Answer:
K^+ and NO3^-
Explanation:
In a balanced ionic equation, we usually see the species that react to yield the main product in the reaction.
Consider the reaction;
Pb(NO3)2(aq) +2 KI(aq) -------> PbI2(s) + 2KNO3(aq)
The main product in this reaction is PbI2. Hence the balanced ionic equation is;
Pb^2+(aq) + 2I^-(aq) ------> PbI2(s)
Notice that K^+ and NO3^- did not participate in this reaction. All ions that are part of the molecular equation but do not participate in the ionic reaction equation are called spectator ions. Hence K^+ and NO3^- are spectator ions in this reaction as can be seen clearly above.
Question 13: Consider the strength of the Hβ absorption line in the spectra of stars of various surface temperatures. This is the amount of light that is missing from the spectra because Hydrogen electrons have absorbed the photons and jumped from level 2 to level 4. How do you think the strength of Hβ absorption varies with stellar surface temperature?
Answer:
The absorption and strength of the H-beta lines change with the temperature of the stellar surface, and because of this, one can find the temperature of the star from their absorption lines and strength. To better comprehend, let us look into the concept of the atom's atomic structure.
Atoms possess distinct energy levels and these levels of energy are constant, that is, the temperature has no influence on it. However, temperature possesses an influence on the electron numbers found within these levels of energy. Therefore, to generate an absorption line of hydrogen in the electromagnetic spectrum's visible band, the electrons are required to be present in the second energy level, that is when it captivates a photon.
Therefore, after captivating the photons the electrons jump from level 2 to level 4, which shows that there is an increase in the stellar surface temperature and at the same time one can witness a decline in the strength of the H-beta lines. In case, if the temperature of the surface increases too much, then one will witness no attachment of electron with the hydrogen atom and thus no H lines, and if the temperature of the surface becomes too low, then the electrons will stay in the ground state and no formation of H lines will take place in that condition too.
Hence, to generate a very robust H line, after captivating photons the majority of the electrons are required to stay in the second energy level.
Please answers only , 100 pts and brainliest, wrong answers will be reported.
What is the molarity of 9.8 gram Sulfuric Acid in 500 mL of water?
Answer:
.2mol/L
Explanation:
Answer:
2mol/l
Explanation:
What is science? Answer for brainilest
Answer:
The importance of learning is that it helps the individual to acquire the necessary skills through learning and knowledge so that he can achieve his set goals. An important fact about learning is that it is a means to improve knowledge and gain skills that will help in reaching specific goals
Explanation:
The importance of learning is that it helps the individual to acquire the necessary skills through learning and knowledge so that he can achieve his set goals. An important fact about learning is that it is a means to improve knowledge and gain skills that will help in reaching specific goals
PbCl2+ AgNO3------>Pb(NO3)2+ AgCl
Decomposition
Synthesis
Double displacement
Exothermic
Answer:
Option C
Explanation:
A double displacement reaction is the one in which two chemical compounds having a cation and anion in each exchange their positive and negative ions thereby forming new compounds or products.
Here,
The first compound [tex]PbCl_2[/tex] has a positive ion [tex]Pb[/tex] and negative ion [tex]Cl^-[/tex]
Like wise the second compound [tex]Ag(NO_3)[/tex] has a positive ion [tex]Ag[/tex] and negative ion [tex]NO_3[/tex]
The new compounds will be formed when cation of one compound attaches with the anion of other compound. Hence the new compounds are
[tex]Pb(NO_3)_2[/tex]
[tex]AgCl[/tex]
This is example of double displacement reaction.
