write down the reading shown on the instrument above in units of the instrument

Write Down The Reading Shown On The Instrument Above In Units Of The Instrument

Answers

Answer 1

Answer:

The reading of the vernier calliper is 3.93 mm

Explanation:

The given instrument is a micrometer screw gauge that has a main scale reading and a vernier scale reading

The the question, we have;

The individual divisions of the main scale = 0.5 mm

The reading on the main scale = 3.5 mm

The reading on the vernier scale = 43

The accuracy of the vernier caliper = 0.01

Reading on the vernier scale multiplied by the accuracy of the vernier caliper = 43 × 0.01 = 0.43 mm

The reading of the micrometer screw gauge = The reading on the main scale + Reading on the vernier scale multiplied by the accuracy of the vernier caliper

Therefore, the reading of the micrometer screw gauge = 3.5 + 0.43= 3.93 mm

The reading of the vernier calliper = 3.93 mm.


Related Questions

Systemic circulation requires help from which of the following bones, lungs, arteries and veins, or muscles

Answers

Systemic circulation is between the heart and the rest of the body. Therefore arteries and veins are needed.

Answer:

Artery and viens

Explanation:

A 5000 pound car sitting in the last parking space in the block a scalar or vector quantity??

Answers

Answer:

scalar

Explanation:

pounds is a unit of mass, and mass is a scalar quantity.

if it was weight (in newtons) it would be a vector.

A 5000-pound car sitting in the last parking space in the block is a scalar quantity, not a vector quantity.

What are scaler quantity and vector quantity?

The scaler quantity is only the quantity having some amount of magnitude but not direction and vector quantity is that which consists of both magnitude and the direction with them.

In 5000 pound car sitting in the last parking space in the block, it has a magnitude of 5000 pounds but does not have any direction to move and it comes under the scalar quantity.

Therefore, a car has scalar quantity not vector if, a 5000-pound car sitting in the last parking space in the block.

Learn more about scaler quantity and vector quantity, here:

https://brainly.com/question/774036

#SPJ2

A disk-shaped dough is initially spinning at 2 rotations per second (1 rotation = 360°). As time goes on, it slowly deforms, and is now spinning at a different angular speed. The dough changed radius from 16 cm to 17 cm, and its mass remained constant throughout. What is its final angular speed in degrees/s?

Answers

Answer:

10.44° per sec

Explanation:

Initial angular speed N = 2 rotations per minute

converting to rad/s ω = 2πN/60 = (2 x 3.142 x 2)/60 = 0.21 rad/s

the initial radius of the disk = 16 cm = 0.16 m

final radius = 17 cm = 0.17 m

Angular momentum = [tex]I[/tex]ω

where [tex]I[/tex] = rotational inertia = mass x [tex]radius^{2}[/tex]

ω = angular speed

For the initial case

[tex]I[/tex] = m x [tex]0.16^{2}[/tex] = 0.0256m

Angular momentum = 0.0256m x 0.21 = 0.0054m

For second case

[tex]I[/tex] = m x [tex]0.17^{2}[/tex] = 0.0289m

Angular momentum = 0.0289m x ω = 0.0289mω

For conservation of rotational momentum, initial angular momentum must be equal to the final angular momentum

0.0054m = 0.0289mω

m cancels out, we have

0.0054 = 0.0289ω

ω = 0.187 rad/s

converting back to rpm, we have

N = 0.187/2π = 0.029 rotations per sec

0.029 x 360 = 10.44° per sec

A 50.5-turn circular coil of radius 4.75 cm can be oriented in any direction in a uniform magnetic field having a magnitude of 0.455 T. If the coil carries a current of 22.5 mA, find the magnitude of the maximum possible torque exerted on the coil.

Answers

Answer:

The maximum torque, τ = 3.67 × 10⁻³ Nm

Explanation:

The torque τ = NiABsinθ where N = number of turns of circular coil = 50.5, i = current in circular coil = 22.5 mA = 0.0225 A, A = area of circular coil = πr² where r = radius of circular coil = 4.75 cm = 0.0475 m, B = magnetic field strength = 0.455 T and θ = 90° for maximum torque.

