Answer:
A D F
Explanation:
look at attachment if you don't believe me
Marble chips react with dilute hydrochloric acid to produce carbon dioxide gas. The rate of this reaction can be changed by changing the size of marble chips.
Describe experiments to investigate what effect using smaller marble chips has on the rate of this reaction.
Answer:
See explanation
Explanation:
We know that surface area is an important determinant factor in the study of reaction rate. This is the reason why finely divided marble chips react faster than lumps of marble in the reaction between marble chips and dilute HCl.
Now imagine that i have a lump of marble and i have finely divided marble. Then i also have a solution of 0.5 M dilute HCl. If i introduce 1g of the lump of marble into 250 ml solution of the 0.5 M HCl in one beaker and introduce 1g of finely divided marble into another 250 ml solution of 0.5 M HCl in a separate beaker, we will notice that the finely divided marble chips reacts faster as evidenced by the quicker effervescence of CO2 gas from the later compared to the former.
Hence, smaller marble chips reacts faster with dilute HCl than a lump of marble.
Answer:
yes the above given answer is absolutely correct I agree with u man on the above.
The complete combustion of acetic acid, HC2H3O2(I) to form water, H2O(I), and CO2(g), at constant pressure releases 871.7 kJ of heat per mol of acetic acid.
Write a balanced thermochemical equation if 5.0g of acetic acid will be used in the reaction.
HC2H3O2(I) + O2 --- H2O(I) + CO2(g) H= -871.7 kJ
Answer:
HC2H3O2(I) + O2(g) ---> H2O(I) + CO2(g) ΔH= -72.35 kJ
Explanation:
We know that 5.0 g of acetic acid will contain, 5.0g/60 g/mol = 0.083 moles of acetic acid
Now from the reaction equation;
1 mole of acetic acid evolved -871.7 KJ of heat
0.083 moles of acetic acid will evolve 0.083 * -871.7 = -72.35 KJ
For 5.0 g of acetic acid, we can write;
HC2H3O2(I) + O2(g) ---> H2O(I) + CO2(g) ΔH= -72.35 kJ
C3Hg + 02 → CO2 + H2O
This chemical equation represents the combustion of propane. When correctly balanced, the coefficient for water
is
16.
2.
8.
4.
Answer:
4
Explanation:
The following equation, which depicts the combustion of propane, is given in this question as follows:
C3H8 + 02 → CO2 + H2O
However, this equation is not yet BALANCED because the number of atoms of each element is not the same on the reactant and product side. To balance the equation, we make use of COEFFICIENT to ensure that the number of atoms of each element on both side correlates.
The balanced equation is as follows:
C3H8 + 502 → 3CO2 + 4H2O
Therefore, the coefficient for water (H2O) after balancing the equation is 4.
The study of chemicals is called chemistry.
The correct answer is D.
The equation is not yet BALANCED because the number of atoms of each element is not the same on the reactant and product sides.
To balance the equation, we make use of COEFFICIENT to ensure that the number of atoms of each element on both sides correlates.
After balancing the equation is as follows:
[tex]C_3H_8 + 50_2 → 3CO_2 + 4H_2O[/tex]
Hence, the correct answer is 4 which shows the balanced water.
For more information, refer to the link:-
https://brainly.com/question/12985618
would using a strainer be filtration?
Answer:
To some extent, yes
Explanation:
10. There are two bears that both have the same proteins for ear shape in their cells. The bears have
different parents. What can you say about the bears' ear shape?
Answer:
They will have the same ear shape since their proteins connect in the same ways to determine ear shape.
Explanation:
I majored in Chemistry
Answer:
They will have the same ear shape since their proteins connect in the same ways to determine ear shape.
Explanation:
Predictions about the future based on the position of planets is an example of physics biology earth science pseudoscience
Answer:
Pseudoscience
Explanation:
Predicting the future based solely on the position of the planets is an example of pseudoscience.
Pseudoscience is a body of knowledge that is not based on the scientific method but on some unverifiable/unprovable claims.
Predictions about the future can only be valid if it is based on the scientific method, not just about the position of the planet. The scientific method involves observation, hypothesis formulation, testing of the hypothesis through repeatable experiments, and arriving at conclusion.
Any other statement or belief that is not based on these procedures is said to be pseudoscientific.
Answer:
The answer to your question is pseudoscience.
