The retransmission policy should be adopted to help reduce the increasing congestion caused by devices attempting to resend lost packets too quickly or too often.
A retransmission policy is a technique that requires the sending of packets until an acknowledgment is received from the receiver. When a packet is sent, it is kept in the queue until an acknowledgment is obtained. If no acknowledgment is obtained, the packet is considered lost and is retransmitted.
This cycle of sending and resending packets causes congestion in the network. As a result, the retransmission policy should be implemented to reduce congestion caused by devices that attempt to resend lost packets too frequently or too quickly.
The issue of too many packets present in the network at the same time, slowing data transmission and affecting the quality of service, is known as congestion. Congestion causes packet loss, slows data transmission, and lowers service quality, which affects the user experience. The following are some common sources of network congestion:
Too much traffic in the network.Failure to keep up with traffic spikes.Network devices' processing power is limited.Poor network design.Packet loss occurs when one or more packets of data traveling through a network do not reach their intended destination. It may be caused by network congestion, poor network design, hardware failure, or packet corruption. When packet loss occurs, the data contained in the packet must be resent, resulting in increased network traffic, delays, and poor service quality.
You can learn more about retransmission at: brainly.com/question/28274178
#SPJ11
0.0% complete question a developer writes code for a new application, and wants to ensure protective countermeasures against the execution of sql injection attacks. what secure coding technique will provide this?
To protect against SQL injection attacks, the developer should use parameterized queries or prepared statements in their code.
Parameterized queries are a secure coding technique that involve separating the SQL query logic from the user input. This is done by using placeholders in the SQL statement where the user input should be inserted, and then providing the user input as a separate parameter to the query execution function.
Prepared statements are similar to parameterized queries, but they are pre-compiled on the server side and can be reused multiple times with different user input. This technique helps to prevent SQL injection attacks by separating the SQL query logic from the user input and ensuring that any user input is treated as data rather than executable code.
Both of these techniques help to ensure that user input is treated as data rather than executable code, which makes it much more difficult for attackers to inject malicious SQL code into the application. It's important to note that while these techniques can help to prevent SQL injection attacks, they should be used in combination with other secure coding practices, such as input validation and output encoding, to provide a comprehensive defense against attacks.
You can learn more about SQL injection attacks at
https://brainly.com/question/15685996
#SPJ11
Which of the following is an example of a circuit-switched network connection, as opposed to a packet-switched network connection?a. Two wireless computers using an ad hoc topologyb. A landline voice telephone callc. A smartphone connecting to a cellular towerd. Computers connected by a wired LAN
A landline voice telephone call is an example of a circuit-switched network connection, as opposed to a packet-switched network connection.
What is circuit-switched network?Circuit switching is a method of communication in which a dedicated, secure connection (or circuit) is established between two points on a network for the duration of the communication.
In this form of communication, a connection is created between two points in a network, allowing the two devices to exchange information. The connection is maintained throughout the duration of the communication, and data is transmitted via a dedicated communication path.
A landline voice telephone call is an example of a circuit-switched network connection because it establishes a dedicated, secure connection between two points (the caller and the receiver) for the duration of the call.
Packets of data do not need to be routed through a network and assembled at the receiving end since the connection is established in advance. In contrast to circuit switching, packet switching networks use packet switching technology to transmit data.
Learn more about circuit-switched network at
https://brainly.com/question/14748148
#SPJ11
Kaitlin likes a particular design theme, but she is not sure about every single color for bullets, backgrounds, etc. found in the theme. which feature should she apply to modify the theme to her liking? a. background style b. edit master slides c. theme variantsd. custom slide
The best particular design theme can be done through a few modifications using theme variants.
What is Theme Variant?
When a theme is applied to a presentation, the right corner of the Design tab displays variations of the selected theme.
Variants are different versions or designs of the currently selected theme Variations give your presentation a different look.
Why do we need theme variant?
Themes provide a quick and easy way to change the design of your presentation. They determine the basic color palette, basic fonts, slide layout and other important elements All elements of the theme work well together, meaning you spend less time formatting your presentation
To know more about theme visit:
https://brainly.com/question/20004132
#SPJ1
Data is being sent from a source PC to a destination server. Which three statements correctly describe the function of TCP or UDP in this situation? (Choose three.) 1. The TCP source port number identifies the sending host on the network 2. UDP segments are encapsulated within IP packets for transport across the network. 3. The source port field identifies the running application or service that will 4. The TCP process running on the PC randomly selects the destination port when 5. TCP is the preferred protocol when a function requires lower network
6. The UDP destination port number identifies the application or service on the handle data returning to the PC establishing a session with the server. overhead server which will handle the data.
