Answer:
3Ca(OH)2 + 2C6H8O7 → 6H2O + Ca3(C6H5O7)2
And 0.119M is the concentration of the citric acid.
Explanation:
In an acid-base reaction, the proton H+ and the hydroxil ion OH- reacts producing water. The ions of the acid and base (C6H5O7³⁻ and Ca²⁺ ions produce the respective salt) as follows:
Ca(OH)2 + C6H8O7 → H2O + Ca3(C6H5O7)2
To balance the Calcium ions:
3Ca(OH)2 + C6H8O7 → H2O + Ca3(C6H5O7)2
To balance the C6H5O7³⁻ ions:
3Ca(OH)2 + 2C6H8O7 → H2O + Ca3(C6H5O7)2
And to balance the oxygens of water:
3Ca(OH)2 + 2C6H8O7 → 6H2O + Ca3(C6H5O7)2
And this is the balanced reaction.
The moles of Ca(OH)2 that reacts are:
41.27mL = 0.04127L * (0.108mol/L) = 0.004457 moles Ca(OH)2
Moles of citric acid:
0.004457 moles Ca(OH)2 * (2mol C6H8O7 / 3mol Ca(OH)2) = 0.002971 moles C6H8O7
In 25.00mL = 0.02500L:
0.002971 moles C6H8O7 / 0.0250L =
0.119M
^^^^Changes in state of matter are ALWAYS changes.
Answer:
physical
Explanation:
The change in the state of matter is always physical change, because it can be done with physical processes.
When 3-methyl-1-pentene is treated with in dichloromethane, the major product is 1-bromo-3-methyl-2-pentene.
a. True
b. False
Answer:
True
Explanation:
When Methyl Pentene is introduced in a chemical reaction with dichloromethane then the major product will be bromomethylpentene. There can be small amount of bromo methyl pentene than the amount of methyl pentene introduced for reaction.
what is meant by density
Answer:
The degree of compactness of a substance
Why must beta particles be used to detect leaks in a pipe?
Why must beta particles be used to detect leaks in a pipe?
A. Beta particles will not be absorbed by the soil like gamma radiation, but won't pass through the pipe before reaching the leak like alpha radiation would.
B. Beta particles will not cause an electrical discharge like alpha particles when they interact with the metal pipe, or contaminate the water like gamma radiation.
C. Beta particles are not used, only alpha particles are used because they are not harmful to humans.
D. Beta particles will not be absorbed by the soil like alpha particles, but won't pass through the pipe before reaching the leak like gamma radiation would.
Should be D, because alpha particles are absorbed by soil and gamma isn't
Beta particles will not be absorbed by the soil like alpha particles, but won't pass through the pipe before reaching the leak.
What is Beta particle?This type of particle is a high-speed electron and is derived from the process of beta decay.
It is used to detect leaks in pipe because it will not be absorbed by the soil like alpha particles, but won't pass through the pipe before reaching the leak like gamma radiation would.
Read more about Beta particle here https://brainly.com/question/14324290
how do we use the circle of fifths
Explanation:
in the terms of interval,thats a major sixth up or a minor third using the circle of fifths simply move three position clock wise around the to find the relative minor! so starting from C,count one( G),two( D)and then three:A is related to minor key.
lution: What is the molarity of 245 g of H, SO4 dissolved in 1.00 L of solution?
Answer:
Cm = n/V
n(H2SO4) = 245/98 = 2.5 mol
Cm(H2SO4) = 2.5/1 = 2.5 M
Explanation:
A certain polytomic ion contains 49 protons and 50 electrons. What's the net charge of this ion?
Answer:
the charge is -1
Explanation:
because the charge of proton is +and electron -
charge = +49 +(-50)
= -1
Answer:
Net charge is -1
Explanation:
[tex]{ \sf{net \: charge = p {}^{ + } + {e}^{ - } }} \\ = { \sf{49 + ( - 50)}} \\ = - 1[/tex]
The big bang theory suggests that the origin of the universe began with
that exploded and
expanded.
Answer:
Yes?
Explanation:
If you're asking whether or not that's true, then the Big Bang suggests a way the universe might have formed, so yes it's true
Answer:
A star
Explanation:
1.
the process in which plants
and some other organisms use the energy in sunlight to
make food.
2.
a green pigment that traps
energy from the sun.
3. A
a stiff structure that surrounds
and protects a cell; found in plant, fungus, and some
bacteria cells.
4. A
found in the nucleus of
a cell, a long nucleic acid molecule containing the genetic
instructions for the development and functioning of all
living organisms.
5.
cells.
is living things consisting of many
Answer:
1) Photosynthesis
Photosysnthesis is the process in which plantsand some other organisms usethe energy in sunlight to make food.