Option C is correct
A solution is prepared by mixing 525 mL of ethanol with 597 mL of water. The molarity of ethanol in the resulting solution is 8.35 M. The density of ethanol at this temperature is 0.7893 g/mL. Calculate the difference in volume between the total volume of water and ethanol that were mixed to prepare the solution and the actual volume of the solution. g
Answer:
[tex]\Delta V = 234.736\,mL[/tex]
Explanation:
The quantity of moles of ethanol in the solution is:
[tex]n_{C_{2}H_{5}OH} = \left(\frac{597\,mL}{1000\,mL} \right)\cdot \left(8.35\,\frac{mol}{L} \right)[/tex]
[tex]n_{C_{2}H_{5}OH} = 4.985\,mol[/tex]
The mass and volume of ethanol in the solution are, respectively:
[tex]m_{C_{2}H_{5}OH} = (4.985\,mol)\cdot \left(46.07\,\frac{g}{mol} \right)[/tex]
[tex]m_{C_{2}H_{5}OH} = 229.658\,g[/tex]
[tex]V_{C_{2}H_{5}OH} = \frac{229.658\,g}{0.7893\,\frac{g}{mL} }[/tex]
[tex]V_{C_{2}H_{5}OH} = 290.964\,mL[/tex]
The difference between the total volume of water and ethanol mixed to prepare the solution and the actual volume of solution is:
[tex]\Delta V = (525\,mL+597\,mL) - (597\,mL + 290.964\,mL)[/tex]
[tex]\Delta V = 234.736\,mL[/tex]
The difference in volume between the total volume of water and ethanol is ΔV =234.736 mL.
Calculation for moles of ethanol:The quantity of moles of ethanol in the solution is:
[tex]nC_2H_5OH=\frac{597mL}{1000mL} *8.35mol/L\\\\nC_2H_5OH=4.985 moles[/tex]
The mass and volume of ethanol in the solution are, respectively:
[tex]mC_2H_5OH=4.985moles*46.07g/mol\\\\mC_2H_5OH=229.685g[/tex]
[tex]VC_2H_5OH=\frac{229.685g}{0.7893g/mL} \\\\VC_2H_5OH=290.964mL[/tex]
The difference between the total volume of water and ethanol mixed to prepare the solution and the actual volume of solution is:
ΔV= (525mL+597mL)- (597mL + 290.964 mL)
ΔV= 234.736mL
Find more information about Moles here:
brainly.com/question/13314627
please do this guys i need a lot of help please!
Answer:
the European countries grew together.
Explanation:
Europe saw human inflows from east and southeast.
the Roman Empire came to dominate the entire Mediterranean basin.
European politics from 1947 to 1989 made the European countries grew together.
When you add a controlled amount of substance known as an impurity to a pure semiconductor, its conductivity increases. This process is known as doping. The addition of an impurity can increase or decrease the number of available electrons. If the number of electrons is increased, the extra electrons conduct electricity. If the number of electrons is decreased, a vacant hole is created. The adjacent electron enters the vacant hole and conducts electricity. Thus, it seems like the holes act as charge carriers. They are considered to be positive charge carriers. Depending upon the charge carriers that conduct electricity, there are two types of semiconductors: p-type semiconductors and n-type semiconductors.Which of the following statements are correct with respect to semiconductors?
a) The addition of group 3A elements to group 4A semiconductors decreases the conductivity of the group 4A semiconductors.
b) The conductivity of semiconductors can be increased by the doping process.
c) As the temperature increases, the conductivity of semiconductors decreases.
d) The addition of group 5A elements to group 4A semiconductors increases the conductivity of the group 4A semiconductors.
e) Holes are charge carriers in p-type semiconductors.
f) Electrons are charge carriers in n-type semiconductors.
Answer:
See explaination
Explanation:
1. The addition of group 3A elements to group 4A semiconductors decreases the conductivity of the group 4A semiconductors: Wrong
The addition of 3A group elements inreases the conductivity and make them extrinsic semiconductors( p-type)
2. The conductivity of semiconductors can be increased by the doping process.: Correct
3.As the temperature increases, the conductivity of semiconductors decreases.. wrong
As the temperature increases, the conductivity of semiconductors increases.
4. The addition of group 5A elements to group 4A semiconductors increases the conductivity of the group 4A semiconductors: Correct : They will create n-type semicoductor.
