Which statement or question is a good hypothesis

Answer:

r = 41.1 10⁹ m

Explanation:

For this exercise we use the equilibrium condition, that is, we look for the point where the forces are equal  

                  ∑ F = 0

                  F (Earth- probe) - F (Mars- probe) = 0

                  F (Earth- probe) = F (Mars- probe)

Let's use the equation of universal grace, let's measure the distance from the earth, to have a reference system

the distance from Earth to the probe is        R (Earth-probe) = r

the distance from Mars to the probe is        R (Mars -probe) = D - r

where D is the distance between Earth and Mars

                 [tex]G \ \frac{m \ M_{Earth}}{r^2} = G \ \frac{m \ M_{Mars}}{(D-r)^2}[/tex]

                 M_earth (D-r)² = M_Mars r²

                 (D-r) = [tex]\sqrt{ \frac{M_{Mars}}{ M_{Earth}} }[/tex]    r

                  r ( [tex]1 + \sqrt{ \frac{M_{Mars}}{M_{Earth}} }[/tex]) = D

                  r = [tex]\frac{D}{ 1+ \sqrt{\frac{M_{Mars}}{ M_{Earth}} } }[/tex]

We look for the values ​​in tables

                  D = 54.6 10⁹ m (minimum)

                  M_earth = 5.98 10²⁴ kg

                  M_Marte = 6.42 10²³ kg = 0.642 10²⁴ kg

let's calculate

                  r = 54.6 10⁹ / (1 + √(0.642/5.98)  )

                  r = 41.1 10⁹ m

Answer:

d= 637323 meters

t= 360.5 seconds

Answer:

Explanation:

Since the height from which the shell was fired is the same as the height at which it lands (on the ground, to be specific), we will use the range equation. That is the only time you CAN use the range equation (when the initial height and the final height are exactly the same). The range equation is:

[tex]r=\frac{v_0^2sin(2\theta)}{g}[/tex] where v0 is the initial velocity, theta is the angle, and g is the pull of gravity (NOT negative). Filling in:

[tex]r=\frac{(1500)^2sin(9.0*10^1)}{9.8}[/tex] so, doing all that math gives us:

r = 6.4 × 10⁵ meters

Answer:

2 more neutrons

Explanation:

To obtain the answer to the question, let us calculate the number of neutrons in carbon–14 and standard carbon (i.e carbon–12). This can be obtained as follow:

For carbon–14:

Mass number = 14

Proton number = 6

Neutron number =?

Mass number = Proton + Neutron

14 = 6 + Neutron

Collect like terms

14 – 6 = Neutron

8 = Neutron

Neutron number = 8

For carbon–12:

Mass number = 12

Proton number = 6

Neutron number =?

Mass number = Proton + Neutron

12 = 6 + Neutron

Collect like terms

12 – 6 = Neutron

6 = Neutron

Neutron number = 6

SUMMARY:

Neutron number of carbon–14 = 8

Neutron number of carbon–12 = 6

Finally, we shall determine the difference in the neutron number. This can be obtained as follow:

Neutron number of carbon–14 = 8

Neutron number of carbon–12 = 6

Difference =?

Difference = (Neutron number of carbon–14) – (Neutron number of carbon–12)

Difference = 8 – 6

Difference = 2

Therefore, carbon–14 has 2 more neutrons than standard carbon (i.e carbon–12)

Explanation:

A diode is an electrical element which offers the flow of current freely in one direction with very less resistance.

The given figure depicts a diode in forward bias, where the p-side and the n-side of the diode are connected to positive and negative terminals respectively. In such a case the current flows from the p-side to n-side of the p-n junction very easily and the value of the current increases rapidly after a certain voltage, this voltage is called threshold voltage.

We can deduce from the graph that the resistance of the diode reduces with increase in voltage. As resistance is given by the formula:

[tex]R=\frac{V}{i}[/tex]

Answer:

it takes 365 days to revolve around the star(sun)

Answer:

C. Increase in back emf

Explanation:

As the current through the field winding decreases the field strength also decreases and the back-emf is reduced, as a result the motor speeds up.

