QUESTION 1: What conclusion can you make on whether any of the liquids are the same. Explain based on the information in the table.
Sample 2 & 4 are the same, but in different amounts. We can tell this because, looking at the table, the boiling points and the densitities are the same. The mass and volume may be different, but this is because they are in different amounts as said earlier.
QUESTION 2: Describe what is good and what might be improved about Carl's models in explaining how the three states of water are different in the arrangement of their water molecules.
Carl's models have a good start. They state how ice is a solid, water is a liquid, and vapor is a gas. It also states how ice has more structure than water and how water has more structure than vapor.
Some things that could be improved upon is how ice (a solid) will keep it's shape, a liquid (water) will change shape to fit the "bottom" of the container, and how vapor (a gas) will change shape to fill the whole conatiner and will need a lid. His models somewhat show this, but he could add onto it to make it improved.
I hope this helps, have a nice day! :D
A mountain climber encounters a crevasse in an ice field. The opposite side of the crevasse is a height h lower, and is separated horizontally by a distance w. To cross the crevasse, the climber gets a running start and jumps in the horizontal direction. If the height of the crevasse increases but the width remains the same, then,
Select one:
O a. the minimum speed needed to cross the crevasse stays the same.
O b. the minimum speed needed to cross the crevasse will depend on the mass of the mountain climber.
O c. the minimum speed needed to cross the crevasse decreases.
O d. the minimum speed needed to cross the crevasse increases.
O e. the minimum speed needed to cross the crevasse will depend on the weight of the mountain climber.
1.25 is closer to 1.04 or not ?
plz heelp plz
Answer:
No, it is closer to 1.30
Explanation:
Explain how friction keeps a nail in place in a block of wood. If you try pull out the nail which way does friction act? I will give brainliest!
Answer:
Friction acts in the opposite direction of the velocity. As static friction acts in the opposite direction to the acceleration. (opposite way)
Explanation:
who discovered Absolute Temperature
Answer: William Thomson, better known as Lord Kelvin
Am object of mass in a circular path of radius 100metres with the speed of 10metres/second.calculate the acceleration towards the center
Answer:
is 6
Explanation:
h
A meter stick is attached to one end of a rigid rod with negligible mass of length l = 0.302 m. The other end of the light rod is suspended from a pivot point, as shown in the figure below. The entire system is pulled to a small angle and released from rest. It then begins to oscillate. A meter stick hung from a rod of length l. The rod is attached to the ceiling. The rod and meter stick extend downward in a straight line making a small angle with the vertical. (a) What is the period of oscillation of the system (in s)? (Round your answer to at least three decimal places.)
The period of oscillation of the system nearest to three decimal places
= 1.092 seconds
The period of an oscillation occurring in a system is the time taken to complete one cycle.
The formula that is used to calculate the period of oscillation (T) is
= 2π√[tex]\frac{l}{g}[/tex]
But,
π = 3.14159 (constant)
g= 10m/s² (acceleration due to gravity)
l = 0.302 m
Therefore T = 2 × 3.14159 × √[tex]\frac{0.302}{10}[/tex]
= 6.28318 x √0.0302
= 6.28318 x 0.17378
= 1.09189s
= 1.092 seconds ( to the nearest three decimal places)
Learn more here:
https://brainly.com/question/23752181
A proton is released in a uniform electric field and it experiences an electric force of 2.18x10^-14N toward south .What are the magnitude and direction of the electric field
Answer:
F = E q
E = 2.18E-14 / 1.6E-19 = 1.36E5 N/C
The direction of the field will be the same as force on the proton - southerly
Please help if u can thanksss
Answer:
yes its okay i think so it is the correct answer
Does the stone remain at a constant speed? Or does it speed up?