So, τ = NiABsinθ

τ = Niπr²Bsinθ

τ = 50.5 × 0.0225 A × π × (0.0475 m)² × 0.455 T × sin90°

τ = 0.003665 Nm

τ = 3.665 × 10⁻³ Nm

τ ≅ 3.67 × 10⁻³ Nm

So the maximum torque, τ = 3.67 × 10⁻³ Nm

Look at the diagram below. The value of equivalent resistor is: A. 4 Ω B. 6 Ω C. 8 Ω D. 10 Ω

Answers

Answer:

R=4Ω

Explanation:

R1 and R3 are parrallel

so we have : R=R1*R2/R1+R2

R=6*3/6+3

R=18/9

R=2Ω

R2 and 2Ω are in series,so we have

R=R2+2

R=2+2

R=4Ω

An electric field from a charge has a magnitude of 4.5 x 10^4 N/C at a certain
location that points outward. If another charge with a magnitude of -2.0 x 10^-6 C
is brought near it, what is the strength of the electrostatic force that acts on this
charge and how do the two charges behave?
0.09 N; repel each other
-0.09 N; attract each other
-2.3 N; repel each other
2.3 N; attract each other

Answers

Answer:

4.5 x 10^4 x -2 x 10^-6 = -0.09N

Explanation:

-0.09N

How do FITT principles help you on your sports related activity

Answers

Answer:

F.I.T.T. stands for frequency, intensity, time and type. These four key aspects of your workout program will help you achieve your athletic goal, whether it's to increase your endurance, strength or speed. Here is an in-depth look at what each means and how to modify it to make athletic gains on the field...

Which statement accurately describes electronic tools? Check all that apply

Answers

Electronic tools provide more accurate data and this data is more efficient,fast and easy to understand

Answer:

Electronic tools provide more accurate data and this data is more efficient fast and easy to understand

Hope this helps you!!

A round steel plate with a diameter of 20 cm is supplied with heat in such a way that its temperature changes from 22 ° C to 150 ° C. How much does its area increase?

Answers

Answer:

1.05×10⁻⁴ m²

Explanation:

ΔA = 2 A₀ α ΔT,

where ΔA is the change in area,

A₀ is the initial area,

α is the linear expansion coefficient,

and ΔT is the change in temperature.

A₀ = π (0.20 m / 2)² = 0.0314 m².

For steel, α = 13×10⁻⁶ /°C.

ΔT = 150°C − 22°C = 128°C.

ΔA = 2 (0.0314 m²) (13×10⁻⁶ /°C) (128°C)

ΔA = 1.05×10⁻⁴ m²

FASTTT I BEG U An astronaut weighs 900 N on earth. On the moon he weighs 150 N. Calculate the moons’ gravitational strength. (Take g = 10 N/kg).

Answers

mass of an object is always constant

weight is a force, [tex]W=mg[/tex] where $g$ is acceleration due to gravity.

Weight on earth is , $900=m\cdot 10 \implies m=90$ kg

weight on moon is $150=90\times g_{\text{moon}} \implies g=\frac{5}{3}$

An object is to be dropped from an aeroplane so as to hit a target on the ground. If the aeroplane is travelling horizontally at 80m/s at a height of 2000m, calculate the position of the aeroplane when the object is released​

Answers

Answer:

you live it will be around 23 to 82% angle

Explanation:

just think about yourself going in the high-speed and then jumping and then just think of all know that person just jumping without being going to high speed

1
A force 2ON acts at a distance of 2n from a pivot.
what is the moment
force about the pivot

Answers

Answer:

[tex]\large \boxed{\mathrm{40 \ Nm}}[/tex]

Explanation:

[tex]\sf Moment \ (Nm) = Force \ (N) \times Distance \ from \ pivot \ (m)[/tex]

[tex]M=20 \times 2[/tex]

[tex]M=40[/tex]

Select the correct answer. Ben has $10 to spend on dinner. He can have a pizza delivered, drive to a burger place, or go to the grocery store to get ingredients for a fresh salad. In the end, he goes with the salad. If each meal would have cost him the same amount, what is Ben’s incentive for choosing salad? A. to eat a healthier meal B. to help the local economy C. to save gas D. to save on his telephone bill

Answers

Answer:

A. to eat a healthier meal

Explanation:

The answer would be A, to eat a healthier meal. Eating a serving of mixed greens can enable Ben to shed pounds in the event that it encourages you to diminish your aggregate calorie admission. Pick filling fixings with the goal that you are not as ravenous and eat less, and keep your plates of mixed greens low in calories so they give fewer calories than the feast or tidbit that they are supplanting.

