is the less precise value.
So when adding these 2 values the final answer should have only one decimal place.
after adding we get 13.943 but it can have upto one decimal place. then the second decimal place is less than 5 so the answer should be rounded off to 13.9.
the answer is the same number of decimal places as the least precise value
Explanation:
I think this is the answer I'm not sure
Answer: the same number of decimal places as the least precise value
Explanation:
What is the pH of a 1.0 x 10-3 M KOH solution?
A. 10
B. 4.0
C. 11
D. 3.0
Answer:
Option C. 11
Explanation:
We'll begin by calculating the concentration of the hydroxide ion [OH¯] in the solution. This can be obtained as follow:
In solution, KOH will dissociate as follow:
KOH (aq) <=> K⁺(aq) + OH¯(aq)
From the balanced equation above,
1 mole of KOH reacted to produce 1 mole of OH¯.
Therefore, 1×10¯³ M KOH will also react to produce 1×10¯³ M OH¯.
Thus, the concentration of hydroxide ion [OH¯] in the solution is 1×10¯³ M
Next, we shall determine the pOH of the solution. This can be obtained as follow:
Concentration of hydroxide ion [OH¯] = 1×10¯³ M
pOH =?
pOH = –Log [OH¯]
pOH = –Log 1×10¯³
pOH = 3
Finally, we shall determine the pH of the solution. This can be obtained as follow:
pOH = 3
pH =?
pH + pOH = 14
pH + 3 = 14
Collect like terms
pH = 14 – 3
pH = 11
if excess nitrogen gas reacts with 600 cm³ of hydrogen gas at room conditions , calculate the maximum volume of ammonia produced from the reaction? the chemical question is N2 + 3H2 = 2NH3
Answer:
400 cm³ of ammonia, NH₃.
Explanation:
The balanced equation for the reaction is given below:
N₂ + 3H₂ —> 2NH₃
From the balanced equation above,
3 cm³ of H₂ reacted to produce 2 cm³ of NH₃.
Finally, we shall determine the maximum volume of ammonia, NH₃ produced from the reaction. This can be obtained as illustrated below:
From the balanced equation above,
3 cm³ of H₂ reacted to produce 2 cm³ of NH₃.
Therefore, 600 cm³ of H₂ will react to produce = (600 × 2)/3 = 400 cm³ of NH₃.
Thus, 400 cm³ of ammonia, NH₃ were obtained from the reaction.
Which diagram represents this molecule
Answer:
I think it is C
Explanation:
Hope this helps!! :)
If I'm wrong, then greatest apologies
Question 8 of 10
Which of the following is made of matter?
A. Light
B. Energy
C. The sun
D. Heat
Answer: i Choose the sun
because it has mass
Explanation: matter is anything that has mass and occupies space / Volume
and the sun has mass though it is not a solid one, and is made up of matter
HOPE THIS HELPSS!!!!
Chromium forms a complex with diphenylcarbazide whose molar absorptivity is 4.17*10^4 at 540nm. Calculate the absorbance of a 7.68*10^-6 M solution of the complex at 540nm when measured in a 1.00cm cell and the transmittance of the solution.
Answer:
0.32 liters/mole cm.
Explanation:
According to Beer Lambert's law;
A= εcl
ε = molar absorptivity
c= concentration
l= path length
A= 4.17*10^4 × 7.68*10^-6 × 1
A= 0.32 liters/mole cm.
Which is another word for 10 meters in the metric system?
Answer:
Dekameter
Explanation:
What is the reducing agent in the reaction Fe + AgNO3 → Fe(NO3)3 + Ag?
O A. Fe
B. AgNO3
C. Fe(NO3)3
D. Ag
Answer:
A.
Iron, Fe
explanation:
Iron reduces silver nitrate to silver.
Answer:
agno3
Explanation:
just took the quiz
which particle is an atom with only 10 neutrons in its nucleus ?
Answer:
fluorine
Explanation:
Which of the following steps correctly converts 1.25 moles of fluorine to an equivalent mass of fluorine in grams? (5 points)
Add 1.25 to the atomic mass of fluorine.
Divide the atomic mass of fluorine by 1.25.
Subtract 1.25 from the atomic mass of fluorine.
Multiply the atomic mass of fluorine by 1.25.
Explanation:
Given the amount of fluorine is ---- 1.25 mol.
What is the mass of given fluorine in grams?