The correct answer is TCP and UDP are two transport layer protocols that are used for sending data over a network. The following three statements correctly describe their functions:
The TCP source port number identifies the sending host on the network: TCP uses a 16-bit source port field to identify the sending process or application on the host. This helps the receiving host to identify the source of the data. UDP segments are encapsulated within IP packets for transport across the network: UDP does not have any built-in error recovery mechanism, so it simply encapsulates its segments within IP packets and sends them over the network. The source port field identifies the running application or service that will handle data returning to the PC establishing a session with the server: Both TCP and UDP use the source and destination port fields to identify the applications or services that will handle the data. The source port field helps the server to identify the process or application that sent the data and establish a session with the PC. In summary, TCP and UDP are transport layer protocols that use source and destination port numbers to identify the sending and receiving hosts and the applications or services that will handle the data. UDP simply encapsulates its segments within IP packets, while TCP establishes a reliable, connection-oriented session between the hosts.
To learn more about transport layer click on the link below:
brainly.com/question/27961606
#SPJ1
web sites provide access to specic types of useful information, such as maps and driving directions. a.educational b.reference c.product information d.news
The majority of the time, websites that offer travel- or educational-related material will have maps and driving instructions.
What do web-based documents typically go by?Web pages are the common name for web-based documents. T. Web servers are servers where websites are normally kept, or hosted. T. A URL that contains the HTTPS protocol denotes that the web page has finished, been sent, or been loaded.
What is a collaborative Web page intended for publishing and editing?A wiki is an online hypertext publication that is collaboratively revised and maintained by its own audience through the use of a web browser (/wki/ (listen) WIK-ee).
To know more about websites visit:-
https://brainly.com/question/19459381
#SPJ1
Answer:
The correct answer is b. reference.
What is a web site?
A web site is a collection of web pages. It contains multimedia content like text, images, videos, and interactive apps that are associated with a specific domain name and published on one or more web servers. A web site can be accessed via a web browser over the internet. It can be accessed using any internet-enabled device, including desktop computers, tablets, and mobile phones.
Explanation:
Web sites provide access to specific types of useful information, such as maps and driving directions, product information, news, and educational or reference contentProduct Information is a specific type of useful information that web sites provide. Product Information is any data about a product that a customer may want to know before purchasing it. It can include product features, specifications, price, availability, and reviews. Product Information is important to customers, especially when they're making purchasing decisions. It enables them to compare different products and make informed choices. Therefore, e-commerce and online retail websites usually provide detailed Product Information for their products.
To learn more about website from here:
https://brainly.com/question/2780939
#SPJ11
Which of the following is an important capability for sales processes that is found in most SFA modules in major CRM software products? A. Returns management B. Customer satisfaction management C. Channel promotions management D. Events management E. Lead management
The important capability for sales processes that is found in most SFA modules in major CRM software products is E. Lead management.
SFA and CRM- SFA stands for Sales Force Automation. The term refers to a computerized system used by salespeople to keep track of sales tasks, sales orders, customer interactions, and other sales-related tasks. On the other hand, CRM stands for Customer Relationship Management. It refers to software that businesses use to manage and analyze customer interactions and data throughout the customer lifecycle. It aids in the development of long-term customer relationships.
A lead is a prospective client or customer who expresses interest in the company's product or service. It is a potential customer for a company's product or service. As a result, lead management is a crucial element of SFA, and most CRM software products' SFA modules offer lead management as an important capability.
Therefore, the correct option is E. Lead management.
To learn more about "lead management", visit; https://brainly.com/question/31143811
#SPJ11
your instance is associated with two security groups. the first allows remote desktop protocol (rdp) access over port 3389 from classless inter-domain routing (cidr) block 72.14.0.0/16. the second allows http access over port 80 from cidr block 0.0.0.0/0. what traffic can reach your instance?
Your instance can receive traffic from port 3389 for RDP access from the CIDR block 72.14.0.0/16, and traffic from port 80 for HTTP access from all IPs, given the CIDR block 0.0.0.0/0.
