2. g A spring extends by 20 cm when a force of 2 N is applied. What is the value of the spring constant in N/m

Answers

Answer 1

10N/m

Explanation:

f=kx

k=f/x

k=20N/0.2m

k=10N/m


Related Questions

A uniform disk with mass 43.9 kgkg and radius 0.280 mm is pivoted at its center about a horizontal, frictionless axle that is stationary. The disk is initially at rest, and then a constant force 29.0 NN is applied tangent to the rim of the disk. Part A What is the magnitude vv of the tangential velocity of a point on the rim of the disk after the disk has turned through 0.400 revolution

Answers

Answer:

1.36 m/s

Explanation:

I = ½mR²

τ = FR

α = τ/I = FR / (½mR²) = 2F/mR

a = Rα = 2F/m

s = θR

v² = u² + 2as

u = 0

v = √2as = √(2(2F/m)(θR)) = 2√(FθR/m)

v = 2√(29.0(0.400)(2π)(0.280) / 43.9) = 1.3636272...

A painter sets up a uniform plank so that he can paint a high wall. The plank is 2 m long and weighs 400 N. The two supports holding up the plank are placed 0.2 m from either end. Show that the upwards force on each of the planks is 200 N. Draw a sketch.

Answers

The upward force on each supporting plank is 200 N

The given parameters include;

weight of the plank, W₁ = 400 Nlength of the plank, l = 2 mupward force of each supporting plank, = W₂ and W₃

To show that the upward force of each supporting plank is 200 N, make the following sketch.

                 W₂                                                           W₃

                  ↑                                                              ↑                                                              

           -----------------------------------------------------------------------

              0.2m                         ↓                               0.2m

                                              400 N

The two supporting planks keeps the 2m plank in equilibrium position. If the plank is in equilibrium position the sum of the upward forces equals sum of the downward force.

W₂  +   W₃ = 400 N

But the distance of each supporting plank from the end is equal, (0.2m).

Then, W₂  =  W₃

2W₂ = 400 N

W₂ = 400N/2

W₂ = 200 N

W₃ = 200 N

Therefore, the upward force on each supporting plank that keeps the plank in equilibrium position is 200 N.

To learn more about equilibrium forces visit: https://brainly.com/question/12582625

A 12-V battery is connected across a device with variable resisstance. As the resistance of the device increases, determine whether the following quantities increase, decrease, or remain unchanged. Indicate your answers with I, D, or U respectively.

a. The current through the device
b. The voltage across the device
c. The power consumed by the device

Answers

the answer is the current through the device

An ink-jet printer steers charged ink drops vertically. Each drop of ink has a mass of 10-11 kg, and a charge due to 500,000 extra electrons. It goes through two electrodes that gives a vertical acceleration of 104 m/s2. The deflecting electric field is _____ MV/m.

Answers

Answer:

  E = 1.25 MV / m

Explanation:

For this exercise let's use Newton's second law

          F = m a

where the force is electric

          F = q E

we substitute

          q E = m a

          E = m a / q

indicate there are 500,000 excess electrons

          q = 500000 e

          q = 500000 1.6 10⁻¹⁹

          q = 8 10⁻¹⁴ C

the mass is m = 10⁻¹¹ kg and the acceleration a = 10⁴ m / s²

         

let's calculate

          E = 10⁻¹¹ 10⁴ / 8 10⁻¹⁴

          E = 0.125 10⁷ V / m = 1.25 10⁶ V / m

          E = 1.25 MV / m

A spherical balloon has a radius of 7.15 m and is filled with helium. The density of helium is 0.179 kg/m^3, and the density of air is 1.29 kg/m^3. The skin and structure of the balloon has a mass of 910 kg. Neglect the buoyant force on the cargo volume itself.
Determine the largest mass of cargo the balloon can lift.

Answers

The largest mass of cargo the balloon can lift is 791.06 kg

First, we need to calculate the mass of helium.

Since the radius of the spherical balloon is r = 7.15 m, its volume is V = 4πr³/3.

The volume of the balloon also equals the volume of helium present.