Since
[tex]Number of moles =\frac{given mass of the substance}{its molecular mass}[/tex]
To get the mass of the substance in grams, multiply the given number of moles with the molecular mass of the substance.
Hence, among the given options, the correct answer is the last option that is
Multiply the atomic mass of fluorine by 1.25.
Answer:
Multiply the atomic mass of fluorine by 1.25.
Explanation:
i got it right on the exam!! :)
What is the action of a catalyst
Answer: A catalyst is a substance that speeds up the rate of a chemical reaction without being used up and remains chemically unchanged itself .
Explanation: For a reaction to take place the particles must collide with enough energy for bonds to break and reaction to occur .
BUT when a catalyst is present the reactants are able to react in a way that requires less energy ,leading to more successful collision so the reaction speeds up without the chemical composition of the catalyst being affected
NOTE: the catalyst must be chosen to suit the particular reaction
HOPE THIS HELPS IF YOU NEED MORE EXAMPLES FEEL FREE TO COMMENT IN THE COMMENT SECTION
How much heat must be transferred to 55 g of ice to change the ice's
temperature from -13°C to -5.0°C? (The specific heat capacity of ice is 2.11
J/g.°C)
make a 450 gram solution with the mass by mass concentration of 7% how much salt and water do you need to mix
1 mole of alkene CxH2x was fully burnt in oxygen. The products were analysed. 264g of Co2 and 108g of of H20 were produced. Use the information to balance the equation and work out the identity of CxH2x.
CxH2x+ O2--> CO2+H2O
PLEASE CAN SOMEONE EXPLAIN THIS TO ME!!!!!!!!!!!!
Answer:
C6H12
Explanation:
Step 1: Find the molar mass of carbon dioxide and water
MH2O = 2(1.008) + 16.00 = 1.802x10^1 g/mol
MCO2 = 12.01 + 2(16.00) = 4.401x10^1 g/mol
Step 2: Calculate the moles of the products
nH2O = 108g / 1.802x10^1 g/mol = 5.99 or about 6
nCO2 = 264g/ 4.401x10^1 g/mol = 5.99 or about 6
Step 3: Enter moles of carbon dioxide and water into the balanced equation
CxH2x + O2 = 6CO2 + 6H2O
Step 4: Balance
We see how there is six carbon dioxide on the right side which means there are six carbons in the equation.
This means x is equal to 6 in our equation.
If you plug the information into the equation you get:
C6H12 + O2 = 6 CO2 + 6 H2O
Now all that's left is to balance the oxygens
We see how there is 18 oxygens on the right side of the equation which means there must be 18 on the left side.
Because we have oxygen gas we divide 18 by 2 which means there are 9 O2's on the left side
Therefore, the balanced equation is C6H12 + 9O2 = 6 CO2 + 6 H2O
HELLO EVERYONE PLEASE I NEED HELP WITH
Please I REALLY NEED A HELP WITH THIS PLEASE HELP ME
THIS HARRY POTTER LITERARY ESSAY
OUTLINE
1. Love and Friendship is a central theme in Harry Potter and the Philosopher's Stone. Prove that this statement is true using 2(two) different characters from the novel as examples.
Introductory Statement/ Hook:
Statement of Intent: reason A and B :
thesis reason A and B:
BODY PARAGRAPH
#1 Point #1: Introduce REASON A here, but use general statement
#1: Provide quotations from the novel to support Reason A
Explanation #1:
Proof #2:
Explanation #2:
BODY PARAGRAPH
#2 Point #2: Introduce REASON B here, but use general statements
#1: Provide quotations from the novel to support ReasonB
Explanation #1:
Proof #2:
Explanation #2:
CONCLUSION
Restate/ Summarize Thesis:
Restate/ Summarize Points:
Answer:
Ron and Hermoine
Explanation:
They always fought over petty things, but at the end, they did end up together!
(Answer for your question about love and friendship being a central theme in Harry Potter and the Philosopher's stone)
*ALSO, MY ANSWER MIGHT BE WRONG* so be sure to use a pencil just in case!
Draw the following structures and name them :
I. CH3CH2(OH)
II.CH3CH2CH(CH3)C(Cl)2C(l)2CH(F)OH
III.CH3CH(CH3)CHO
IV.CH2=CH(OH)
V.CH3OCH2CH3
Answer:
hope this helps.answer is in the picture
