Which statements describe a good hypothesis? Check all that apply.
A good hypothesis is based on one's personal opinion.
A good hypothesis can be tested.
A good hypothesis leads to a test with measureable results.
A good hypothesis does not always have to be based on prior knowledge or research.
A good hypothesis provides a possible explanation to answer a scientific question.

Answers

Answer 1

Answer:

- A good hypothesis can be tested.

- A good hypothesis provides a possible explanation to answer a scientific question.

- A good hypothesis does not always have to be based on prior knowledge or research.

Explanation:

The reason being because hypothesis are questions asked before the experiment. They usually involve the testable question and the experiment answers it, but not always. A good hypothesis doesn't need to have accurate results.

Answer 2

Answer:B : A good hypothesis can be tested. C:A good hypothesis leads to a test with measurable results. E: A good hypothesis provides a possible explanation to an answer a scientific question ( B, C, E)

Explanation:Just took the (Assignment) quiz


Related Questions

List the metals Mg, Cu, Au, Na and Al in the decreasing order of their reactivity with air.

Answers

Answer:

Na is most reactiveAlcuAu is less reactiveIN HERE

Answer:

Potassium  (K)

Sodium  (Na)    

Calcium  (Ca)

Magnesium (Mg)  

Aluminium  (Al)

Iron  (Fe)  

Lead  (Pb)

Copper  (Cu)  

Silver  (Ag)

Gold  (Au)

the overall take away of an experiment’s results is the______. A. hypothesis B. introduction C. conclusion

Answers

Answer:

conclusion

Explanation:

it can't be a hypothesis since tests are carried out to verify so it is not a theory

an introduction to an experiment only gives the basis of what we are investigating therefore nothing has been proven and the question is still unanswered

The overall takeaway of an experiment’s results is the conclusion. Hence, option C is correct.

What is a hypothesis?

A hypothesis is a testable statement about the relationship between two or more variables or a proposed explanation for some observed experiment.

The overall takeaway of an experiment’s results can't be a hypothesis since tests are carried out to verify so it is not a theory

An experiment only gives an idea about the investigation therefore nothing has been proven and the question is still unanswered.

Hence, the overall takeaway of an experiment’s results is the conclusion.

Learn more about the hypothesis here:

brainly.com/question/5177511

#SPJ5

Explain how the energy of a toy car is transformed as it slides down a ramp. Give evidence that the energy of the car remains the same at all points on the ramp. (30 points)

Answers

Answer:

As the car starts to slide down the ramp, it is kinetic energy and when it's on the top of the ramp,  it is potential energy. We can see that the energy is now being transferred through the car and ramp.

I'll GIVE BRAINLIEST: In a redox reaction, CO is changed to CO2. How many electrons must be lost or gained by C and why?

Answers

Answer:

C is gaining 2 electrons

Explanation:

O has a 2- charge so for CO to pick up another O atom would add 2 more electrons.

Answer:

C gains 2 electrons

Explanation:

In the redox reaction, CO is changed into CO2 which means there is an additional oxygen. Oxygen loses 2 of its electrons in order to neutralize. So, C must be gaining 2 electrons in order to make the bond.

A sample of copper is heated to 100°C and placed into a calorimeter containing 50 g of water at 25°C after a few minutes the final temperature of the system reaches 40°C how much heat in joules was released by the copper Sample

Answers

Answer:

Heat = 3138J

Explanation:

In the system, the sample of Copper is releasing heat that produce the increasing in the temperature of water.

Using the equation of calorimeter, we can find the heat released for the sample of copper (The same that is absorbed for the water):

Q = C×m×ΔT

Where Q is heat, C is specific heat (For water: 4.184J/molK), m is the mass of water (50g) and ΔT is change in temperature of water (40°C-25°C = 15°C)

Replacing:

Q = 4.184J/molK×50g×15°C

Q = 3138J is the heat released for the sample of Copper (The same absorbed for the water).

Answer:

heat=3138j

Explanation:

In the system, the sample of Copper is releasing heat that produce the increasing in the temperature of water.

Using the equation of calorimeter, we can find the heat released for the sample of copper (The same that is absorbed for the water):

Q = C×m×ΔT

Where Q is heat, C is specific heat (For water: 4.184J/molK), m is the mass of water (50g) and ΔT is change in temperature of water (40°C-25°C = 15°C)

Replacing:

Q = 4.184J/molK×50g×15°C

Q = 3138J is the heat released for the sample of Copper (The same absorbed for the water).

