Which of the following elements is in the same group as Sulfur (S)?

Answer:

acetic acid and phosphoric acid

Explanation:

After refluxing the reaction mixture ( synthesis of isoamyl acetate ) what is likely present in the solution is acetic acid and phosphoric acid, this due to the fact that if the reaction time between the reactants was less than the refluxing time which is 25 minutes,

there will be no reactant ( 3-methylbutanol )left in the reaction mixture

Answer:

AgBr

Explanation:

Silver bromide has a very low solubility product constant of about 7.7 ×10^-13 in pure water hence it is not quite soluble in pure water.

However, with NaCN, the AgBr forms the complex [Ag(CN)2]^2- which has a formation constant of about 5.6 ×10^8. This very high formation constant implies that the complex is easily formed leading to the dissolution of AgBr in NaCN.

The equation for the dissolution of AgBr in cyanide is shown below;

AgBr(s) + 2CN^-(aq) ----> [Ag(CN)2]^2-(aq) + Br^-(aq)

Answer:

550mL of HCOOH 0.1M and 450mL of HCOONa 0.1M

Explanation:

It is possible to find the pH of a buffer by using H-H equation:

pH = pKa + log [A⁻]/[HA]

For the formic buffer (HCOOH/HCOONa):

pH = 3.74 + log [HCOONa]/[HCOOH]

As you need a buffer of pH 3.65:

pH = 3.74 + log [HCOONa]/[HCOOH]

3.65 = 3.74 + log [HCOONa]/[HCOOH]

Where  [HCOONa]/[HCOOH] can be taken as the moles of each specie.

As molarity of both solutions is 0.10M (0.10mol / L) and you need 1L of solution, total moles of the buffer are:

Replacing (2) in (1):

0.81283 = 0.10 - [HCOOH]  /[HCOOH]

0.81283[HCOOH] = 0.10 - [HCOOH]

1.81283[HCOOH] = 0.10

And moles of HCOONa are:

[HCOONa] = 0.1 mol - 0.055mol =

As concentration of the solutions is 0.1M, the volume you need to add of both solutions is:

HCOOH = 0.055 mol ₓ (1L / 0.1mol) = 0.55L = 550mL of HCOOH 0.1M

HCOONa = 0.045 mol ₓ (1L / 0.1mol) = 0.45L = 450mL of HCOONa 0.1M

The number should be considered like 550mL of HCOOH 0.1M and 450mL of HCOONa 0.1M.

Here we used the H-H equation:

pH = pKa + log [A⁻]/[HA]

Now

For the formic buffer (HCOOH/HCOONa):

So,

pH = 3.74 + log [HCOONa]/[HCOOH]

Now

need a buffer of pH 3.65:

So,

pH = 3.74 + log [HCOONa]/[HCOOH]

3.65 = 3.74 + log [HCOONa]/[HCOOH]

0.81283 = [HCOONa]/[HCOOH] (1)

here  [HCOONa]/[HCOOH] can be considered as the moles of each specie.

Now the total moles should be

0.10 moles = [HCOONa] + [HCOOH] (2)

Now

0.81283 = 0.10 - [HCOOH]  /[HCOOH]

0.81283[HCOOH] = 0.10 - [HCOOH]

1.81283[HCOOH] = 0.10

[HCOOH] = 0.055 moles

And moles of HCOONa should be

[HCOONa] = 0.1 mol - 0.055mol =

[HCOONa] = 0.045 moles

Now

HCOOH = 0.055 mol ₓ (1L / 0.1mol) = 0.55L = 550mL of HCOOH 0.1M

HCOONa = 0.045 mol ₓ (1L / 0.1mol) = 0.45L = 450mL of HCOONa 0.1M

Learn more about moles here: https://brainly.com/question/2154505

Answer:

The ΔG° is 29 kJ and the reaction is favored towards reactant.

Explanation:

Based on the given information, the ΔH°rxn or enthalpy change is 41.2 kJ, the ΔS°rxn or change in entropy is 42.1 J/K or 42.1 * 10⁻³ kJ/K. The temperature given is 289 K. Now the Gibbs Free energy change can be calculated by using the formula,  

ΔG° = ΔH°rxn - TΔS°rxn

= 41.2 kJ - 289 K × 42.1 × 10⁻³ kJ/K

= 41.2 kJ - 12.2 kJ

= 29 kJ

As ΔG° of the reaction is positive, therefore, the reaction is favored towards reactant.  

Answer:

Zinc- anode

Copper- cathode

Sodium sulphate- salt bridge

Explanation:

A galvanic cell is an electrochemical cell in which electrical energy is produced by a spontaneous chemical reaction.