When the hydraulic conductivity Ks = 10 mm/hr; effective matrix potential Ns = 20 mm, and rainfall intensity I = 30 mm/hr , determine the amount of runoff generated when the runoff rate reaches 15 mm/hr?( 2.7 mm or 0.21 mm or 18 mm or 0.67 mm)

Answers

Answer:

[tex]t = 0.75 \ hr = 0.75 *60 = 45 \ minutes[/tex]

Explanation:

From the question we are told that

   The  hydraulic conductivity is  [tex]Ks = 10\ mm/hr[/tex]

    The  effective matrix potential [tex]Ns = 20 \ mm[/tex]

    The  intensity of  rainfall is  [tex]I = 30 \ mm/hr[/tex]

    The runoff rate [tex]R = 15 \ mm/hr[/tex]

Generally the run off rate is mathematically represented as  

      [tex]R = (I - Ks) t[/tex]

Here t is the amount of runoff generated

=>   [tex]15 = (30 - 10) t[/tex]

=>  [tex]t = 0.75 \ hr[/tex]

converting to minutes

    [tex]t = 0.75 \ hr = 0.75 *60 = 45 \ minutes[/tex]

Calculate the average kinetic energy of molecules of a gas at a temperature of 18 ° C

Answers

Answer:

6.0×10⁻²¹ J

Explanation:

KE = 3/2 kT,

where KE is average kinetic energy per molecule,

k is the Boltzmann constant,

and T is absolute temperature.

KE = 3/2 (1.38×10⁻²³ J/K) (18 + 273.15) K

KE = 6.0×10⁻²¹ J

Answer:

The answer is 6.0×10⁻²¹ J , because KE = 3/2 kT,  where KE is average kinetic energy per molecule,  k is the Boltzmann constant,  and T is the absolute temperature.

KE = 3/2 (1.38×10⁻²³ J/K) (18 + 273.15) K

KE = 6.0×10⁻²¹ J

The quantum state of a particle can be specified by giving a complete set of quantum numbers (n,l, ml,ms). How many different quantum states are possible if the principal quantum number is n=3?

Answers

Explanation:

We need to find the quantum state of a particle can be specified by giving a complete set of quantum numbers (n,l, ml,ms).

We have the principal quantum number, n = 3

The value of l = n-1

l = 0,1,2,3

The value of [tex]m_l[/tex]

[tex]m_l=-l\ \text{to}\ +l\\\\m_l=-3,-2,-1,0,1,2,3[/tex]

The value of [tex]m_s[/tex]

[tex]m_s=\dfrac{-1}{2},\dfrac{+1}{2}[/tex]

Hence, this is the required solution.

Dennis throws a volleyball up in the air. It reaches its maximum height 1.1\, \text s1.1s1, point, 1, start text, s, end text later. We can ignore air resistance. What was the volleyball's velocity at the moment it was tossed into the air?

Answers

Answer:

If max height = 1.1 meters, then initial velocity is 3.28 m/s

If max height is 1.1 feet, then the initial velocity is 5.93  ft/s

Explanation:

Recall the formulas for vertical motion under the acceleration of gravity;

for the vertical velocity of the object we have

[tex]v=v_0-g \,t[/tex]

for the object's vertical displacement we have

[tex]y-y_0=v_0\,t - \frac{g}{2} \,t^2[/tex]

If the maximum height reached by the object is given in meters, we use the value for g in [tex]m/s^2[/tex] which is: [tex]9.8\,\,m/s^2[/tex]

If the maximum height of the object is given in feet, we use the value for g in  [tex]ft/s^2[/tex]  which is : [tex]32\,\,ft/s^2[/tex]

Now, when the ball reaches its maximum height, the ball's velocity is zero, so that allows us to solve for the time (t) the process of reaching the max height takes:

[tex]v=v_0-g \,t\\0=v_0-g \,t\\g\,\,t=v_0\\t=\frac{v_0}{g}[/tex]

and now we use this to express the maximum height in the second equation we typed:

[tex]y-y_0=v_0\,t - \frac{g}{2} \,t^2\\max\,height=v_0\,(\frac{v_0}{g}) - \frac{g}{2} \,(\frac{v_0}{g})^2\\max\,height= \frac{v_0^2}{2\,g}[/tex]