The traffic that can reach your instance: Traffic from CIDR block 72.14.0.0/16 and from any IP to port 80. AWS security groups are like the iptables firewall. You can specify the allowed inbound and outbound traffic for an instance. When a security group is first created, there are no inbound or outbound rules enabled by default, which indicates that all inbound or outbound traffic to the instance is denied. This prevents your instances from being compromised by any unauthorized users, network scans, or remote control of your devices.
You can create a security group for your instance or launch an instance and pick the pre-existing security group. A security group's guidelines decide the inbound network traffic that it would allow into the instances it protects, as well as the outbound network traffic that those instances will transmit to other destinations. The following is the traffic that can reach your instance from the following security groups: Remote desktop protocol (RDP) access over port 3389 from CIDR block 72.14.0.0/16.HTTP access over port 80 from CIDR block 0.0.0.0/0.
Read more about the outbound :
https://brainly.com/question/15216234
#SPJ11
which of the following is a good practice to prevent your password from being vulnerable to attacks?a. Always use the same passwords across different sites so that you can easily remember them.b. Make sure to follow the links provided in emails to help you reset your passwords.c. Use simple passwords that use basic words and important numbers like your birthday.d. Create your passwords based on some algorithm that helps generate a password that uses a combination of letters, numbers and symbols.
Your passwords should be created using an algorithm that produces ones that combine letters, numbers, and symbols.
What makes a strong password algorithm?Experts advise using salt and a powerful, slow hashing algorithm like Argon2 or Bcrypt to secure passwords (or even better, with salt and pepper). (In essence, for this usage, avoid quicker algorithms.) to validate certificate and file signatures.
What is a strong password established in just 5 simple steps?All passwords should contain a mix of capital and lowercase letters, digits, and special characters . Avoid using names of individuals, pets, or words from the dictionary. It's also recommended to stay away from utilising important dates (birthdays, anniversaries, etc.).
To know more about algorithm visit:-
https://brainly.com/question/24452703
#SPJ1
In object-oriented design, objects may know how to communicate with one another across well-defined _______, but normally they are not allowed to know how other objects are implemented. This is known as information _______.
In object-oriented design, objects may know how to communicate with one another across well-defined interfaces, but normally they are not allowed to know how other objects are implemented. This is known as information hiding.
Object-oriented design is the design of software in which the software is constructed by defining objects and their relationships. The objects are independent units that can be used across multiple programs, reducing development time and increasing code reuse.
It is crucial to keep the objects independent and autonomous, meaning that they should be able to interact with one another without knowing how other objects are implemented. The objects communicate through interfaces that define the methods and properties that can be used by other objects. This allows the objects to be modified and improved without affecting the rest of the system.
The concept of information hiding is important in object-oriented design because it ensures that objects are encapsulated and that the system is modular. This makes the software easier to maintain, extend, and modify. Information hiding is achieved by defining clear interfaces for objects that separate the public interface from the implementation details. By keeping the implementation details hidden, objects can be changed and improved without affecting the rest of the system.
Learn more about object-oriented design:https://brainly.com/question/13383471
#SPJ11
Today, organizations are using personal computers for data presentation because personal computer use compared to mainframe use is morea. Controllable.b. Cost effective.c. Reliable.d. Conducive to data integrity.
The answer "cost-effective" is based on the fact that personal computers are less expensive to acquire, operate and maintain compared to mainframe computers. Option B is the correct answer.
They are also more scalable, allowing organizations to purchase and add capacity as needed, without the upfront costs associated with mainframes. Additionally, personal computers offer greater flexibility in terms of software and hardware choices, making it easier to customize and tailor solutions to specific business needs.
Finally, with the increasing availability of cloud-based services, personal computers can easily access powerful computing resources on-demand, without the need for on-premise hardware. All of these factors make personal computers a more cost-effective option for data presentation compared to mainframes.
Therefore, the correct naswer is b. Cost effective.
You can learn more about Cost effectiveness at
https://brainly.com/question/11888106
#SPJ11
You have been asked to work on the design of the cover of a new book. The author of the book would like to use a picture of a couple he has taken in the park. What needs to be done to use this image?
To use a picture of a couple in a park on the cover of a new book, the author must ensure that he has obtained the necessary permissions and licenses for the use of the image.
He needs to ensure that he owns the copyright to the image or has obtained the necessary license from the owner of the copyright. If the image contains identifiable people, the author must obtain their consent to use the image on the cover of the book. If the image contains recognizable elements such as buildings, logos, or trademarks, the author must ensure that he has obtained the necessary permissions and licenses to use these elements on the cover of the book.