What would be the pH of an HNO3 solution if the [H+] = 3.26 x 10-6 moles/liter? 5.49 4.67 6.32

Answers

Answer:

5.49

Explanation:

pH = - log[3.26 x 10-6] =5.49

Ytu perform an electrolysis reaction using FeCl, iron (1) chloride. Which of the following will happen?
A. Chlorine will move to the positive electrode and become reduced.
B. Iron will move to the positive electrode and become oxidized.
C. Chlorine will move to the negative electrode and become oxidized.
D. Iron will move to the negative electrode and become reduced.

Answers

Answer:

The answer is "Option B"

Explanation:

when we react with FeCl, iron, and chloride to both the electrolysis. So, iron is charged positive ion, as well as passes to the negative, is cathode electrode. But there is a decrease in the cathode.

The equation can be defined as follows:

[tex]FeCl_2[/tex] [tex]\longrightarrow[/tex][tex]Fe + Cl_2[/tex]

In the above equation, when the iron chloride electrolysis solution, it will give the iron(II) and the chlorine. This process happens when the hydrogen chloride solution at a temperature of about 90 ° C.

Answer: D

Explanation: As Fe is positive charged while chlorine is negative charged.

(D) is correct. As iron moves to negative and it get reduce as negative electrode is cathode

How can you use the scientific method in everyday life?

Answers

You can use the scientific method everyday by asking questions and doing experiments. For example, you want to know how a fire starts, so you do an experiment with it!

anyone knows how to do this-

Answers

Explanation:

The number of protons in the element C^12 (Carbon) is 6, number of electrons 12 and number of Neutrons is 6, same as the number of protons it contains

C^13 has 13 electrons, 6 protons and 7 Neutrons this one's neutron number is different from proton number because it's an isotope

Na^-1 has gained an electron so the number of electrons it has = 24 and the number of protons shown as 11 which means there are 23 - 11 = 12 Neutrons

O^-2 has gained two electrons and got 18 electrons in total, 8 protons and 8 neutrons

calculate the weight of 3.491 into 10 to the power 19 molecules of cl2​

Answers

Answer:

The mass of 3.491 × 10¹⁹ molecules of Cl₂  of Cl₂ is 4.11 × 10⁻³ grams

Explanation:

The number of particles in one mole of a substance id=s given by the Avogadro's number which is approximately 6.023 × 10²³ particles

Therefore, we have;

One mole of Cl₂ gas, which is a compound, contains 6.023 × 10²³ individual molecules of Cl₂

3.491 × 10¹⁹ molecules of Cl₂ is equivalent to (3.491 × 10¹⁹)/(6.023 × 10²³) = 5.796 × 10⁻⁵ moles of Cl₂

The mass of one mole of Cl₂ = 70.906 g/mol

The mass of 5.796 × 10⁻⁵ moles of Cl₂ = 70.906 × 5.796 × 10^(-5) = 4.11 × 10⁻³ grams

Therefore;

The mass of 3.491 × 10¹⁹ molecules of Cl₂  of Cl₂ = 4.11 × 10⁻³ grams.

Plz help me...!!! I need this answer by today!....

What is the weight of a 98 kg astronaut on the Mars where the value of the gravitational pull is 3.711 m/s2?
What is his mass on earth? What is his weight on Venus where the gravitational pull is 8.87 m/s2?


Answers

Answer:

Explanation:

given mass on earth =98 kg

gravitational pull on mars =3.711 m/s2

gravitational pull on venus =8.87 m/s2

weight of the body on mars =weight on earth/9.81 m/s2 *3.711 m/s2

W=98 kg*3.711 /9.81m/s2

W=37.07 kg

weight on the venus =weight on earth*8.87 m/s2 /9.81 m/s2

W= 98 kg*7.87 m/s2/9.81 m/s2

W=78.62 kg

Ou Esaplain different form
of oxygen?​

Answers

Answer:

oxygen is the chemical element with the atomic number is 8 and the symbol is o its known as called oxygen.

Explanation:

Oxygen is the most third element in the universe at they standard and temperature and pressure,and oxides most elements as other compounds.

Oxygen gas is the earth atmosphere is 21%, an oxygen is the half of the earth crust in form of oxide,oxygen is liquid and solid gas.

