The awnser is sulfur dioxide.
The gas that is responsible for lowering the temperature is sulfur dioxide gas.
A volcanic eruption refers to the sudden escape of lava and gases from the earth's core. It usually occurs at a very high temperature. The solidification of the volcano leads to rock formation.
During a volcanic eruption, the gas that is responsible for lowering the temperature is sulfur dioxide gas.
Learn more: https://brainly.com/question/1622004
Brandon hits a golf ball with an initial velocity of 30 m/s at an angle of 30 above the horizontal. How long is it in the air?
Given :
Brandon hits a golf ball with an initial velocity of 30 m/s at an angle of 30 above the horizontal.
To Find :
How long is it in the air.
Solution :
We know, the formula of time of flight is :
[tex]T = \dfrac{2usin\ \theta}{g}\\\\T = \dfrac{2\times 30\times sin\ 30^o}{9.8}\\\\T = 3.06\ seconds[/tex]
Therefore, the ball is in air for 3.06 seconds.
One of two 25-year-old identical twins begins a trip on a spaceship traveling at 0.8 c while her twin remains on Earth. The twin on Earth tracks her twin's trip for 10 years. After ten years, what age is the twin on the spaceship according to the twin on Earth?
a. 41.7 years old.
b. 35 years old.
c. 31 years old.
d. 37.5 years old.
air is a gas and the particles can be pushed closer toegether which is called
explain an experiment of the phenomenon of rainfall
Unclear/incomplete question. However, I inferred you need an explanation of the phenomenon of rainfall.
Explanation:
Basically, the phenomenon of rainfall follows a natural cycle called the water cycle. What we call 'rainfall' occurs when water condensed (in liquid form) in the atmosphere is made to fall down on the ground as tiny droplets as a result of the forces of gravity.
The water cycle makes rainfall possible:
First, water on the earth's surface is evaporated (or is absorbed into) the atmosphere.Next, it then condensed into liquid form; which later falls to the surface to the ground again. And the process continues.A 1430 kg car speeds up from rest
to 14.0 m/s in 7.00 s. lgnoring
friction, how much power did that
require?
The power required by the car if a 1430 kg car speeds up from rest to 14.0 m/s in 7.00 s is 20020 Joules.
What is power?In science and engineering, power is the rate at which work is completed or energy is delivered. It can be expressed as the product of the work completed (W) or the energy transferred (E) divided by the time interval (t), or W/t.
A high-powered motor can complete a given amount of work quickly, or a low-powered motor can accomplish it slowly. Foot-pounds per minute, joules per second (or watts), and ergs per second are examples of units of power, which measure work (or energy) per unit of time.
Given:
A 1430 kg car speeds up from rest to 14.0 m/s in 7.00 s,
Calculate the acceleration and displacement as shown below,
[tex]v = u + at[/tex]
14 = 0 + a × 7
a = 2 m/s²
[tex]s = ut + 1/2at^2[/tex]
s = 0 + 1 / 2 × 2 × 7²
s = 49 m,
Calculate the power as shown below,
Power = 1430 × 2 × 49 / 7
Power = 20020 Joules
To know more about power:
https://brainly.com/question/13787582
#SPJ2
Bob Beamon's 1968 Olympic long jump set a world record which remains unbroken to this day. This amazing jump resulted from an initial velocity of 9.5 m/s at an angle of 40 degrees from the horizontal.
1. Calculate the initial horizontal velocity (V_ix) to two significant figures:
2. Calculate the initial vertical velocity (V_iy) to two significant figures:
3. Calculate the time needed to reach the highest point of the jump (t_1/2) to two significant figures:
4. Calculate the total time (t_TOT) needed to complete the jump to two significant figures:
5. Calculate the maximum height (h) reached during the jump to two significant figures:
6. Calculate the range (total horizontal distance) of his jump to two significant figures:
Please answer today! Thanks!