5.Holes are charge carriers in p-type semiconductors: Correct
6. Electrons are charge carriers in n-type semiconductors: Correct
6.) (5 points) Assume you have a system with a fixed pH of 4.0. It is well buffered and therefore the pH will not change. What is the predominant state of a molecule with a dissociable proton with a pKa of 5.2 if it is introduced to that system (protonated or deprotonated)
Answer:
Dissociated state is the predominant one
Explanation:
When a molecule with pKa of 4.52 is in an aqueous solution at pH = 4.0, follows the H-H equation, thus:
pH = pKa + log₁₀ [A⁻] / [HA]
Where [A⁻] is the dissociated state and [HA] represents the protonated state
Replacing:
4.0 = 5.2 + log₁₀ [A⁻] / [HA]
-1.2 = log₁₀ [A⁻] / [HA]
0.063 = [A⁻] / [HA]
[HA] = 16 [A⁻]
That means you have 16 times more [HA] than [A⁻] and the dissociated state is the predominant one
A gas in a piston–cylinder assembly undergoes a compression process for which the relation between pressure and volume is given by p = AV2 + BV-2 (p is in bar and V is in m3). The initial volume is 0.1 m3, and the initial pressure is 1 bar. The final volume is 0.04 m3, and the final pressure is 2 bar. Determine:
Answer:
1.
[tex]A=69.8\frac{bar}{m^6}\\\\ B=0.00302bar*m^6[/tex]
2. [tex]W=-8.2kPa[/tex]
Explanation:
Hello,
1. In this case, for the given p-V equation, one could use the two states to form a 2x2 linear system of equations in terms of A and B:
[tex]\left \{ {{0.1^2A+0.1^{-2}B=1} \atop {0.04^2A+0.04^{-2}B=2}} \right.[/tex]
[tex]\left \{ {{0.01A+100B=1} \atop {0.0016A+625B=2}} \right[/tex]
Whose solution by any method for solving 2x2 linear system of equations (elimination, reduction or substitution) is:
[tex]A=69.8\frac{bar}{m^6}\\\\ B=0.00302bar*m^6[/tex]
2. Now, for us to compute the work, we must first compute n, as the power relating the pressure and volume for this process:
[tex]P_1V_1^n=P_2V_2^n\\\\\frac{P_1}{P_2}=(\frac{V_2}{V_1} )^n\\\\\frac{1bar}{2bar}= (\frac{0.04m^3}{0.1m^3} )^n\\\\0.5=0.4^n\\\\n=\frac{ln(0.5)}{ln(0.4)} =0.7565[/tex]
Now, we compute the work:
[tex]W=\frac{P_2V_2-P_1V_1}{1-n} =\frac{2bar*0.04m^3-1bar*0.1m^3}{1-0.7565} \\\\W=-0.082bar*m^3*\frac{1x10^2kPa}{1bar}\\ \\W=-8.2kPa[/tex]
Regards.
I'll give you 100 points
Which are evidence of seafloor spreading? Select three options. A.molten material B.magnetic stripes C.continent material D.drilled core samples E.ocean water samples
Helium occupies a volume of 3.8 L at –45°C. What was its initial temperature when it occupied 8.3 L?
Answer:
98.3 gradius Celsius
Explanation:
This problem is solved using the Ideal Gas Equation
pV = nRT
...
Please see the step-by-step solution in the picture attached below.
Hope this answer can help you. Have a nice day!
is the normal resting position of an object.
Answer:
being stationary relative to a particular frame of reference or another object; when the position of a body with respect to its surroundings does not change with time it is said to be at rest
Explanation:
Been stationary is the normal resting position of an object
When an object is at rest ( normal resting position ) it is stationary ( i.e. the position of the object does not change with time in relation to its environment or another object/reference )
When an object is at rest it posses its' highest potential energy and its least kinetic energy. therefore been stationary is the normal resting position of an object.
Hence we can conclude that Been stationary is the normal resting position of an object.
Learn more : https://brainly.com/question/22533065
if a sample of gas at 25.2 c has a volume of 536mL at 637 torr, what will its volume be if the pressure is increased to 712 torr?
