Which quantities below of a solid object on this planet are NOT the same as on Earth?

Choose all
possible answers.

Weight

Mass

Volume

Density

Acceleration when it falls vertically.

Color

Answer:

0.28 J

Explanation:

Let the mass of the object is 0.5 kg

The maximum velocity of the object is 1.06 m/s.

We need to find the kinetic energy at that time. It is given by :

[tex]K=\dfrac{1}{2}mv^2\\\\=\dfrac{1}{2}\times 0.5\times (1.06)^2\\\\K=0.28\ J[/tex]

So, the required kinetic energy is equal to 0.28 J.

[tex]\implies F_1 < F_2[/tex]

[tex] \implies F_{net} = F_2 - F1[/tex]

[tex]\implies F_{net} = 42 -15[/tex]

[tex]\implies \underline{ \boxed{ F_{net} = 27 \: N}}[/tex]

The net force on the 4.0 kg box is 27 N towards EAST.

Answer:

Explanation:

From the question we are told that:

Number of turns [tex]N=10[/tex]

Area [tex]a=0.23m^2[/tex]

Magnetic field [tex]B=0.947T[/tex]

Generally the equation for maximum flux is mathematically given by

 [tex]\phi=NBa[/tex]

 [tex]\phi=10*0.047*0.23[/tex]

 [tex]\phi=0.1081wbi[/tex]

Therefore induced emf

 [tex]e= \frac{d\phi}{dt}[/tex]

Since

 [tex]t=0[/tex]

Therefore

 [tex]e=0[/tex]

Answer:

[tex]t=0.50cm[/tex]

Explanation:

From the question we are told that:

Wavelength [tex]\lamda=3c[/tex]m

Refraction Index [tex]n=1.50[/tex]

Generally the equation for Destructive interference for Normal incidence is mathematically given by

[tex]2nt=m(\frac{1}{2})\lambda[/tex]

Since  Minimum Thickness occurs at

At [tex]m=0[/tex]

Therefore

[tex]t=\frac{\lambda}{2}[/tex]

[tex]t=\frac{3}{4(1.50)}[/tex]

[tex]t=0.50cm[/tex]

Answer:

Momentum of object A = Momentum of object C < momentum of B.

Explanation:

The momentum of an object is equal to the product of mass and velocity.

Object A has a mass m and a speed v. Its momentum is :

p = mv

Object B has a mass m/2 and a speed 4v. Its momentum is :

p = (m/2)×4v = 2mv

Object C has a mass 3m and a speed v/3. Its momentum is :

p = (3m)×(v/3) = mv

So,

Momentum of object A = Momentum of object C < momentum of B.

Answer:

b

Explanation:

Answer:

In order to lift off the ground, the air in the balloon must be heated to 710.26 K

Explanation:

Given the data in the question;

P = 1.01 × 10⁵ Pa

V = 480 m³

ρ = 1.29 kg/m³

M = 381 kg

we know that; R = 8.31 J/mol.K and the molecular mass of air μ = 29 × 10⁻³ kg/mol

let F represent the force acting upward.

Now in a condition where the hot air balloon is just about to take off;

F - Mg - m[tex]_g[/tex]g = 0

where M is the mass of the balloon and its occupants, m[tex]_g[/tex] is the mass of the hot gas inside the balloon.

the force acting upward F = Vρg

so

Vρg - Mg - m[tex]_g[/tex]g = 0

solve for m[tex]_g[/tex]

m[tex]_g[/tex] = ( Vρg - Mg ) / g

m[tex]_g[/tex] =  Vρg/g - Mg/g

m[tex]_g[/tex] =  ρV - M ------- let this be equation 1

Now, from the ideal gas law, PV = nRT

we know that number of moles n = m[tex]_g[/tex] / μ

where μ is the molecular mass of air

so

PV = (m[tex]_g[/tex]/μ)RT

solve for T

μPV = m[tex]_g[/tex]RT

T = μPV / m[tex]_g[/tex]R -------- let this be equation 2

from equation 1 and 2

T = μPV / (ρV - M)R

so we substitute in our values;

