Write a program using a dictionary that reads in a single positive digit number [0 - 9] from the user at the keyboard. Your program will then be able to look up the digit key in the dictionary and print the digit value spelled out. If the user types in a number that is either more than one digit, negative, or a non int value, re-prompt the user for valid input. First, before demonstrating your test cases, print out a display copy of the key:value pairs in your dictionary in sorted order. Deliverable: yournameLab4.py Your source code solution and a copy of the run pasted into your source submission file. Be sure to comment out your run so that your .py file will still run in the grader test bed. Validate user input is a single positive digit [0 - 9].
Answers
Answer:
The program in Python is as follows:
dict = {0:"Zero",1:"One",2:"Two",3:"Three",4:"Four",5:"Five",6:"Six",7:"Seven",8:"Eight",9:"Nine"}
num = input("Number: ")
while(num.isdigit() == False or int(num)<0 or int(num)>9):
num = input("Number: ")
print(dict)
print(dict[int(num)])
Explanation:
#This initializes the dictionary
dict = {0:"Zero",1:"One",2:"Two",3:"Three",4:"Four",5:"Five",6:"Six",7:"Seven",8:"Eight",9:"Nine"}
#This gets input from the user
num = input("Number: ")
#This loop is repeated until the user enters a valid input
while(num.isdigit() == False or int(num)<0 or int(num)>9):
num = input("Number: ")
#This prints the dictionary
print(dict)
#This prints the value of the key
print(dict[int(num)])
See attachment for sample run
![Write A Program Using A Dictionary That Reads In A Single Positive Digit Number [0 - 9] From The User](https://brainimage.s3.us-east-005.backblazeb2.com/answers/attachments/kQakVDPnMXXk2fNrsKlPojYzwYnLTkbp.png)
Related Questions
Help Pls
I need about 5 advantages of E-learning
Answers
Answer:
Explanation:
E-learning saves time and money. With online learning, your learners can access content anywhere and anytime. ...
E-learning leads to better retention. ...
E-learning is consistent. ...
E-learning is scalable. ...
E-learning offers personalization.
Answer:
E- learning saves time and money
E-learning makes work easier and faster
E- learning is convenient
E- learning is consistent
E- learning is scalable
Explanation:
when you learn using the internet, you save a lot of time by just typing and not searching through books
How to use the AI System ?
Answers
ANSWER:
· New artificial intelligence systems are being developed to help teachers administer more effective testing that could uncover some of these often-hidden conditions. Once they can be properly identified, educators can tap into the resources available for a learning disability. Students can use AI to give reliable feedback.
The advantage of returning a structure type from a function when compared to returning a fundamental type is that a. the function can return multiple values b. the function can return an object c. the function doesn’t need to include a return statement d. all of the above e. a and b only
Answers
Answer:
The advantage of returning a structure type from a function when compared to returning a fundamental type is that
e. a and b only.
Explanation:
One advantage of returning a structure type from a function vis-a-vis returning a fundamental type is that the function can return multiple values. The second advantage is that the function can return can an object. This implies that a function in a structure type can be passed from one function to another.
Compute the acceleration of gravity for a given distance from the earth's center, distCenter, assigning the result to accelGravity. The expression for the acceleration of gravity is: (G * M) / (d2), where G is the gravitational constant 6.673 x 10-11, M is the mass of the earth 5.98 x 1024 (in kg) and d is the distance in meters from the earth's center (stored in variable distCenter).
#include
using namespace std;
int main() {
double G = 6.673e-11;
double M = 5.98e24;
double accelGravity;
double distCenter;
cin >> distCenter;
/* Your solution goes here */
cout << accelGravity << endl;
return 0;
}
Answers
Answer:
Replace /* Your solution goes here */ with the following expression
accelGravity = (G * M) / (distCenter *distCenter );
Explanation:
Required
Complete the code
The equivalent expression of (G * M) / (d^2) is:
(G * M) / (distCenter *distCenter );
The expression must be stored in accelGravity.
So, we have:
accelGravity = (G * M) / (distCenter *distCenter );
e) Point out the errors( if any) and correct them:-
class simple
{
inta,b,c;
double sumNumber
{
int d = a + b + c;
double e = d/5.6;
return e;
}
void show Number()
{
a = 10, b = 20, c=5;
System.out.println(d);
double f = sumNumber(a,b,c);
System.out.print(e);
}
}
Answers
Explanation:
double e-d/5.6;is wrong it should return to c
T
N
O
?