Therefore, the author needs to obtain a copyright or necessary licenses for the use of the image. If the image contains identifiable people, the author must obtain their consent. If the image contains recognizable elements such as buildings, logos, or trademarks, the author must obtain the necessary permissions and licenses to use these elements on the cover of the book.
Learn more about graphic design and intellectual property rights:https://brainly.com/question/31146654
#SPJ11
Which of the following customer relationship management applications provides analysis of customer data? a. operational CRM b. analytical CRM c. supply chain execution system d. supply chain planning system
The customer relationship management application that provides analysis of customer data is the analytical CRM. The correct answer is b.
Customer Relationship Management, often known as CRM, is a business philosophy that puts the customer at the center of everything the organization does. It is a company-wide approach to building lasting customer relationships by collecting and analyzing data on their interactions with the organization.A customer relationship management system is a type of software that assists businesses in managing and automating their sales, marketing, and customer service activities. An effective CRM strategy can help businesses build long-term customer relationships, increase revenue, and improve customer retention.There are three types of CRM application: Operational, Analytical, and Collaborative.The type of CRM that provides analysis of customer data is the analytical CRM. It is a strategy that employs customer data mining to improve the way a company interacts with its clients. Its goal is to generate knowledge about clients and use it to improve interactions with them, ultimately resulting in greater customer satisfaction and loyalty.Analytical CRM relies on technologies such as data warehousing, data mining, and online analytical processing (OLAP) to extract and analyze data from various sources, such as point-of-sale (POS) systems, customer service records, social media, and other channels.Analytical CRM applications' primary function is to analyze customer data to provide insights into customer behavior and identify opportunities to improve the company's relationship with its customers. It helps businesses make more informed decisions, better understand their customers, and identify new opportunities for growth.The correct answer is b.Learn more about Analytical CRM here: https://brainly.com/question/15278271
#SPJ11
Select the correct answer.
Julian is preparing her profile for internships on a professional networking website. What advice regarding her teachers would help Julian in her
career?
OA. She should not expect teachers to provide recommendations.
O B.
Teachers may not be the best source for recommendations.
O C.
She should ask her teachers to write recommendations.
O D. Some teachers may make negative recommendations.
Reset
Next
Option C would be the best advice for Julian in preparing her profile for internships on a professional networking website.\
Who can write the recommendations for Julian?Teachers who have taught Julian and know her academic abilities and personal qualities can write strong and positive recommendations, which can help her stand out in the competitive internship market.
While it is true that some teachers may not be able to write strong recommendations, it is generally a good idea to ask them, as they can provide valuable insights into her skills and character.
Option A and D are not helpful as they do not offer any actionable advice and may even discourage Julian from seeking recommendations.
Read more about networking here:
https://brainly.com/question/1027666
#SPJ1
buying a ticket for a college football game where there are multiple windows to buy the ticket at features which type of queuing system line structure?
Buying a ticket for a college football game where there are multiple windows to buy the ticket at features a multiple queue or multi-line queuing system.
In a multiple queue system, there are multiple waiting lines, and each line is assigned to a specific service station or window. Customers choose the line they want to join based on their preferences, such as the length of the queue or the location of the service station.
In the case of buying a ticket for a college football game, each window represents a service station, and customers can choose to join the line for the window that they prefer or that has the shortest waiting time.
This type of queuing system is often used in settings where there are multiple service stations, such as in retail stores, banks, or amusement parks, to reduce waiting times and improve customer satisfaction.
You can learn more about queuing system at
https://brainly.com/question/17137414
#SPJ11
which of the following are practices that can be used to improve privacy when transacting bitcoin? group of answer choices make sure to use the same address multiple times. use coinjoin where multiple parties jointly create a transaction with several inputs and outputs. use a mixing service. use off-chain transactions such as lightning network.
Following are the practices that can be used to improve privacy when transacting Bitcoin: A: make sure to use the same address multiple times; B: use coinjoin where multiple parties jointly create a transaction with several inputs and outputs; C: use a mixing service; D: use off-chain transactions such as lightning network.