P = 1.01 × 10⁵ Pa

V = 480 m³

ρ = 1.29 kg/m³

M = 381 kg

we know that; R = 8.31 J/mol.K and the molecular mass of air μ = 29 × 10⁻³ kg/mol

T = [ (29 × 10⁻³) × (1.01 × 10⁵) × 480 ] / [ (( 1.29 × 480 ) - 381)8.31 ]

T =  1405920 / 1979.442

T =  710.26 K

Therefore, In order to lift off the ground, the air in the balloon must be heated to 710.26 K

The temperature required for the air to be heated is 710.26 K.

Given data:

The mass of a hot air-balloon is, m = 381 kg.

The pressure of air outside the balloon is, [tex]P = 1.01 \times 10^{5} \;\rm Pa[/tex].

The density of air is, [tex]\rho = 1.29 \;\rm kg/m^{3}[/tex].

The volume of heated balloon is, [tex]V = 480 \;\rm m^{3}[/tex].

The condition where the hot air balloon is just about to take off is as follows:

[tex]F-mg - m'g =0[/tex]

Here,

m' is the mass of hot gas inside the balloon and g is the gravitational acceleration and F is the force acting on the balloon in upward direction. And its value is,

[tex]F = V \times \rho \times g[/tex]

Solving as,

[tex](V \times \rho \times g)-mg - m'g =0\\\\ m'=(V \rho )-m[/tex]

Now, apply the ideal gas law as,

PV = nRT

here, R is the universal gas constant and n is the number of moles and its value is,

[tex]n=\dfrac{m'}{M}[/tex]

M is the molecular mass of gas. Solving as,

[tex]PV = \dfrac{m'}{M} \times R \times T\\\\\\T=\dfrac{P \times V\times M}{m'R}\\\\\\T=\dfrac{P \times V\times M}{(V \rho - m)R}[/tex]

Since, the standard value for the molecular mass of air is, [tex]M = 29 \times 10^{-3} \;\rm kg/mol[/tex]. Then solve for the temperature as,

[tex]T=\dfrac{(1.01 \times 10^{5}) \times 480\times 381}{(480 \times (1.29) - 381)8.31}\\\\\\T = 710.26 \;\rm K[/tex]

Thus, we can conclude that the temperature required for the air to be heated is 710.26 K.

Learn more about the ideal gas equation here:

https://brainly.com/question/18518493

Answer:

Option (c).

Explanation:

Let the mass of each cart is m and the force is F.

Time for cart A is 2t and for cart B is t.

Work done is given by the

W= force x displacement

As the distance is given by

S= u t +0.5 at^2

So, when the time is doubled the distance is four times.

So, WA = F x 4 S

WB = F x S

WA= 4 WB

Answer:

Time to move out of the way = 1.74 s

Explanation:

Time to move out of the way is one fourth of period = 6.95/4 = 1.74 seconds.

Time to move out of the way = 1.74 s

Answer:

So the correct answer is letter e)

Explanation:

The electric field of an infinite yz-plane with a uniform surface charge density  (σ) is given by:

[tex]E=\frac{\sigma }{2\epsilon_{0}}[/tex]

Where ε₀ is the electric permitivity.

As we see, this electric field does not depend on distance, so the correct answer is letter e)

I hope it helps you!

Answer:

[tex]M=7.05*10^{-4}[/tex]

Explanation:

From the question we are told that:

Coil one turns N_1=1550 Turns/m

Radius [tex]r=0.0240m[/tex]

Turns 2 [tex]N_2=200N[/tex]

Generally the equation for area is mathematically given by

[tex]A=\pi*r^2[/tex]

[tex]A=\pi*0.024^2[/tex]

[tex]A=\1.81*10^{-3} m^2[/tex]

Therefore

The mutual inductance of this system is

[tex]M=\mu*N_1*N_2*A[/tex]

[tex]M=(4 \pi*10^{-7})*1550*200*1.81*10^{-3}[/tex]

[tex]M=7.05*10^{-4}[/tex]

Answer:

b. 0.20 m/s.