2) Chloroplast
Chloroplast is a green pigment that traps energy from the sun.
3) Cell Wall
Cell wall is a stiff structure that surrounds and protects a cell; found in plant, fungus, and some bacteria cells.
4) DNA
DNA is found in the nucleus of a cell, a long nucleic acid molecule containingthe
genetic instructions for the development and functioning of all living organisms.
5) Cell Organeles
Cells is living things consisting of many cell organeles
Must click thanks and mark brainliest
Question 9 of 10
Which statement correctly describes magnetic field lines?
O A. They cross each other at right angles.
B. They always point away from a south pole.
C. They show the direction a south pole will point.
D. They join north pole to south pole..
Uhm cell parts and functions
A cell is the structural and fundamental unit of life. The study of cells from its basic structure to the functions of every cell organelle is called Cell Biology. Robert Hooke was the first Biologist who discovered cells
two types of cell
1) Prokaryotes
2) Eukaryotes
Characteristics of Cells
1) Cells provide structure and support to the body of an organism.
2) The cell interior is organised into different individual organelles surrounded by a separate membrane.
3) The nucleus (major organelle) holds genetic information necessary for reproduction and cell growth
[tex]hope \: its \: helpful \: to \: you \: please \: mark \: me \: a \: brainliest[/tex]
A cell is defined as the fundamental, structural and functional unit of all life.
have a great day
God bless you
Two flasks are connected by a closed valve. One contains gas particles and the other contains a vacuum. If the valve is opened such that the particles move until they fill both flasks, the process by which the particles can reconvene entirely in one of the flasks is:
Answer: The process by which the particles can reconvene entirely in one of the flasks is: NONSPONTANEOUS.
Explanation:
The spontaneity of a process can affect the distribution of energy and matter within the system. Different chemical or physical processes have the natural tendency to occur in one direction under a given set of conditions. For example:
--> when water is pour down a hill it naturally flows down but it requires outside energy maybe from a water pump to flow up the hill and ,
--> during an iron rust, iron that is exposed to atmosphere will corrode, but rust is not converted to iron without intentional chemical treatment.
Therefore, a spontaneous process is one that occurs naturally under certain conditions. While a NONSPONTANEOUS process, on the other hand, will not take place unless it is initiated by the continual input of energy from an outside source. A process that is spontaneous in one direction under a particular set of conditions is nonspontaneous in the REVERSE direction.
From the two flasks that where connected through a valve, once the valve was opened, the gas spontaneously becomes evenly distributed between the flasks. To reverse this, it would require an external energy making the reconvening of the particles back to the first flask a NONSPONTANEOUS PROCESS .
A sample of nitrogen gas occupies 117 mL at 100°C. At what
temperature would it occupy 234 mL if the pressure does not
change? (express answer in K and °C)
47
Page
8 I 8
- Q +
Answer:
The new temperature of the gas is 746 K.
Explanation:
Given that,
The volume of the gas, V₁ = 117 mL
Temperature, T₁ = 100°C = 373
Final volume of the gas, V₂ = 234 mL
We need to find the final temperature. The relation between temperature and volume is given by :
[tex]\dfrac{V_1}{V_2}=\dfrac{T_1}{T_2}\\\\T_2=\dfrac{T_1V_2}{V_1}\\\\T_2=\dfrac{373\times 234}{117}\\\\T_2=746\ K[/tex]
So, the new temperature of the gas is 746 K.
Please help chemistry ASAP
Will give brainly
Answer:
B
Explanation:
If the concentration of [CO32−] were doubled (say, by adding a highly soluble carbonate salt such as Cs2CO3), what would be the new concentration of [Li+] in the saturated solution?
Answer:
ufvkoo5dvjutfbnjiiihhb
Many important analgesic compounds are derived from simple aromatic starting materials.
a. True
b. False
A compound with a molecular weight of about 64.47 g/mol was found to be 18.63 % of C, 1.56 % of H, 24.82 % of O, and 54.99 % of Cl by mass. Determine the molecular formula and draw the Lewis structure showing an accurate 3-D perspective. *Show your calculations
Answer:
See detailed explanation.
Explanation:
Hey there!
In this case, according to the given information, it turns out possible for us to solve this problem by firstly calculating the moles of each element, assuming those percentages are masses, so that we divide by their molar masses:
[tex]C=\frac{18.63}{12.01}=1.55\\\\H=\frac{1.56}{1.01} =1.55\\\\O=\frac{24.82}{16.00}=1.55\\\\Cl=\frac{54.99}{35.45}=1.55[/tex]
Then, we divide all of them by 1.55 to realize the empirical formula is:
[tex]CHOCl[/tex]
Whose molar mass is 64.47 g/mol, and therefore, since the molar mass of these two is the same, we infer the molecular formula is also CHOCl.