Now, the mass of helium m = density of helium, ρ × volume of helium, V

m = ρV

Since ρ = 0.179 kg/m³

m = ρV

m = ρ4πr³/3.

m = 0.179 kg/m³ × 4π(7.15 m)³/3

m = 0.179 kg/m³ × 4π(365.525875 m³)/3

m = 0.179 kg/m³ × 1462.1035π m³/3

m = 261.7165265π/3 kg

m = 822.207/3 kg

m = 274.07 kg

Since the mass of the skin and structure of the balloon is 910 kg, the total mass, M of the balloon = mass of skin and structure + mass of helium gas is 910 kg + 274.07 kg = 1184.07 kg.

The weight of this mass W = Mg where g = acceleration due to gravity.

The buoyant force on the balloon due to the air is the weight of air displaced, W' = mass of air, m' × acceleration due to gravity, g.

W' = m'g

Now, the mass of air m' = density of air, ρ' × volume of air displaced, V'

We know that the volume of air displaced, V' = volume of balloon, V

So, V' = V = 4πr³/3.

Since the density of air, ρ' = 1.29 kg/m³,

m' = ρ'V

m = 1.29 kg/m³ × 4π(7.15 m)³/3

m = 1.29 kg/m³ × 4π(365.525875 m³)/3

m = 1.29 kg/m³ × 1462.1035π m³/3

m = 1886.113515π/3 kg

m = 5925.4/3 kg

m = 1975.13 kg

So, the net weight W" that the balloon can lift is W" = W' - W = m'g - Mg = (m' - M )g = (1975.13 kg - 1184.07 kg)g = 791.06g.

So, the net mass m" = W"/g = 791.06g/g = 791.06 kg

This net mass is the largest mass of cargo that the balloon can lift.

Thus, the largest mass of cargo the balloon can lift is 791.06 kg

Learn more about balloons here:

https://brainly.com/question/21890581

A T-shirt is launched at an angle of 30° with an initial velocity of 25 m/s how long does it take to reach the peak? How long is it in the air for totally?

Answers

Answer:

The launched angle θ = 30 degrees, the initial velocity Vo = 20 m/s, the initial horizontal velocity Vox= ?, the initial vertical velocity Voy = ?, the time of flight t = ? the maximum height h = ?

Vox = Vo * (cos of 30 degrees)

Voy = Vo * (sin of 30 degrees)

t = 2 * (Voy / g)

h = Voy * 0.5 t - 1/2 g * (0.5t)^2

I have given the equations for you to use, just plug – in the values and then solve in a step by step manner.

Answer:

approximately 15.68 meters.

Explanation:

Here is how;

First, let's calculate the time of flight for the t-shirt. We can use the vertical motion equation:

y = y0 + v0y * t - 0.5 * g * t^2

where:

y is the vertical displacement (27.7 m)

y0 is the initial vertical position (0 m)

v0y is the vertical component of the initial velocity (v0 * sin(theta))

g is the acceleration due to gravity (9.8 m/s^2)

t is the time of flight

Plugging in the values:

27.7 = 0 + (25.8 * sin(63.6°)) * t - 0.5 * 9.8 * t^2

Simplifying the equation, we get a quadratic equation:

4.9t^2 - (25.8 * sin(63.6°))t + 27.7 = 0

Solving this quadratic equation will give us the time of flight, t. Using the quadratic formula, we find that:

t ≈ 1.23 s

Now, let's find the horizontal displacement of the t-shirt using the horizontal motion equation:

x = x0 + v0x * t

where:

x is the horizontal displacement

x0 is the initial horizontal position (0 m)

v0x is the horizontal component of the initial velocity (v0 * cos(theta))

t is the time of flight

Plugging in the values:

x = 0 + (25.8 * cos(63.6°)) * 1.23

Calculating this:

x ≈ 14.92 m

The t-shirt falls short of reaching the person by the horizontal distance of:

Shortfall = 30.6 m - 14.92 m

Calculating this:

Shortfall ≈ 15.68 m

Therefore, the t-shirt will be approximately 15.68 meters short of reaching the person.

A rock with a mass of 16 kilograms is put aboard an airplane in New York City and flown to Boston. How much work does the gravitational field of the earth do on the rock

Answers

The work done by the gravitational field of the earth on the rock is 9.998 x 10⁸ J.