To improve privacy when transacting Bitcoin, it is important to avoid reusing the same address multiple times, as this can allow others to track your transactions and link them to your identity. Instead, it is recommended to use a new address for each transaction.Another technique that can be used to improve privacy is to use CoinJoin, which allows multiple parties to jointly create a transaction with several inputs and outputs, making it difficult to trace individual transactions.Using a mixing service is another option for improving privacy. These services mix your Bitcoin with that of other users, making it difficult to trace your transactions back to your identity.Finally, using off-chain transactions such as the Lightning Network can also improve privacy, as they do not require transactions to be broadcasted to the public blockchain, reducing the amount of information that is publicly available.You can learn more about Bitcoin at
https://brainly.com/question/9170439
#SPJ11
You manage the DNS infrastructure for your network. Server DNS1 holds a primary zone for the research.westsim.com domain. Server DNS2 holds a primary zone for the sales.westsim.com domain. Both servers are also domain controllers.
Computers configured to use DNS1 as the preferred DNS server are unable to resolve names for hosts in the sales.westsim.com domain. You need to enable DNS1 to resolve names for hosts in that domain. Your company security policy states that DNS zone transfers are not allowed between DNS1 and DNS2.
What should you do?
To enable DNS1 to resolve names for hosts in the sales.westsim.com domain, you should create a secondary zone for the sales.westsim.com domain on the DNS1 server without enabling zone transfers with DNS2.
The Domain Name System (DNS) is a hierarchical decentralized naming system for computers, services, or other resources connected to the Internet or a private network. It assigns domain names to various Internet resources, including computers, services, and other devices that are connected to the network. A primary zone is the first zone created by the DNS server that keeps the master copy of the zone and allows you to edit the zone data.What is a secondary zone?A secondary zone is a read-only copy of a primary zone, which means that any changes made to the zone are not replicated back to the primary zone. It is simply a copy of the zone data that is loaded from a primary zone.
Learn more about Domain Name System (DNS): https://brainly.com/question/14229442
#SPJ11
an organization uses a database management system (dbms) as a repository of data. the dbms in turn supports a number of end-user-developed applications. some of the applications update the database. in evaluating the control procedures over access and use of the database, the auditor will be most concerned that
The auditor will be most concerned that there are appropriate control procedures in place to ensure that only authorized users are allowed to access and modify the data stored in the database management system (DBMS).
What is database management system (dbms)?
A database management system (DBMS) is a computer software that manages the organization, storage, retrieval, and security of data within a database. DBMS may use different types of data models, such as relational or hierarchical, to organize and manage data. They also provide several security features and controls that protect data from unauthorized access and misuse. In this scenario, the auditor will be most concerned with the security features and access controls used by the DBMS to protect the organization's data.
These include ensuring that only authorized users can access the database, limiting the amount of data that a user can view or modify, implementing backup and recovery procedures to prevent data loss in case of system failure or cyber-attacks, and ensuring the integrity of data stored within the database. Overall, the auditor will be most concerned with the database management system's security and access controls to ensure that the data is protected from unauthorized access, misuse or loss.
Read more about the database:
https://brainly.com/question/518894
#SPJ11
When obtaining information on products and services from websites, discussion boards, and blogs, it is important NOT to assume that vendors' claims are accurate.
True or false
The given statement "When obtaining information on products and services from websites, discussion boards, and blogs, it is important NOT to assume that vendors' claims are accurate" is true because a vendor is a business or person who sells products or services to customers. They have no control over who purchases their products or services.
When consumers conduct research on the internet, it is critical that they are cautious and do not rely solely on a vendor's claims. The following are the reasons why it is crucial not to assume that vendor's claims are accurate:
Vendors may be biased: Vendors are biased because they have a vested interest in their products or services. They may exaggerate the benefits and downplay the drawbacks of their products to make a sale.Vendors may offer false claims: Vendors may make false claims about their products or services to attract clients. They could advertise a product that is not what it seems or that is ineffective.Vendors may have less experience: Some vendors may lack the necessary knowledge or experience to correctly market their products or services. They could exaggerate the product's features or understate the downsides. This might be due to a lack of knowledge or a deliberate effort to deceive clients.When obtaining information on products and services from websites, discussion boards, and blogs, it is important not to assume that vendors' claims are accurate. Consumers should do their research and seek third-party reviews or other credible sources of information before making a purchase.
You can learn more about vendor at: brainly.com/question/13135379
#SPJ11
t/f: The IT network that allows for the movement of organizational information within that company is known as the organizational structure
False. The IT network that allows for the movement of organizational information within that company is not known as the organizational structure.Organizational structure refers to the hierarchical arrangement of lines of authority, communications, rights and duties within an organization.