Oxygen atoms such as proteins and acids, fats the major organic compounds, oxygen as component of the water and carbon dioxide.

Oxygen has many characteristics :- properties and molecular structure:-

this  is a pressure and temperature  with molecular formula referred as oxygen,simply describe a double bond and molecular orbits.

Physical properties:- oxygen is highly substance and must be combustible materials, oxygen may also from using a liquid nitrogen coolant, molecular oxygen is the associated with the process of air glow.

Stellar origin :- all of the remaining to half lives to the majority of are less then milliseconds.

Occurrence:- oxygen is the process part of the element in the earth crust, free oxygen is also occurs in the world bodies.

Analysis :- analysis to the structure of vegetation and the carbon cycle on a global scale.

HELP!!!!!!, I need this urgently!!!
Compare the properties of producer and water gas​

Answers

Answer:

Producer gas and water gas contain carbon monoxide and hydrogen.

how will you measure the length of a curved line by using a thread? ​

Answers

A curved line or surface cannot be measured by a straight scale, a measuring tape or thread must be used instead.To measure a curved line using a thread, follow the below steps:

Tie a knot at one end of the thread.
Place the thread at the beginning of the line and try to measure a small initial portion of the line which is relatively straight.
Place your thumb at the other end of the measured portion and measure next straighter portion.
Repeat the above step till the end of line is reached. Make a knot at the end of the line.
Now, straighten the thread and measure the length of the two knots on a scale.

calculate the pH of 500cm3 of 0.2mol/dm3 Ca(OH2), assume complete ionisation​

Answers

Answer:

The pH of 500 cm³, 0.2 mol/dm³, Ca(OH₂) is ≈ 13.6

Explanation:

The given parameters are;

Concentration of the calcium hydroxide, Ca(OH₂) = 0.2 mol/dm³

Volume of the calcium hydroxide, Ca(OH₂) = 500 cm³

Given that the calcium hydroxide, Ca(OH₂),  undergoes complete ionization in water, complete dissociation, we have;

Ca(OH₂)  ⇄  Ca²⁺ + 2 OH⁻

Therefore, we have;

2 moles of [OH⁻] for each mole of Ca(OH₂) which gives the concentration of  [OH⁻] as

[OH⁻] = 2 × 0.2 ≈ 0.4 mol/dm³

The pH is given by the formula

pH = 14 + ㏒₁₀ [OH⁻]

pH = 14 + ㏒₁₀ (0.4) = 14 - 0.3979 = 13.6021 ≈ 13.6

The pH of the 500 cm³ 0.2 mol/dm³ Ca(OH₂) ≈ 13.6.

Match the set of measurements of the boiling point of water with the best

description.

Measurements

Description

6. 103 °C, 90 °C, 101 °C

a.

Precise

7. 100 °C, 99 °C, 100 °C

b.

Accurate

8. 105 °C, 106 °C, 105 °C

c. Both accurate and precise

9. 99 °C, 101 °C, 100 °C

d. Neither accurate nor precise

Answers

Answer:

Matching

6.D

7.A

8.C

9.B

Explanation:

Took test

103 °C, 90 °C, 101 °C Neither accurate nor precise, 100 °C, 99 °C, 100 °C are Precise, 105 °C, 106 °C, 105 °C are Both accurate and precise, 99 °C, 101 °C, 100 °C are Accurate. These are the correct set of measurements of the boiling point of water.

what are  boiling point and melting point ?

The melting point is defined as the temperature at which solid and liquid phases are at equilibrium state, whereas the boiling point is defined as the temperature at which the pressure of a vapor of a  liquid is equal to the external pressure.

Melting point in which the melting of solid occur to become a liquid at a given temperature, here the molecules gain enough amount of kinetic energy to get the intermolecular forces to convert into another form.

In case of Boiling point the liquid phase enters into the gaseous phase, when the external pressure is high than a temperature for the vapor pressure equal to the external pressure.

Learn more about boiling point, here:

brainly.com/question/28203474

#SPJ2

An element’s most stable ion forms an ionic compound with bromine, having the formula XBr2. If the ion of element "X" has a mass number of 230 and has 86 electrons, what is the identity of the element, and how many neutrons does it have?

Answers

Answer:

88

Explanation:

The ion has a charge of 2+, therefore the number of neutrons it possess is 86+2

which equals 88

The element X having a mass number of 230 and has 86 electrons is radium and has  142 neutrons.