How do you calculate the number of protons, neutrons, and electrons in an element?
Answer:
The first thing you will need to do is find some information about your element. Go to the Periodic Table of Elements and click on your element. If it makes things easier, you can select your element from an alphabetical listing.
Number of Protons = Atomic Number
Number of Electrons = Number of Protons = Atomic Number
Number of Neutrons = Mass Number - Atomic Number
For krypton:
Number of Protons = Atomic Number = 36
Number of Electrons = Number of Protons = Atomic Number = 36
Number of Neutrons = Mass Number - Atomic Number = 84 - 36 = 48
Explanation:
hope this helps, have a good day :-)
If I add 50 mls of water to 300 mls of 0.6M KNO3 solution, what will be the molarity of the diluted solution?
Answer:
[tex]M_2=0.51M[/tex]
Explanation:
Hello,
In this case, for this dilution process, we understand that the moles of the solute (potassium nitrate) remain unchanged upon the addition of diluting water. However, the resulting or final volume includes the added water as shown below:
[tex]V_2=300mL+50mL=350mL[/tex]
In such a way, we are able to relate the solution before and after the dilution by:
[tex]V_1M_1=V_2M_2[/tex]
Hence, we solve for the final molarity as:
[tex]M_2=\frac{M_1V_1}{V_2}=\frac{0.6M*300mL}{350mL}[/tex]
Best regards.
[tex]M_2=0.51M[/tex]
Which diagram correctly describes the changes that occur as a small piece of rock falls from space and hits the earth
Answer:
the motion of gravity
Explanation:
Answer:
its c
Explanation
advhuosijoklxcmnjdabsuhggggabciaciudeifweingivg eygerigsygfe97rsghisdcvhbsduigwiugfu9uigdgiurfgyisdgfsdgfegiygewifgsdygfewusgfuyesigf7wgfiesgfiusgdfies
.The pH is 3. What is [H+]? *
1 point
0.001
0.01
100
1000
Answer:
0.001 M
Explanation:
The pH scale is used to determine the acidity or basicity of a solution.
If pH < 7, the solution is acid.If pH = 7, the solution is neutral.If pH > 7, the solution is basic.The pH is related to the concentration of hydrogen ions through the following expression.
pH = -log [H⁺]
[H⁺] = antilog -pH = antilog - 3 = 0.001 M
If you start with 64g of a radioactive element how many half-lives would occur before 8g remain?
Answer:
3 half-lives
Explanation:
The half-life is the time that it takes to a radioactive element to decay to half of its initial amount.
Let's suppose we start with 64 g of the radioactive element.
After 1 half-life, the mass of the element will be 32 g.After 2 half-lives, the mass of the element will be 16 g.After 3 half-lives, the mass of the element will be 8 g.Based on the diagram below, how much of the excess reactant is left over? *
2 slices of bread and 3 pieces of lunchmeat
2 slices of bread and 2 slices of cheese
2 of lunchmeat and 3 slices of cheese
3 of lunchmeat and 2 slices of cheese
Answer:
3 pieces of lunch-meat and 2 slices of cheese
Explanation:
You have enough bread to make 3 sandwiches
You have enough lunch-meat to make 4 sandwiches
You have enough cheese to make 5 sandwiches
In all you have enough material to make 3 sandwiches
so if you subtract three from each number above you will have no bread, enough lunch-meat to make one sandwich and enough cheese to make two sandwiches
luch-meat for one sandwich is: 3 pieces
Cheese for two sandwiches is: 2 pieces
Nikolas, the fire extinguisher, and the skateboard have a combined mass of 50 kg. What force would the fire extinguisher have to produce to propel nikolas if he wanted to accelerate at a rate of 1.2 m/s squared
Answer:
Force used by fire extinguisher = 60 N
Explanation:
Given:
Mass of skateboard with fire extinguisher = 50 kg
Acceleration of fire extinguisher = 1.2 m/s²
Find:
Force used by fire extinguisher = ?