Answer:
1.) 7.3 m/s 2.) 6.1 m/s
Explanation:
To calculate the initial horizontal velocity with just degrees and velocity alone is pretty simple. The formula is Velocity*cos(degrees)
eg 9.5*cos(40)
2. To calculate the initial vertical velocity with just degrees and velocity alone is pretty simple. The formula Velocity*sin(degrees)
eg 9.5*sin(40)
Circus a path along which electric current flows how would changing the battery in a circuit from 9 V to 1.5 V most likely affect the circuit
During a hockey game, a puck is given an initial speed of 10 m/s. It slides 50 m on the horizontal ice before it stops due to friction. What is the coefficient of kinetic friction between the pick and the ice.A) 0.12B) 0.10C) 0.11D) 0.090
Answer:
The value is [tex]\mu_k = 0.102[/tex]
Explanation:
From the question we are told that
The initial speed of the pluck is [tex]u = 10 \ m/s[/tex]
The distance it slides on the horizontal ice is [tex]s = 50 \ m[/tex]
Generally from kinematic equation we have that
[tex]v^2 = u^2 + 2as[/tex]
Here v is is the final velocity and the value is 0 m/s given that the pluck came to rest, so
[tex]0^2 = 10 ^2 + 2* a * 50[/tex]
=> [tex]a = - 1 \ m/s^2[/tex]
Here the negative sign show that the pluck is decelerating
Generally the force applied on the pluck is equal to the frictional force experienced by the pluck
So
[tex]F = F_f[/tex]
=> [tex]m * a = m* g * \mu_k[/tex]
=> [tex]1 = 9.8 * \mu_k[/tex]
=> [tex]\mu_k = 0.102[/tex]
In an open circuit like the picture
A. the light bulb will produce light
B. a resistor controls the flow of current
C. the light bulb will be off
D. current will flow
In an open circuit like the picture the light bulb will be off. So, option (C) is correct.
What is electric circuit?Electric circuit is a way for current to flow through electricity. An electric circuit consists of a source of energy for the charged particles that make up the current, like a battery or generator; sources of current-using equipment, like lamps, electric motors, or computers; and the connecting wires or transmission lines.
Ohm's law and Kirchhoff's rules are two of the fundamental mathematical laws that define how electric circuits function.
In the given diagram, the circuit is open. So, no current passes through it and the light bulb will be off. Hence, option (C) is correct.
Learn more about electric circuit here:
https://brainly.com/question/29032441
#SPJ2
*
If a rock falls for 3 seconds off of a bridge, how far will the rock fall?
-30 m
-45m
-60m
-75m
Ok I am done waiting for an answer for 5 hours can somebody PLEASE PLEASE PLEASE help me TIMED ASSESMENT HERE!!!! PLEASE
A graph titled Speed as a Function of Time with horizontal axis time (seconds) and vertical axis speed (meters per second). A straight orange line labeled A starts at 0 seconds 4 meters per second and runs to 6 seconds 7 meters. A straight blue line labeled B starts at 0 seconds 4 meters and upward to 6 seconds 4 meters. A straight green line starts at 0 seconds 4 meters and runs to 4 seconds 0 meters.
Use the graph of speed versus time to answer the questions about acceleration.
Which of the cars is speeding up?
Which of the cars is slowing down?
Which of the cars is maintaining a constant speed?
Answer:
Explanation:
I'm going to assume that all the givens are in m/s. If I am correct, The orange line is speeding up. It is going from 4 m/s to 7 m/s. Its slant is from lower left to upper right. It is increasing in speed.
The green line is slowing down. It is going from 4 to 0 m/s. It's slant is from upper left to lower right.
The blue line is horizontal. It is neither slowing down or speeding up.
Answer:
sorry for being very very very late, but here is your answer)
car speed A
car slow down C
car constant speed B
hope this helped!!!!
(35) Calculate the total charge of all the electrons in a copper plate of mass 3.0g,
atomic number z = 29 and atomic mass 63.5g/mol. (Avogadro's no.- 6.02x1023
atoms, e = 1.6x10-1°C)
Given :
A copper plate of mass 3.0g.