You can insert only the row
only to
True or false
Answers
false
Explanation:
good luck bro
have a great day
Answer:
false
Explanation:
Fasilitas untuk pengaturan batas kertas pada Microsoft Word adalah….
a. Margin
b. View
c. LayOut
d. Paragraph
Office 92 sering disebut juga dengan….
a. Office 3.0
b. Office 7.0
c. Office Xp
d. Office 2.0
Answers
Fasilitas untuk pengaturan batas kertas pada Microsoft Word adalah
B.View
Office 92 sering disebut juga dengan
A.Office 3.0
The Janitorial and Cafeteria departments are support departments. Samoa uses the sequential method to allocate support department costs, first allocating the costs from the Janitorial Department to the Cafeteria, Cutting, and Assembly departments. Determine the proportional (percentage) usage of the Janitorial Department by the:
Answers
Complete Question:
Departmental information for the four departments at Samoa Industries is provided below. Total Cost Cost Driver Square Feet Number of employees Janitorial $150,000 square footage serviced 200 Cafeteria 50,000 Number of employees 20,000 Cutting 1,125,000 4,000 120 Assembly 1,100,000 16,000 The Janitorial and Cafeteria departments are support departments Samoa uses the sequential method to allocate support department costs, first allocating the costs Department to the Cafeteria, Cutting and Assembly departments Determine the proportional (percentage) usage of the Janitorial Department by the a. Cafeteria Department b. Cutting Department c. Assembly Department
Answer:
Samoa Industries
Proportional (percentage) usage of the Janitorial Department:
Cafeteria = 50%
Cutting = 10%
Assembly = 40%
Explanation:
a) Data and Calculations:
Total Cost Cost Driver Square Feet Number of
employees
Janitorial $150,000 Square footage serviced 200 40
Cafeteria 50,000 Number of employees 20,000 12
Cutting 1,125,000 4,000 120
Assembly 1,100,000 16,000 40
Proportional (percentage) usage of the Janitorial Department:
Cafeteria = 50% (20,000/40,000 * 100)
Cutting = 10% (4,000/40,000 * 100)
Assembly = 40% (16,000/40,000 * 100)
Cost Allocation of the Janitorial Department:
Cafeteria = 50% * $150,000 = $75,000
Cutting = 10% * $150,000 = 15,000
Assembly = 40,% * $150,000 = 60,000
Total = $150,000
An engineer is configuring AMP for endpoints and wants to block certain files from executing. Which outbreak control method is used to accomplish this task
Answers
Question Completion with Options:
A. device flow correlation
B. simple detections
C. application blocking list
D. advanced custom detections
Answer:
The outbreak control method that is used to accomplish the task of configuring AMP for endpoints and to block certain files from executing is:
C. application blocking list
Explanation:
The application blocking list creates a list of application files, which the AMP continuously tracks and analyzes to compare the file activities with previous cyber attacks. Specifically, the AMP for Endpoints is a cloud-managed endpoint security solution, which provides a retrospective alert to prevent cyber-security threats, and rapidly detects, contains, and remediates malicious files on the endpoints.
continuously tracks and analyzes files and file activities across your systems, and compares these events to what preceded or happened in past attacks. If a file exhibits malicious behavior, the AMP provides you with a retrospective alert which enables you to stop a potential threat from succeeding.
Write a program that randomly chooses among three different colors for displaying text on the screen. Use a loop to display 20 lines of text, each with a randomly chosen color. The probabilities for each color are to be as follows: white 30%, blue 10%, green 60%. Suggestion: Generate a random integer between 0 and 9. If the resulting integer falls in the range 0 to 2 (inclusive), choose white. If the integer equals to 3, choose blue. If the integer falls in the range 4 to 9 (inclusive), choose green. Test your program by running it ten times, each time observing whether the distribution of line colors appears to match the required probabilities.