Explanation:

Given;

initial mass, m = 0.2 kg

maximum speed,  v = 0.3 m/s

The total energy of the spring at the given maximum speed is calculated as;

K.E = ¹/₂mv²

K.E = 0.5 x 0.2 x 0.3²

K.E = 0.009 J

If the mass is changed to 0.4 kg

¹/₂mv² = K.E

mv² = 2K.E

[tex]v = \sqrt{\frac{2K.E}{m} } \\\\v = \sqrt{\frac{2\times 0.009}{0.4} } \\\\v = 0.21 \ m/s\\\\v \approx 0.20 \ m/s[/tex]

Therefore, the maximum speed is 0.20 m/s

Answer:

(a) the velocity of the shirt is 2.14 m/s

(b) the velocity of the shirt is 5.3 m/s

Explanation:

Given;

initial velocity of the shirt, u = 5.3 m/s

height of the platform above the ground, h = 4.00 m

(a) When the shirt is caught by someone whose hand is 5.20 m from the ground level, the height traveled by the shirt = 5.2 m - 4.0 m = 1.2 m

The velocity at this position is calculated as;

[tex]v^2 = u^2 + 2(-g)h\\\\v^2 = u^2 - 2gh\\\\v^2 = 5.3^2 - (2\times 9.8 \times 1.2)\\\\v^2 = 4.57\\\\v= \sqrt{4.57} \\\\v = 2.14 \ m/s[/tex]

(b) When the shirt is caught by someone whose hand is 4.00 m from the ground level, the height traveled by the shirt = 4.00 m - 4.00 m = 0 m

The velocity at this position is calculated as;

[tex]v^2 = u^2 + 2(-g)h\\\\v^2 = u^2 - 2gh\\\\v^2 = 5.3^2 - (2\times 9.8 \times 0)\\\\v^2 = 28.09\\\\v= \sqrt{28.09} \\\\v = 5.3 \ m/s[/tex]

Answer:

4.926 L Y 7.389 L

Explanation:

first you calculate the tank volume

V = π[tex](14 cm)^{2}[/tex](10 cm = [tex]12315 cm^{3}[/tex]

then you convert to liters

[tex]12315 cm^{3}[/tex] = 12.315 l

then you calculate the liters of water

2/5(12.35 l) = 4.926 l

finally we calculate the amount without water

12.315 l - 4.926 l = 7.389 l

HERE IS MORE INFORMATION ON THE SUBJECT. THEY REMOVED THE

ENGLISH SITE BUT YOU CAN USE TRANSLATOR

LINK: https://gscourses.thinkific.com/courses/fisicai

Answer:

Move towards the wall.

Explanation:

When the balloon is kept near to the wall not touching the wall, there is a force of electrostatic attraction so that the balloon moves towards the wall and stick to it.

As there is some charge on the balloon and the wall is uncharged so the force is there due to which the balloon moves towards the wall.

Answer:

The correct answer is "[tex]21.344^{\circ}[/tex]" and "[tex]39.56^{\circ}[/tex]".

Explanation:

According to the question,

Slit width,

[tex]d=\frac{1}{910 \ lines/mm}[/tex]

  [tex]=\frac{1}{910\times 10^3}[/tex]

  [tex]=1.099\times 10^{-6} \ m[/tex]

The condition far first order maxima will be:

⇒ [tex]d Sin \theta = 1 \lambda[/tex]

Now,

⇒ [tex]\Theta_{min} = Sin^{-1} (\frac{\lambda}{d} )[/tex]

             [tex]=Sin^{-1} (\frac{400\times 10^{-9}}{1.099\times 10^{-6}} )[/tex]

             [tex]=21.344^{\circ}[/tex]

⇒ [tex]\Theta_{max} = Sin^{-1} (\frac{\lambda}{d} )[/tex]

             [tex]=Sin^{-1} (\frac{700\times 10^{-9}}{1.099\times 10^{-6}} )[/tex]

             [tex]=39.56^{\circ}[/tex]

Answer:

1.621 kN

Explanation:

Since each horse pulls with a force of 839 N at an angle of 15° with the centerline of the canal, the horizontal component of the force due to the first horse along the canal is F= 839cos15° N and its vertical component is F' = 839sin15° N(it is positive since it is perpendicular to the centerline of the canal and points upwards).

