The cavity within a copper [β = 51 × 10-6 (C°)-1] sphere has a volume of 1.180 × 10-3 m3. Into this cavity is placed 1.100 × 10-3 m3 of benzene [β = 1240 × 10-6 (C°)-1]. Both the copper and the benzene have the same temperature. By what amount ΔT should the temperature of the sphere and the benzene within it be increased, so that the liquid just begins to spill out?

The Cavity Within A Copper [ = 51 10-6 (C)-1] Sphere Has A Volume Of 1.180 10-3 M3. Into This Cavity

Answers

Answer 1

Answer:

The answer is "[tex]60.74^{\circ}[/tex]".

Explanation:

Cavity and benzene should be extended in equal quantities.

[tex]\to 1.18 \times 10^{-3}\times (1+ \Delta T \times 0.000051) = 1.1\times 10^{-3} \times (1+ \Delta T \times 0.00124)\\\\\to (\frac{1.18}{1.1})\times (1+ \Delta T \times 0.000051) = 1+ \Delta T \times 0.00124\\\\ \to 1.072\times (1+ \Delta T \times 0.000051) = 1+ \Delta T \times 0.00124\\\\ \to 1.072+ \Delta T \times 0.000054672 = 1+ \Delta T \times 0.00124\\\\ \to 1.072+ \Delta T \times 0.000054672 - 1- \Delta T \times 0.00124=0\\\\[/tex]

[tex]\to 0.072+ \Delta T \times 0.000054672 - \Delta T \times 0.00124=0\\\\ \to 0.072+ \Delta T ( 0.000054672 -0.00124)=0\\\\ \to \Delta T ( 0.000054672 -0.00124)= -0.072\\\\ \to \Delta T = -\frac{0.072}{( 0.000054672 -0.00124)}\\\\ \to \Delta T = -\frac{0.072}{-0.001185328 }\\[/tex]

[tex]\to \Delta T = \frac{0.072}{0.001185328 }\\\\ \to \Delta T = 60.74^{\circ}\\[/tex]


Related Questions

Choose the appropriate explanation how such a low value is possible given Saturn's large mass - 100 times that of Earth.

a. This low value is possible because the magnetic field of Saturn is so strong.
b. This low value is possible because the magnetic field of Saturn is so weak.
c. This low value is possible because the density of Saturn is so high.
d. This low value is possible because the density of Saturn is so low.

Answers

Answer:

Explanation:

That is an amazing fact.

The minus sign is what you have to pay attention to. The earth has a mass of 100 times that of Saturn. As someone on here once noted, Saturn has such a low density that it would float in water.

The answer is D

What is the magnitude of the force between a 25μC charge exerts on a -10μC charge 8.5cm away?

Answers

Answer:

Force,

[tex]F = \frac{kQ_{1} Q_{2} }{ {r}^{2} } \\ F = \frac{(9 \times {10}^{9}) \times (25 \times {10}^{ - 6}) \times (10 \times {10}^{ - 6} ) }{ {(0.85)}^{2} } \\ \\ F = 3.114 \: newtons[/tex]

The magnitude of the force between a 25μC charge exerts on a -10μC charge 8.5cm away would be 311.4 N.

What is Coulomb's Law?

Coulomb's law can be stated as the product of the charges and the square of the distance between them determine the force of attraction or repulsion acting in a straight line between two electric charges.

The math mathematical expression for the coulomb's law given as

F= k Q₁Q₂/r²

where F is the force between two charges

k is the electrostatic constant which is also known as the coulomb constant,it has a value of 9×10⁹

Q₁ and Q₂ are the electric charges

r is the distance between the charges

As given in the problem two charges a 25μC charge exerts on a -10μC charge 8.5cm away

By substituting the respective values in the above formula of Coulomb law

F =9×10⁹×(25×10⁻⁶)×(-10×10⁻⁶)/(8.5×10⁻²)²

F= -311.4 N

A negative sign represents that the force is attractive in nature

Thus, the magnitude of the force is 311.4 N.

