Why are road accidents at high speeds very much worse than road accidents at low speeds?

Answers

Answer 1

Answer:

The momentum makes it worse.

Explanation:

The momentum of vehicles running at faster speeds is very high and causes a lot of damage to the vehicles.

Answer 2
Vehicles with high speeds have high momenta (plural of momentum). When they come to rest in very small time they experience high forces
we know that rate of change of momentum is force, lower the time higher is force. So, slow moving vehicles experience less force. It is important to note that if any one vehicle involving has high speed it can do more damage both the vehicles involving.

Related Questions

define 1 second time​

Answers

Answer:

define 1 second time

One second is the time that elapses during 9,192,631,770 (9.192631770 x 10 9 ) cycles of the radiation produced by the transition between two levels of the cesium 133 atom. ... One second is equal to 1/86,400 of a mean solar day.

Answer:

One part of 86400 part of a day is called one second time.

✌✌✌✌

Rearrange this equation so it equals d
v=dt

Answers

Answer:

Below

Explanation:

To solve for d rearrange the formula v = (d)(t) to:

  d = v / t

I'm not to sure if you are using different variables but usually in physics the formula for velocity is v = d / t not v = dt

If you wanted to solve for displacement you would do:

  d = (v)(t)

Hope this helps!

The moon Phobos orbits Mars
(mass = 6.42 x 1023 kg) at
a distance
of 9.38 x 106 m. What is its period of
orbit?
[?]s

Answers

Answer:

Explanation:

We are basically needing to solve for the time in the equation d = rt, where d is the distance around Mars (aka the circumference), r is the velocity, and t is time. We need to find the circumference and the velocity. We will begin with the velocity.

Because the gravitational attraction between Phobos and Mars provides the centripetal acceleration necessary to keep Phobos in its (sort of) circular path, the equation we use for this is:

[tex]F_g=F_c[/tex] which says that Force supplied by gravity is equal to the centripetal force. Expanding that:

[tex]\frac{Gm_{Phobos}m_{Mars}}{r^2}=\frac{m_{Phobos}v^2}{r}[/tex]

When we move that around mathematically to solve for the velocity value, what we end up with is:

[tex]v=\sqrt{\frac{Gm_{Mars}}{r}[/tex] and filling in:

[tex]v=\sqrt{\frac{(6.67*10^{-11})(6.42*10^{23})}{9.38*10^6} }[/tex] and we get that

v = 2100 m/s

Now for the circumference:

C = 2πr and

C = 2(3.1415)(9.38 × 10⁶) so

C = 5.9 × 10⁷

Putting that all together in the C = vT equation:

5.9 × 10⁷ = 2100T so

T = 2.8 × 10⁴ sec or 7.8 hours

You plan to pass alpha particles through a field that contains a consistent type of particle. Which configuration will result in the largest deflection of alpha particles? (1 point)

low-energy alpha particles passing through a field of low mass-number-particles

low-energy alpha particles passing through a field of high mass-number-particles

high-energy alpha particles passing through a field of high mass-number-particles

high-energy alpha particles passing through a field of low mass-number-particles

Answers

Answer:

low-energy alpha particles passing through a field of high mass-number-particles

Answer:

low-energy alpha particles passing through a field of high mass-number-particles

Explanation:

why is it important to have regular super vision of the weights and the measurements in the market?

Answers

Answer:

Obeying to weights & measurement regulations in both national and international metrology legislation, standards and test procedures is a requirement to participate in any market because it's aimed to safeguard the consumers and promote fair competition, which provides efficiency and saves unnecessary costs to U.S. businesses and stakeholders.

Explanation:

In the U.S., the National Institute of Standards and Technology (NIST) has an Office of Weights and Measures (OWM) that represents the country in the International Organization of Legal Metrology (OIML)

Two forces whose resultant is 100N are at right angle to eachother. if one of them makes an angle of 30° with the resultant, determine its magnitude​

Answers

Let F₁ and F₂ denote the two forces, and R the resultant force.

F₁ and F₂ point perpendicularly to one another, so their dot product is

F₁ F₂ = 0

We're given that one of these vectors, say F₁, makes an angle with R of 30°, so that

F₁ • R = ||F₁|| ||R|| cos(30°)

But we also have

F₁ • R = F₁ • (F₁ + F₂) = (F₁ F₁) + (F₁ F₂) = F₁ F₁ = ||F₁||²

So, knowing that ||R|| = 100 N, we get that

(100 N) ||F₁|| cos(30°) = ||F₁||²

(100 N) cos(30°) = ||F₁||

||F₁|| ≈ 86.6 N

(And the same would be true for F₂.)