In the pictured galvanic cell, zinc is the anode since it looses electrons according to the reaction; Zn(s) -----> Zn^2+(aq) + 2e

Copper is the cathode as shown here; Cu^2+(aq) + 2e ----> Cu(s)

Sodium sulphate functions as the salt bridge. It keeps the both solutions neutral by ensuring charge balance in the both half cells.

Answer:

zinc=anode

copper=cathode

Explanation:

Answer: 1.2 millimoles will be left after 2250 years

Explanation:

Expression for rate law for first order kinetics is given by:

[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]

where,

k = rate constant

t = age of sample

a = let initial amount of the reactant

a - x = amount left after decay process  

a) for completion of half life:

Half life is the amount of time taken by a radioactive material to decay to half of its original value.

[tex]t_{\frac{1}{2}}=\frac{0.693}{k}[/tex]

[tex]k=\frac{0.693}{5730}=0.00012years^{-1}[/tex]

b) Amount left after 2250 years

[tex]2250=\frac{2.303}{k}\log\frac{1.6}{a-x}[/tex]

[tex]2250=\frac{2.303}{0.00012}\log\frac{1.6}{a-x}[/tex]

[tex]\log\frac{1.6}{a-x}=0.117[/tex]

[tex]\frac{1.6}{a-x}=1.31[/tex]

[tex]{a-x}=\frac{1.6}{1.31}=1.2[/tex]

Thus 1.2 millimoles will be left after 2250 years

Answer:

Explanation:

Fe2+ Has 4 unpaired electrons.

By method of elimination;

Option A: Ni2+ has two unpaired electrons. so this option is wrong.

Option B: There are 5 unpaired electrons in the Fe3+ ion. so this option is wrong.

Option C: There are 4 unpaired electrons in the Cr2+ ion. so this option is correct.

Option D: There are 5 unpaired electrons in the Mn2+ ion. so this option is wrong.

Option E: There are 3 unpaired electrons in the Co2+ ion. so this option is wrong.

Answer:I think it's Geosphere

Explanation:

Answer:

A

Explanation:

Geo means rock, or earth. Hydro means water, Atmosphere is space, and Bio global ecosystem composed of living organisms

Answer:

89%.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

2Li + 2H2O —> 2LiOH + H2

Next, we shall determine the masses of Li and H2O that reacted and the mass of LiOH produced from the balanced equation.

This is illustrated below:

Molar mass of Li = 7 g/mol

Mass of Li from the balanced equation = 2 x 7 = 14 g

Molar mass of H2O = (2x1) + 16 = 18 g/mol

Mass of H2O from the balanced equation = 2 x 18 = 36 g

Molar mass of LiOH = 7 + 16 + 1 = 24 g/mol

Mass of LiOH from the balanced equation = 2 x 24 = 48 g

Summary:

From the balanced equation above,

14 g of Li reacted with 36 g of H2O to produce 48 g of LiOH.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

14 g of Li reacted with 36 g of H2O.

Therefore, 7.4 g of Li will react with = (7.4 x 36)/14 = 19.03 g of H2O.

From the calculation made above, we can see that it will take a higher amount i.e 19.03 g than what was given i.e 10.2 g of H2O to react completely with 7.4 g of Li.

Therefore, H2O is the limiting reactant and Li is the excess reactant.

Next, we shall determine the theoretical yield of LiOH.

In this case we shall use the limiting reactant.

The limiting reactant is H2O and the theoretical yield of LiOH can be obtained as follow:

From the balanced equation above,

36 g of H2O reacted to produce 48 g of LiOH.

Therefore, 10.2 g of H2O will react to produce = (10.2 x 48)/36 = 13.6 g of LiOH.

Therefore, the theoretical yield of LiOH is 13.6 g

Finally, we shall determine the percentage yield of LiOH. This can be obtained as follow:

Actual yield = 12.1 g

Theoretical yield = 13.6 g

Percentage yield =..?

Percentage yield = Actual yield /Theoretical yield x 100

Percentage yield = 12.1/ 13.6 x 100

Percentage yield = 89%

Therefore, the percentage yield LiOH is 89%.

Answer:

Organic chemist? I do not know.

Explanation:

Thanks you.

The type of chemist exclusively studies most carbon compounds are organic chemist. Therefore, option C is correct.

The structure, characteristics, and reactivity of compounds containing carbon are studied by organic chemists. Additionally, they create novel organic materials with distinct features and uses.

Analytical capabilities, communication skills, and numeracy skills are three of the most important soft skills for an organic chemist.

Organic chemists often work in research and development in labs at universities, pharmaceutical, industrial, and biotechnology businesses, as well as government agencies, according to the American Chemical Society.

According to one assessment, organic chemistry is the hardest college course. According to certain statistics, almost one out of every two students in organic chemistry leave the course. The hopes of a medical career come tumbling down for those who fit this description. Organic chemistry is undoubtedly challenging.

Thus, option C is correct.

