Answer: precision
Explanation: precision is how close the different measurements are to each other and accuracy is how close the measurements are to the true value
How many grams of hydrogen are needed to fully react 621. 9 grams of nitrogen gas.
Answer:
9 grams of nitrogen gas
Explanation:
Sulphuric acid (H2SO4) is titrated against 25.00cm3 of 0.200 mol/dm3 Sodium hydroxide solution (NaOH). It is found that 23.20 cm3 of sulphuric acid is required for neutralization. Calculate the concentration of Sulphuric acid
Why is it important to possess fundamental research skills in pursuing your study?
Answer:
Research Skills enable people to identify a problem, collect informational resources that can help address the problem, evaluate these resources for quality and relevance and come up with an effective solution to the problem.
Explanation:
It is important because it might increase you critical thinking skills and it's much more easy for you to collect data. It also helps you analyze information from different sources off the internet.
How might a molecule have a very strong molecular dipole?
Answer:
When you make the electronegativities of A(Positive partial charge) and C (Negative Partial charge) less and have B with a strong electronegativity to create a very strong molecular dipole. ... Both molecules possess strong molecular dipoles.
What causes streams to form?
O absorption
O precipitation
O glaciers
O lakes
Answer: essay the answer is B: precipitation
Explanation:
There is 200 grams of water on a stove. The water is currently 25 C. How much energy in joules must be used to raise the water to 90 C?
Answer:
q
=
64 kJ this is answer. .
Kinda confused on this. i need some help.
What is activation energy
Answer: Activation energy is defined as the minimum amount of extra energy required by a reacting molecule to get converted into product. It can also be described as the minimum amount of energy needed to activate or energize molecules or atoms so that they can undergo a chemical reaction or transformation.
Explanation:
balance CHCl3 + O2 = CO2 + H2O + Cl2
Answer:
2CHCl3 + 5/2 O2 => 2CO2 + H20 + 3Cl2
Explanation:
Left Hand Side(LHS)
We have CHCl3 and O2
Right Hand Side(RHS)
We have CO2, H2O and Cl2
Balancing
To make sure that they have same values, put 2 before CHCl3 giving 2CHCl3 and 3 on Cl2(RHS) for chlorine gas giving 3Cl2
H2O remains the same
Before CO2 put 2 giving 2CO2
To make sure that oxygen is balanced put 5/2 before it. This gives 5/2 O2 (2 cancels out don't worry)
Combining all;
2CHCl3 + 5/2 O2 => 2CO2 + H20 + 3Cl2
I hope this helps. Have a nice studies.
When a substance is heated ,the kinetic energy of its molecules
Answer:
When a substance is heated ,the kinetic energy of its molecules also increase.
Explanation:
K.E is directly proportional to T
Don't really understand the question
Answer:
Did they mean those diagrams are the salt or what?
how many moles are present in 10.0 grams of sodium hydroxide
Answer:
0.25
Explanation:
no.of moles =10/40
Word Equation for Magnesium reacting with Iron Chloride
Answer:
3Mg+2FeCl3------------3MgCl2+ 3Fe
wht will react with acid to giv bluish green salt nd water ??
Explanation:
When dilute HCl is added to a small amount of copper oxide in a beaker, a greenish-yellow gas is released and a bluish-green solution is formed. Since the metal oxides such as a Copper oxide (CuO) are basic in nature, it reacts with acids such as HCl to form the corresponding salt and water.
can anyone tell me "what are the exceptions of law of reciprocal proportions??"
Who know the answers for both of these or know were to get them from
Answer:
kdkekejdjejeneneenendjenejekeke do do do do do do d
Answer:
go ahead bro
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
đơn chất nào sau đây tác dụng với dung dịch axit sunfuric loãng sinh ra khí ?
a đồng
b cacbon
c nhôm
d lưu huỳnh
Answer:
C. Al
Explanation:
2Al+ 3H2SO4(l)------> Al2(SO4)3+ 3H2
Which are effects of long-term exposure to mustard gas? Select all that apply. One, some, or all responses may be correct.
The effects of long-term exposure to mustard gas causes mortality and chronic respiratory disease.
Exposure to mustard gas in the long term can result in mortality from influenza, pneumonia as well as chronic breathing disease. Exposure for long term leads to respiratory complications and septic shock. Extensive breathing in the environment of mustard gas can cause chronic respiratory disease, respiratory infections or death.
Extensive eye exposure to this gas can cause permanent blindness. Exposure to mustard gas may also increase the chances of lung and respiratory cancer so we can conclude that mustard gas is lethal and can cause a number of diseases in a person who is exposed to it.
Learn more: https://brainly.com/question/25686553
Look at the Recording station detector on the upper left side of the Gizmo. What happens when the seismic waves hit the recording station?
Answer:
I don’t know what recording station you’re referring to but, When seismic waves reach the seismograph, a graphical record, or seismogram, is produced
Explanation:
The seismic waves hitting the recording station has been resulted in the seismograph, that has been evident of the earthquake.
The seismic wave has been the radiation, with the result of the movement of the earth surface. The movement has been result in the earthquake.
The intensity of the earthquake has been measured by seismograph on the Richter scale. The seismic wave results in the movement of the leads to the production of the seismograph.