What do is mean by environment friendly behaviour?​

Answers

Answer:
Being environmentally friendly means having a lifestyle that is better for the environment

the weight of a body is 420 newton.calculate it's mass​

Answers

Answer:

42g

Explanation:

the mass of a body is given by

m=weight/gravity

=420/10

=42

I hope this helps

A bullet with a mass mb=13.5 g is fired into a block of wood at velocity vb=245 m/s. The block is attached to a spring that has a spring constant k of 205 N/m. The block and bullet continue to move, compressing the spring by 35.0 cm before the whole system momentarily comes to a stop. Assuming that the surface on which the block is resting is frictionless, determine the mass mw of the wooden block.

Answers

Momentum is conserved, so the sum of the momenta of the bullet and block before collision is equal to the momentum of the combined bullet-block system,

[tex]m_bv_b+m_wv_w = (m_b+m_w)v[/tex]

where v is the speed of the bullet-block system. The block starts at rest so it has no initial momentum, and solving for v gives

[tex]v = \dfrac{m_b}{m_b+m_w} v_b[/tex]

The total work W performed by the spring on the bullet-block system as it is compressed a distance x is

[tex]W = -\dfrac12kx^2[/tex]

where k is the spring constant, and the work done is negative because the restoring force of the spring opposes the bullet-block as it compresses the spring.

By the work-energy theorem, the total work done is equal to the change in the bullet-block's kinetic energy ∆K, so we have

[tex]W_{\rm total} = W = \Delta K[/tex]

The bullet-block starts moving with velocity v found earlier and comes to a stop as the spring slows it down, so we have

[tex]-\dfrac12kx^2 = -\dfrac12(m_b+m_w)v^2 \implies kx^2 = \dfrac{{m_b}^2}{m_b+m_w}{v_b}^2[/tex]

Solve for [tex]m_w[/tex]:

[tex]m_w=\dfrac1k\left(\dfrac{m_bv_b}x\right)^2-m_b[/tex]

[tex]m_w=\dfrac1{205\frac{\rm N}{\rm m}}\left(\dfrac{(0.0135\,\mathrm{kg})\left(245\frac{\rm m}{\rm s}\right)}{0.350\,\rm m}\right)^2-0.0135\,\mathrm{kg}\approx \boxed{0.422\,\mathrm{kg}}[/tex]

mercury is commonly used in thermometer give reasons​

Answers

Answer:

hi

BECAUSE MERCURY IS USED BECAUSE IT is the only liquid available in room temperature

Explanation:

pls mark as a BRAINLIST

Un muelle se alarga 20 cm cuando ejercemos sobre él una fuerza de 24 N. Calcula:El valor de la constante elástica del muelle

Answers

Answer:

120 Nm-1

Explanation:

Según la ley de Hooke;

F = Ke

F = fuerza sobre el resorte

K = constante de fuerza

e = extensión

Por eso;

K = F / e

K = 24N / 20 × 10 ^ -2m

K = 120 Nm-1

is there any machine that is 100% efficient? why?why not

Answers

Answer:

No, it's not there.

Explanation:

For a machine to be 100% efficient, it has to be with an output which is equal to its input. But machines have an out put less than an input, hence efficiency below 100%.

why is the fuse used in a circuit called safety fuse?

Answers

Answer:

The maximum current which can flow through a fuse without melting it, is called its rating. ... If current higher than 8 A flows through the fuse, it would melt and circuit gets broken. ... Hence, fuse acts as a safety device

Answer:

The guy above me is right

Explanation:

20. A semiconductor is a
A) crystalline solid that conducts current under any condition
B) metallic solid that conducts current under any condition
C) metallic solid that conducts current under certain conditions
D) crystalline solid that conducts current under certain conditions

Answers

Answer:

D) crystalline solid that conducts current under certain conditions

Explanation:

A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.

Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.

What is not one of the main uses of springs?
A. Bike suspension
B. The seasons
C. Clock making
D. Car suspension

Quick answer

Answers

Answer:

b. the seasons

Explanation:

A converging lens of focal length 20cm, forms a real image twice the size of the object. Calculate:
i) the power of the lens;
ii) the position of the image.

Answers

Answer:

Solition given:

focal length(f)=20cm

size of image(v)=2x

size of object(u)=x

we have

power of lens= reciprocal to focal length=1/20=0.05/cm

ii.

the position of the image is beyond C.

Explanation:

See the attachment !!!!!!!

Ag,Au and Cu are called coinage metals why plzzzz hurry its urgent plzzz​

Answers

Answer:

This is because these metals are used for minting (making) coins.