Explanation:
I took the module 1 exam and got it right, yesterday.
Is water a reactant or product?
Answer: Reactant
Explanation:
In simple wording, Water act as a reactant and it broke or we can say split the larger molecule in the smaller ones, The H and OH bonds are attached to the two products that are formed after the reaction. Another process in which water is used as an important reactant is photosynthesis.
Which ion forms the strongest ionic bond with a given anion?
Answer:
Explanation:
A cation with a 2+ charge will make a stronger ionic bond than a cation with a 1+ charge. A larger ion makes a weaker ionic bond because of the greater distance between its electrons and the nucleus of the oppositely charged ion.
Low, gray, layered clouds that cover the sky and bring steady rain are O A. cumulus O B. cirrus O C. cumulonimbus OD. nimbostratus
Answer:
D Nimbostratus
Explanation:
3. All the deer in Horry County represent which of the following?
species
biome
population
community
Answer:
community
Explanation:
Answer:
The correct answer is population. I took the test and got it right.
You need to make an aqueous solution of 0.150 M sodium fluoride for an experiment in lab, using a 500 mL volumetric flask. How much solid sodium fluoride should you add?
Answer:
Explanation:
Solution required is .15 M 500 mL sodium fluoride .
molecular weight of sodium fluoride = 42
one mole of sodium fluoride = 42 grams
No of moles contained in the solution of .15M , 500 mL solution
= .15 x 0.5 moles = .075 moles
1 mole = 42 g
.075 moles = .075 x 42 = 3.15 grams .
So mass of sodium fluoride required = 3.15 g .
36.0 g of Be contains how many moles?
Answer:
Explanation:
4
1. Which of these is NOT found in the nucleus of an atom?
neutrons
protons
electrons
the mass of the atom
Answer:
Electrons
Explanation:
Answer:
Electrons are not found in the nucleus for they are orbiting the atom.
What is the charge of an electron?
A-negative
B-neutral
C-positive
D-none of these
How many grams of NH3 are needed to make 2.50 moles of (NH4)2SO4?
2 NH3(g) + H2SO4(aq) --> (NH4)2SO4(aq)
Answer:
85.155g NH3
Explanation:
6.900x10^10 ÷ 4.000x10^8
Answer:
1.725e+18
Explanation:
How do I balance "Lithium hydroxide + hydrogen acetate --> lithium acetate + water"
Answer:
LiOH+CH3COOH=C2H3LiO2+H2O balanced equation
Explanation:
lithium hydroxide-> LiOH
hydrogen acetate->CH3COOH
lithium acetate->C2H3LiO2
water->H2O
LiOH+CH3COOH=C2H3LiO2+H2O
Li=1,O=3,H=5,C=2 --> Li=1,O=3,H=5,C=2
the two sides have same numbers so it is balanced.
3. A sample of neon gas has a volume of 1.2 L at 28.5°C. What will the volume be at 125°C it the
pressure remains constant?
Answer:
1.58L
Explanation:
Given parameters:
Initial volume = 1.2L
Initial temperature = 28.5°C = 28.5 + 273 = 301.5K
Final temperature = 125°C = 125 + 273 = 398K
Unknown:
New volume = ?
Solution:
Volume and temperature relationship is resolved using the Charles's law.
The law states that "the volume of a fixed mass of a gas varies directly as its absolute temperature if the the pressure is constant".
So;
[tex]\frac{V1}{T1}[/tex] = [tex]\frac{V2}{T2}[/tex]
V1 is the initial volume
T1 is the initial temperature
V2 is the new volume
T2 is the new temperature
[tex]\frac{1.2}{301.5}[/tex] = [tex]\frac{V2}{398}[/tex]
301.5V2 = 477.6
V2 = 1.58L
How does adaption allow mice with the mutation to survive better in some areas
Answer: Mutations can cause instant adaptations, while natural selection is the process by which adaptations occurs over a series of generations. Adaptations are changes or processes of changes by which an organism or species becomes better suited for its environment. A mutation is an alteration of the DNA sequence.
Do the following ! I'LL MARK THE BRAINLEST!
ITS SCIENCE!
Answer:
it's easier to look it up
Explanation:
Identify the reaction type shown and describe the clues that were used to identify it.