Learn more about Coulomb's law from here

https://brainly.com/question/506926

#SPJ2

Help! xoxo thank you

Answers

Like charges repel and opposite charges attract.

Which of the following behaviors would best describe someone who is listening and paying attention? a) Leaning toward the speaker O b) Interrupting the speaker to share their opinion c) Avoiding eye contact d) Asking questions to make sure they understand what's being said

Answers

Answer:

D

Explanation:

Anyone could be leaning forward toward the speaker but be distracted and I believe if you're paying attention to the speaker, you would ask questions to make sure you're understanding what they are speaking

Answer:

A

.............................

Polarized sunglasses:

a. block most sunlight because sunlight is polarized
b. are better but work the same way as non-polarized sunglasses
c. are polarized to filter out certain wavelengths of light
d. block reflected light because reflected light is partially polarized.

Answers

Polarized sunglasses creates filter of vertical openings for light. The light rays will reach the eyes of human vertically only.

The sun rays will not reach human eye directly which will create a shield for sun light burden on human eye.

Polarized sunglasses are best used for blocking and eliminating certain wavelengths of light.

Therefore the correct answer is option C. Polarizes Sunglasses are polarized and it filter out certain wavelengths of light.

Learn more at https://brainly.com/question/24372632

Astronaut Jill leaves Earth in a spaceship and is now traveling at a speed of 0.280c relative to an observer on Earth. When Jill left Earth, the spaceship was equipped with all kinds of scientific instruments, including a meter stick. Now that Jill is underway, how long does she measure the meter stick to be?
A) 0.280 m
B) 1.00 m
C) 0.960 m
D) 1.28 m
E) 1.04 m

Answers

(B) 1.00 m

Explanation:

Since the meter stick is traveling with Jill, it will have the same speed as she does so relative to Jill, the meter stick is stationary so its length remains 1.00 m as measured by her.

When astronaut Jill leaves Earth in a spaceship and is now traveling at a speed of 0.280c and measure the meter stick to be 1 meter. Hence, option B is correct.

What is length contraction?

Length contraction is defined as the phenomenon of the moving object being shorter than its appropriate length, measured in the object's rest frame.

When the object travels with the speed of light, the length of the object gets more contracted than its original length, relative to the observer. It is also known as the Lorentz-Fitgerald contraction.

Length contraction, L = L₀√(1-v²/c²), where L is the original length, L₀ is the contracted length. c² is known as the velocity of light. v² is the velocity of the speed of the object.

From the given,

speed of the spaceship = 0.280c      (c is the speed of the light)

Length contraction, L = L₀ √(1-v²/c²)

The stick also travels in the spaceship. Hence, the length of the meter stick does not change. It remains at its original length of one meter.  Thus, the ideal solution is option B.

To learn more about length contraction:

https://brainly.com/question/10272679

#SPJ2

What is the volume of a metal block 3cm long by 2cm wide by 4cm high? What would be the volume of a block twice as long, wide, and high?

Answers

Answer:

Volume of a metal block = 24 cm^3

Volume of a block twice as long, wide and high = 192 cm^3

Explanation:

Volume of a block is measured in l*w*h and in the first block, the sides are 3, 2 and 4 and 3*2*4 = 24

Second block, just double each of the lengths to get 6*4*8 = 192

The spaceship Enterprise 1 is moving directly away from earth at a velocity that an earth-based observer measures to be 0.66c. A sister ship, Enterprise 2, is ahead of Enterprise 1 and is also moving directly away from earth along the same line. The velocity of Enterprise 2 relative to Enterprise 1 is 0.34c. What is the velocity of Enterprise 2, as measured by the earth-based observer

Answers

Answer:

The answer is "0.82 c".