Atomic number, z = 29.
Atomic mass, M.M = 63.5 g/mol.
Avogadro's number, [tex]N_a = 6.02\times 10^{23}\ atoms[/tex].
Charge on electron, [tex]e = 1.6\times 10^{-19}\ C[/tex].
To Find :
The total charge of all the electrons.
Solution :
Moles of copper,
[tex]m = \dfrac{3}{63.5}\ moles\\\\m = 0.047 \ moles[/tex]
Number of atoms in 0.047 moles of copper :
[tex]n = 0.047\times 6.02\times 10^{23}\\\\n = 2.83\times 10^{22} \ atoms[/tex]
Since, there are 29 electrons on each atoms.
So, total charge is :
[tex]C = 2.83\times 10^{22}\times 29\times 1.6\times 10^{-19}\ C\\\\C = 131312\ C\\\\C = 1.31 \times 10^5\ C[/tex]
Hence, this is the required solution.
what is the difference between biomass and fossil fuels main points?
Answer:
Fossil fuels release carbon dioxide into the atmosphere. Natural gas is the best fossil fuel in terms of energy output per unit of carbon dioxide emitted. Biomass is renewable because a new crop can be grown after each harvest, and biomass is a low carbon fuel. Biomass has the approximate chemical formula CHO.
Explanation:
Bonnie and Clyde are trying to steal the world's largest diamond from a 10 story
building. Bonnie needs to make a landing spot for when Clyde jumps with the
diamond. She knows they will be jumping from 58 feet. Neglecting air resistance,
what is the speed Clyde will be falling at right before hitting the ground?
Answer:
The speed Clyde will be falling at is 33.72.
A motorcycle skids for a distance of 2.0 m with the icy road pushing on its tires with force of 120 N as its
brakes are applied
What is the change in kinetic energy for the motorcycle?
Round the answer to two significant digits.
Answer:
-240
Explanation:
A motorcycle skids for a distance of 2.0 m on an icy road, then the change in kinetic energy for the motorcycle will be equal to -240 J.
What is kinetic energy?The force which a moving object has is referred to as kinetic energy in physics. It is defined as the number of effort required to propel a person of a specific mass from still to a specific velocity.
Aside from slight fluctuations in speed, your body holds onto the kinetic energy it obtains during acceleration.
When the body slows down from its present level to a condition of rest, the same quantity of energy is used.
Formally, kinetic energy is any quantity that has a gradient concerning time in the Lagrangian of a system.
As per the given information in the question,
Distance, d = 2.0 m
Friction, f = 120 N
The angle between displacement and friction force, θ = 180°
Now, the change in kinetic energy for the motorcycle = Work done by the friction.
K.E = f × d(cos θ)
= 120 (2.0 m)(cos 180°)
Δ K.E = -240 J
To know more about Kinetic energy:
https://brainly.com/question/26472013
#SPJ2
A disk rotates at a constant angular velocity of 30 degrees per second. Consider a point on the edge of the disk. Through how many degrees has it rotated after 3 seconds?
Answer:
The disk covers a rotation of 90º after 3 seconds.
Explanation:
Since the disk rotates at constant angular speed, we can determine the change in angular position ([tex]\Delta \theta[/tex]), measured in sexagesimal degrees, by the following kinematic formula:
[tex]\Delta \theta = \omega\cdot \Delta t[/tex] (1)
Where:
[tex]\omega[/tex] - Angular velocity, measured in sexagesimal degrees per second.
[tex]\Delta t[/tex] - Time, measured in seconds.
If we know that [tex]\omega= 30\,\frac{\circ}{s}[/tex] and [tex]\Delta t = 3\,s[/tex], then the change in angular position is:
[tex]\Delta \theta = \left(30\,\frac{\circ}{s} \right)\cdot (3\,s)[/tex]
[tex]\Delta \theta = 90^{\circ}[/tex]
The disk covers a rotation of 90º after 3 seconds.
Need ASAP!! An object lies motionless on a rough inclined surface .