To learn more about an organic chemist, follow the link;

https://brainly.com/question/1674101

#SPJ5

Answer:

A) when the titration is nearing the end point in titration the color of the solution starts to change and the change in color does not disappear as fast as it was during the beginning of the titration  

B) The volume of NaOH required to permanently change the indicator at the end point is  a  drop of NaOH

c) The volume required by samples #2 and #3 will be the same i.e 19.90 mL of NaOH, if the concentration of KHP base used for the samples are the same

D) The volume required by samples #2 and #3 will be the same i.e 29.05 mL OF NaOH, if the concentration of Vinegar and base for the samples are the same

Explanation:

A) when the titration is nearing the end point in titration the color of the solution starts to change and the change in color does not disappear as fast as it was during the beginning of the titration  

B) The volume of NaOH required to permanently change the indicator at the end point is  a  drop of NaOH

c) The volume required by samples #2 and #3 will be the same i.e 19.90 mL of NaOH, if the concentration of KHP base used for the samples are the same

D) The volume required by samples #2 and #3 will be the same i.e 29.05 mL OF NaOH, if the concentration of Vinegar and base for the samples are the same

Answer: Gamma Radiation

Explanation:

The emission of Gamma rays does not cause a change in both the atomic and mass number. They are  electromagnetic radiation.

The radiations that leaves without changing the atomic mass and atomic number of the particle have been gamma radiations. Thus, option D is correct.

Radiations have been the energy that has been evolved by the particles during energy transitions. The nuclear decay results with the release of the energy from the particle resulting in the change in the atomic mass.

The electromagnetic radiations have been capable of emitting the radiation without changing the mass and atomic number of the element. The gamma radiations have been the electromagnetic radiations. Thus, option D is correct.

For more information about the emissions, refer to the link:

https://brainly.com/question/517329

Answer:

2.8x10⁻¹⁵ M.

Explanation:

Hello,

In this case, the dissociation reaction for silver phosphate is:

[tex]Ag_3PO_4(s)\rightleftharpoons 3Ag^+(aq)+PO_4(aq)[/tex]

Therefore, the equilibrium expression is:

[tex]Ksp=[Ag^+]^3[PO_4^-][/tex]

In such a way, since the initial solution contains an initial concentration of silver ions (from silver nitrate) of 0.10M, we can write the equilibrium expression in terms of the reaction extent [tex]x[/tex]:

[tex]2.8x10^{-18}=(0.10+3x)^3*(x)[/tex]

Thus, solving for [tex]x[/tex] we have:

[tex]x=2.8x10^{-15}M[/tex]

Thus, the molar solubility of silver phosphate is 2.8x10⁻¹⁵ M.

Regards.

Answer:

a. In the nickel-aluminum galvanic cell, the cathode is nickel electrode.

b. Therefore electrons flow from the aluminium electrode to the nickel electrode.

c. The aluminium electrode loses mass, while the nickel electrode electrode gains mass.

Explanation:

Voltaic or galvanic cells are electrochemical cells in which spontaneous oxidation-reduction reactions. The two halves of the redox reaction are separate and electron transfer is required to occur through an external circuit for the redox reaction to take place. That is, one of the metals in one of the half cells is oxidized while the metal of the other half cell is reduced, producing an exchange of electrons through an external circuit. This makes it possible to take advantage of the electric current.

Given:

E ⁰N i ⁺² = − 0.23 V   is the standard reduction potential for the nickel ion

E ⁰  A l ⁺³ =  − 1.66  V  is the standard reduction potential for the aluminum ion

The most negative potentials  correspond to more reducing substances. In this case, the aluminum ion is the reducing agent, where oxidation takes place. In the anodic half cell oxidations occur, while in the cathode half cell reductions occur. So the aluminum cell acts as the anode while the nickel cell acts as the cathode.

So a. In the nickel-aluminum galvanic cell, the cathode is nickel electrode.

The metal that is oxidized gives electrons to the metal that is reduced through the outer conductor. Then the electrons flow spontaneously from the anode to the cathode.

Then b. Therefore electrons flow from the aluminium electrode to the nickel electrode.

Ni⁺², being the cathode, accepts electrons, becoming Ni (s) and depositing on the Ni electrodes.

So, c. The aluminium electrode loses mass, while the nickel electrode electrode gains mass.

Answer:

Buffer is the chemical substance that addition of acids and bases, maintaining constant environment,its called Buffer.

Explanation:

Answer:

0.52 g of chromium(II) hydroxide, Cr(OH)2.

Explanation:

We'll begin by calculating the number of mole of chromium (ii) chloride, CrCl2 in 35.9 mL of 0.258 M chromium(II) chloride solution.

This can be obtained as follow:

Molarity of CrCl2 = 0.258 M

Volume = 35.9 mL = 35.9/1000 = 0.0359 L

Mole of CrCl2 =?