The seismic waves hitting the recording station has been resulted in the seismograph, that has been evident of the earthquake.
For more information about earthquake, refer to the link:
https://brainly.com/question/1296104
What does it mean for a unit to be "derived"?
Answer:
you differentiate to find the derivative
Explanation:
Answer:
A derived unit is a unit that results from a mathematical combination of SI base units.
OR
A unit of measurement obtained by multiplication or division of the base units of a system without the introduction of numerical factors.
Explanation:
i dont know if that answered your question
how long does it take to rehydrate after being dehydrated
Answer:
up to 120 minutes to digest water and rehydrate your body
What is the mass of 1,300 cm of gasoline? The density of gasoline is 0.67 g/cm.
Answer:
Volume x Density = Mass of a substance
1300 x 0.67 = 871
The mass is 871 (unit)
9) What is the final pressure in the container shown below after the valve is opened and the gases are allowed
to flow? (The gases do not act)
0
4.00 am
3.00
NE
2.00 am
2.00 L
A 3.00-L container with O₂ at 4.00 atm is connected to a 2.00-L container with Ne at 2.00 atm, resulting in a final pressure of 3.20 atm in the container.
We have 2 containers connected by a valve.
One container has a volume of 3.00 L and contains O₂ at 4.00 atm. The other container has a volume of 2.00 L and contains Ne at 2.00 atm.
When the valve is opened, the total volume is the sum of the 2 containers.
[tex]V_2 = 3.00 L + 2.00 L = 5.00 L[/tex]
Assuming constant temperature and ideal behavior, we can calculate the final pressure of each gas using Boyle's law.
O₂
[tex]P_1 \times V_1 = P_2 \times V_2\\\\P_2 = \frac{P_1 \times V_1}{V_2} = \frac{4.00atm \times 3.00L}{5.00L} = 2.40atm[/tex]
Ne
[tex]P_1 \times V_1 = P_2 \times V_2\\\\P_2 = \frac{P_1 \times V_1}{V_2} = \frac{2.00atm \times 2.00L}{5.00L} = 0.800atm[/tex]
The final pressure in the container will be the sum of the final pressures of the gases.
[tex]P = 2.40 atm + 0.800 atm = 3.20 atm[/tex]
A 3.00-L container with O₂ at 4.00 atm is connected to a 2.00-L container with Ne at 2.00 atm, resulting in a final pressure of 3.20 atm in the container.
Learn more: https://brainly.com/question/1437490
carbon reduction process is not applied for extraction of alkali metal . why ?
Answer:
The alkali metals are the highly electropositive metals. Highly electropositive metals cannot be extraction carbon reduction process, because these metals do not react with carbon
Explanation:
the basic fact that determines molecular shapes is that
Answer:
The shape of a molecule is mostly determined by repulsion among the pairs of electrons around a central atom.
Do all particles pass right through the atoms undeflected?
AnswereYs
Explanatioynt:Yes
suitable electrolytes for fuel cells
Answer:
Alkaline fuel cells use an alkaline electrolyte such as potassium hydroxide or an alkaline membrane that conducts hydroxide ions rather than protons.
Explanation:
OR USE GATORADE AND POWERADE. BE A MAN.
A chemist who frequently carries out a complex experiment is
likely to have high:
a. Precision, but low accuracy
b. Precision
c.Accuracy, but low precision
d.Accuracy
Answer:
c.
Explanation:
This is because the chemist will get the average of the experiment from multiple attempts but not precision because the experiment is complex rather than simple.
The chemist will most likely have high accuracy, but low precision. A
chemist who has been performing experiments frequently will be accurate
when taking the required measurements for the experiment due to the
frequency.
Precision however won't be affected because precision deals with how
close his results from the experiment are. The complexity of the
experiment and the different variables used makes him likely to have low
precision.
Read more on https://brainly.com/question/24396527
What’s boiling/melting point
Answer:
Melting point is the temperature at which solid and liquid phases of a substance are in equilibrium.
Boiling point is the temperature at which its vapour pressure is equal to the external pressure.
Answer:
melting point is the temperature at which a solid changes into a liquid.
boiling point, temperature at which the pressure exerted by the surroundings upon a liquid is equaled by the pressure
Explanation:
Which of the following correctly completes the statement?
Cations are always _____ than the parent atom and anions are always _____ than the parent atom.
Answer: smaller, larger
Explanation:
Cations are always {smaller} than the parent atom. Anions are always {larger} than the parent atom.
Cations are always smaller than the parent atom, and anions are always greater than the parent atom.
What is parent atom ?The term "parent atom" refers to an atom that has not yet undergone any chemical transformation. A parent atom is one that is discovered in its initial state.
Because they contain fewer electrons while maintaining the same nuclear charge, cations are always smaller than their parent atoms. Because the protons in the nucleus are holding the remaining electrons more tightly, their radii are less than those of the parent atoms. In the case of anion, this is the opposite.
Due to variations in electron-electron repulsion, the ionic radii of cations and anions are always less or bigger than the parent atom, respectively. The trends in ionic radius follow those in atomic size.
Thus, Cations are always smaller than the parent atom, and anions are always greater than the parent atom.
To learn more about parent atom, follow the link;
https://brainly.com/question/13673451
#SPJ6