Answer:
yes
Explanation:
yes
Answer:
that's true
Explanation:
if the rough inclined plane was rough enough than it would be true
A tennis ball moves 16 meters northward, then 22 meters southward, then 12 meters northward, and finally 32 meters southward.
Why are doorknobs placed at the edge of a door rather than in the center
Answer: so it can reach the frame
Explanation:
Answer:
To increase force on the door
A 300 kg piano needs to be moved to the other side of the room. The maximum static frictional force is equal to 90 N and the kinetic frictional force is equal to 70 N. Calculate the acceleration of the piano for an applied force of 100 N.
Answer:
a = 0.1 m/s²
Explanation:
If the maximum static frictional force is 90 N, this means that any applied force that will overcome this force, will cause the piano to slide, so kinetic frictional force applies.Under these conditions, the net force in the horizontal direction is just the difference between the applied force (which is larger that the static friction force) and the kinetic frictional force, as follows:[tex]F_{net} = F_{app} -F_{frk} = 100 N - 70 N = 30 N (1)[/tex]
By the same token, according Newton's 2nd Law, this force is just equal to the product of the mass of the piano, times the acceleration, as follows:[tex]F_{net} = m* a = 300 Kg * a = 30 N (2)[/tex]
Solving for a:[tex]a = \frac{F_{net}}{m} = \frac{30 N}{300kg} = 0.1 m/s2 (3)[/tex]
When will the Social Security fund dry up at its current level?
A.
2022
B.
2027
C.
2042
D.
2097
E.
2117
Answer:
C. 2042
Explanation:
trust me I know the answer
In 2042 the Social Security fund will dry up at its current level. The correct option is C.
The answer is not entirely clear, as projections can vary depending on various economic and demographic factors. However, based on the 2021 Social Security Trustees Report, the projected depletion date for the Social Security Trust Fund is 2034. This means that at the current rate of payouts and contributions, the Trust Fund will only be able to pay out about 78% of scheduled benefits after 2034.
Therefore, the closest option to the projected depletion date of the Social Security Trust Fund is C. 2042. However, it is important to note that this projection may change as economic and demographic factors change over time.
To learn about social security benefits click:
https://brainly.com/question/30746058
#SPJ7
g You heard the sound of a distant explosion (3.50 A/10) seconds after you saw it happen. If the temperature of the air is (15.0 B) oC, how far were you from the site of the explosion
Answer:
The answer is "1557 meters".
Explanation:
speed of sound in ([tex]\frac{m}{s}[/tex]) [tex]= 331.5 + 0.60 \ T^{\circ}\ C\\\\[/tex]
[tex]\to V = 331.5 + 0.6 \times 24 = 346 \frac{m}{s}\\\\\to t = 4.5 \ seconds \\\\\to S = vt = 346 \times 4.5 = 1557 \ meters[/tex]
A truck pushes a pile of dirt horizontally on a frictionless road with a net force of
20
N
20N20, start text, N, end text for
15.0
m
15.0m15, point, 0, start text, m, end text.
How much kinetic energy does the dirt gain?
Answer:
300 JoulesExplanation:
This is a common question on Khan Academy's "Calculating change in kinetic energy from a force" practice exercises. (AP Physics 1)
The simplest method to use is the following: [tex]W = F * d * cos(theta)[/tex], where W represents work (joules), F represents force (newtons), d represents distance (meters), and theta represents the angle of the force that's being applied.In this scenario, the force being applied is horizontal, so we can remove the [tex]cos(theta)[/tex] from our equation.So, our equation is now: [tex]W = F * d[/tex]. This would mean that [tex]W = 20 * 15[/tex], which is equal to [tex]300[/tex]. Our answer is 300 joules. (this value is positive and not negative because kinetic energy is being GAINED, not LOST)Here's the real question without all the formatting:
A truck pushes a pile of dirt horizontally on a frictionless road with a net force of 20 N for 15.0 m. How much kinetic energy does the dirt gain?A truck pushes a pile of dirt in the horizontal direction with a force of 20 N to a distance of 15 m then the kinetic energy of the dirt is 300 J.