Then if the max height is 1.1 meters, we use the following formula to solve for [tex]v_0[/tex]:

[tex]1.1= \frac{v_0^2}{2\,9.8}\\(9.8)\,(1.1)=v_0^2\\v_0=10.78\\v_0=\sqrt{10.78} \\v_0=3.28\,\,m/s[/tex]

If the max height is 1.1 feet, we use the following formula to solve for [tex]v_0[/tex]:

[tex]1.1= \frac{v_0^2}{2\,32}\\(32)\,(1.1)=v_0^2\\v_0=35.2\\v_0=\sqrt{35.2} \\v_0=5.93\,\,ft/s[/tex]

Answer:

11

Explanation:

for khan academy, this is the answer

A car accelerate uniformly from rest at 5m/s2 . Determine it's speed after 10s​

Answers

Answer:

50m/s.

Explanation:

Let's take acceleration as A and speed as S:

A = 5m/s²

S = A × 10s = 5 × 10 = 50m/s

The answer is 50m/s.

Answer:

50m/s

Explanation:

Given:

a=5m/s^2

t=10s

Required:

v=?

Formula:

a=v/t

Solution:

a=v/t

v=a*t

v=5m/s^2*10s

v=50m/s

Hope this helps ;)❤❤❤

Find the odd one out a)Planets moving on it's axis,Strings of guitar (being played),Motion of a ferry wheel,The vehicles moving on a straight road. b)Motion of the moon around the earth,Motion of the earth around the sun,Motion of a merry-go-round,Heart-beat in a healthy person. c)Motion of a bullet fired from gun,Motion of a football player in the ground,Motion of a vehicle on a straight road,Motion of an apple falling from a tree

Answers

Answer:

a) Strings of guitar (being played)

b) Heart-beat in a healthy person

c) Motion of an apple falling from a tree

Explanation:

a) The motion of the string of a guitar being played is the only motion involving simple harmonic motion.

b) All the other motions are circular motion except the heart beat in a healthy person, which is periodic.

c) The motion of an apply falling from a tree is the only motion under the complete influence of gravity from the onset till the end.

solve for x, x=2.7(35)+1/2(-9.7)*35^2 ​

Answers

The answer is:

-5846.75

A cat stalks an unsuspecting mouse. The movement of the cat is shown in the following graph of the horizontal position, x, against time, t. What is the average speed of the cat between t = 2s and t = 6s?

Answers

Answer:

0.25 m/s

Explanation:

Average velocity = change in displacement / change in time

v = (1.5 m − 2.5 m) / (6 s − 2 s)

v = -0.25 m/s

The average speed is 0.25 m/s.

Answer:

0.25 m/s

Explanation:

khan academy

You put a piece of ice into a glass of lemonade at room temperature. Which statements explains the heat flow in this scenario? A. Heat flows in both directions. B. Heat flows from the ice to the lemonade. C. Heat flows from the lemonade to the ice. D. Heat flows from the ice to the lemonade to the glass.

Answers

Answer:

C. Heat flows from lemonade to the ice

Explanation:

Transfer of heat from the drink to the ice is what melts the ice and cools the drink.

what is the meaning of stroke​

Answers

Answer:

Stroke has two emissions it could either be the meaning of lightly passing over something with the sense of touch for example stroking a dog/cat

And the medical term stroke where either a person has lost facial features of can't lift their arms up and keep them up or speak properly and their speech would be slurred

Hope this helps

If anything didn't meet your question please comment what you are looking for and I may change my answer thank you :)

Explanation:

How many minutes does it take for light to go from the sun to the planet Uranus, a distance of 2.88x109 km? (The
velocity of light is constant in free space and is 3.00x108 m/s)

Answers

Answer:

t = 160 minutes

Explanation:

Given that,

Distance of Uranus from Sun is [tex]2.88\times 10^9\ km[/tex]

We need to find the time taken by the light to go from sun to Uranus if the velocity of light is constant in free space and it is equal to c.

So,

[tex]t=\dfrac{d}{v}\\\\t=\dfrac{2.88\times 10^9\times 10^3\ m}{3\times 10^8}\\\\t=9600\ s[/tex]

Since, 1 minute = 60 seconds

t = 160 minutes

So, 160 minutes is taken by the light.