Answer:

It is bcz it is used for making coins

How do longshore currents shape the land?

Answers

Longshore drift has a very powerful influence on the shape and composition of the coastline. It changes the slopes of beaches and creates long, narrow shoals of land called spits, that extend out from shore. Longshore drift may also create or destroy entire “barrier islands” along a shoreline.

Answer:

Longshore drift has a very powerful influence on the shape and composition of the coastline. It changes the slopes of beaches and creates long, narrow shoals of land called spits, that extend out from shore. Longshore drift may also create or destroy entire “barrier islands” along a shoreline.

Why does the weight of a body differ on different celestial bodies of the universe?​

Answers

An object's weight is dependent on its mass and how strongly gravity pulls on it. The strength of gravity depends on how far away one object is from another.

What is 98.907 rounded to 1 significant figure?

Answers

The answer to the digits rounded to one significant figure is 100.

Significant figures are the most important figures in a number of digits.

The closer a digit is to the beginning of a number, the more important  or significant  it is.

But, the rule for rounding up a set of numbers to the first significant or to one significant figure is that:

If the next number is 5 or more, we round up.If the next number is 4 or less, we do not round up.

From the numbers 98.907, 9 is the most significant digit followed by 8.

8 is greater than 5 so we should round up by adding one to 9 making the number 100.

learn more here:

https://brainly.com/question/11566364

the force between the earth and the body which is at a distance r from the center of the earth is F. What must be this distance for the force to be doubled.

Answers

Answer:

Explanation:

The gravitational force between the earth and another body is F = -GM_em/r^2 r where G = 6.67 times 10^-11 Nm^2/kg^2 is the gravitational constant, M_e = 5.97 times 10^24 kg is the mass of the earth, m is the mass of the other body, and r is the position vector of the second body with respect to the centre of the earth.

1. How much heat energy ( Q ) is required to heat 2.0 kg of copper from 30.0 oC to 80.0 oC?

Answers

Answer:

38500

Explanation:

I looked it up so it may be wrong

List two factors that compression force depends on ​

Answers

The magnitude (size or numerical value) and the direction.

Hope this helps!!! :)

The plane of a5cm*8cm rectangular loop of wire is parallel to a 0.19T magnetic field the loop carries a current of 6.2 A. What torque acts on aloop? What is the magnetic moment of the loop?

Answers

Answer:

Torque; τ = 4.712 × 10^(-3) J

Magnetic moment; M = 0.0248 J/T

Explanation:

Torque is gotten from the formula;

τ = BIA

Where;

B is magnetic field

I is current

A is area

We are given;

B = 0.19T

I = 6.2A

Rectangle dimensions = 5cm by 8cm = 0.05m by 0.08m

Thus;

Area; A = 0.05m × 0.08m = 0.004 m²

Thus;

τ = 0.19 × 6.2 × 0.004

τ = 4.712 × 10^(-3) J

Formula for the magnetic moment is given by;

M = IA

M = 6.2 × 0.004

M = 0.0248 J/T


What kind of circuit is the one shown below?
A. Series
B. Parallel
C. Open
D. Combination

Answers

That's a parallel circuit. (B)

When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice:  Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.

A circuit that has any "decision" points in it is a parallel circuit.  What happens in the real world is:  The current splits up.  Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.

A series circuit is one in which there's only one possible path all the way around.  There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.

An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it.  It's like a railroad where a big piece is cut out of the track somewhere.  So no trains can travel on that route, and there's no current flowing anywhere in the circuit.

I'm not so sure about a "combination" circuit.  I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts.  Personally, I'd call that a "series-parallel" circuit.  But it really doesn't matter right now.  Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.

Answer:

B. Parallel Circuits

Explanation:

A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.

hope i helped

define Neutons 3rd law .​

Answers

Answer:

that when two object interact, they apply forces to one another that are equal in magnitude and opposite in direction.

Explanation:

Newton's third law: the law of action and reaction

Does water exist on Mars? Explain your answer. Why didn't Jupiter become a star during the early.​

Answers

Answer:

yes water was discovered in mars

Saul is testing an installation and discovers a short circuit what’s causing this
A.high current

B.high voltage

C.low resistance

D.low voltage

Answers

Answer:
C. Low resistance

Answer:

im pretty sure that it's (A.) High current

Explanation:

pf

not 100% sure, tho

derive an expression for resistivity of conductor of length l and area of cross section A​

Answers

Answer

Resistivity R = K * L / A    where resistivity is constant for material, L the length of the material and A the area of the material

K = R * A / L     where R is the resistance of the material

How does the temperature of a planet determine the states of matter you would observe on that planet?