Explanation:

Given:

Spacecraft speed 1 is [tex]u = + 0.66 \ c[/tex]

Space velocity 2 relative to spacecraft 1 is [tex]v = + 0.34\ c[/tex]

The spacecraft velocity 2 measured by the Earth observation

   [tex]\to u' = \frac{u +v}{1 + ( \frac{uv}{c^2})}[/tex]

            [tex]= \frac{0.66 \ c +0.34\ c}{ 1+ (\frac{0.66\ c \times 0.33\ c }{c^2})}\\\\ = \frac{1 \ c }{ 1+ (\frac{0.2178\ c^2 }{c^2})}\\\\ = \frac{1 \ c }{ 1+ (0.2178 )}\\\\ = \frac{1 \ c }{ 1.2178 }\\\\=0.82\ c[/tex]

Two motors in a factory are running at slightly different rates. One runs at 825.0 rpm and the other at 786.0 rpm. You hear the sound intensity increase and then decrease periodically due to wave interference. How long does it take between successive instances of the sound intensity increasing

Answers

Answer:

[tex]T=1.54s[/tex]

Explanation:

From the question we are told that:

Speed of Motor 1 [tex]\omega_1=825rpm=>2 \pi 13.75[/tex]

Speed of Motor 2 [tex]\omega_1=786rpm=>2 \pi 13.1[/tex]

Therefore

Frequency of Motor 1 [tex]f_1=13.75[/tex]

Frequency of Motor 2  [tex]f_2= 13.1[/tex]

Generally the equation for Time Elapsed is mathematically given by

[tex]T=\frac{1}{df}[/tex]

Where

[tex]df=f_1-f_2[/tex]

[tex]df=13.75-13.1[/tex]

[tex]df=0.65Hz[/tex]

Therefore

[tex]T=\frac{1}{65}[/tex]

[tex]T=1.54s[/tex]

A uniform disk turns at 3.6 rev/s around a frictionless spindle. A non rotating rod, of the same mass as the disk and length equal to the disk's diameter, is dropped onto the freely spinning disk . They then both turn around the spindle with their centers superposed.
What is the angular frequency in rev/s of the combination?
please express answer in proper significant figures and rounding.

Answers

Answer:

ω₁ = 2.2 rev/s

Explanation:

Conservation of angular momentum

moment of inertia uniform disk is ½mR²

moment of inertia uniform rod about an end mL²/3

We can think of our rod as two rods of mass m/2 and length R

L = ½mR²ω₀

L = (½mR² + 2(m/2)R²/3)ω₁

ω₁ = ω₀(½mR² / (½mR² + mR²/3))

ω₁ = ω₀(½  / (½  + 1/3))

ω₁ = 0.6ω₀

ω₁ = 2.16

You are to connect resistors R1 andR2, with R1 >R2, to a battery, first individually, then inseries, and then in parallel. Rank those arrangements according tothe amount of current through the battery, greatest first. (Useonly the symbols > or =, for exampleseries>R1=R2>parallel.)

Answers

Answer:

The current is more in the parallel combination than in the series combination.

Explanation:

two resistances, R1 and R2 are connected to a battery of voltage V.

When they are in series,

R = R1 + R2

In series combination, the current is same in both the resistors, and it is given by Ohm's law.

V = I (R1 + R2)

[tex]I = \frac{V}{R_1 + R_2}[/tex]..... (1)

When they are connected in parallel.

the voltage is same in each resistor.

The effective resistance is R.

[tex]R = \frac{R_1R_2}{R_1 + R_2}[/tex]

So, the current is

[tex]I = \frac{V(R_1+R_2)}{R_1 R_2}[/tex]..... (2)

So, the current is more is the parallel combination.

Calculate the kinetic energy of a mass 2kg moving with a velocity of 0.1m/s

Answers

ANSWER-:

1/2 mv²

K.E = 1/2 mv²

K.E = 0.01 J.

Hence, the kinetic energy of a body is 0.01 Joule.

!! HOPE ITS HELP U !!