Computation:
⇒ Force = Mass × Acceleration
⇒ Force used by fire extinguisher = Mass of skateboard with fire extinguisher × Acceleration of fire extinguisher
⇒ Force used by fire extinguisher = 50 kg × 1.2 m/s²
⇒ Force used by fire extinguisher = 60 N
Answer:
Force=60 N
Hope this helps ya'll!
How to make isopropyl alcohol
Answer:
.It is easily synthesized from the reaction of propylene with sulfuric acid, followed by hydrolysis. Isopropyl alcohol (2-propanol) is made by indirect hydration of propylene (CH2CHCH3).… In some cases the hydration of propylene is carried out in one step, using water and a catalyst at high pressure.
Hope it'll help!
stay safe:)
3. Infer A forgotten ice pop lies melting on a deck on a hot summer day. What is the direction of heat flow as the ice pop melts?
Is the process endothermic or exothermic? Explain.
Answer:
Endothermic. The energy is flowing into the molecules causing them to break apart and the ice pop change state.
Answer:
Yes, an autumn day isn’t cold enough to keep an ice pop at freezing temperatures.
PLEASE HELP!!!! How many moles of helium are needed to fill a balloon to a volume of 4.9 at 296°K and 0.78 atm?
Answer:
THE NUMBER OF MOLES OF HELIUM NEEDED TO FILL A BALLOON AT A VOLUME OF 4.9 L AT 296 K AND 0.78 atm IS 0.00338 moles.
Explanation:
The number of moles is calculated using
PV = nRT
P = Pressure = 0.78 atm
V = volume = 4.9 L
R = gas constant = 0.082 Latm/molK
T = temperature = 296 K
n= number of moles
Substituting theses values and sloving for n, we obtain;
n = PV / RT
n = 0.78 * 4.9 / 0.082 * 296
n = 3.822 / 24.272
n = 0.00338 moles.
So therefore, the number of moles is 0.00338 moles.
Answer:
The number of moles of helium needed is 0.157 moles helium
Explanation:
Step 1: Data given
Volume of the balloon = 4.9 L
Temperature= 296 K
Pressure = 0.78 atm
Step 2: Calculate moles of helium gas
p*V = n*R*T
⇒with p = the pressure = 0.78 atm
⇒with V = the volume = 4.9 L
⇒with n = the number of moles of the helium gas = TO BE DETERMINED
⇒with R = the gas constant = 0.08206 L*atm/mol* K
with T = the temperature = 296 K
n = (p*V) / (R*T)
n = (0.78 atm* 4.9 L) / (0.08206 L*atm/mol*K * 296 K)
n = 0.157 moles of helium
The number of moles of helium needed is 0.157 moles helium
Write and balance the double replacement reaction between barium sulfate and titanium (II) oxide.
Answer:
BaSO4(aq) + TiO(aq) —> BaO(aq) + TiSO4(aq)
Explanation
The equation for the reaction between barium sulfate and titanium (II) oxide is given below:
BaSO4 + TiO —>
In solution, the reactants will dissociates as follow:
BaSO4(aq) —> Ba^2+(aq) + SO4^2-(aq)
TiO(aq) —> Ti^2+(aq) + O^2-(aq)
The double displacement reaction will occur as follow:
Ba^2+(aq) + SO4^2-(aq) + Ti^2+(aq) + O^2-(aq) —> Ba^2+O^2-(aq) + Ti^2+SO4^2-(aq)
We can see that a double displacement reaction occurred as there is a double exchange of ions in the solution. The elemental equation is given below:
BaSO4(aq) + TiO(aq) —> BaO(aq) + TiSO4(aq)
What is the total oxidation state of the fluorine atoms
Answer:
-1
Explanation:
Dysphagia is the name of a disorder that disrupts
А
the swallowing reflex
B
the absorption of essential nutrients
acid levels in the stomach
C
D
the stomach lining
Answer:
A. The Swallowing reflex
Explanation:
Dysphagia Is a a condition that makes swallowing difficult.
What is the total amount of energy needed to heat 22.6 g of titanium from 1420oC to 1590oC in joules?