Answers
INCLUDE Irvine32.inc
.data
msgIntro byte "This is Your Name's fourth assembly extra credit program. Will randomly",0dh,0ah
byte "choose between three different colors for displaying twenty lines of text,",0dh,0ah
byte "each with a randomly chosen color. The color probabilities are as follows:",0dh,0ah
byte "White=30%,Blue=10%,Green=60%.",0dh,0ah,0
msgOutput byte "Text printed with one of 3 randomly chosen colors",0
.code
main PROC
;
//Intro Message
mov edx,OFFSET msgIntro ;intro message into edx
call WriteString ;display msgIntro
call Crlf ;endl
call WaitMsg ;pause message
call Clrscr ;clear screen
call Randomize ;seed the random number generator
mov edx, OFFSET msgOutput;line of text
mov ecx, 20 ;counter (lines of text)
L1:;//(Loop - Display Text 20 Times)
call setRanColor ;calls random color procedure
call SetTextColor ;calls the SetTextColor from library
call WriteString ;display line of text
call Crlf ;endl
loop L1
exit
main ENDP
;--
setRanColor PROC
;
; Selects a color with the following probabilities:
; White = 30%, Blue = 10%, Green = 60%.
; Receives: nothing
; Returns: EAX = color chosen
;--
mov eax, 10 ;range of random numbers (0-9)
call RandomRange ;EAX = Random Number
.IF eax >= 4 ;if number is 4-9 (60%)
mov eax, green ;set text green
.ELSEIF eax == 3 ;if number is 3 (10%)
mov eax, blue ;set text blue
.ELSE ;number is 0-2 (30%)
mov eax, white ;set text white
.ENDIF ;end statement
ret
setRanColor ENDP
tinh S(n) = 1+2+3+.....+n
Answers
Answer:
-1/12
Explanation:
[tex]\sum_{k=0}^{k=n} k = \frac{n(n+1)}{2}\\[/tex]
look up the derivation by Srinivasa Ramanujan for a formal proof.
If every company is now a technology company, then what does this mean for every student attending a business college
Answers
Answer:
Explanation:
There are all sorts of possibilities for, say, inserting new technologies into existing processes. But most of these improvements are incremental. They are worth doing; in fact, they may be necessary for survival. No self-respecting airline, for instance, could do without an application that lets you download your boarding pass to your mobile telephone. It saves paper, can't get lost and customers want it.
But while it's essential to offer applications like the electronic boarding pass, those will not distinguish a company. Electronic boarding passes have already been replicated by nearly every airline. In fact, we've already forgotten who was first.
Neymar machine that Run on electricity
Answers
"Neymar" = "name a"?
if so, well, there are many, like the little glowing box you use the type questions to the brainliest community, let it be a phone, a pc, or a molded Nintendo
if you meant Neymar indeed, I'm not sure if he runs on electricity, unless he is a soccer playing android somehow.
Write a program that repeatedly accepts as input a string of ACGT triples and produces a list of the triples and the corresponding amino acids, one set per line. The program will continue to accept input until the user just presses ENTER without entering any DNA codes.
Answers
Answer:
Explanation:
The following code is written in Python. I created a dictionary with all the possible gene combinations and their corresponding amino acids. The user then enters a string. The string is split into triples and checked against the dictionary. If a value exists the gene and amino acid is printed, otherwise an "Invalid Sequence" error is printed for that triple. The program has been tested and the output can be seen in the attached image below.
def printAminoAcids():
data = {
'TTT': 'Phe', 'TCT': 'Ser', 'TGT': 'Cys', 'TAT': 'Tyr',
'TTC': 'Phe', 'TCC': 'Ser', 'TGC': 'Cys', 'TAC': 'Tyr',
'TTG': 'Leu', 'TCG': 'Ser', 'TGG': 'Trp', 'TAG': '***',
'TTA': 'Leu', 'TCA': 'Ser', 'TGA': '***', 'TAA': '***',
'CTT': 'Leu', 'CCT': 'Pro', 'CGT': 'Arg', 'CAT': 'His',
'CTC': 'Leu', 'CCC': 'Pro', 'CGC': 'Arg', 'CAC': 'His',
'CTG': 'Leu', 'CCG': 'Pro', 'CGG': 'Arg', 'CAG': 'Gln',
'CTA': 'Leu', 'CCA': 'Pro', 'CGA': 'Arg', 'CAA': 'Gln',
'GTT': 'Val', 'GCT': 'Ala', 'GGT': 'Gly', 'GAT': 'Asp',
'GTC': 'Val', 'GCC': 'Ala', 'GGC': 'Gly', 'GAC': 'Asp',
'GTG': 'Val', 'GCG': 'Ala', 'GGG': 'Gly', 'GAG': 'Glu',
'GTA': 'Val', 'GCA': 'Ala', 'GGA': 'Gly', 'GAA': 'Glu',
'ATT': 'Ile', 'ACT': 'Thr', 'AGT': 'Ser', 'AAT': 'Asn',
'ATC': 'Ile', 'ACC': 'Thr', 'AGC': 'Ser', 'AAC': 'Asn',
'ATG': 'Met', 'ACG': 'Thr', 'AGG': 'Arg', 'AAG': 'Lys',
'ATA': 'Ile', 'ACA': 'Thr', 'AGA': 'Arg', 'AAA': 'Lys'
}
string = input("Enter Sequence or just click Enter to quit: ")
sequence_list = []
count = 0
gene = ""
for x in range(len(string)):
if count < 3:
gene += string[x]
count += 1
else:
sequence_list.append(gene)
gene = ""
gene += string[x]
count = 1
sequence_list.append(gene)
for gene in sequence_list:
if gene.upper() in data:
print(str(gene.upper()) + ": " + str(data[gene.upper()]))
else:
print(str(gene.upper()) + ": invalid sequence")
printAminoAcids()
You are going to purchase (2) items from an online store.