It establishes the patterns of communication, coordination, authority, and delegation among members of different departments and levels of management within the organization. In simple terms, it defines how a business is organized and who is responsible for different tasks and functions.
An IT network refers to the collection of hardware and software components that enable computer systems and devices to connect and communicate with one another within a company. It allows for the exchange of information, resources, and services, as well as the sharing of data between different departments and employees in a company. This network is responsible for the efficient flow of information between all levels of the organization, allowing for increased productivity and collaboration between teams.
For such more questions on organizational structure:
brainly.com/question/1178560
#SPJ11
. A list can be implemented as an IntList that uses a linked sequence of IntNodes or using an array of type int. Assume that an int takes up 4 bytes in memory, a reference takes up 4 bytes in memory, and an array A is defined to hold up to 200 ints.
(a) If a list has 180 integers in it, which method (array or linked list) is more efficient in terms of memory usage?
(b) If a list has 20 integers in it, which method (array or linked list) is more efficient in terms of memory usage?
(c) The array and linked list implementations require the same amount of memory if the list has how many elements? (Do not include head in this calculation.)
I want answers with explanations
A linked List is more efficient in terms of memory usage if a list has 180 integers. an array is more efficient than a linked list for a list that has 20 integers. An array and a linked list will require the same amount of memory if the list has 1 element.
(a) Linked List is more efficient in terms of memory usage if a list has 180 integers in it since an array of type int is defined to hold up to 200 ints. An array of size 200 x 4 bytes will consume 800 bytes of memory, whether we use all of the memory or not. While the linked list, which can use memory on a per-node basis, will consume just the right amount of memory that is required for the given number of nodes. Therefore, it will be more effective.
(b) In terms of memory use, an array is more efficient than a linked list for a list that has 20 integers. 20 x 4 bytes = 80 bytes are required for storing an array of 20 integers, whereas an array of 20 integers in the linked list will require 20 nodes x 8 bytes per node = 160 bytes, which is double the amount of memory required for an array.
(c) An array and a linked list will require the same amount of memory if the list has 1 element. A linked list with only one node will require 8 bytes of memory (4 bytes for data, 4 bytes for next reference), while an array with 1 integer element will require 4 bytes of memory.
To know more about the linked list: https://brainly.com/question/20058133
#SPJ11
Prior to ECMAScript 5, what would happen if you declared a variable named firstName and then later refered to it as firstname?
a. Firstname would be treated as a new local variable
b. Firstname would be treated as a new global variable
c.The JavaScript engine would throw an arror
d. The JavaScript enggine would automatically correct the error
It would be treated as a new global variable.
What would happen if you declared a variable named firstName and then later refered to it as firstname?
Prior to ECMAScript 5, if a variable named firstName was declared and then referred to as firstname later on, it would be treated as a new global variable.
What happens if a variable named firstName is declared and then referred to later as firstname?
This question is dealing with programming languages such as JavaScript, so a clear explanation of JavaScript will help to answer this question more effectively. Before ECMAScript 5, it was possible to create two different variables named "firstName" and "firstname" by mistake.
This error was recognized as a significant issue since it may result in unexpected program behavior.Therefore, when you declared a variable named "firstName" and then referred to it later as "firstname," it would be treated as a new global variable in JavaScript. It would be recognized as a different variable than the one previously defined, and it will not contain the same value as the original variable.
Learn more about JavaScript
brainly.com/question/28448181
#SPJ11
A) De acuerdo con el caso 1, ¿una cría de oveja tiene el mismo valor que un jarrón de chicha de jora?, ¿por qué?
In accordance with "caso 1," an egg doesn't have the same value as a jar of jora chicha. In Wari culture, the egg was a symbol of wealth and status, and the jar of jora chicha was a ceremonial drink of great cultural and religious significance.
The incident described in the context of Wari culture is referred to as "caso 1". A group of people are faced with a choice of whether to trade a cra de oveja (sheep) for a jarrón de chicha de jora (jar of fermented corn beer). In the Wari society, where the exchange of items was based on symbolic and cultural meaning rather than solely utilitarian or economic value, this scenario exemplifies cultural values and conventions. The first scenario demonstrates how exchanging things was a difficult procedure that was influenced by social hierarchies, cultural values, and the social significance of objects.
Learn more about "caso 1," here:
https://brainly.com/question/27822819
#SPJ4
what are the two main parts that make up an operating system? 1 point windows and mac kernel and userspace kernel and packages users and software
The two main parts that make up an operating system are the kernel and the userspace.