Answer:
it would remain the same speed
Explanation: the rock isnt going down a hill or anything so therefore if gravity isnt pulling it down a slope then it would remain the same pace
Acceleration of a car that speeds from 4.3 m/s to 12.9 m/s in 2 seconds
Explanation:
let v1 = 4.3 m/s
v2 = 12.9 m/s
t = 2 seconds
v2 = v1 + at
12.9 = 4.3 + a×2
2a = 12.9 - 4.3 = 8.6
a = 8.6/2
a = 4.3 m/s^2
When an elastic object is changed from its original shape:
A:Energy is released
B:Work is done
C:It is ruined
D:It makes a twanging sound
Answer:
deformation : elastic deformation is reversed when the force is removed. inelastic deformation is not fully reversed when the force is removed – there is a permanent change in shape.
Explanation:
tysm
b) A ball thrown vertically into the air
Discuss newton law
The first law is used to visualize this. The ball is at a consistent velocity, unless acted on by another force, when the ball goes upwards and there's no force acting on it, it keeps going upwards, but there is gravity. When the ball is going up, you do not interact with it, thus only gravity is the only force, making the ball go downwards.
To examine this, apply the first law. When the ball is moving upward and there is no force acting on it, it continues to move higher but there is gravity. The ball is at a constant velocity unless pushed upon by another force.
What is gravity?According to Newton's law of gravity, every particle of matter in the universe is attracted to every other particle with a force that varies directly as the product of their masses and inversely as their distance from one another.
Anything that can alter an object's motion is a force. When you toss a ball, you apply force in a direction that determines the direction in which it will move. The ball travels farther the harder you toss it because it is under greater stress.
The ball continues to go upward even though there is no force pushing against it because of gravity. Unless another force pushes on it, the ball is moving at a steady speed.
Thus, this way, when ball thrown vertically into the air shows Newton's first law.
For more details regarding Newton's laws of motion, visit:
https://brainly.com/question/29775827
#SPJ2
How can gravity's role in tectonic plate motion be described?
Answer: In ridge push, the mantle wells upward because of the convection and elevates the edges of spreading oceanic plates. Because these plates are higher at the spreading center, they are forced downhill due to gravity and eventually flatten out to the ocean floor.
the answer I need points for my math test
The use of non-renewable energy resources in the UK has changed in the last 30 years.
Explain how the use of energy resources has changed in the last 30 years.
Answer: Varies
Explanation: It became more relied upon, technology is responsible for this.
An object is moving due north at 31m/s. Does this tell you the speed of the velocity of the object or both?
Answer:
speed
Explanation:
its the speed
because the formula for deriving speed is distance/time
the unit for distance is metre
the unit for time is seconds
so speed is metre/seconds
so speed us m/s.
The figure shows the light intensity on a screen behind a double slit. The slit spacing is 0.22 mm and the screen is 2.0 m behind the slits (Figure 1). What is the wavelength of the light?
The wavelength of the light is 550 nm
For a double slit interference pattern with slit spacing, d we have
dsinθ = mλ where d = slit spacing = 0.22 mm = 0.22 × 10⁻³ m, m = number of maximum fringe = 2(from the picture) and λ = wavelength of light.
Thus sinθ = mλ/d
Also, tanθ = L/D where L = distance between central maximum and fringe = 2.0 cm/2 = 1.0 cm = 1 × 10⁻² m and D = distance between slit and screen = 2.0 m
Since θ is small, sinθ ≅ tanθ
So, mλ/d = L/D
Making λ subject of the formula, we have
λ = dL/mD
Substituting the values of the variables into the equation, we have
λ = dL/mD
λ = 0.22 × 10⁻³ m × 1 × 10⁻² m/(2 × 2.0 m)
λ = 0.22 × 10⁻⁵ m²/4.0 m
λ = 0.055 × 10⁻⁵ m
λ = 0.55 × 10⁻⁶ m
λ = 550 × 10⁻⁹ m
λ = 550 nm
So, the wavelength of the light is 550 nm
Learn more about double slit interference here:
https://brainly.com/question/4449144
A bicyclist travels 30 km in 2 hours east. Calculate its velocity?