An atom is composed basically of electrons, protons and neutrons. In a neutral atom, the number of protons and electrons are equal. The number of neutrons is the difference between the mass number and the number of protons (atomic number).

Since we know that the ion of the element X has 86 electrons and the compound formed is XBr2, it then means that neutral X has 88 electrons.

The number of electrons in the neutral atom is the same as the number of protons or atomic number. An element can be identified by its atomic number. The element having atomic number 88 is radium.

The number of neutrons is obtained as;

Mass number - atomic number

230 - 88 = 142 neutrons

Learn more: https://brainly.com/question/803445

If you are designing an experiment, how will you determine your independent or dependent variable?

Answers

Answer:

The independent variable effects the dependent variable.

Explanation:

The independent variable Is what you change whereas the dependent variable would change because of that.

for example, the indipendent variable could be how much you water a plant in ml each day, and the dependent variable would be how tall each plant grown]s with that water doseage per day.

Propane (C3H8), a common fuel, reacts with oxygen to form carbon dioxide and water according to the equation below: C3H8 + 5O2 → 3CO2 + 4H2O If a propane heater burns 38.95 g C3H8, it consumes

Answers

Answer:

0.8833 mole of C3H8

Explanation:

Given:

Mass of C₃H₈ (Propane) = 38.95 gram

Computation:

Molar mass of C = 12.01

Molar mass of H = 1.008

Molar mass of C₃H₈ (Propane) = 3(12.01) + 8(1.008)

Molar mass of C₃H₈ (Propane) = 36.03 + 8.064

Molar mass of C₃H₈ (Propane) = 44.094

Number of mol in 38.95 gram Propane = Mass / Molar mass

Number of mol in 38.95 gram Propane = 38.95 / 44.094

Number of mol in 38.95 gram Propane = 0.88334

Answer:

Use the Periodic Table to find molar masses.

Propane (C3H8), a common fuel, reacts with oxygen to form carbon dioxide and water according to the equation below:

C3H8 + 5O2 → 3CO2 + 4H2O

If a propane heater burns 38.95 g C3H8, it consumes

38.95 mol C3H8.

0.8830 mol C3H8.

1 mol C3H8.

44.10 mol C3H8.

Part 2

How many moles of oxygen are required to produce 37.15 g CO2?

37.15 g CO2 = 1.407 mol O2

Part 3

What mass of propane is necessary to react with the amount of oxygen calculated in the previous question?

12.41   g C3H8    

The substances are placed in separate containers at room temperature, and each container is gradually cooled. Which of these substances will solidify before the temperature reaches 0°C? benzene water butane nitrogen

Answers

Answer:

Benzene

Explanation:

You have to find the freezing point for each of these (make sure they're in Celsius). You might want to double check these but:

Benzene: 5.5

Water: 0

Butane: -138

Nitrogen: -210

The substances that will solidify before the temperature reaches 0°C is benzene. The correct option is A.

What is freezing point?

Freezing, also known as solidification, is a phase transition that occurs when the temperature of a liquid falls below its freezing point.

If the intermolecular forces between its molecules are strong, the freezing point is high.

When the forces are weak, the freezing point is low. The freezing point of a liquid or the melting point of a solid occurs when the solid and liquid phases are in equilibrium.

Pure benzene has a freezing point of 5.48 degrees Celsius. Because of the salt in it, fresh water freezes at 32 degrees Fahrenheit, but seawater freezes at around 28.4 degrees Fahrenheit.

Thus, as per the given scenario, the correct option is A.

For more details regarding freezing, visit:

https://brainly.com/question/3121416

#SPJ2

3.7500 x 104 + 9.7100 x 105

Answers

Answer: [tex]1409.55[/tex]

Remove the 0's from each decimal number

[tex]3.7500 ---> 3.75\\9.7100 ---> 9.71[/tex]

Multiply

[tex]3.75*104=390\\9.71*105=1019.55[/tex]

Add

[tex]930+1019.55=1409.55[/tex]

If an object's mass is 70 g, and its volume is 10cm cubed, what is its density?

Answers

The answer is 7,000

If an object's mass is 70 g, and its volume is 10cm cubed,  its density is 7 centimeter cube.

What is density?

The density of any solid substance is the unit of the area occupied by it in per centimeter of the cube of the volume in the given sample and calculated by dividing the mass and the volume of the compound unit will be centimeter cube.