The Lewis structure is shown on the attached document, whereas, the central atom is C and it does complete its octet as well as both O and Cl.
Regards!
A mixture of gases includes helium, neon, argon and krypton. The partial pressures are as follows:
Partial pressure, mm Hg
He 152
Ne 164
Ar 126
Kr 169
What is the total pressure of the mixture after removing the argon component? Report your answer rounded
to the nearest mm Hg but without units
Answer:
the answer to your question is ar 126
What is a reaction rate?
Answer:
A reaction is the time that is required for a chemical reaction to go essential to completion
Which of the following would have the lowest kinetic energy?
a) Gaseous water
b) Boiling water
c) Liquid water
d) nSolid water
Answer:
d) Solid water
Explanation:
because it's particles are more fixed together ( least apart ), so their mobility and conductivity is very low hence lowest kinetic energy.
Answer:
d. Solid water
Explanation:
example ice
A 2.00-mol sample of hydrogen gas is heated at constant pressure from 294 K to 414 K. (a) Calculate the energy transferred to the gas by heat. kJ (b) Calculate the increase in its internal energy. kJ (c) Calculate the work done on the gas. kJ
Answer:
a) The energy transferred is 6.91 kJ
b) The internal energy is 4.90 kJ
c) The work done on the gas is - 2.01 kJ
Explanation:
Step 1: Data given
Number of moles of hydrogen gas = 2.00 moles
Pressure = constant
Temperature is heated from 294 K to 414 K
Molar heat capacity of hydrogen gas = 28.8 J/mol*K
Step 2: Calculate the energy transferred to the gas by heat.
Q = n* Cp * ΔT
⇒with Q =the energy transferred
⇒with n = the number of moles = 2.00 moles
⇒with Cp = the Molar heat capacity of hydrogen gas = 28.8 J/mol*K
⇒ with ΔT = Temperature 2 - Temperature 1 = 414 - 294 = 120K
Q = 2.00 * 28.8 * 120
Q = 6912 J = 6.91 kJ
Step 3: Calculate the increase in its internal energy.
ΔEint = n*Cv*ΔT
⇒with ΔEint = the increase in its internal energy.
⇒with n = the number of moles = 2.00 moles
⇒with Cv = The constant volume = 20.4 J/mol*K
⇒with ΔT = Temperature 2 - Temperature 1 = 414 - 294 = 120K
ΔEint = 2.00 * 20.4 * 120
ΔEint =4896 J = 4.90 kJ
Step 4: Calculate the work done on the gas.
Work done on the gas = -Q + ΔEint
W = -6.91 kJ + 4.90 kJ
W = -2.01 kJ
What do you predict the chemical formula for the compound formed between calcium and sulfur?
Answer:
calcium donates two vanence electrons to sulfur atom to form Ca2+ ion and an S2+ - ion
An ion of a single pure element always has an oxidation number of ________.
A. None of these
B. magnitude equal to its atomic number
C. 1
D. 0
Answer:
0
Explanation:
pure elements will always possess an oxidation number of 0, regardless of their charge.
Answer:
D.) 0
Explanation:
I got it correct on founders edtell
Given the balanced chemical equation for the decomposition for INO, and the rate of disappearance of INO, write the expressions for the rates of appearance of I2 and NO.
2INO(g) → I2(g) + 2NO(g)
Reactant: Product(I2): Product(NO):
-∆[INO]/2∆t = ??/??
Answer:
rate of disappearance of -0.5d[INO]/dt
rate of appearance of I2 = d[I2]/dt
rate of appearance of No = 0.5*d[NO]/dt
Explanation:
According to chemical equilibrium, d[I₂]/dt and d[NO]/dt is the expressions for the rates of appearance of I₂ and NO respectively.
What is chemical equilibrium?Chemical equilibrium is defined as the condition which arises during the course of a reversible chemical reaction with no net change in amount of reactants and products.A reversible chemical reaction is the one wherein the products as soon as they are formed react together to produce back the reactants.
At equilibrium, the two opposing reactions which take place take place at equal rates and there is no net change in amount of the substances which are involved in the chemical reaction.At equilibrium, the reaction is considered to be complete . Conditions which are required for equilibrium are given by quantitative formulation.
Factors which affect chemical equilibrium are change in concentration , change in pressure and temperature and presence of catalyst.
Learn more about chemical equilibrium,here:
https://brainly.com/question/4289021
#SPJ6
If the concentration of products is increased the equilibrium is shifted from * left to right/ to the left/ right to left /down left
Answer:
to the left
Explanation:
If the concentration of products is increased for a reaction that is in equilibrium, the equilibrium would shift to the left side of the reaction (the reactant's side).