Answer:
Its velocity would be
15 km per hour
or
0.00416667 per second
I need the answer for this question
Answer:
Since impedance = omega * L we can use the equation for resistance:
20 + 12 + 10 in parallel with 7 we have
J1 = 42 * 7 / 49 = 6 H for the combination on the right
4 H + 6 H + 8 H = 18 H for the entire combination
A hot air balloon rising vertically is tracked by an observer located 2 miles from the lift-off point. At a certain moment, the angle between the observer's line-of-sight and the horizontal is , and it is changing at a rate of 0.1 rad/min. How fast is the balloon rising at this moment
We have that for the Question, it can be said that
the balloon rising at [tex]0.266miles/min[/tex]From the question we are told
An observer located 2 miles from the lift-off point. At a certain moment, the angle between the observer's line-of-sight and the horizontal is , and it is changing at a rate of 0.1 rad/min.From,
[tex]tan\theta = \frac{h}{2}[/tex]
differentiate with respect to h
[tex]sec^2\theta * \frac{do}{dz} = \frac{1}{2} * \frac{dh}{dz}\\\\\frac{dh}{dz} = 2 sec^\theta * \frac{d\theta}{dz}\\\\\theta = \frac{\pi}{6} and \frac{d\theta}{dz} = 0.1rad/min\\\\\frac{dh}{dz} = 2sec^2 (\frac{\pi}{6}) * (0.1)\\\\= 0.266miles/min[/tex]
For more information on this visit
https://brainly.com/question/23379286
PLEASE PLEASE HELP!!
An arrow is shot straight up in the air from the ground with an initial velocity of 54.0 m/s. If on striking the ground it
embeds itself 15.0 cm into the ground, what is the acceleration required to stop the arrow when it hits the ground?
Answer:
you have patience the distance.
Explanation:
the train leaves at 6.30.
HELP PLS! :/
A ball thrown straight up takes 1.89s to reach a height of 41.6m.
Taking g =9.81 m/s2 the balls initial speed was:
Help plsss
Explanation:
formula: Vi = Vf - (at)
Vi: intial velocity
Vf: final velocity
a: acceleration
t: time
fill in formula with the numbers you are given
Vi= 41.6m - ((9.81 m/s^2)(1.89s))
parenthesis first according to pemdas
Vi= 41.6m - 18.54m/s
Answer: 23.06m/s
disclaimer: I havent done physics in awhile so I have no idea if this is right. just an attempt to help steer you in the right direction hopefully. good luck
what a function of vacuole
Answer:
A vacuole is in both, plant and animal cells. It's main purpose is to isolate waste products, or in other words making sure that harmful materials won't damage the cell.
Answer:
In animal cells, they help sequester waste. In plants, they help maintain water balance.
A 770-kg two-stage rocket is traveling at a speed of 6.90×103 m/s away from Earth when a predesigned explosion separates the rocket into two sections of equal mass that then move with a speed of 2.60×103 m/s relative to each other along the original line of motion.What is the speed of each section (relative to Earth) after the explosion?How much energy was supplied by the explosion?
Answer:
Explanation:
Let's just have our reference frame travel along with the original un broken mass. This way the original velocity is not relevant.
Each half will have a mass of 770/2 = 385 kg
Each half will have the same magnitude of velocity (conservation of momentum) which will be 2.6 x 10³/2 = 1.30 x 10³ m/s
Now add back the reference frame velocity to get velocity relative to earth.
Section one will have velocity 6.90 x 10³ + 1.30 x 10³ = 8.2 x 10³ m/s
Section two will have velocity 6.90 x 10³ - 1.30 x 10³ = 5.6 x 10³ m/s
In the moving reference frame, each half will have kinetic energy which could only come from the explosion
KE = ½(385)(1.3 x 10³)² = 325,325,000 J
2(325,325,000) = 650,650,000 J released in the explosion.