When the motor begins to speed-up, an additional back EMF is generated due to induction which reduces armature current. This also results in reduced strength of the field flux. The back emf generated is not enough to reduce the armature current which could stop the acceleration of the motor and the motor further accelerates.

hope it is helpful to you

Answer:

C. More of the heat is transferred to the kinetic energy of the copper atoms than to the kinetic energy of the water molecules.

Explanation:

Both equal masses of water and copper were heated at the same temperature. Since copper is a good conductor of heat compared to water, its  absorbs more heat. Which in-turn increases the rate of vibrations of the atoms in the copper mass, thus increasing their kinetic energy.

In the case of water, its molecules displaces one another after being heated to a higher temperature compared to neighboring molecules. So that the heated molecule becomes less dense and floats to the surface of water.

This property of copper makes it to be heated to a higher final temperature than the water.

Answer:

there is no context??????

Answer: Oblique impact

Explanation:

When the motion of one or both of the particles is at an angle to the line of impact, the impact is said to be oblique impact.

On the other hand, when the directions of motion of the two colliding particles are moving along a line of impact, then it's refered to as central impact.

Kettles heated on stoves are used to be made up of copper. This is because copper is a good conductor of heat and electricity.

Copper is used in making kettles. This is because copper is an excellent choice for a tea kettle as it is an excellent conductor of heat and electricity. This means that copper heats up quickly and evenly, making it ideal for the purpose of boiling water and preparing tea. Copper is also a durable material which can last for many years with proper care.

Copper kettles are polished from the outer surface as it is subject to corrosion that is caused by salts and sulfates. If the kettles are not cleaned completely, this corrosion, even as a slight film, will affect the taste of what is prepared in that copper kettle, giving a metallic sensation to taste.

Learn more about Copper here:

https://brainly.com/question/13677872

#SPJ2

Answer: See explanation

Explanation:

From the information given, we are informed that an instrument rated pilot is planning a flight under IFR on July 10, this year.

It should be noted that before conducting the flight, the pilot must have performed and logged the prescribed tasks and repetitions that are required for instrument currency no earlier than January, 10 for the year.

Answer:

Only (I) is true

i) Mass is conserved during a chemical reaction.

Answer:

Time, t = 4.165 seconds.

Explanation:

Given the following data;

Initial velocity = 60 km/h

Final velocity = 90 km/h

Acceleration = 2 m/s²

Conversion:

60 km/hr to meters per seconds = 60*1000/3600 = 60000/3600 = 16.67 m/s

90 km/hr to meters per seconds = 90*1000/3600 = 90000/3600 = 25 m/s

To find the time, we would use the first equation of motion;

[tex] V = U + at[/tex]

Where;

V is the final velocity.

U is the initial velocity.

a is the acceleration.

t is the time measured in seconds.

Making time, t the subject of formula, we have;

[tex] t = \frac{V - U}{a}[/tex]

Substituting into the equation, we have;

[tex] t = \frac{25 - 16.67}{2}[/tex]

[tex] t = \frac{8.33}{2}[/tex]

Time, t = 4.165 seconds.

Answer:

Explanation:

the high heels has a more pressure than flat soles bcoz small area has more pressure than large area.

Answer:

1 km

Explanation:

Bob travels at one km/h and it takes him one hour to get there.

Answer:

11.86°

Explanation:

Projectile motion is a form of motion where an object moves in parabolic path (trajectory). Projectile motion only occurs when there is one force applied at the beginning on the trajectory, after which the only interference is from gravity.

The range of an object experiencing projectile motion is given by:

R = u²sin(2θ) / g

where u is the initial velocity, θ is the angle with horizontal and g is the acceleration due to gravity

Given that R = 6.8 m, g = 10 m/s², u = 12 m/s.  

R = u²sin(2θ) / g

substituting:

6.8 = 13²sin(2θ) / 10

13²sin(2θ) = 68

sin(2θ) = 0.4024

2θ = sin⁻¹(0.4024)

2θ = 23.73

θ = 11.86°

Answer:

Explanation:

You need something that relates distance to what the gravitational pull is. You can set up a complex sort of proportion. What you need is a number that is comparable to 9.81 or you can just use the Gravitational Force formula with a 4 tier fraction.