Answer:
[tex]Q=2091J=2.091kJ[/tex]
Explanation:
Hello,
In this case, the formula we use to compute the heat Q by increasing the temperature, in terms of the mass and the heat capacity is:
[tex]Q=mCp(T_2-T_1)[/tex]
Titanium's heat capacity is 0.544284 J/g°C, thus, the for such temperature increase, the heat results positive as shown below:
[tex]Q=22.6g*0.544284\frac{J}{g^oC}*(1590^oC-1420^oC) \\\\Q=2091J=2.091kJ[/tex]
Best regards.
6. Bacteriorhodopsin is an integral membrane protein that uses solar energy (absorbed by its retinal chromophore) to pump protons out of the cell against an electrochemical gradient. Re-entry of the protons into the cell (down the gradient through its ATPase) is then used to drive the synthesis of ATP from ADP and Pi. Consider the following conditions: intracellular pH is 9.4 and extracellular pH is 6.4, and there is a transmembrane electrical gradient of 120 mV (negative inside). The concentration of intracellular [ATP] = 1 mM, [ADP] = 50 µM, and [Pi] = 2 mM, and G° for ATP hydrolysis is -30.5 kJ/mol. Temperature is 27 °C. a. What is the energy cost of pumping one mole of H+ out of the cell? b. What is the minimal number of H+ that must re-enter the cell through the ATPase to provide sufficient energy to synthesize each ATP? Explain how you arrived at this answer quantitatively, of course.
Answer:
Explanation:
Hello!
a)
You have an integral membrane protein (Bacteriorhodopsin) that uses solar energy to pump protons out of the cell against its electrochemical gradient.
To calculate the energy needed by the protein to pump one molecule out of the cell you need to apply the free energy difference equation for a charged molecule:
ΔG= 2.303RTlog₁₀[tex](\frac{[H^+]out}{[H^+]in})[/tex]+zFΔV
Where
ΔG= free energy difference per molecule transferred from the inside to the outside
R= gas constant 8.315*10⁻³ kJ/mol
T= Temperature in Kelvin (273.15 + TºC)
z= Valency of the ion (ej Na⁺ is z= +1 and Cl⁻ is z= -1)
F= Faraday constant 96.5 kJ/V*mol
ΔV= membrane potential (Volts)
The information you have is:
Intracellular pH= 9.4
Extracellular pH= 6.4
ΔV= 120 mV
Temperature 27ºC
Using the values of pH you can calculate the intracellular and extracellular proton concentrations:
Remember the pH of a solution is calculated as pH=-log[H⁺] so if you reverse the logarithm, you'll find the concentration of protons:
b= logₐ C ⇒ C= aᵇ
[H⁺]intracelular= 10⁻⁹'⁴
[H⁺]extracelular= 10⁻⁶'⁴
Now you need to match the units of the temperature and electrical gradient to the ones in the equation:
The temperature needs to ve in Kelvin: T= 273.15 + 27ºC= 300.15K
The electrical gradients need to be in Volts: ΔV= 120 mV= 0.12V
Now you can replace the data in the formula and calculate how much energy is needed to pump one proton outside the cell:
ΔG= 2.303RTlog₁₀[tex](\frac{[H^+]out}{[H^+]in})[/tex]+zFΔV= 2.303*( 8.315*10⁻³ kJ/mol)*300.15K*log[tex](\frac{10^{-6.4}}{ 10^{-9.4}} )[/tex]+(+1)*96.5 kJ/V*mol*0.12V= 28.82 kJ/mol
It costs 28.82 kJ/mol to pump one mole of H⁺ outside the cell.
b)
To synthesize one molecule of ATP the ATP synthase uses the electrical gradient produced by the spontaneous pass of protons through the membrane. This process is called the proton-motive force.
The ATP synthase consists of two subunits F₀ and F₁ with a rotational motor mechanism that allows it to produce and release ATP.