Answers

Explanation:

the temperature will determine the kinetic energy or degree of freedom of the molecules of matter.

if the temperature is high, the kinetic energy of the molecules increase which may cause a change of state into a gas which has molecules of high kinetic energy. this shows that temperature is a measure of the kinetic energy of the molecules.

Other Questions
After getting RM24 from his mother, Samuel had 3 times as much as he had previously. How much did he have previously? Which statement is not true about the field of science?it is based on observations and explanations of the natural world. Where ____?have you beenare you beenhas you beenhave you werecual es lacorrecta? ____ church on the corner is progressive. Please help me with this I need it _________reflexes are stimulated by stretching or chemical stimulation of the myenteric plexus, which can result in peristaltic contractions. ________ reflexes utilize the parasympathetic nervous system, specifically the nerve. Hormonal secretions like _______ and _______ secretin are released into the blood and stimulate relatively distant parts of the digestive tract. Paracrine secretions like and prostaglandins diffuse through the tissue fluids and stimulate nearby target cells. match each term to its definition a steam of plasma Please help explanation if possible Find the solutions to x2 = 28.A. x = 14,2O B. x = +2./14O C. X = +2,7O D. x = -7/2 Factors and rewrite the expression 25x-15 A popular beach erodes 4 inches per year on average.An eroding beach.A. How many years will it take for the coastline to erode one foot? True or false, The four units that must always be used when using the ideal gas are 44.0 liters (b) Work out the probability Jennifer hits the Bullseye at least once.Can someone work this out for me ? Give example to verify if the given statement is true or false1) if two numbers are co-primes , at least one of them should be prime number. What happens during S phase?O A. Chromosomes are duplicated.O B. DNA separates into two nuclei.O C. The cell splits in two.O D. Cytoplasm is manufactured. Joylin is writing an equation to model the proportional relationship between y, the total cost in dollars of downloading videos from a website, and x, the number of videos downloaded. She knows that the total cost to download 3 videos was $12. Her work to find the equation is shown below.Joylins WorkStep 1k = StartFraction 3 over 12 EndFraction = 0.25Step 2y = 0.25 xWhere did Joylin make her first error? A gift wrapped box that wants to become a human in comic strip form mine is a Chamaeleon and a human who is helping to get her into a human form hey can u help me in my hw Human activities also cause the earth quake explain and plz don't write the thing not related 2 the question. How To Demonstrate Successful Leadership In The Workplace By Dionne Mahaffey, Founder of The Life Purpose Coaching Institute As with all skills, some of us are more adept at leadership than others. However, if you find yourself lacking in this area, keep in mind that your current struggles may be taking you down the pathway to eventual success. You can leverage the key fundamentals of successful leadership in order to impact your team and become the leader you desire to be. Successful leaders are effective communicators. In fact, communication will most likely be the major building block of your success in leadership. What makes a communicator effective, exactly? I have found the following guidelines to be helpful: Always consider all angles before crafting your message. Think about the "who," "what" and "how" of the situation. Keep the following questions in mind: What is the issue at hand? How can it be solved? Who am I asking to take action? What are the possible obstacles? What tools will I need to provide to make the process easier? Make sure your message is understood. Anyone can deliver a message, but not everyone confirms that the message is understood. Dont hesitate to repeat yourself to make a point. Always ask your team members if they have any questions or comments. Wait five-to-10 seconds before moving on in order to give your team time to process the information and formulate responses. Manage and prevent conflicts with consideration and purpose. Handle conflict between employees immediately. Otherwise, you risk the creation of a toxic environment where employees fail to see you as a capable leader. Stay a step ahead and strive to prevent conflict by observing your employees and learning their emotional triggers. For example, consider your employees working styles: some are very methodical, plugging along to the end. Others procrastinate and then rush to accomplish everything at the last minute. A way to avoid conflict is to pair employees with similar working styles. Give specific and appropriate praise for individual and team efforts. When you specifically state what you appreciate, your praise should translate as being authentic, not as an empty gesture. For example, The candid testimonials you gathered gave us valuable insight on the product that we wouldnt have had otherwise. This conveys exactly what impressed you, and offers the bonus of reinforcing desired behavior.Title of Text: How to Demonstrate Successful Leadership in the WorkplaceAuthor: Dionne Mahaffey ---------------Subject: Occasion: Audience: Purpose: Speaker: Tone: Positive punishment is the introduction of a(n) ________ stimulus following a behavior and negative punishment is the withdrawal of a(n) ________ stimulus following a behavior. Select one: aversive; aversive pleasant; aversive pleasant; pleasant aversive; pleasant