The kernel is the core component of the operating system that manages system resources such as CPU, memory, and input/output devices. It provides low-level services to other parts of the operating system and to applications running on the system.
The userspace is the part of the operating system where user applications and services run. It includes all of the software and libraries that are installed on the system, as well as the interfaces that allow applications to communicate with the kernel and access system resources.
Both the kernel and the userspace are essential components of an operating system, and they work together to provide a platform for running applications and managing system resources. Different operating systems have different designs and implementations for these components, but the basic concepts of kernel and userspace are common to all modern operating systems.
You can learn more about operating system at
https://brainly.com/question/22811693
#SPJ11
Can you use the syntax where [column name] (select * from [table name 2]) syntax when you want to compare a value of a column against the results of a subquery?
Yes, you can use the syntax [column name] IN (SELECT * FROM [table name 2]) when you want to compare a value of a column against the results of a subquery.
Subquery- A subquery is a SQL statement that is enclosed in parentheses and is used to complete a query condition's various parts. The statement in the parentheses is processed first, and the results are then used in the main query.
Using the syntax to compare a value of a column against the results of a subquery- The [column name] refers to the column you want to compare with the results of the subquery in parentheses.
SELECT * FROM [table name]WHERE [column name] IN (SELECT * FROM [table name 2]);
The above is the structure of the syntax where you can see how the syntax is constructed.
"syntax", https://brainly.com/question/31143394
#SPJ11
How can we improve the following program?
function start() {
move();
move();
move();
move();
move();
move();
move();
move();
move();
}
Answer:
Your professor may be looking for something simple. I am not sure the caliber your professor is expecting. But for a basic. You could make a simple loop to improve the code.
function start() {
for (var i = 0; i < 9; i++) {
move();
}
}
With less text, this code will do the same task as the original program. We can prevent repeatedly repeating the same code by utilizing a loop.
From there you could make the moves dynamic...
function start(numMoves) {
for (var i = 0; i < numMoves; i++) {
move();
}
}
This passes the number of mes as an argument..the code will move forward a specified number of times based on the value of the numMoves parameter.
Then from there we could add error handling to have it catch and handle any errors that may occur. This of course is if the move() function displays an error.
function start(numMoves) {
try {
for (var i = 0; i < numMoves; i++) {
move();
}
} catch (e) {
console.error(e);
}
}
BONUS
Here is a combined executable code...explanation below...
// Define the move function
function move() {
console.log("Moving forward");
}
// Define the start function
function start(numMoves) {
try {
for (var i = 0; i < numMoves; i++) {
move();
}
} catch (e) {
console.error(e);
}
}
// Call the start function with 9 as an argument
start(9);
Explanation for bonus:
The move() and start() functions are defined in the code.
A message indicating that the object is moving forward is logged to the console by the straightforward move() function. The start() function calls this function.
Start() only accepts one argument, numMoves, which defines how many times to advance the object. To deal with any errors that might arise when calling the move() method, the function employs a try...catch block.
Based on the value of numMoves, the move() method is called a given number of times using the for loop.
Lastly, the object is advanced nine times by calling the start() procedure with the value 9.
This code requires that the move() function is defined someplace else in the code, or is provided by the environment where the code is being executed (such as a browser or Node.js).
When this code is executed, the start() function is invoked with the input 9 and the object is advanced nine times. Every time the loop executes, the move() function is invoked, which reports a message to the console indicating that the object is moving ahead. Any mistakes that can arise when invoking the move() function are caught and recorded to the console thanks to the try...catch block.
Select the most efficient processing order for the Boolean query Q.
Q: "web AND ranked AND retrieval".
ranked 623,146
web 154,384
retrieval 483,259
A. (web AND ranked) first, then merge with retrieval.
B. (web AND retrieval) first, then merge with ranked.
C. (retrieval AND ranked) first, then merge with web.
D. Any combination would result in the same amount of operations.
The most efficient processing order for the Boolean query Q "web AND ranked AND retrieval" is to perform "Option A" (web AND ranked) first, then merge with retrieval.
The reason why the option A is correct is that a logical conjunction involves computing the intersection of two postings lists. In this case, it is ideal to start with the posting list that has the smallest size to minimize the time it takes to merge with other posting lists.