The given parameter include:

the mass of the object, m₁ = 16 kg

Note: the mass of the earth, m₂ = 5.972 x 10²⁴ kg

The work done by the gravitational field of the earth is given as;

Work done = gravitational force (F) x radius of the earth (R)

[tex]Work \ done = \frac{Gm_1m_2}{R^2} \times R\\\\Work \ done = \frac{Gm_1m_2}{R} \\\\where;\\\\R \ is \ the \ radius \ of \ the \ earth = 6,378 \ km = 6,378,000 \ m\\\\G \ is \ the \ universal \ gravitation \ constant = 6.674 \times 10^{-11} Nm^2/kg^2\ \\\\Work \ done = \frac{(6.674 \times 10^{-11} ) \times (5.972\times 10^{24}) \times (16)}{6,378,000 } \\\\Work \ done = 9.998 \times 10^{8} \ J[/tex]

Therefore, the work done by the gravitational field of the earth on the rock is 9.998 x 10⁸ J.

To learn more about work done by gravitational field of the earth visit: https://brainly.com/question/13934028

A solid metal sphere of radius 3 m carries a total charge of -5.5 uc. What is the magnitude of the
electric field at a distance from the sphere's center of (a) 2.9 m and (b) 8 m? How would the answers
differ if the sphere was (c) a thin shell.
IN​

Answers

Answer:

2.9::: 5.87*10*3 N/C

8: 7.73 × 10 ^2  N/C

Explanation: https://study.com/academy/answer/a-solid-metal-sphere-of-radius-3-00-m-carries-a-total-charge-of-5-50-muc-what-is-the-magnitude-of-the-electric-field-at-each-of-the-following-distances-from-the-sphere-s-center-a-3-10-m-b-8-00-m.html


Which wave has the highest frequency when traveling through the indicated metal?
Wavelength of 2.1 m in copper
Wavelength of 1.4 m in lead
Wavelength of 0.9 m in brass
Wavelength of 1.8 m in gold

Answers

Answer:

wavelength of 1.4in lead

Answer:

0.9

Explanation:

What is measurement

Answers

Answer:

Measurements refers to a process which typically involves identifying and determining the dimensions of a physical object.

Explanation:

A scientific method can be defined as a research method that typically involves the use of experimental and mathematical techniques which comprises of a series of steps such as systematic observation, measurement, and analysis to formulate, test and modify a hypothesis.

Measurements refers to a process which typically involves identifying and determining the dimensions of a physical object.

Basically, the dimensions include important parameters such as width, height, length, area, volume, circumference, breadth, etc.

a youthful person run at 7km/h in a north- west direction across the derk of a ship in which is streaming due east at 40 km/h .ifind the velocity of the boy relative to the Sea
ii,And the velocity of the sea relative to the boy​

Answers

Answer:

velocity of ship wrt sea= 7i∧

velocity of women on deck= 40j∧

velocity of women relative to sea will be resultant of above two velocoties,

7i∧ + 40j∧ magnitude is

square root (7 x 7 + 40x40)

=√49+1600

=√1612

=40.14 m/s

A roller coaster has a vertical loop with radius 25.7 m. With what minimum speed should the roller-coaster car be moving at the top of
the loop so that the passengers do not lose contact with the seats?
m/s

Answers

Answer:

15.88m/s

Explanation:

At the top of the roller coaster you will have three forces acting on the roller-coaster. See the image below. Fc is the centripetal force (for an object in circular motion), Fg is the gravitational force, and Fn is the normal force. To achieve the minimum speed we assume the roller-coaster is barely touching the vertical loop and so the normal force is zero. This leaves two acting forces.

[tex]F_g = F_c\\mg = \frac{m\times v^2}{r}\\v = \sqrt{gr} = \sqrt{9.81 \times 25.7} = 15.88 m/s[/tex]

need help with question after number 40

Answers

Answer:

4 device 3 e e and 4 divide 3 + 5 barabar 11 33 size to 46 size 35 and size 49 browser

List what sources of uncertainty go into calculating the wavelength of the laser (no explanation necessary here). (b) Accurately report the uncertainties for these quantities. (c) Explain which of these contributes the most to the final uncertainty on the laser wavelength

Answers

Answer:

thanks for da 5points hoi

Explanation: thanks dawg

There can be uncertainty in calculating the wavelength of a laser light  due to experimental errors

All measurements have an uncertainty, in the case of direct measurements the uncertainty is equal to the precision of the given instrument.