1/2mv^2
1/2(2)(0.1)^2
= 0.01 J

Use the values from PRACTICE IT to help you work this exercise. If the current in each wire is doubled, how far apart should the wires be placed if the magnitudes of the gravitational and magnetic forces on the upper wire are to be equal

Answers

Which behavior would best describe someone who has good communication skills with customers ? a) Following up with some customers b) Talking to customers more than listening to them c) Repeating back what the customer says d) Interrupting customers frequently

An electron is released from rest at a distance of 9.00 cm from a fixed proton. How fast will the electron be moving when it is 3.00 cm from the proton

Answers

Answer:

the  speed of the electron at the given position is 106.2 m/s

Explanation:

Given;

initial position of the electron, r = 9 cm = 0.09 m

final position of the electron, r₂ = 3 cm = 0.03 m

let the speed of the electron at the given position = v

The initial potential energy of the electron is calculated as;

[tex]U_i = Fr = \frac{kq^2}{r^2} \times r = \frac{kq^2}{r} \\\\U_i = \frac{(9\times 10^9)(1.602\times 10^{-19})^2}{0.09} \\\\U_i = 2.566 \times 10^{-27} \ J[/tex]

When the electron is 3 cm from the proton, the final potential energy of the electron is calculated as;

[tex]U_f = \frac{kq^2}{r_2} \\\\U_f = [\frac{(9\times 10^9)\times (1.602 \times 10^{-19})^2}{0.03} ]\\\\U_f = 7.669 \times 10^{-27} \ J \\\\\Delta U = U_f -U_i\\\\\Delta U = (7.699\times 10^{-27} \ J ) - (2.566 \times 10^{-27} \ J)\\\\\Delta U = 5.133 \times 10^{-27} \ J[/tex]

Apply the principle of conservation of energy;

ΔK.E = ΔU

[tex]K.E_f -K.E_i = \Delta U\\\\initial \ velocity \ of \ the \ electron = 0\\\\K.E_f - 0 = \Delta U\\\\K.E_f = \Delta U\\\\\frac{1}{2} mv^2 = \Delta U\\\\where;\\\\m \ is \ the \ mass \ of\ the \ electron = 9.1 1 \times 10^{-31} \ kg\\\\v^2 = \frac{ 2 \Delta U}{m} \\\\v = \sqrt{\frac{ 2 \Delta U}{m}} \\\\v = \sqrt{\frac{ 2 (5.133\times 10^{-27})}{9.11\times 10^{-31}}}\\\\v = \sqrt{11268.935} \\\\v = 106.2 \ m/s[/tex]

Therefore, the  speed of the electron at the given position is 106.2 m/s

a. Do the waves made by the two faucets travel faster than the waves made by just one faucet?
b. How do you know this? Describe how the two-faucet wave pattern compares with the one-faucet pattern.
c. Describe what happens to the two-faucet wave pattern as the separation of the faucets is increased.

Answers

Answer:

asdasd dsa dasdasd sadas dasd asdasd asd asd dsa asdd 223 aasd ada dasd sa dasd dsaa sd adsd asasd

Explanation:

answer bhejo please please please​

Answers

Answer:

Various uses of water :

1. Water is used for daily purpose like cooking , bathing , cleaning and drinking.

2. Water used as a universal solvent.

3. water maintains the temperature of our body.

4. Water helps in digestion in our body.

5 .water is used in factories and industries.

6. Water is used to grow plants , vegetables and crops.

Kelsey the triathelete swims 1.5 km east, then bikes 40 km north, and then runs 10 km west. Which choice gives the
correct solution for the resultant?
R2 = 402 – 8,52
R2 = 402 - 102 - 2(40)(1.5) cos 10
R2 = 102 - 40
R2 = 10- - 402 – 2(1.5)(10) cos 40

Answers

Answer:

Hey,. its a simple question. hope you learn from the solution. check attached picture

Explanation:

In part B of the lab, when the current flows through the orange part of the wire from right to left, the wire deflects (or moves) ____. This is in accordance with the right-hand-rule.

Answers

This seems to be incomplete, as we do not have any information about the magnetic field surrounding the wire, but we can answer in a general way.

We know that for a wire of length L, with a current I, and in a magnetic field B, the force can be written as:

F = L*(IxB)

if we define the right as the positive x-axis, and knowing that the current flows to the right, we can write:

I = i*(1, 0, 0)

And the field will be some random vector that can't be parallel to the current because in that case, we do not have any force.