The size of the postings lists of each term are as follows:
web 154,384ranked 623,146retrieval 483,259Therefore, the most efficient processing order is to start with (web AND ranked), whose size is 42,759 documents. Then, this merged posting list is merged with retrieval, whose size is 39,924 documents. This will result in a posting list of 10,420 documents that satisfies the query "web AND ranked AND retrieval." Thus, option A "(web AND ranked) first, then merge with retrieval" is correct.
Learn more about processing: https://brainly.com/question/14222695
#SPJ11
evaluate this sql statement: select manufacturer id, count(*), order date from inventory where price > 5.00 group by order date, manufacturer id having count(*) > 10 order by order date desc; which clause specifies which rows will be returned from the inventory table? a. select manufacturer id, count(*), order date b. where price > 5.00 c. group by order date, manufacturer id d. order by order date desc e. having count(*) > 10
The clause that specifies which rows will be returned from the inventory table is the (b) where price >5.00.
Here's how to evaluate the SQL statement:
In the SQL statement, the select clause specifies the columns to be shown in the query. This query selects the manufacturer id, count(*), and order date from the inventory table.
Where price is greater than 5.00 is the condition in the where clause. This means that only rows that have a price greater than 5.00 will be returned. The group by clause is used to group rows with the same manufacturer id and order date together.
The having clause is used to filter the groups produced by the group by clause. The groups with more than ten rows are returned by this query, thanks to the having count(*) > 10 clause. The results are sorted in descending order by the order date column, thanks to the order by order date desc clause.
Thus, the correct option is (b) where price > 5.00.
To learn more about "manufacturer id", visit: https://brainly.com/question/31143426
#SPJ11
Assume that array arr has been defined and initialized with the values {5, 4, 3, 2, 1}. What are the values in array arr after two passes of the for loop(i.e., when j = 2 at the point indicated by /* end of for loop */)?
a. {2, 3, 4, 5, 1}
b. {3, 2, 1, 4, 5}
c. {3, 4, 5, 2, 1}
d. {3, 5, 2, 3, 1}
e. {5, 3, 4, 2, 1}
The correct option is c. {3, 4, 5, 2, 1} for array arr has been defined and initialized with the values {5, 4, 3, 2, 1}.
Here is an example program with array arr initialized and the output after 2 passes:int[] arr = {5, 4, 3, 2, 1};
for (int i = 0; i < 2; i++)
{
for (int j = 0; j < arr.length - 1; j++)
{
if (arr[j] > arr[j + 1])
{
int temp = arr[j + 1];
arr[j + 1] = arr[j];
arr[j] = temp;
}
} /* end of the inner for loop */
} /* end of outer for loop */`
The program below initializes an array, arr, of 5 elements with values {5, 4, 3, 2, 1}. It uses a nested loop to repeatedly compare adjacent elements in the array, and swap them if they are in the wrong order.The outer loop repeats the inner loop twice.When the outer loop is finished, the program outputs the final contents of the array. Therefore, the initial array {5, 4, 3, 2, 1} will be sorted in two passes of the inner for loop, and the resulting array is {3, 4, 5, 2, 1}.The correct option is c. {3, 4, 5, 2, 1}Learn more about an array here: https://brainly.com/question/28061186
#SPJ11
What are the likely causes of syntax errors? Choose all that apply.
reversed or missing parentheses, brackets, or quotation marks
spaces where they should not be
properly spelled and capitalized command words
command words that are misspelled or missing required capitalization
A, B, D
Last one is the correct answer to this question
Explanation:
syntax error are mistakes in the source codesuch as spellings and punctuation errors,incorrect labels and so on ..
which type of relationship is depicted between building and school? public class building { private int squarefeet ; } public class school extends building { private string schooldistrict ; } question 10 options: has-a is-a contains-a there is no relationship between the two classes
The type of relationship depicted between the building and the school is "is-a."
A class can be based on another class, known as inheritance. A class that is dependent on another class is referred to as the derived class, and the class that it inherits from is referred to as the base class.
The relationship between the two classes is frequently referred to as a is-a relationship since it is one of the fundamental tenets of object-oriented programming. Here, public class school is based on public class building.
As a result, it is derived from the base class. Therefore, the type of relationship depicted between the building and the school is "is-a."A public class building has a single member variable named square feet that is private.
A public class school is based on a building, which indicates that it has all of the features of a building while also adding new characteristics such as school district. Thus, it is possible to access the square foot variable with the help of inheritance.
To know more about inheritance:https://brainly.com/question/15078897
#SPJ11