What are uncertainity in measuring ?

Uncertainty  means the range of possible values within which the true value of the measurement lies.

What are errors?

The deviation  in the value of the measured quantity from the actual quantity or true value is called an error

(a) For the calculation of wavelength of laser light , the sources which can lead to uncertainty are

1. least count of measuring instruments like spectrometer or interferometer

2. Parallax error in the measurement

3. Error in identifying the order of fringes

4.. unable to identify the accurate  reading of Vernier or circular scales present in the measuring instruments.

5. Propagating errors

What is least count?

The least count of a measuring instrument is the smallest and accurate value in the measured quantity that can be measured by instrument.

What is propagating error?

When you have derived variables, that is, when measurements are made with different instruments, each with a different uncertainty, the way to find the uncertainty or error is that  all the errors add up. which increases the uncertainty

b. The uncertainty in measurement due to  least count depends on the instrument used for measurement f wavelength. A  Michelson's

interferometer has the least count of .0001mm. whereas spectrometer has a least count of 0.5⁰. Hence uncertainty in the measurement by Michelson's interferometer is very less as compared to any other instrument.

C. The maximum uncertainty arises due to the least count , as all other errors can be minimized by taking an average value of many observations but the least count of an instrument do not change so uncertainty within the least count arises.

To know more on errors and uncertainty in measurements here

https://brainly.com/question/24652157

#SPJ2

How many types of physics?

Answers

Answer:

Two Main Branches of Physics

it is Classical Physics and Modern Physics.

Explanation:

Further sub Physics branches are Mechanics, Electromagnetism, Thermodynamics, Optics, etc. The rapid progress in science during recent years has become possible due to discoveries and inventions in the field of physics.

hope it helped

Which of the following is not an example of approximate simple harmonic motion

Answers

Answer:

where are the options

it's not full question

Define hydropower or hydroelectric power ?
No Spam..

Answers

[tex]\:[/tex]

Hydroelectric power, also called hydropower is the electricity produced from generators driven by turbines that convert the potential energy of falling or fast-flowing water into mechanical energy.

Answer:

Hydroelectric power/hydropower -  electricity produced by a hydraulic source, specifically energy generated falling or flowing water

Chase grew up wanting to wear his sister's dresses over his brother's pants and button up shirts. When Chase turns 18, he decides to begin living as woman, though he's still only sexually attracted to women. He decides he doesn't want to undergo surgery. Chase is

Answers

Explanation:

she is a woman, i dont understand why youre still using he/him after she comes out

A circular parallel-plate capacitor whose plates have a radius of 25 cm is being charged with a current of 1.3 A. What is the magnetic field 11 cm from the center of the plates

Answers

The magnetic field at 11 cm from the center of the plates is 2.364 x 10⁻⁷ T.

Given;

radius of the circular plate, d = 25 cm = 0.25 m

current in the plate, I = 1.3 A

distance from the center of the circular plate, r = 11 cm = 0.11 m

To find:

magnetic field (B)

The magnetic field from the given distance is calculated as from Biot Savart equation:

[tex]B = \frac{\mu_o I}{2\pi r} \\\\where;\\\\\mu_o \ is \ permeability \ of \ free \ space \ 4\pi \times 10^{-7} \ T.m/A\\\\B = \frac{(4\pi \times 10^{-7} ) \times (1.3)}{2\pi \times 0.11} \\\\B = 2.364 \ \times 10^{-6} \ T[/tex]

Therefore, the magnetic field 11 cm from the center of the plates is 2.364 x 10⁻⁷ T.

Learn more here: https://brainly.com/question/17035710

Fish is cold blooded animal

Answers

Yeeeeeeeeeeeeeeea…………………

A mirror forms an erect image 40cm from the object and one third its height where must the mirror be situated ​

Answers

image distance=-40cm=vObject distance=u=?Magnification=m=3

We know

[tex]\boxed{\sf m=-\dfrac{v}{u}}[/tex]

[tex]\\ \sf\longmapsto 3=-\dfrac{-40}{u}[/tex]

[tex]\\ \sf\longmapsto 3=\dfrac{40}{u}[/tex]

[tex]\\ \sf\longmapsto u=\dfrac{40}{3}[/tex]

[tex]\\ \sf\longmapsto u=13.3cm[/tex]

A cowgirl ties one end of a 10.0 m long rope to a fence post (to the left of the cowgirl) and pulls on the other end so the rope is stretched horizontally with a tension of 140 N. The mass of the rope is

Answers

Answer:

Mass is zero if the whole rope is horizontal. Imaginary rope.