For a reaction that is in equilibrium, the reaction is balanced between the reactants and the products. According to Le Cha telier's principle, if one of the constraints capable of influencing the rate of reactions is applied to such a reaction that is in equilibrium, the equilibrium would shift so as to neutralize the effects created by the constraint.
Hence, in this case, if the concentration of the products of a reaction in equilibrium is increased, the equilibrium would shift in such a way that more reactants are formed so as to annul the effects created by the increase in the concentration of the products. Since reactants are always on the left side of chemical equations, it thus means that the equilibrium would shift to the left.
Nitric acid and nitrogen monoxide react to form nitrogen dioxide and water, like this: At a certain temperature, a chemist finds that a 7.7 L reaction vessel containing a mixture of nitric acid, nitrogen monoxide, nitrogen dioxide, and water at equilibrium has the following composition: compound amount
HNO 16.2 g 11.0 g 18.6 g H20 236.7 g 3 NO NO
Calculate the value of the equilibrium constant K for this reaction. Round your answer to 2 significant digits.
Answer:
K = 3.3
Explanation:
Nitric acid, HNO3, reacts with nitrogen monoxide, NO, to produce nitrogen dioxide, NO2 and water H2O as follows:
2HNO3(g) + NO(g) → 3NO2(g) + H2O(g)
Where equilibrium constant, K, is:
K = [NO2]³[H2O] / [HNO3]²[NO]
[] is the molar concentration of each species at equilibrium.
To solve this question we need to find molarity of each gas and replace these in the equation as follows:
[NO2] -Molar mass NO2-46.0g/mol-
18.6g * (1mol/46.0g) = 0.404mol / 7.7L = 0.0525M
[H2O] -Molar mass:18.01g/mol-
236.7g * (1mol/18.01g) = 13.14 moles / 7.7L = 1.707M
[HNO3] -Molar mass:53.01g/mol-
16.2g * (1mol/53.01g) = 0.3056 moles / 7.7L = 0.0397M
[NO] -Molar mass: 30.0g/mol-
11.0g * (1mol/30.0g) = 0.367 moles / 7.7L = 0.0476M
Replacing:
K = [NO2]³[H2O] / [HNO3]²[NO]
K = [0.0525M]³[1.707M] / [0.0397M]²[0.0476M]
K = 3.3
Hey. what is the difference between a boulder and a rock? ]
And bonus: what did the duck say when she bought lipstick?
Answer:
The difference between a rock and a boulder can be explained in terms of size and detachment. A rock is defined by geologists as an aggregate of minerals. A boulder is a type of rock, specifically a large detached one. All boulders are rocks, but not all rocks are boulders.
What makes it possible
for a vascular plant to
be a long distance from
a water source?
A. long leaves
B. flowers
C. long roots
D. long stems
Answer:
I think long roots
Explanation:
Methane (CH4) is the major component of natural gas. 40.0 grams of methane were placed in a commercial calorimeter and subjected to a combustion reaction. The reaction released 2800 kJ of energy.
1. Compare this energy value to the energy values of paraffin and isopropanol. Is methane a good choice as a fuel?
Based on comparison of energy produced per kilogram, a given mass of methane produces more energy than similar masses of either paraffin or isopropanol, therefore;
Methane is a good choice as a fuel
The reason for the above comparison conclusion is as follows:
The given information:
The details of the combustion of the methane gas, CH₄, are as follows;
The mass of the methane gas placed in the calorimeter, m = 40.0 g
The amount of heat released from the combustion of the 40.0 grams of methane = 2,800 kJ
The data from online resources of paraffin and isopropanol includes
1. The energy value of paraffin = 46 MJ/kg
The energy value of isopropanol = 33.6 MJ/kg
The energy produced from 1 kilogram of methane gas is given as follows;
40.0 g of methane gas produces 2,800 kJ of energy, therefore;
1 kg = 1,000 g of methane gas will produce, 2,800kJ/(40.0 g) × 1,000 g = 70,000,000 J
Therefore;
1 kg of methane produces 70,000,000 J = 70 MJ of energy
Therefore, energy produced from methane = 70 MJ/kg
Given that methane produces more than twice the amount of energy that
is produced from similar mass of isopropanol and more than one and half
times the amount of energy that is produced from the same mass of
paraffin, methane is a good choice as a fuel for energy
Learn more about the calorific value of fuels here:
https://brainly.com/question/24095281
How much heat energy is required to raise the temperature of 50g of bromine from 25°C to 30°C? [Specific heat capacity of bromine = 0.226 J/(g °C]
Answer:
56.5J
Explanation:
To find the heat energy required use the formula for the specific heat capacity which is
c=quantity of heat/mass×change in temperature
in this question c is 0.226j/g,the mass is 50g and the change in temperature is 30-25=5
therefore
0.226=Q/50×5
Q=0.226×250
=56.5J
I hope this helps