To find the direction of the force, which will tell us the direction in which the wire deflects or moves, first, we need to point with our thumb in the direction of the current, in this case, to the right.

Now, with the hand open, using the tip of our other fingers we point in the direction of the magnetic field.

For example, if the magnetic field is in the positive z-axis, we will point upwards.

Now the palm of our hand tells us in which direction the force is applied.

This is the right-hand rule.

For example, in the case that the current goes to the right and the magnetic field is upwards, we could see that the force is to the front.

A lightning bolt has a current of 56,000 A and lasts for 80 x 10-6 seconds (80 μs). How much charge (in Coulombs) has flowed in this bolt?

Answers

Answer:

A cloud can discharge as much as 20 coulombs in a lightning bolt.

Which was a major effect of Pope Leo III crowning Charlemagne emperor of the Romans ?

Answers

Answer:

The crowning of Charlemagne by Pope Leo III was significant in a number of ways. For Charlemagne, it was necessary because it encouraged to give him higher reliability. It gave him the rank of a dictator, giving him the only ruler in Europe west of the Byzantine emperor in Constantinople.

A block of mass 0.260 kg is placed on top of a light, vertical spring of force constant 5 200 N/m and pushed downward so that the spring is compressed by 0.090 m. After the block is released from rest, it travels upward and then leaves the spring. To what maximum height above the point of release does it rise

Answers

After being released, the restoring force exerted by the spring performs

1/2 (5200 N/m) (0.090 m)² = 12.06 J

of work on the block. At the same time, the block's weight performs

- (0.260 kg) g (0.090 m) ≈ -0.229 J

of work. Then the total work done on the block is about

W ≈ 11.83 J

The block accelerates to a speed v such that, by the work-energy theorem,

W = ∆K   ==>   11.83 J = 1/2 (0.260 kg) v ²   ==>   v ≈ 9.54 m/s

Past the equilibrium point, the spring no longer exerts a force on the block, and the only force acting on it is due to its weight, hence it has a downward acceleration of magnitude g. At its highest point, the block has zero velocity, so that

0² - v ² = -2gy

where y is the maximum height. Solving for y gives

y = v ²/(2g) ≈ 4.64 m

basic source of magnetism is a) charged particles alone b)Movement of charged particles c) Magnetic dipoles d)magnetic domains ​

Answers

Answer:

C . Magnetic dipoles is the correct

Answer:

b). movement of charged particles.

Explanation:

These charges create the nagnetic dipoles.

what are the limitation of clinical thermometer

Answers

Answer:

Their main disadvantage is that they are fairly easy to break and if they do, it results in small splinters of glass and the release of mercury which is quite toxic if absorbed into the body.

A 700N marine in basic training climbs a 10m vertical rope at constant speed in 8sec. what is power put ​

Answers

Answer:

875 Watts

Explanation:

P = W/t = mgh/t = 700(10)/8 = 875 Watts

Why are scientific models important?

Answers

Answer:

Scientific models are representations of objects, systems or events and are used as tools for understanding the natural world. Models use familiar objects to represent unfamiliar things. Models can help scientists communicate their ideas, understand processes, and make predictions.

A bar of steel has the minimum properties Se = 40 kpsi, Sy = 60 kpsi, and Sut = 80 ksi. The bar is subjected to a steady torsional stress of 15 kpsi and an alternating bending stress of 25 ksi. Find the factor of safety guarding against a static failure, and either the factor of safety guarding against a fatigue failure or the expected life of the part. For the fatigue analysis use Modified Goodman criterion.