Explanation:

With any mass at all, only a small section of the rope will be truly horizontal. The rope curve will be a a catenary.

Which of the following is a form of mechanical energy?
A. Chemical energy
B. Gravitational potential energy
C. Thermal energy
D. Nuclear energy

Answers

Answer:

B

Explanation:

no reason for this answer

B. Gravitational potential energy

The average human walks at a speed of 5km per hour if your PE teacher asks you to walk for 30 minutes in gym class how far would you walk(km)?

Answers

Answer:

2.5 km

Explanation:

Answer:

2.5 km

Explanation:

Distance = speed x time

So =5 x 0.5

Xác định ứng lực trong các thanh BC,
CF và FE của hệ giàn và chỉ rõ các thanh
chịu kéo hay nén. Cho P1=P2=600 lb,
P3=800 lb

Answers

Answer:

............................................

Explanation:

A plastic dowel has a Young's Modulus of 1.50 ✕ 1010 N/m2. Assume the dowel will break if more than 1.50 ✕ 108 N/m2 is exerted. What is the maximum force (in kN) that can be applied to the dowel assuming a diameter of 2.30 cm?

A.
52.3 kN

B.
62.3 kN

C.
72.3 kN

D.
42.3 N

Answers

Answer:

cobina

Explanation:

me 2

1.2miles=__________km

Answers

Answer:

1.931 kilometres is the answer of 1.2 miles

Answer and Explanation:

1 mile = 1.609 km

Set up a fraction to cancel the miles to get the kilometers.

[tex]\frac{1.2mi}{?km} *\frac{1.609}{1mi} = 1.9308km[/tex] <- This is the answer.

#teamtrees #PAW (Plant And Water)

A circular loop of wire 10 cm in radius carries a current of 20 A. The axial magnetic field 15 cm from the center of the loop is approximately:

a. 37 mu-T
b. 13 mu-T
c. 21 mu-T
d. 41 mu-T
e. 18 mu-T]

Answers

Answer:

ans is c

Explanation:

chk photo

The axial magnetic field 15 cm from the center of the loop is approximately 21 μT. Hence, option (c) is correct.

What is magnetic field?

In the vicinity of a magnet, an electric current, or a shifting electric field, there is a vector field called a magnetic field where magnetic forces can be seen. Electric charges in motion and the intrinsic magnetic moments of elementary particles connected to the fundamental quantum characteristic known as spin create a magnetic field.

Given parameters:

Radius of the circular loop: r = 10 cm = 0.10 m.

Current passing through the loop: I = 20 A.

Axial distance of the point: z = 15 cm = 0.15 m.

Hence, the axial magnetic field at that point:

B = (μ₀/4π) 2πR²I/(z²+R²)^(3/2)

By putting these values, we get B = 21 × 10⁻⁶ T = 21 μT.

Learn more about magnetic field here:

https://brainly.com/question/14848188

#SPJ5

Calculate the magnitude of a gravitational force between two object 400kg and 800kg separated by a distance of of 45m (take G =6.67 * 10^-11 Nm^2 kg^-2)

Answers

Answer:

Explanation:

The formula is

[tex]F_g=\frac{Gm_1m_2}{r^2}[/tex] and filling in:

[tex]F_g=\frac{(6.67*10^{11})(400)(800)}{(45^2)}[/tex] and multiply and divide all that out to get

[tex]F_g=1.1*10^{-8}[/tex]  It should really only be 1 significant digit since 400 and 800 both have only 1 significant digit, but I used 2. It should be

[tex]F_g=[/tex] 1 × 10⁻⁸ N

Two concentric current loops lie in the same plane. The smaller loop has a radius of 3.0 cm and a current of 12 A. The bigger loop has a current of 20 A. The magnetic field at the center of the loops is found to be zero.

Required:
What is the radius of the bigger loop?

Answers

Answer:

the radius of the bigger loop is 5 cm.