While driving on a highway, your HMMWV starts to pull to one side. You stop and check your tires – one tire is going flat. There is no spare, but the affected tire has a runflat device installed, and you are only 5 miles from the motor pool. What is your maximum allowable speed when driving with one flat tire?

Answers

Answer:

30 miles people hour (mph)

Explanation:

The maximum speed for one flat tyre is 30mph, for both tyres it is 20 mph and for two tyres on the same side it is 30mph. When a tyre is punctured driving at high speed should be avoided and not too long distance should be covered to avoid further accident and for the safety of other vehicles. Speed limit and distance for flat tires should be strictly followed.

A particle moves in a plane according to X=Rsinwt + wRt Y=Rcoswt+R where w and R constant this curved called cycloid path traced out by a point on rim of wheel that slipping with x-axis sketch the path calculate intantaneous velocity and acceleration when particle is its axis maximun and minimun value of Y

Answers

Answer:

maximum  point  y= 2R

 vₓ = wR ,  v_{y} = 0, aₓ = 0,  a{y} = - Rw²

minimum point   y=R

vₓ = wR , v_{y} = - R w,  aₓ = - R w²,  a_{y} = 0

Explanation:

The definition of velocity is

        v = dr / dt

        vₓ = dx / dt

        [tex]v_{y}[/tex] = dy / dt

        vₓ = Rw cos wt + wR

        v_{y} = -Rw sin wt

acceleration is defined by

         a = dv / dt

         aₓ = -Rw² sin wt

         a_{y} = - R w² cos wt

these are the general expressions for velocity and acceleration, to find the explicit values ​​for the maximum and minimum y points, let's find these points and substitute

maximum  point

         y = R cos wt + R

the heat is maximum when the cosine is worth 1

         y_max = 2R

at this point the speed is

         vₓ = wR

         v_{y} = 0

the acceleration is

         aₓ = 0

         a_{y} = - Rw²

minimum point

        this occurs when the cosine is zero

        y = R

speed is

       vₓ = wR

       v_{y} = - R w

acceleration is

        aₓ = - R w²

        a_{y} = 0

which of the following best describes the kinetic theory model?

a. all particles in matter eventually stop moving

b. energy changes have no effect on the state of matter

c. when particles in matter gain or lose energy , they change state

d. no matter how much energy is present particles never move

Answers

Answer:

Answer c: "when particles in matter gain or lose energy , they change state"

Explanation:

As energy is provided to the molecules of the substance in question, they acquire more speed or vibration, increasing their separation in the substance, which can become then a liquid , or a gas. The reverse path also happens as the particles give away energy.

Answer:

c. when particles in matter gain or lose energy , they change state

we know that for example, if you add heat (energy) to ice it would melt (change state) or if you freeze water (change state) it would become ice.

d. Write the symbol for the nucleus that completes each nuclear equation. (1 point each)

Answers

Answer:

Ra, 88

Ru, 44

Cr, 24

Explanation:

i

the remaining mass number is 224(228 - 4), and it's atomic number is 88(90 - 2). The element is Radium, Ra

ii

the remaining mass number is 98(98 - 0), and it's atomic number is 44(45 - 1). The element is Ruthenium, Ru

iii

The remaining mass number is 52(52 - 0), and it's atomic number is 24(23 - -1). The element is Chromium, Cr

The model of the atom has changed as scientists have gathered new evidence. Four models of the atom are shown below, but one important model is missing. An image at left with overlapping red and blue balls in the center with a circular fuzzy green cloud outside them. An image at center left with a purple ball in the center surrounded by overlapping concentric black ovals, each with a small green ball on each of the 6 ovals. An image at center right with a large black cross in a purple circle with a black line around the purple, with 10 small green balls dispersed within the purple circle. An image at right with a purple center outlined in black with two concentric black circles around the center, the inner circle having 2 small green balls on it and the outer circle having 8 small green balls on it. Which atomic model is missing from this set? Bohr’s model Dalton’s model Rutherford’s model Thomson’s model

Answers

Answer:

Thomson’s model

Explanation:

Thompson regarded the atom largely as a sphere of positively charged matter in which negative charges were embedded.

This came to be known as the plum pudding model of the atom because it resembles a pudding studded with currants.

This was an early model of the atom and did not survive further experimental scrutiny of the structure of the atom.