F₁ has the subunits α, β, σ, γ, ε in charge of synthesizing ATP
F₀ is a proton pore, made of 3 subunits a, b and c. 6 subunits c make up the transmembrane ring in charge of rotation, this ring is connected to the subunits γ and ε. Each time a proton passes, it makes the ring rotate which makes the subunits γ rotate.
Each time the subunit γ rotates 360º, 3 ATP molecules are synthesized and freed. A full rotation of γ means that the c-ring also made a full rotation (for this you need one proton per subunit)
If the ring has 6 c-subunits and, then each ATP molecule needs 6/3= 2 protons to need to pass for each ATP molecule.
I hope this helps!
What are the three components of the cell theory?
Answer:
IN the description
Explanation:
The generally accepted parts of modern cell theory include:
All known living things are made up of one or more cells. All living cells arise from pre-existing cells by division. The cell is the fundamental unit of structure and function in all living organisms.
Answer:
Sample Response: The first component of the cell theory says that all living things are made of cells. The second component of the cell theory states that cells are the basic structure and function of living things. The last component of the cell theory says that cells come from other cells.
What is the hydronium ion concentration of a 0.100 M acetic acid solution with Ka = 1.8 × 10-5? The equation for the dissociation of acetic acid is: CH3CO2H(aq) + H2O(l) ⇌ H3O+(aq) + CH3CO2-(aq) What is the hydronium ion concentration of a 0.100 M acetic acid solution with Ka = 1.8 × 10-5? The equation for the dissociation of acetic acid is: CH3CO2H(aq) + H2O(l) ⇌ H3O+(aq) + CH3CO2-(aq) 1.3 × 10-2 M 4.2 × 10-2 M 1.3 × 10-3 M 4.2 × 10-3 M
Answer:
1.3×10⁻³ M
Explanation:
Hello,
In this case, given the dissociation reaction of acetic acid:
[tex]CH_3CO_2H(aq) + H_2O(l) \rightleftharpoons H_3O^+(aq) + CH_3CO_2^-(aq)[/tex]
We can write the law of mass action for it:
[tex]Ka=\frac{[H_3O^+][CH_3CO_2^-]}{[CH_3CO_2H]}[/tex]
Of course, excluding the water as heterogeneous substances are not included. Then, in terms of the change [tex]x[/tex] due to the dissociation extent, we are able to rewrite it as shown below:
[tex]1.8x10^{-5}=\frac{x*x}{0.100-x}[/tex]
Thus, via the quadratic equation or solve, we obtain the following solutions:
[tex]x_1=-0.00135M\\x_2=0.00133M[/tex]
Obviously, the solution is 0.00133M which match with the hydronium concentration, thus, answer is: 1.3×10⁻³ M in scientific notation.
Regards.
Answer:
1.3×10^-3 M
Explanation:
Step 1:
Data obtained from the question:
Equilibrium constant (Ka) = 1.8×10^-5
Concentration of acetic acid, [CH3COOH] = 0.100 M
Concentration of hydronium ion, [H3O+] =..?
Step 2:
The balanced equation for the reaction.
CH3CO2H(aq) + H2O(l) ⇌ H3O+(aq) + CH3CO2-(aq)
Step 3:
Determination of concentration of hydronium ion, [H3O+].
This can be obtained as follow:
Ka = [H3O+] [CH3CO2-] / [CH3CO2H]
Initial concentration:
[CH3COOH] = 0.100 M
[H3O+] = 0
[CH3CO2-] = 0
During reaction
[CH3COOH] = – y
[H3O+] = +y
[CH3CO2-] = +y
Equilibrium:
[CH3COOH] = 0.1 – y
[H3O+] = y
[CH3CO2-] = y
Ka = [H3O+] [CH3CO2-] / [CH3CO2H]
1.8×10^-5 = y × y / 0.1
Cross multiply
y^2 = 1.8×10^-5 x 0.1
Take the square root of both side
y = √(1.8×10^-5 x 0.1)
y = 1.3×10^-3 M
[H3O+] = y = 1.3×10^-3 M
Therefore, the concentration of the hydronium ion, [H3O+] is 1.3×10^-3 M