Givens

x = the additional distance toward outer space above the radius of the earth.

G is the gravitational constant.

m1 = the person's mass (which does not change no matter where you are).

m2 = the earth's mass

F1 = 588 N

F2 = 300 N

Formula

[tex]\frac{F1}{F2} = \frac{588 N}{300N}=\frac{\frac{Gm1*m2/}{6400^2} }{\frac{G*m1*m2}{(6400 + x)^2} }[/tex]

Solution

G*m1*m2 all cancel. So what you get looks like this.

[tex]\frac{588}{300} = \frac{(6400 + x)^2}{6400^2}[/tex]

Cross Multiply

588 * 6400^2 = 300*(6400+x)^2  Now all you need do is solve for x.

x will be in km.

588*40960000 = 300 * (40960000 + 12800x + x^2)

1.2288*10^10 + 3840000x + 300x^2  = 2.408448*10^10

300x^2 + 3840000x + 1.2288*10^10 = 2.408448 * 10^10  

Subtract 2.409448 * 10^10 from both sides.

300x^2 + 3840000x - 1,179648 * 10^10

Now use the quadratic formula

I'm guessing I should have converted this to meters because I'm getting ridiculous numbers. They are already large enough as you can see. The method is correct, even if the numbers are not.  

Answer:

30m/ s

Explanation:

this is an example of a projectile, where the path traced by the ball will be a downward parabola.

one must know that the vertical velocity of an object having projectile motion is zero at the top of its trajectory and that the horizontal velocity remains constant throughout.

this means, at the top of the trajectory the ball's overall speed will be equal to its horizontal velocity.

and horizontal velocity is given 30 m/s

hence, overall speed of the ball = 30m/ s

The amount of energy required for a unit mass of a substance to undergo a phase change from liquid to gas.

R= 40cm —> R= 0.4 m

P= 2mm —> P= 0.002 m

[tex]V.R = \frac{2πR}{p} = \frac{2 \times 3.14 \times 0.4}{0.002} = 1256[/tex]

I think this is the answer

I hope I helped you

Good luck ^_^

Answer:

I would not feel fear because I haven't had the physiological arousal necessary to induce that emotional state.

Explanation:

The James-Lange theory is a theory of emotions. According to the James-Lange theory, the emotions of a human occur as a result of the physiological reactions to the surrounding events. His theory is one of the well known psychological theories of emotions.

In the context, I took a medicine that prevented the activation of my sympathetic nervous system and imagined a venomous snake that crawls up my leg, I did not feel any fear as I have not had the emotion or the phycological arousal that is necessary to induce the emotional state. It is according the theory of James-Lange.

Answer:

 u = - 40 ft / s

Explanation:

The Galilean relation for the relative velocity is

         v ’= v + u

where u is the speed between the two reference frames, v is the speed of the fixed system and v 'the speed of the mobile system.

In this case the truck has a speed with respect to the ground (fixed system) 0 m / s (it is stopped), the car has a speed with respect to the ground of v = 40 ft / s,

        u = v'- v

        u = 0 - 40

        u = - 40 ft / s

the speed perceived by the car if the system is fixed on it is -40 ft / s

Coulomb, unit of electric charge in the metre-kilogram-second-ampere system, the basis of the SI system of physical units. ... The coulomb is defined as the quantity of electricity transported in one second by a current of one ampere.

Mark me as brainliest....

Answer:

MA = 1.66, VR = 2,  Efficiency = 83.33%

Explanation:

Given the following

Load = 500N

Effort = 300N

Mechanical Advantage = Load/Effort

MA = 500/300

MA = 5/3 = 1.66

Velocity ratio is the number of pulleyc present in the block and tackle system. Since the pulley is a single movable pulley, then VR = 2

Efficiecncy n = MA/VR * 100%

n = 1.66/2 * 100

n = 166/2

n = 83.33%