Answers

Answer:

The correct solution is:

(a) 1.66

(b) 1.05

Explanation:

Given:

Bending stress,

[tex]\sigma_b = 25 \ kpsi[/tex]

Torsional stress,

[tex]\tau= 15 \ kpsi[/tex]

Yield stress of steel bar,

[tex]\delta_y = 60 \ kpsi[/tex]

As we know,

⇒ [tex]\sigma_{max}^' \ = \sqrt{\sigma_b^2 + 3 \gamma^2}[/tex]

        [tex]= \sqrt{(25)^2+3(15)^2}[/tex]

        [tex]=36.055 \ kpsi[/tex]

(a)

The factor of safety against static failure will be:

⇒ [tex]\eta_y = \frac{\delta_y}{\sigma_{max}^'}[/tex]

By putting the values, we get

        [tex]=\frac{60}{36.055}[/tex]

        [tex]=1.66[/tex]

(b)

According to the Goodman line failure,

[tex]\sigma_a = \sigma_b = 25 \ kpsi[/tex]

[tex]S_e = 40 \ kpsi[/tex]

[tex]\sigma_m = \sqrt{3} \tau[/tex]

     [tex]=\sqrt{3}\times 15[/tex]

     [tex]=26 \ kpsi[/tex]

[tex]Sut = 80 \ kpsi[/tex]

⇒ [tex]\frac{\sigma_a}{S_e} +\frac{\sigma_m}{Sut} =\frac{1}{\eta_y}[/tex]

      [tex]\frac{25}{40}+\frac{26}{80}=\frac{1}{\eta_y}[/tex]

              [tex]\eta_y = 1.05[/tex]

Describe how the words Science and optics would appear when viewed in a plane mirror?

Answers

Answer:

Lateral inversion will occur in a plane mirror.

Explanation:

When words are displayed in a plane or flat mirror, the result is that if the words are displayed left, they change to right and if they were normally displayed right, they change to left. This phenomenon is known as lateral inversion. So, this will apply to the words, Science and optics. Only the sides will be interchanged.

A plane mirror reflects light, therefore, the image that is produced by it remains the same size. The image produced will not appear upside down. Only the sides will be interchanged.

We do not use water instead of mercury in a barometer​

Answers

Answer:

Because

1)Water is relatively less dense. Mercury is 13.6 times more dense than water. SO, If you use water, you have to have the length of barometer of length (or height) 13.534 times the length of mercury barometer, which may be more than 11 meter in length.

2)Also mercury as compared to water, has comparatively less specific heat and good conductor of heat, could come to the same temperature of the atmosphere more quickly.

Answer:

The atmospheric pressure at sea level 76 cm of Hg=1.013× 10⁵ pascal .

Explanation:

That is if water is used in barometer tube instead of mercury the length of the tube must be greater than 10.326 cm.so we cannot replace mercury by water in the barometer.

what are the two main types of sound like soundwave​

Answers

Answer:

acoustic energy and mechanical energy

Explanation:

each type of sounds has to be tackled in their own way.

A cylindrical swimming pool has a radius 2m and depth 1.3m .it is completely filled with salt water of specific gravity 1.03.The atmospheric preassure is 1.013 x 10^5 Pa.

a.calculate the density of salt water.

Answers

Answer:

the density of the salt water is 1030 kg/m³

Explanation:

Given;

radius of the cylindrical pool, r = 2 m

depth of the pool, h = 1.3 m

specific gravity of the salt water, γ = 1.03

The atmospheric pressure, P₀ = 1.013 x 10⁵ Pa

Density of fresh water, [tex]\rho _w[/tex] = 1000 kg/m³

The density of the salt water is calculated as;

[tex]Specific \ gravity \ of \ salt\ water \ (\gamma _s_w) = \frac{density \ of \ salt \ water \ (\rho_{sw})}{density \ of \ fresh \ water \ (\rho_{w})} \\\\1.03 = \frac{\rho_{sw}}{1000 \ kg/m^3}\\\\\rho_{sw} = 1.03 \times 1000 \ kg/m^3\\\\\rho_{sw} = 1030 \ kg/m^3[/tex]