What is work?In physics, the term "work" refers to the measurement of energy transfer that takes place when an item is moved over a distance by an externally applied, at least a portion of which is applied inside the direction of the displacement.
The duration of the path is multiplied by the component of a force acting along the path to calculate work if the forces are constant. The work W is theoretically equivalent to the pressure f times the range d, or W = fd, to represent this idea. Work is done when a force is applied at an angle of to a displacement, or W = fd cos.
The work done, [tex]W = Force * Displacement[/tex]
W = 15× 20
W = 300 J
To know more about Work:
https://brainly.com/question/18094932
#SPJ3
When a object is electrically charged, ____ have been added or removed.
A) Neutrons
B) Electrons
C)Protons
Answer:
B, electrons.
Explanation:
An electrical charge is created when electrons are transferred to or removed from an object. Because electrons have a negative charge, when they are added to an object, it becomes negatively charged. When electrons are removed from an object, it becomes positively charged.
A car jack works when a mechanic uses a force 3.8 N, on a small piston of radius 10 cm. What force can he exert on a larger piston of radius 0.22 m?
Answer:
18.392 N
Explanation:
Given that,
Smaller force acting on the car, F₁ = 3.8 N
Radius of smaller radius, r₁ = 10 cm = 0.1 m
The radius of the larger piston, r₂ = 0.22 m
We need to find the force exerted on the larger piston. Let it is F₂.
Using the relation,
[tex]\dfrac{F_1}{F_2}=\dfrac{A_1}{A_2}\\\\\dfrac{F_1}{F_2}=\dfrac{\pi r_1^2}{\pi r_2^2}\\\\\dfrac{F_1}{F_2}=\dfrac{r_1^2}{r_2^2}\\\\F_2=\dfrac{F_1r_2^2}{r_1^2}\\\\F_2=\dfrac{3.8\times (0.22)^2}{(0.1)^2}\\\\F_2=18.392\ N[/tex]
Hence, the force exerted on the larger piston is 18.392 N.
What are Newton’s 3 laws of motion?
Answer: It states that for every action, there is an equal and opposite reaction.
I hope this helps, and Happy Holidays! :)
What is the steady state rate of heat flow through a pane of glass that is 40.0 cm by 30.0 cm with a thickness of 4.00 mm when the outside temperature of the glass is −10.0℃ and its inside temperature is 25.0℃? The thermal conductivity of glass is 0.105 W/(m⋅K); the specific heat of glass is 0.180 cal/(g⋅℃); and 1 cal = 4.190 J.
Answer:
110.25 watt/s
Explanation:
The rate of heat transfer is given by the formula
R = k*A(T1 - T2) / d, where
k = thermal conductivity, 0.105 (W/(m*K)
d = thickness, 4 mm = 0.004 m
T1 = inside temperature, 25° C
T2 = outside temperatures, -10° C
A = area 0.3 * 0.4 = 0.12 m²
Now, applying the given data to the formula, we have
Rate = 0.105 * 0.12 (25 - -10) / 0.004
Rate = 0.105 * 0.12(35) / 0.004
Rate = 0.105 * 4.2 / 0.004
Rate = 0.441 / 0.004
Rate = 110.25 Watt/s
Therefore, the steady state rate of heat flow is 110.25 watt/s
Can I get help on this question please
it would be the 3rd one. so C
WILL MARK BRAINLIEST JUST PLEASE HELP
Answer:
40N in either direction is the answer
Which of the factors below is NOT critical in developing good physical fitness? *
environment
behavior
age
heredity
Answer: Age
Explanation:
Physical fitness has to do with the effective and efficient working of the body system which allows individuals to be healthy.
The factors that are critical in developing good physical fitness include the environment, the behavior of the individual and heredity. To maintain physical fitness, one should exercise, eat healthy, avoid smoking etc. Age is not a factor in physical fitness.