The mass of the given object is 70 gram and the volume is given is 10 cm to find the density,

                       Density = mass of object / volume of object

substituting the value in the formula,

                 Density = 70 / 10

                 Density = 7 centimeter cube.

Therefore, the density of the given object will be 7 centimeter cube if  an object's mass is 70 g, and its volume is 10cm cubed.

Learn more about density, here:

https://brainly.com/question/15164682

#SPJ2

Which of the following elements has a complete outer shell of electrons? A. Iron (Fe) B. Hydrogen (H) C. Neon (Ne) D. Nitrogen (N)

Answers

Answer:

The answer is Neon

Answer:

neon

Explanation:

neon has a complete outer 2n shell

how many oxygen atoms are in 7.25g of calcium nitrate

Answers

Answer:

The answer to this question is approximately equal to 1.6 ×

[tex] 1.6 \times {10}^{23} atom \: o[/tex]

HELPPPP Name the three states of matter. Describe the arrangement and movement of atoms in a substance for each state.

Answers

Solid, Liquid, and Gas

Solid is the state in which matter maintains a fixed volume and shape; liquid is the state in which matter adapts to the shape of its container but varies only slightly in volume; and gas is the state in which matter expands to occupy the volume and shape of its container.

The states of matter are solid, liquid, and gas. Solid is the state in which matter maintains a fixed volume and shape; liquid is the state in which matter adjusts to the shape of its container but tends to vary only mildly in volume; and gas is the state in which matter expands to occupy the volume and shape of its container.

What is matter?

Matter would be any substance with mass and volume that occupies space.

Matter exists in three states: solid, liquid, and gas. The states of matter are solid, liquid, and gas.

Solid is the phase in which matter retains a fixed volume and shape.Liquid is the entity in which matter adjusts to the shape of its container but tends to vary only slightly in volume.Gas is the phase in which matter expands to occupy the volume and shape of its container.

Thus, above-mentioned are the three states of matter.

For more details regarding states of matter, visit:

https://brainly.com/question/9402776

#SPJ2

es with hydrogen
atoms
Fill the valencies with
C
+
() C c-c=c
(ii)
(
c
C - C = C
/
c
(ii)
c
- C
با
-
1
c - c
С — С
co

Answers

Answer:

all u have to do is inserting hydrogen atoms where it's possible, if carbon is not bonded to any element, then it can have 4 hydrogens. for the first chain, the first carbon can have 3 hydrogen atoms, the second carbon 1 hydrogen atom only the third also 1 hydrogen since there is double bond and the 4th 2 hydrogen atoms

Answer:

a rat and a cat can have sex

xD

Explanation:

.hlp me to solve mcq​

Answers

Answer:

i) b

ii) c

Explanation:

Please see attached picture for full solution.

Please help me...

Atoms of elements X, Y and Z have 16, 17 and 19 electrons, respectively. Atoms of argon have 18 electrons.

a Determine the formulae of the compounds formed by the combination of the atoms of the elements:
(i) X and Z
(ii) Y and Z
(iii) X with itself.

b In each of the cases shown in
A (i)–(iii) above, name the type of chemical bond formed.

c Give two properties you would expect to be shown by the compounds formed in an (ii) and an (iii).

Answers

Answer:

a 1) XZ2

2) YZ

3) X2

b 1) Ionic bond

2) Ionic bond

3) covalent bond

c) ionic compounds has high melting and boiling point

ionic compounds can conduct electicity in aqueous form

covalent compounds have electrons shared between the atoms

covalent compounds have lower melting point compared to ionic compound

Answer:

(i) XZ = Potassium Sulfide [K2SO4]

(ii) YZ = Potassium Chloride [KCI]

(iii) X = Sulfur [S]

b) (i) Ionic Bond. (ii) Ionic Bond. (iii) Covalent Bond.

c) (i) Ionic compounds have high melting and boiling points.

(ii) Ionic compounds can conduct electricity in a molten state or a solution as they have ions that can move and carry charge.

(iii) Covalent compounds have low melting and boiling points.

(iv) Covalent compounds can not conduct electricity as all electrons are involved in bonding so there are no free electrons or ions to carry the charge.

Hope this is OK :))

Please mark me as Brainliest:))

A balloon is floating around outside your window. The temperature outside is 31 ∘C , and the air pressure is 0.700 atm . Your neighbor, who released the balloon, tells you that he filled it with 4.10 moles of gas. What is the volume of gas inside this balloon? Express to THREE signficant figures.