Therefore, the density of the salt water is 1030 kg/m³

Other Questions
A garden is rectangular with a width of 8 feet and a length of 10 feet. If it is surrounded by a walkway 2 feet wide, how many square feet of area does the walkway cover? Which confidence level would produce the widest interval when estimating the mean of a population from the mean and standard deviation of a sample of that population? I NEEDVHELP FINDING COORDINATES AGAIN 3 At a particular restaurant, each slider has 225 calories and each chicken wing has 70 calories. A combination meal with sliders and chicken wings has a total of 7 sliders and chicken wings altogether and contains 1110 calories. Write a system of equations that could be used to determine the number of sliders in the combination meal and the number of chicken wings in the combination meal. Define the variables that you use to write the system. The feeling of the nation must be quickened; the conscience of the nation must be roused; the propriety of the nation must be startled; the hypocrisy of the nation must be exposed; and its crimes against God and man must be proclaimed and denounced. How does the repetition of the word "must" affect the tone of the piece? The repetition shows that the speaker is concerned about something. The repetition draws attention to the speakers anger. The repetition suggests that the speaker is intimidating and demanding. The repetition intensifies the speakers sense of urgency. How many squares do u see Changes that Affect the body may take place where For this exponential function,what is the output value (y),when the input value (x) is 3?y = 10.5x.(3, [?]) -1/2 divided by 1/19 How did the Great Society differ from the New Frontier?A. The New Frontier focused more on civil rights legislation, while the Great Society focused on expanding welfare.B. The Great Society focused on foreign policy, while the New Frontier focused on domestic policy.C. The Great Society focused on civil rights and fighting poverty, while the New Frontier focused on technology and space exploration.D. None of these choices are correct. (06.01)A scatter plot is shown:A scatter plot is shown. Data points are located at 1 and 8, 2 and 7.8, 3 and 7.4, 4 and 6.5, 5 and 5.4, 6 and 4.5, 7 and 3.1, 8 and 2, 9 and 1.ASAP:What type of association does the graph show between x and y? Linear positive association Nonlinear positive association Linear negative association Nonlinear negative association an application to your school principal for extra classes of maths and Science. please give correct answer please Elodea is a plant that lives in water. Like all plants, elodea can make its own food throughprocess called photosynthesis. Oxygen gas is also produced during photosynthesis.Photosynthesis can only happen in the presence of light. To measure the rate ofphotosynthesis, a piece of elodea can be placed in an inverted test tube filled with asodium bicarbonate solution. Oxygen gas produced by photosynthesis will collect at thetop of the test tube.A student has designed an experiment using elodea plants. The experimental setup isshown in Figure 1-4Which of the setups would serve as the control of the experiment?BucketLampFlashlight HighNaturalElodeaSodiumbicarbonatesolution Read the excerpt from Take the Tortillas Out of Your Poetry.For me, reading has always been a path toward liberation and fulfillment. To learn to read is to start down the road of liberation, a road which should be accessible to everyone. No one has the right to keep you from reading, and yet that is what is happening in many areas in this country today. There are those who think they know best what we should read. These censors are at work in all areas of our daily lives.To convince readers that censors have unjust motives, the author uses rhetoric to appeal mostly to .a. logic b. charactersc. ethics d. emotion Develop a program that will maintain an ordered linked list of positive whole numbers. Your program will provide for the following options: a. Add a number b. Delete a number c. Search for a number d. Display the whole list of numbers At all times, the program will keep the list ordered (the smallest number first and the largest number last). 9. Find the remainder when the polynomial: p(x) = x + 2x- 3x + x - 1 is divided by (x - 2) pls it's urgent Solve for xAnswer choices:45832 22. Which of the following does not demonstrate evidence regarding the ability to consummate a refinancing of short-term debt? A) Management indicated that they are going to refinance the obligation. B) Actually refinance the obligation. C) Have capacity under existing financing agreements that can be used to refinance the obligation. D) Enter into a financing agreement that clearly permits the entity to refinance the obligation. 3^(2)+4(2)4-9(5+1)+35^(2)+3^(2)-8(3+2)^(2)+4(2+3)8^(2)-9(2)+32(5)^(2)4^(2)+6(2+8)4+5(3)+2(7)-68+3(6)-3^(2)2+6-5+4(6) The base of an aluminum block, which is fixed in place, measures 90 cm by 90 cm, and the height of the block is 60 cm. A force, applied to the upper face and parallel to it, produces a shear strain of 0.0060. The shear modulus of aluminum is . What is the displacement of the upper face in the direction of the applied force