Answer:

Thompsons model

Explanation:

i got it right on the quiz

Six members of a synchronized swim team wear earplugs to protect themselves against water pressure at depths, but they can still hear the music and perform the combinations in the water perfectly. One day, they were asked to leave the pool so the dive team could practice a few dives, and they tried to practice on a mat, but seemed to have a lot more difficulty. Why might this be

Answers

Answer:

The sound travels differently in different medium according the density of the medium.

Explanation:

The sound travels faster in dense medium and can be heard by the vibration of the bone present in the ear. The ear plugs reduce the sound intensity in both medium water and on land (air).

In air the sound is not heard properly due to the earplugs that stops the as the vibration are not able to produce as sound is not able to reach to middle ear, but Navy researchers have discovered that sound under water is heard by the bone present behind the ear, vibrations mastoid.

Other Questions
In ancient Greece, the marketplace in the center of a city-state was referred to as____ . a. the acropolis c. the agora b. the Minoan d. Knossos A mail-order house uses 18,000 boxes a year. Carrying costs are 60 cents per box a year, and ordering costs are $96. The following price schedule applies. Determine: A. The optimal order quantity. B. The number of orders per year. of boxes: 1,000-1,999 Price per box: $1.25 of boxes: 2,000- 4,999 Price per box: $1.20 of boxes: 5,000- 9,999 Price per box : $1.15 of boxes: 10,000 or more Price per box : $1.10 New Faces, New Places: Mastery TestSelect the correct answer.Which personality trait best fits the description?Lupe estudia mucho y toma cursos avanzados en matemticas y literatura.A.timida.amableCestudiosa Which of the following equations have infinitely many solutions?Choose all answers that apply:A10x- 10 = -10x + 10B- 10x - 10 = -10x + 10C-10x 10 = -10x - 10D10x - 10 = -10x 10 Which of the following is TRUE? Group of answer choices Flexibility in structure is more important than stability. Strategy has a more important influence on structure than structure has on strategy. Large organizations can retain a simple structure as long as they have a focus strategy. Organizations tend to change structure too frequently, which erodes their competitive advantage. describe the characteristics of a physiologist PLEASEEEEEEEE HELPPPPPPPPP MEEEEEEEEEE If A = C + 3A=C+3, B = 2CB=2C, and C = 4C=4, which is the correct order from least to greatest? what color would you get if you mixed red and yellow Based on experience, the Ball Corporations aluminum can manufacturing facility in Ft. Atkinson, Wisconsin, knows that the metal thickness of incoming shipments has a mean of 0.2771 mm with a standard deviation of 0.000855 mm.(a) A certain shipment has a diameter of 0.2742. Find the standardized z-score for this shipment. (Round your answer to 3 decimal places.)z (b) Is this an outlier?YesNo why is gravitational force between two object usually unnoticeable The correct sequence for western blotting is: 1. Proteins are denatured by sodium dodecyl sulfate (SDS), and by boiling. 2.Transfer proteins to the nitrocellulose membrane. 3. Performing the polyacrylamide gel electrophoresis (PAGE). 4. Incubate the nitrocellulose membrane to primary antibodies and secondary antibodies subsequently.a. 1,2,3,4 b. 4,1,3,2 c. 1,3,2,4 d. 1,3,2,4 Do men and women run a 5 kilometer race at the same pace? Here are boxplots of the time (in minutes) for a race recently run in Chicago. Write a brief report discussing what these data show. At what rate must Uranium 235 undergo fission by neutron bombardment to generate energy at a rate of 100 W (1 W Enter the coordinates of the pointon the unit circle at the given angle.60 Closing prices of two stocks are recorded for 50 trading days. The sample standard deviation of stock X is 4.665 and the sample standard deviation of stock Y is 8.427. The sample covariance is $35.826.Calculate the sample correlation coefficient. (Round your answer to 4 decimal places.) Anne can make 6 headbands from 3/5 meters of cloth. Which expression shows the amount of cloth needed to make 1 headband? What is the solution to the expression? The expression that shows the amount of cloth needed to make 1 headband is . The solution to the expression is meters. The term to term rule of a sequence is "multiply by 3 and add 1". The third term is 13. Work out the first term of the sequence. A city council consists of seven Democrats and six Republicans. If a committee of five people is selected, find the probability of selecting two Democrats and three Republicans. a object 1.5cm high produces a real image 2cm high. placed at a distance of 20cm from a concave mirror calculate: [a] the position of the image [b] focal lenght of the concave mirror