If you spend $100 or more, you will get a 10% discount on your total purchase.
If you spend between $50 and $100, you will get a 5% discount on your total purchase.
If you spend less than $50, you will get no discount.
Givens:
Cost of First Item (in $)
Cost of Second Item (in $)
Result To Print Out:
"Your total purchase is $X." or "Your total purchase is $X, which includes your X% discount."
Answers
Answer:
Code:-
using System;
using System.Collections.Generic;
class MainClass {
public static void Main (string[] args) {
int Val1,Val2,total;
string input;
double overall;
Console.Write("Cost of First Item (in $)");
input = Console.ReadLine();
Val1 = Convert.ToInt32(input);
Console.Write("Cost of Second Item (in $)");
input = Console.ReadLine();
Val2 = Convert.ToInt32(input);
total=Val1+Val2;
if (total >= 100)
{
overall=.9*total;
Console.WriteLine("Your total purchase is $"+overall);
}
else if (total >= 50 & total < 100)
{
overall=.95*total;
Console.WriteLine("Your total purchase is $"+overall);
}
else
{
Console.WriteLine("Your total purchase is $"+total);
}
}
}
Output:
2. Which property is used for hiding text of the textbox?
a) Password Char b) Text Char c) Char Password d) Pass Char
Answers
Answer:
password char
Explanation:
The password char property allows the text being written in the textbox to be hidden in the form of dots or stars. As such the user entering the password is secure, as no one nearby can know the password by watching the texts.
what are the functions of language in logic?
Answers
Answer:
Three basic functions of language: Informative, Expressive, and Directive Language
Informative language. Simply put, informative language can be looked at as though it is either right or wrong, or true or falseExpressive languageDirective languageWhat do you do if your computer dies/malfunctions? Reboot (Restart) Shut Down Recovery CD and Recover your system Call a person to fix it
Answers
Answer:
Restart
Explanation:
Simply I may restart my pc if it dies/malfunctions. I'll not restart immediately, I'll wait for an hour and do restart my computer. If it doesn't work then maybe I'll Call a person to fix it.
What is system software? Write its types.
Answers
Answer:
There are two main types of software: systems software and application software. Systems software includes the programs that are dedicated to managing the computer itself, such as the operating system, file management utilities, and disk operating system (or DOS)
Answer:
There are two main types of software: systems software and application software. Systems software includes the programs that are dedicated to managing the computer itself, such as the operating system, file management utilities, and disk operating system (or DOS)
Explanation:
thanks for question
What are some 5 constraints in using multimedia in teaching
Answers
Answer:
Explanation:
Technological resources, both hardware and software
Technological skills, for both the students and teacher
Time required to plan, design, develop, and evaluate multimedia activities
Production of multimedia is more expensive than others because it is made up of more than one medium.
Production of multimedia requires an electronic device, which may be relatively expensive.
Multimedia requires electricity to run, which adds to the cost of its use
There are constraints in using multimedia in teaching; The Technological resources, both hardware and software Also, Technological skills, for both the students and teacher
What is a characteristic of multimedia?
A Multimedia system has four characteristics and they are use to deliver the content as well as the functionality.
The Multimedia system should be be computer controlled. The interface is interactive for their presentation and lastly the information should be in digital.
There are constraints in using multimedia in teaching;
The Technological resources, both hardware and software
Also, Technological skills, for both the students and teacher
Since Time required to plan, design, develop, and evaluate multimedia activities
The Production of multimedia is more expensive than others because it is made up of more than one medium.
The Production of multimedia requires an electronic device, which may be relatively expensive.