Answers

Answer:

the volume of gas inside this balloon = 146.3 L

Explanation:

Given that:

The temperature T = 31 °C = ( 31 + 273.15 )K = 304.15 K

The air pressure P = 0.700 atm

number of moles of gas n = 4.10 moles

Gas constant = 0.0821 L atm/K/mol

The objective is to calculate the volume of the gas inside the ballon.

Using the Ideal gas equation

PV = nRT

V = nRT/P

V = (4.10×0.0821×304.15)/0.700

V = 102.3799/0.700

V = 146.257 L

V = 146.3 L

Thus, the volume of gas inside this balloon = 146.3 L

If a gas displays a solubility of 0.00290M at a partial pressure of 125 kPa, what is the proportionality constant for this gas in this solvent and at this temperature?

Answers

Answer:

The proportionality constant ( Henry’s constant) = 2.32 * 10^-5 M/kPa

Explanation:

Here in this question, we are concerned with calculating the proportionality constant for this gas.

Mathematically, we can get this from Henry law

From Henry law;

Concentration = Henry constant * partial pressure

Thus Henry constant = concentration/partial pressure

Henry constant = 0.00290 M/125 kPa = 2.32 * 10^-5 M/kPa

Other Questions
PLEASE HELP!!! 10. Write the formula of the function f(x) whose graph is shown.Af(x) = 4 - 4Bf(x)=1= - +4Xf(x) = 24D1f(x) =X +4 Please help with this The graphs below have the same shape. What is the equation of the bluegraph? I suck at math, online school is really hard I need to find a tutor, can this be explained? how to solve this equation x2-5x=0 0.10 moles of sodium sulfate is dissolved into 12 mL of solution. What is the molar concentration of the solution?Your answer should have two significant figures (round your answer to one decimal place). A student mixed 50 ml of 1.0 M HCl and 50 ml of 1.0 M NaOH in a coffee cup calorimeter and calculate the molar enthalpy change of the acid-base neutralization reaction to be 54 kJ/mol. He next tried the same experiment with 100 ml of 1.0 M HCl and 100 ml of 1.0 M NaOH. The calculated molar enthalpy change of reaction for his second trial was: Can someone pls help me &THANK YOU SLATTTT!!! Let f(x) = 7x 13. Find f1(x) Type the expression that results from the following series of steps: Start with y, times by 4, then subtract 9. Expensive department stores market service and atmosphere while less expensive stores market location and perceived lower prices or credit (check cashing services). This is characteristic of _______________________ . Explain the difficulties in finding and reaching markets for almonds, dates and other fruit grown in Pakistan. The graph below represents the function f.f(x)if g is a quadratic function with a positive leading coefficient and a vertex at (0,3), which statement is true?.The function fintersects the x-axis at two points, and the function g never intersects the x-axis.BThe function fintersects the x-axis at two points, and the function g intersects the x-axis at only one point.c.Both of the functions fand g intersect the x-axis at only one point.DBoth of the functions fand g intersect the x-axis at exactly two points. In a stable matching problem, if every man has a different highest-ranking woman on his preference list, and given that women propose, then it is possible that, for some set of women's preference lists, all men end up with their respective highest-ranking woman.a. Trueb. False Koch makes seven points to support his claim that "life is precious and the death penalty helps to affirm that fact"; some are good, and some are not. Which one of his seven points is the weakest? Please explain the reasoning behind your response. You are performing an experiment that requires the highest-possible magnetic energy density in the interior of a very long current-carrying solenoid. Which of the following adjustments increases the energy density?a. Increasing only the length of the solenold while keeping the turns per unit lengh flxed. b. Increasing the number of turns per unit length on the solenold. c. Increasing the cross-sectional area of the solenoid. d. None of these. e. Increasing the current in the solenoid. The Rhaegel Corporations common stock has a beta of 1.2. If the risk-free rate is 4.3 percent and the expected return on the market is 13 percent, what is the companys cost of equity capital? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) 13.Compared to other types of bonds, what are the minimum denominations of savings bonds?relatively highrelatively moderatevariablerelatively low 1) What is India size and location ? Chylomicrons A. are synthesized in intestinal epithelial cells. B. enter capillaries in the small intestine. C. help emulsify fats. D. are a rich source of carbohydrate. E. are synthesized in the lumen of the small intestines.