The horizontal component of the force due to the second horse along the canal is f = 839cos15° N and its vertical component is f' = -839sin15° N (it is negative since it is perpendicular to the centerline of the canal and points downwards).

So, the resultant horizontal component of force R = F + f = 839cos15° N + 839cos15° N = 2(839cos15°) N = 2(839 × 0.9659) = 2 × 810.412 = 1620.82 N

So, the resultant vertical component of force R' = F' + f' = 839sin15° N + (-839sin15° N) = 839sin15° N - 839sin15° N = 0 N

The magnitude of the resultant force which is the sum of the two forces is R" = √(R² + R'²)

= √(R² + 0²)  (since R' = 0)

= √R²

= R  

= 1620.82 N

= 1.62082 kN

≅ 1.621 kN

So, the sum of these  two forces on the barge is 1.621 kN

At STP, 1 mole of an ideal gas occupies a volume of about 22.4 L. So if n is the number of moles of this gas, then

n / (19.2 L) = (1 mole) / (22.4 L)   ==>   n = (19.2 L•mole) / (22.4 L) ≈ 0.857 mol

If the sample has a mass of 12.0 g, then its molecular weight is

(12.0 g) / n ≈ 14.0 g/mol

Answer:

η = 0.5 = 50%

Explanation:

The efficiency of the power cycle is given by the following formula:

[tex]\eta = \frac{W}{Q_1}\\\\\eta = \frac{Q_1-Q_2}{Q_1}[/tex]

where,

where,

η = efficiency = ?

Q₁ = heat received from hot reservoir = 1000 KJ

Q₂ = heat discharged to cold reservoir = 500 KJ

Therefore,

[tex]\eta = \frac{1000\ KJ-500\ KJ}{1000\ KJ}[/tex]

η = 0.5 = 50%

Answer:

false?

Explanation:

The higher the modulus, the more stress is needed to create the same amount of strain; an idealized rigid body would have an infinite Young's modulus.

Answer:

I think the answer is False.

Explanation:

pls write the full question

Answer:

C is the right answer

Explanation:

fitness logs is a great way to track your progress. You can easily look back and see how you have progressed over time. In addition, it can help you plan and prepare for future workouts, as well as identify patterns of what seems to work well for you and when you have the most success

hope it was useful for you

Answer:

Distance traveled = 3 * 10E8 * 17.2 * 10E-9 = 5.16 m

.81 / 3 * 10E8 = 2.7 * 10E-9    normal time thru glass

(20.8 - 17.2) * E10-9 = 3.6 * 10E-9   additional time due to glass

c tg = c n ta      where tg and ta are the times spent in glass and air

(Note you can also write Va = n Vg  or  D / ta = n D / tg)

n = tg / ta = 3.6 / 2.7 = 1.33 the index of refraction of the glass

Wavelength (air) = Wavelength (glass) * n

Wavelenght = 560 nm / 1.33 = 421 nm

Answer:

24 meters

Explanation:

Find the final velocity. 12m/s

d=[final-initial]/2×time

D=(6m/s)×4=24 m/s

Answer:

v₂ = 15.24 m / s

Explanation:

This is an exercise in fluid mechanics

Let's write Bernoulli's equation, where the subscript 1 is for the factory pipe and the subscript 2 is for the tank.

          P₁ + ½ ρ v₁² + ρ g y₁ = P₂ + ½ ρ v₂² + ρ g y₂

They indicate the pressure in the factory P₁ = 140000 Pa, the velocity

v₁ = 5.5 m / s and the initial height is zero y₁ = 0

the tank is at a pressure of P2 = 2000 Pa and a height of y₂ = 6.0 m

          P₁ -P₂ + ρ g (y₁ -y₂) + ½ ρ v₁² = ½ ρ v₂²

let's calculate

         140,000 - 2000 + ρ 9.8 (0- 6) + ½ ρ 5.5² = ½ ρ v₂²

         138000 - ρ 58.8 + ρ 15.125 = ½ ρ v2²

         v₂² = 2 (138000 /ρ - 58.8 + 15.125)

         v₂ = [tex]\sqrt{\frac{276000}{\rho } - 43.675 }[/tex]

In the exercise they do not indicate what type of liquid is being used, suppose it is water with

           ρ = 1000 kg / m³

           v₂ = [tex]\sqrt{\frac{276000}{1000} - 43.675}[/tex]

           v₂ = 15.24 m / s

Answer:

Explanation:

Changing the resistance of a resistor means the resistance is either increased or decreased.

a. When the resistance of the resistor is increased, the value of current flowing through the circuit decreases.

Example: given voltage of 6V, and a resistance of 30 Ohm's. The value of current flowing in the circuit is;

V = IR

6 = I x 30

I = 0.2 A

If the resistance is changed to 50 Ohm's, then:

I = 0.12 A

(ii) When the resistance of the resistor is decreased, the value of the current flowing through the circuit increases.

In the previous example, if the resistance is changed to 5 Ohm's, then:

V = IR

6 = I x 5

I = 1.2 A

(b) The voltage of the battery does not change since it is directly proportional to the current flowing through the circuit. Consider the examples stated above.

Answer:

The electric potential energy is 6.72 x 10^-11 J.

Explanation:

Potential difference, V = 4.2 x 10^8 V

charge of electron, q = - 1.6 x 10^-19 C

Let the potential energy is U.

U = q V

U = 1.6 x 10^-19 x 4.2 x 10^8

U = 6.72 x 10^-11 J

Answer:

1) Law of Universal Gravitation     Gravity is an attractive force

5) General relativity               Gravity is due to the curvature of spacetime

Explanation:

In this exercise you are asked to relate the correct theory and its explanation

Theory Explanation

1) Law of Universal Gravitation              Gravity is an attractive force

2) Law of universal gravitation              Mass and distance affect force

3) Classical mechanics                           time and space are absolute

4) Special relativity                                 Time and space are relative

5) General relativity                                Gravity is due to the curvature of

                                                               spacetime

6) General relativity                                 Mass affects the curvature of space - time

Answer:

Explanation:

edge2022

Answer:

no, all substances doesnot conduct heat

Answer:

No, all substances do not conduct heat easily because it depends on the nature of the substance. Some are good conductors of heat and some are bad. Therefore, it depends on their characteristics and their ability to conduct heat.

The bad conductors of heat are water, air, plastic, wood, etc.

Gold, Silver, Copper, Aluminium, Iron, etc. are good heat conductors as well as electrical conductors.

Answer:

The change in the internal energy of the first system is 300 J

The second system will do zero work in order to have the same internal energy.

Explanation:

Given;

heat added to the first system, Q₁ = 500 J

heat added to the second system, Q₂ = 300 J

work done by the first system, W₁ = 200 J

The change in the internal energy of the system is given by the first law of thermodynamics;

ΔU = Q - W

where;

ΔU is the change in internal energy of the system

The change in the internal energy of the first system is calculated as;

ΔU₁ = Q₁ - W₁

ΔU₁ = 500 J - 200 J

ΔU₁ = = 300 J

The work done by the second system to have the same internal energy with the first.

ΔU₁ = Q₂ - W₂

W₂ = Q₂ - ΔU₁

W₂ = 300 J - 300 J

W₂ = 0

The second system will do zero work in order to have the same internal energy.