The Multimedia requires electricity to run, which adds to the cost of its use.
Learn more about multimedia here;
https://brainly.com/question/9774236
#SPJ2
explain the working principle of computer? can anyone tell
Answers
Answer:
input process and output hehe
By Using the following schema, answer the following SQL queries and commands: Product(P_code.P_name, P_price, P_on_hand,vend_code) Vender(vend_code, vend_fname, vend_areacode, vend_phone) 1- find the venders names who sell products in TN-5 area and their names include "dan". 2- find the code, name and vender code of product that has price between 1500S and 2500S and the product that has price between 48005 and 5600S. 3- Find the name, and code of venders who had 5 microwaves that has price less than 3500S. 4- Find the phone numbers of venders who sell Televisions. 5- Delete the records of venders who their first name is 'smith'
Answers
Explanation:
answer me pls i need sol bbbd
Write a program that asks the user to enter in a username and then examines that username to make sure it complies with the rules above. Here's a sample running of the program - note that you want to keep prompting the user until they supply you with a valid username:
Answers
user_in = input ("Please enter your username: " )
if user_in in "0123456789":
print ("Username cannot contain numbers")
elif user_in in "?":
print ("Username cannot continue special character")
else:
print (" Welcome to your ghetto, {0}! ".format(user_in))
cho dãy số a[] có n phần tử và dãy số b[]cõ m phần tử là các các số nguyên dương nhỏ hơn 1000 . Gọi tập hợp A là tập các số khác nhau trong a[], tập hợp B là các số khác nhau trong b[]
Answers
Answer:
please translate
Thank you✌️
Write a recursive function named is_decreasing that takes as its parameter a list of numbers. It should return True if the elements of the list are strictly decreasing (each element in the array is strictly less than the previous one), but return False otherwise.
Answers
Answer:
c
Explanation:
Code Example 17-1 class PayCalculator { private: int wages; public: PayCalculator& calculate_wages(double hours, double wages) { this->wages = hours * wages; return *this; } double get_wages() { return wages; } }; (Refer to Code Example 17-1.) What coding technique is illustrated by the following code? PayCalculator calc; double pay = calc.calculate_wages(40, 20.5).get_wages(); a. self-referencing b. function chaining c. dereferencing d. class chaining
Answers
Answer:
The answer is "Option b".
Explanation:
Function chaining is shown by this code, as the functions are called one after the other with one statement. Whenever you want to call a series of methods through an object, that technique is beneficial. Just because of that, you may give the same effect with less code and have a single given value only at top of the leash of operations.
A backbone network is Group of answer choices a high speed central network that connects other networks in a distance spanning up to several miles. a group of personal computers or terminals located in the same general area and connected by a common cable (communication circuit) so they can exchange information. a network spanning a geographical area that usually encompasses a city or county area (3 to 30 miles). a network spanning a large geographical area (up to thousands of miles). a network spanning exactly 200 miles with common carrier circuits.
Answers
Answer:
a high speed central network that connects other networks in a distance spanning up to several miles.
Explanation:
A backbone network functions just like the human backbone providing support for network systems by offering a network infrastructure that allows small, high speed internet connectivity. It is a principal data route between large interconnected networks which offers connection services spanning several miles. Most local area networks are able to connect to the backbone network as it is the largest data connection on the internet. This backbone networks are mainly utilized by large organizations requiring high bandwidth connection.
How many cost units are spent in the entire process of performing 40 consecutive append operations on an empty array which starts out at capacity 5, assuming that the array will grow by a constant 2 spaces each time a new item is added to an already full dynamic array
Answers
Answer:
Explanation:
260 cost units, Big O(n) complexity for a push
How do i connect WiFi on windows xp without icon?
Answers
Answer:
Right click anywhere on your taskbar, and then click Properties. Step 2: Find and click the Notification Area tab on the top bar, and then find the section labeled with System icons, check the checkbox for Network. Last, click OK to finish it.
3. Using Assume the following list of keys: 36, 55, 89, 95, 65, 75, 13, 62, 86, 9, 23, 74, 2, 100, 98 This list is to be sorted using the quick sort algorithm as discussed in this chapter. Use pivot as the middle element of the list. a. Give the resulting list after one call to the function partition. b. What is the size of the list that the function partition partitioned
Answers
Answer:
a. 36, 55, 13, 9, 23, 2, 62, 86, 95, 65,74, 75, 100, 98, 89
b. 15
Explanation:
