why can't we measure temperature or build thermometer if there is no zeroth law? thanks

Answers

Answer 1

Explanation:

The Zeroth Law of Thermodynamics states that if two bodies are each in ... to heat, there will be no transfer of heat from one to the other.


Related Questions

physics as a subject involves measurement and estimation,giving examples of everyday life situations, explain the meaning and what is done in each case​

Answers

Answer:

57

Explanation:

Define measurement and write its importance.​

Answers

Answer:

Measurement is the way humans define certain amounts of matter, and is expressed in various types of units respective to the type of matter or object being defined.

Explanation:

Measurement is extremely important because it helps one another understand how much of something is needed to accomplish something. If no method existed to define the specific amount needed, we would simply mess delicate operations up and machines, even simple recipes, would fail.

28 Why is soft iron used for the core of an electromagnet?

А Soft iron easily becomes a permanent magnet.
B Soft iron is a good electrical conductor.
с Soft iron is a poor thermal conductor.
D Soft iron loses its magnetism when the current in the coil is switched off.​

Answers

Answer:

An electromagnet is a form of magnet that is made by the passage of electric current through a coil of wire. The core of an electromagnet increases the strength of the produced magnetic field

Soft iron is used as the core of an electromagnet because soft iron is a magnetic material and therefore it is permeable to and becomes magnetized by the magnetic field coming from the flowing current, thereby allowing more flux to pass through the core of the electromagnet, producing a magnetic field strength that is several times that of an air core electromagnet as the relative permeability (to magnetic flux, compared to vacuum) of soft iron is about 64 × 10³

However, once the current is switched, the soft iron does not remain its magnetic, and therefore, the electromagnet becomes demagnetized, thereby being able to maintain its electromagnetic characteristics (being made magnetic by the flow of electric current)

Explanation:

In which instrument of the following the water works as a bulb

Answers

Answer:

hydrometer

Explanation:

A hydrometer is an instrument used to determine specific gravity. It operates based on the Archimedes principle that a solid body displaces its own weight within a liquid in which it floats. Hydrometers can be divided into two general classes: liquids heavier than water and liquids lighter than water.

The question is given in the picture below.... please help me and mention all the steps..​

Answers

Answer:

a)water is turning into ice it is changing it's state from liquid to solid

b)B to C  ice is melting and it  is changing  it's state from solid to liquid

C to D water is boiling and it is changing it's state from liquid to vapours(steam)

c) temperature

At A 0

At B 0

At C 100

At D 100

Explanation: The temperature will remain 0 degrees Celsius until all the ice becomes water and the temperature will remain 100 degrees Celsius until all the  water changes into steam.

How does the temperature of a planet determine the states of matter you would observe on that planet?

Answers

Explanation:

the temperature will determine the kinetic energy or degree of freedom of the molecules of matter.

if the temperature is high, the kinetic energy of the molecules increase which may cause a change of state into a gas which has molecules of high kinetic energy. this shows that temperature is a measure of the kinetic energy of the molecules.

a car moves at a speed of 40km/h. it is stopped by applying brake which produce a uniform acceleration of-0.5m/s^2. how much distance will it move before coming to stop ? plz its urgent

Answers

Answer:

Explanation:

I answered this in question #24313516

The hair dryer has a plastic case so there is no need for an earth wire connection in the plug ,explain why the hair dryer is still safe to use.

Answers

Answer:

plastics are unable to conduct electricity and heat due to there being no free flowing electrons, meaning they are safe to use.

Explanation:

An observer measures a 100 Hz Doppler shift as an ambulance goes by. At rest, the frequency of the ambulance's siren is 2,000 Hz. What is the speed of the ambulance?

Answers

The change in the frequency of the sound, due to the relative motion of the source of sound and the observer, is determined by the Doppler's Effect.

The speed of the ambulance (source) is "6517 m/s"

The equation of Doppler's Effect is given as follows:

[tex]f_o = \frac{v+v_o}{v+v_s}f_s[/tex]

where,

[tex]f_o\\[/tex] = frequency of sound measure by observer  = 100 Hz

v = speed of sound = 343 m/s

[tex]v_o[/tex] = speed of observer = 0 m/s

[tex]v_s[/tex] = speed of ambulance (source) = ?

[tex]f_s[/tex] = actual frequency = 2000 Hz

Therefore, using the values, we get:

[tex]100\ Hz = \frac{343\ m/s + 0\ m/s}{343\ m/s + v_s}(2000\ Hz)\\\\(100\ Hz)(343\ m/s + v_s) = (343\ m/s)(2000\ Hz)\\\\v_s = \frac{686000\ Hz.m/s - 34300\ Hz.m/s}{100\ Hz}[/tex]

v_s = 6517 m/s

Learn more about Doppler's Effect here:

https://brainly.com/question/1330077?referrer=searchResults

What does vitamin c do for our body?

Answers

Answer:

necessary for the growth, development and repair of all body tissues. it's involved in many body functions, including formation of collagen, absorption of iron, the proper functioning of the immune system, wound healing, and the maintenance of cartilage, bones, and teeth.

Explanation:

Answer:

Vitamin C act as antioxidant which protect our cell from damaging caused by radicals.

A race car sits on the starting line on a racetrack. when the race starts, the car's tires exert a force on the track. According to newton's third law of motion, what causes the car to accelerate forward?
A. the track surface exerts a force that is larger and in the same direction as the force exerted by th tires.
B. a normal force that is equal in a magnitude to gravity pushes up on the car
C. the force of friction between the car tires and the track pulls the car forward
D. the track exerts a force that is equal and in the opposite direction as the force exerted by the tires

Answers

Answer:

D. the track exerts a force that is equal and in the opposite direction as the force exerted by the tires

Explanation:

Newton's third law of motion states that for every action, there is an equal and opposite reaction. This speaks of equality in magnitude of force applied but in an opposite direction to one another.

According to this reaction, a car's tires exert a force on the track, this means that in accordance to Newton's third law, the track must exert an equal but opposite force on the car's tires. This causes the car to accelerate forward.

How do longshore currents shape the land?

Answers

Longshore drift has a very powerful influence on the shape and composition of the coastline. It changes the slopes of beaches and creates long, narrow shoals of land called spits, that extend out from shore. Longshore drift may also create or destroy entire “barrier islands” along a shoreline.

Answer:

Longshore drift has a very powerful influence on the shape and composition of the coastline. It changes the slopes of beaches and creates long, narrow shoals of land called spits, that extend out from shore. Longshore drift may also create or destroy entire “barrier islands” along a shoreline.

if you add km/ hr with another km/ hr what will you get​

Answers

Answer:

km/hr

Explanation:

Addition and subtraction are commutative

Meaning you can add or subtract in any order because it doesn't change the sum or the difference. So it doesn't change the units.

Answer:

km/ hr + km/ hr =(km+ km)/hr=2km/hr

Explanation:

Mass of the sun is 2x10³⁰ kg and that of the earth is 6/10²⁴ kg and the distance between them is 1.5 x 10¹¹m. What is the gravitational force produced between them? ​

Answers

Answer:

The gravitational force is 3.56 × 10^22 N

Explanation:

[tex]{ \bf{force = \frac{GM_{s} m _{e}}{ {r}^{2} } }}[/tex]

[tex]{ \sf{force = \frac{6.67 \times {10}^{ - 11} \times (2 \times {10}^{30} ) \times (6\times {10}^{24}) }{(1.5 \times {10}^{11}) {}^{2} } }} \\ \\ { \sf{force = 3.56 \times {10}^{22} \: newtons}}[/tex]

In isoelectric focusing gel electrophoresis a. there is a pH gradient that parallels the electric field gradient b. particular care must be taken to ensure the same pH along the length of the gel c. the electric current is allowed to fluctuate d. the electric circuits of the apparatus must be very well insulated

Answers

Answer:

a. there is a pH gradient that parallels the electric field gradient.

Explanation:

Gel electrophoresis is a technique used to separate DNA fragments according to their size. DNA samples are loaded in the wells and then electric current is applied to pull the DNA fragments out from the gel. Isoelectric gel electrophoresis is a process in which negatively charged DNA fragments are separated from the gel.

What is the purpose of the lab the importance of the topic and the question you are trying to answer?

Answers

perpose of lab is to store apparatus and do some experiment

Helps someone to know the exert lengh of something


If Bulb B burns
out, what happens?
A Bulb A and C will stay lit.

Answers

Answer: C

Explanation:

Since bulb B is burnt out, the wires can't transfer to bulb A, so that's why bulb A will burn out.

If I get it wrong, sorry. Im still learning.

How Do Manometers Work? steps by steps

Answers

Explanation:

A manometer is a device that measures air pressure using a container with a "U"-shaped tube open at one or both ends. In a closed manometer, a sample of gas is introduced into one end, which is then capped. ... This pressure represents the positive or negative difference between the gas pressure and atmospheric pressure

Answer:

I hope this helps

In the manometer, one end connects to a gas-tight seal to test the pressure source.

2. In addition, the other end of the tube is left open to the atmosphere and it will be subjected to the pressure of approximately 1 atmosphere (atm).

3. Besides, the test pressure is greater than the pressure of 1 atm (atmosphere) the liquid in the column will be forced down by the pressure.

4. Furthermore, it will cause the liquid of the reference column to rise by an equal amount.

7. A thin wire was wound 30 times closely over a boiling tube. The total length of the windings as measured was found to be 6.3mm. Determine the diameter of the wire .​

Answers

Answer:

Diameter of wire = 0.00021 meters

Explanation:

Given the following data;

Number of windings = 30

Length of windings = 6.3 mm to meters = 0.0063 meters

To find the diameter of the wire, we would use this mathematical expression;

Length of windings = number of windings * diameter of wire

Substituting the values into the expression, we have;

0.0063 = 30 * diameter of wire

Diameter of wire = 0.0063/30

Diameter of wire = 0.00021 meters

Please help! Will mark Brainliest.

Answers

Answer:

18 Nm

Explanation:

if the correct answer

a ball was changed vertically upwards with kinetic energy 200 joule what will be the total energy and Midway​

Answers

Answer:

Part 1; The total energy = Constant = 200 J

Part 2; Midway, the potential energy = The kinetic energy = 100 J

Explanation:

Part 1

According to the first law of thermodynamics, energy is neither created nor destroyed but changed from one form to another

The total (mechanical) energy = Potential energy + Kinetic energy = Constant

The kinetic energy given to the ball changed vertically up = 200 J

Potential energy = Mass, m × Gravity, g × Height, h

Given that the mass m of the ball and the acceleration due to gravity, g, remain the same, we have;

Potential energy ∝ The height of the ball

The potential energy at ground level = 0 J (Height , h = 0)

∴ The total (mechanical) energy = 0 J + 200 J = 200 J

At the maximum height, the ball momentarily stops, and the kinetic energy = 0 J

Therefore;

The potential energy of the ball at the maximum height, [tex]h_{max}[/tex], [tex]P.E._{max}[/tex] = 200 J

∴  [tex]P.E._{max}[/tex] = m·g·[tex]h_{max}[/tex] = 200 J

Part 2

At midway we have, the height, h = ([tex]h_{max}[/tex])/2

Therefore, [tex]P.E._{Midway}[/tex] = (m·g·([tex]h_{max}[/tex]))/2 = ([tex]P.E._{max}[/tex])/2 = (200 J)/2 = 100 J

The potential energy midway = 100 J

The  remaining 200 J - 100 J = 100 J is the kinetic energy remaining in the ball

The kinetic energy midway = 100 J

Therefore, the total energy midway = 100 J + 100 J = 200 J

Which class of lever has all advantages of lever

Answers

Answer:

Helo ....

so this answer would be First class levers

becoz...

First-class levers have a considerable practical advantage over the other types of levers. They convert a downward moving force into a lifting force

is it possible to mark it brainliest <3

SHOW REFRACTION THROUGH A GLASS SLATE WITH NEAT DIAGRAM
[tex] \: \: \: \: \: \: \: \: \: \: \: I \: need \: answer \: [/tex]

Answers

Refer to the attachment

A car moving at 41.35 m/s hits a brick wall and stops in 0.140 s. What is the
acceleration of the car?

Answers

Answer:

Acceleration, a = 295.36 m/s²

Explanation:

Given the following data;

Final velocity = 41.35 m/s

Initial velocity = 0 m/s

Time = 0.140 seconds

To find the acceleration, we would use the first equation of motion;

V = U + at

Where;

V is the final velocity.

U is the initial velocity.

a is the acceleration.

t is the time measured in seconds.

Substituting into the equation, we have;

41.35 = 0 + a*0.140

41.35 - 0 = 0.140a

41.35 = 0.140a

Acceleration, a = 41.35/0.140

Acceleration, a = 295.36 m/s²

How many valence electrons does each atom of arsenic (As) have? Arsenic is element 33. It is in period 4 and family 15 (5A or the Nitrogen family).

(1 point)

15


33


5


4

Answers

Answer:5

Explanation:

How much power does it take to lift a box with a weight of 50N to put it on a shelf that is 10m high in
10 sec?

Answers

Force=50NDisplacement=10mTime=10s

We know

[tex]\boxed{\sf Power=\dfrac{Work\:done}{Time}}[/tex]

[tex]\\ \sf\longmapsto Power=\dfrac{Force\times displacement}{Time}[/tex]

[tex]\\ \sf\longmapsto Power=\dfrac{50\times 10}{10}[/tex]

[tex]\\ \sf\longmapsto Power=\dfrac{500}{10}[/tex]

[tex]\\ \sf\longmapsto Power=50W[/tex]

Help quick
How does the ramp produce mechanical advantage?
A it reduces the amount of input force needed to do a certain amount of work
B it reduces the distance over which the input force needs to be applied
C it reduces the amount of useful work done on objects move it up the ramp
D what is the overall amount of work done on object moving up the ram

Answers

C it reduces the amount of useful work done on objects move it up the ramp

1.slope of distance time graph gives______in the case of uniform motion.

2.The magnitude of velocity and______will be equal if motion is along a straight path.

Answers

the first one answer is speed and the second one is direction.

Answer:

1. Slope of distance time graph gives Speed in the case of uniform motion

2.The magnitude of velocity and Displacement will be equal if motion is along a straight path

Explanation:

PLEASE MARK BRAINLEST

A 210 Ohm resistor uses 9.28 W of
power. How much current flows
through the resistor?
(Unit = A)

Answers

Resistance=R=210OhmPower=9.28W=P

Current=I

[tex]\boxed{\sf P=I^2R}[/tex]

[tex]\\ \sf\longmapsto I^2=\dfrac{P}{R}[/tex]

[tex]\\ \sf\longmapsto I^2=\dfrac{9.28}{210}[/tex]

[tex]\\ \sf\longmapsto I^2\approx0.04[/tex]

[tex]\\ \sf\longmapsto I\approx\sqrt{0.04}[/tex]

[tex]\\ \sf\longmapsto I\approx\sqrt{\dfrac{4}{100}}[/tex]

[tex]\\ \sf\longmapsto I\approx\dfrac{\sqrt{4}}{\sqrt{100}}[/tex]

[tex]\\ \sf\longmapsto I\approx\dfrac{2}{10}[/tex]

[tex]\\ \sf\longmapsto I\approx0.2A[/tex]


Can someone help me please this test is very important

Answers

Answer:

Friction is caused in roller coasters by the rubbing of the car wheels on the track and by the rubbing of air (and sometimes water!) against the cars.

Explanation:

Other Questions
Given that f(x) = 2x + 9, find the value that makes f(x) = 27. Ginny and her classmates formed a study group. The number of girls in the study group was 3 more than twice the numberof boys. There were 11 girls in the study group. How many boys were in the study group? Karen has been asked to head a team at work that is charged with finding new ways to develop products for their marketing group. She has asked her team members to begin exploring approaches that have worked in the past and to identify approaches that have not worked before. Karen wants her team members to start the process of Group of answer choices Why did the United States pay 20 million dollars to Spain for the purchase of the Philippines Which excerpt from "Ain't I a Woman?" is the best example of logos? Help Why were The Middle Ages enslaved? Can someone pls help with this Wrapping a Package It takes 70 inches of ribbon to make a bow and wrap the ribbonround a box. The bow takes 32 inches of ribbon. The width of the box is 14 inches. Whatthe height of the box?-14 in. - The width of a rectangle is 9 inches less than the length. The perimeter is 86 inches Which ordered pair would form a proportionalrelationship with the points in the graph?O (44)O (69)O (9,6)O (8,5) Write a sentence containing the plural possessive form of the noun, parent. (iii) n(U) = 25, n(A) = 16 and n (B) = 2 n(AUB)=? match the group in column 1 to the action it wants to take toward the amazon forest in column 2 Solve by substitution:y=x-128x+8y=-16 A region is bounded by x=y^2 and x=4 and y=0 and revolved about the line x=5. Find the volume using shell method. A trust has been established to fund scholarships in perpetuity. The next annual distribution will be $1,200, and future payments will increase by 3 percent per year. What is the value of this trust at a discount rate of 7.4 percent PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!! ANYONE PLEASE I'M DESPERATE A.FDescribe the transformation that takes place with the following rule:(x - 2, y + 4)A. Translates 2 units left AND 4 units up.B. Translates 2 units down AND 4 units right.C. Translates 2 units up AND 4 units down.D. Translates 2 units right AND 4 units up. Particle A has less mass than particle B. Both are pushed forward across a frictionless surface by equal forces for 1 s. Both start from rest. Which is true? A. A has more momentum. B. B has more momentum. C. A and B have the same momentum D. Not enough information. If the right angle triangle LMN.L=30, MN = 4cm and diagonal LM.Find the LM and LN. (a) A lamp has two bulbs of a type with an average lifetime of 1800 hours. Assuming that we can model the probability of failure of these bulbs by an exponential density function with mean = 1800, find the probability that both of the lamp's bulbs fail within 2000 hours.(b) Another lamp has just one bulb of the same type as in part (a). If one bulb burns out and is replaced by a bulb of the same type, find the probability that the two bulbs fail within a total of 1000 hours.