Rounding to the three significant figures of the problem numerals
E = 6.50 x 10⁸ J or 650 MJ released
A bear slides down an incline which is oriented at 17 degrees above horizontal. What is the coefficient of friction between the bear and the incline if the bear moves with a constant velocity?
[tex]\mu = 0.306[/tex]
Explanation:
Assume that the direction down the incline is the +x-direction. We can apply Newton's 2nd law along the x-axis as
[tex]x:\:\:\:\:\:mg\sin17° - f_s = ma[/tex]
[tex]\Rightarrow mg\sin17° - \mu N = 0[/tex]
where m is the mass of the bear and g is the acceleration due to gravity and acceleration a is zero since the bear is moving with a constant velocity. Along the y-axis, we can write Newton's 2nd law as
[tex]y:\:\:\:\:\:N - mg\cos17° = 0 \Rightarrow N = mg\cos17°[/tex]
Combining these two equations together, we get
[tex]mg\sin17° = \mu(mg\cos17°)[/tex]
Solving for [tex]\mu, [/tex]
[tex]\mu = \dfrac{\sin17°}{\cos17°} = \tan17° = 0.306[/tex]
Alex is x years old . June is 7years older than Alex . their total combined ages is 29 years . find June,s age . show all work algebraically
Answer:
18 yearsExplanation:
Given,
Let Alex be = x years
Then June will be = (7 + x) years
We know that,
Their total combined age is 29 years
Therefore,
By the problem,
=> x + (7 + x) = 29
=> 2x = 29 - 7
=> 2x = 22
=> x = 22 ÷ 2
=> x = 11
So,
Required age of June is = (7 + x) years
= (7 + 11) years
= 18 years (Ans)
Can someone help me .. please I don’t understand.
If you do 72 J of work in 1.2 seconds, how much power is produced
Answer:
Explanation:
Power is the rate of doing work
P = 72 / 1.2 = 60 Watts
Which statement about RNA polymerase is NOT true?
RNA polymerase reads a template strand of DNA 5' to 3'
RNA polymerase binds to a promoter region to initiate transcription
RNA polymerase adds a ribonucleotide to the 3' end of a growing RNA molecule
During transcription of a gene, RNA polymerase reads only one strand of DNA
Please explain!
Answer:
RNA polymerase reads a template strand of DNA 5' to 3'
Explanation:
RNA polymerase is the enzyme accountable for the transcription of the DNA. It shows one coast of the DNA and transcribed within the RNA. It combines the nucleotide to the 3' conclusion of the expanding series of the RNA. It commences the method by connecting to the promoter area of the gene. The enzyme increases nucleotide, not ribonucleotide.
Therefore, A. RNA polymerase reads a template strand of DNA 5' to 3' is false.
Answer:
RNA polymerase reads a template strand of DNA 5' to 3'.
Explanation:
RNA synthesis is less processive during elongation than during initiation. Synthesis begins with the polymerase binding two rNTP molecules. The polymerase frequently releases the nascent transcript before it reaches 8-10 nucleotides in length.
the height of the upper falls at Yellowstone falls is 33.2m. when the water reaches the botton of the falls, its speed is 25.8 m/s. neglecting air resistance, what is the speed of the water at the to of te falls.
Answer:
Hi there
The water acquires a vertical velocity component during the fall equal to
Vy = sqrt(2gH) = 25.5 m/s. Its velocity at the bottom is 25.8 m/s, so the horizontal component at the bottom must be sqrt[(25.8)^2 - (25.5)^2] = 3.9 m/s
That must be the horizontal component at the top also, since it does not change during the fall. It is the velocity magnitude there.
Brainliest pls
Define average atomic mass and explain how it is calculated
Answer:
The average atomic mass of an element is the sum of masses of it's isotopes
Each are multiplied by it's natural abundance
Explanation:
The average atomic mass of an element is the sum of masses of it's isotopes
Each are multiplied by it's natural abundance