NH4NO3 → N2O + 2H2O
Answer:
This chemical equation represents a decomposition reaction. This identification is based on the fact that the single reactant chemical compound breaks down into two different chemical substances that are different from the initial chemical substance.
Explanation:
it was the sample response lol
A reactant is broken down into two or more products in the decomposition reaction. The given reaction is a decomposition reaction.
Decomposition reaction:
In this type of chemical reaction, a reactant is broken down into two or more products.
For example- Ammonium nitrate is broken down into nitrous oxide and water molecules.
[tex]\bold {NH_4NO_3 \rightarrow N_2O + 2H_2O}[/tex]
Therefore, the given reaction is a decomposition reaction.
To know more about Decomposition reaction:
https://brainly.com/question/24936069
why do astronauts on the moon seem like they're "Walking on springs" while on earth we are firmly attached to the ground
Base changes phenolphthalein to pink it is true or false
Answer:
It’s false
Explanation:
it could be true if the question mentioned alkaline solution
Answer:
True
Explanation:
Phenolphthalein is colorless in the presence of an acid and turns pink in the presence of a base.
How many molecules are in 2.91 X 1022 atoms of He
Answer:
Explanation:
1 mole of oranges contains 6.02 x1023 oranges. 1 mole of helium gas contains 6.02 x1023 helium atoms. 1 mole of water contains 6.02 x1023 water molecules.
...
Answer:
25194.56
Explanation:
You'll need a scientifuc calculator
2.91*10^22*1 = 2.91E22
2.91E22-/6.02*10^23=25194.56
6.02*10^22 Is the Mole number
What is the volume of 4.78g of O2 gas at STP?
Answer:
Explanation:
The trick here is to realize that if you know the volume of a gas at STP, you can use the fact that
1
mole of any ideal gas occupies
22.7 L
under STP conditions to calculate how many moles of gas you have in your sample.
Under STP conditions:
1 mole of an ideal gas = 22.7 L
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
In your case, you know that your sample of gas occupies
2.28 L
under STP conditions, which are currently defined as a pressure of
100 kPa
and a temperature of
0
∘
C
.
This means that your sample will contain
2.28
L
⋅
molar volume of a gas at STP
1 mole gas
22.7
L
=
0.10044 moles gas
Now, the molar mass of the gas is the mass of exactly
1
mole of the gas. In your case, you know that you get
3.78 g
for every
0.10044
moles, which means that you have
1
mole
⋅
3.78 g
0.10044
moles
=
37.6 g
Since this is the mass of
1
mole of gas, you can say that the molar mass of the gas is
molar mass = 37.6 g mol
−
1
−−−−−−−−−−−−−−−−−−−−−−−
Consider the double replacement reaction given below: HgNO3(aq) + KBr(aq) → HgBr (??) + KNO3(??)The state of matter for HgBr would be
Answer: The state of maater for HgBr is solid.
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.
The balanced chemical equation is:
[tex]HgNO_3(aq)+KBr(aq)\rightarrow HgBr(s)+KNO_3(aq)[/tex]
An object has a volume of 825 cm3 and a density of 13.6 g/cm3. Find its
mass
The mass of an object is the product of its volume and density. The mass of a the object with a volume of 825 cm³ and a density of 13.6 g/cm³ is 11220 g.
What is density ?Density of substance is the measure of its mass per unit volume. It describes how closely its particles are packed. Density depends on the bond type, temperature and pressure.
Volume of the object is the space occupied by its particles. Volume can be expressed in L, ml, cm³, dm³ etc. Only solids and liquids has a definite volume and the volume of gases is that of the container.
Give that, volume of the object = 825 cm³
density = 13.6 g/cm³
Mass = volume × density
m = 825 cm³ × 13.6 g/cm³ = 11220 g
Therefore, the mass of the object is 11220 g.
Find more on density:
https://brainly.com/question/15164682
#SPJ2
show how to work out...Calculate the mass in grams of 3.50 x 1025 atoms of lithium. Answer: 404g Li
The nucleus of a fluorine atom has a charge of?
A. +19
B. 0
C. +9
D. +1
Answer: B
Explanation: A fluorine atom has nine protons and nine electrons, so it is electrically neutral. (neutral =0)
The nucleus of a fluorine atom has a charge of zero as the atom has equal number of positive and negative charges.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/29695801
#SPJ6
How many gallons of water would be in a container that is 256 millimeters X 20 inches X.045 meter.