Explanation:

Given;

current in the smaller loop, I₁ = 12 A

current in the larger loop, I₂ = 20 A

radius of the smaller loop, r₁ = 3 cm

let the radius of the larger loop, = r₂

Apply Biot-Savart's law to determine the magnetic field at the center of the circular loops.

[tex]B= \frac{\mu_0 I}{2r}[/tex]

The magnetic field at the center of the smaller loop;

[tex]B_1 = \frac{\mu_0 I_1}{2 r_1}[/tex]

The magnetic field at the center of the bigger loop;

[tex]B_2 = \frac{\mu_0 I_2}{2 r_2}[/tex]

If the magnetic field at the center is zero, then B₁ = B₂

[tex]B_1 = B_2 = \frac{\mu_0 I_1}{2 r_1} = \frac{\mu_0 I_2}{2 r_2} \\\\\frac{I_1}{ r_1} = \frac{ I_2}{r_2} \\\\r_2 = \frac{I_2 r_1}{ I_1} = \frac{(20 \ A) \times (3.0 \ cm)}{12 \ A} = 5 \ cm[/tex]

Therefore, the radius of the bigger loop is 5 cm.

Other Questions
Which phase happens first in meiosis The assumption that preferences are complete: Group of answer choices means that a consumer will spend her entire income. means that the consumer can compare any two market baskets of goods and determine that either one is preferred to the other or that she is indifferent between them. is unnecessary, as long as transitivity is assumed. recognizes that there may be pairs of market baskets that cannot be compared. make g the subject 4m+2g=p Find the least common multiple of 14 and 22. please help, i don't understand the subject so i need an answer to help me out:) i will give brainliest to a good answer. 27. The part of the Earth where life exists . Mesosphere Stratosphere Troposphere Biosphere can a business operate without a state Gross domestic product is a macroeconomic measure that describes:A. The value of the goods produced in a country divided by its population B. The percentage of people who are looking for a job but cannot find one C. The total value of goods and services a country produces in a year D. The increases in prices of consumer goods over a period of time A company borrowed $4,000 from the bank at an interest rate of 9%. By the end of the accounting period, the loan had been outstanding for 30 days. Demonstrate the required adjusting entry by choosing the correct statement below.Debit Interest payable for $30.Credit Unearned revenues for $30.Credit Interest expense for $30. SOMEONE PLEASE HELP ME WITH THIS AND EXPLAIN EACH ONE AND HOW YOU DID IT PLEASE MY TEACHER SUCK AND ILL GIVE YOU BRAINLY IF U GET IT RIGHT!!!! how did the twenty-sixth amendment address concerns about age discriminations Your roommate Perry is often cranky. One night you overhear Perry yelling at someone on his cell phone. You conclude that Perry is being his irritable self again and feel bad for the person he's talking to. You have made a(n) __________ attribution for Perry's behavior. Economists argue that: (1pts) Question 4 - Economists argue that: Select b) there is an opportunity cost associated with all decisions. as your answer b) there is an opportunity cost associated with all decisions. Select c) economic decisions do not have opportunity costs but other decisions do. as your answer c) economic decisions do not have opportunity costs but other decisions do. Select a) accounting costs consider all types of costs including implicit costs as your answer a) accounting costs consider all types of costs including implicit costs Select d) economic decisions should consider sunk costs as your answer d) economic decisions should consider sunk costs What kind of spelling error do you see in the following passage?Everyone in our after-school art class created a two-dimensional work, such as a painting or drawing, for the art show. Everyone, that is, accept for me. I made a sculpture out of recycled objects. What kind of things do people write about in personal blogs? And in professional blogs? Please help will give brainliest, pls dont just guess 1. How did religious, economic, and political factors shape Portuguese and Spanish claims on the land in Central and South America?2. Compare the effects of competition between European nations on the development of their respective colonies in the Americas. Why is the labor force participation rate important to an economy? How has the labor forceparticipation rate changed over time in the US? What are some major economic anddemographic trends that have affected it? what happens if there is excess or deficit of proteins in our body 20 The metal surface of a kettle is hot. What happens to the cool air outside the kettle when it comes into contact with the hot kettle? A The density of the air decreases and the air falls. B The density of the air decreases and the air rises. C The density of the air increases and the air falls. D The density of the air increases and the air rises.