Molarity = mole /Volume

0.258 = mole of CrCl2 /0.0359

Cross multiply

Mole of CrCl2 = 0.258 x 0.0359

Mole of CrCl2 = 0.0093 mole

Next, we shall determine the number of mole of potassium hydroxide, KOH in 35.8 mL 0.338 M potassium hydroxide solution.

This can be obtained as follow:

Molarity of KOH = 0.338 M

Volume = 35.8 mL = 35.8/1000 = 0.0358 L

Mole of KOH =.?

Molarity = mole /Volume

0.338 = mole of KOH /0.0358

Cross multiply

Mole of KOH = 0.338 x 0.0358

Mole of KOH = 0.0121 mole.

Next, we shall write the balanced equation for the reaction. This is given below:

2KOH + CrCl2 → Cr(OH)2 + 2KCl

From the balanced equation above,

2 mole of KOH reacted with 1 mole of CrCl2 to produce 1 mole of Cr(OH)2.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

2 mole of KOH reacted with 1 mole of CrCl2.

Therefore, 0.0121 mole of KOH will react with = (0.0121 x 1)/2 = 0.00605 mole of CrCl2.

From the calculations made above, we can see that only 0.00605 mole out of 0.0093 mole of CrCl2 is needed to react completely with 0.0121 mole of KOH.

Therefore, KOH is the limiting reactant.

Next, we shall determine the number of mole of Cr(OH)2 produced from the reaction.

In this case, we shall be using the limiting reactant because it will give the maximum yield of Cr(OH)2.

The limiting reactant is KOH and the number of mole of Cr(OH)2 produced can be obtained as illustrated below:

From the balanced equation above,

2 mole of KOH reacted to produce 1 mole of Cr(OH)2.

Therefore, Therefore, 0.0121 mole of KOH will react with = (0.0121 x 1)/2 = 0.00605 mole of Cr(OH)2.

Finally, we shall convert 0.00605 mole of Cr(OH)2 to grams.

This is illustrated below:

Mole of Cr(OH)2 = 0.00605 mole

Molar mass of Cr(OH)2 = 52 + 2(16 + 1) = 52 + 2(17) = 86 g/mol

Mass of Cr(OH)2 =..?

Mole = mass /Molar mass

0.00605 = mass of Cr(OH)2/86

Cross multiply

Mass of Cr(OH)2 = 0.00605 x 86

Mass of Cr(OH)2 = 0.52 g

Therefore, 0.52 g of chromium(II) hydroxide, Cr(OH)2 was produced.

Answer:

what does little birdie say in the birth of their differences lak lak lak nu pasand aayi baby sleep are no longer children all strong industry all strong baby to show the meaning of rice is here to get up from sleep meaning of lips is Hasan let the mother is saying the baby to sleep in a new

Taking into account the definition of molarity and the molar mass of the compound, the correct answer is option (d): the mass of FeSO₄.7H₂O required for preparation of 125 mL of 0.90 M  solution is 31 g.

In first place, you have to know tha molarity is a measure of the concentration of that substance that indicates the number of moles of solute present in the solution.

The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution.

[tex]molarity=\frac{number of moles of solute}{volume of solution}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].

In this case, you know:

So, by definition of molarity, the number of moles is calculated as:

[tex]0.90 M=\frac{number of moles of solute}{0.125 L}[/tex]

Solving:

number of moles of solute= 0.90 M× 0.125 L

number of moles of solute= 0.1125 moles

On the other side, molar mass is the mass of one mole of a substance, which can be an element or a compound. In this case, the molar mass of FeSO₄.7H₂O is 277.85 [tex]\frac{g}{mole}[/tex].

Then you can apply the following rule of three: if by definition of molar mass, 1 mole of the compound contains 277.85 g, 0.1125 mole contains how much mass?

[tex]mass=\frac{0.1125 moles*277.85 g}{1 mole}[/tex]

Solving:

mass ≅ 31 g

Finally, the correct answer is option (d): the mass of FeSO₄.7H₂O required for preparation of 125 mL of 0.90 M  solution is 31 g.

Learn more about molarity with this example: brainly.com/question/15406534?referrer=searchResults

Answer:

The correct answer is 2.2 mL.

Explanation:

Given:

Average: 2.9 mL

SD: 0.71 mL

We can define a 1 SD range in which the value of volume (in mL) will be comprised:

Volume (mL) = Average ± SD = (2.9 ± 0.7) mL

Maximum value= Average + SD= 2.9 + 0.7 mL = 3.6 mL

Minimum value= Average - SD = 2.9 - 0.7 mL = 2.2 mL

Thus, the minimum value within a 1 SD range of the average is 2.2 mL

The minimum value within 1 SD is 2.19 mL

The z score is used to determine by how many standard deviations the raw score is above or below the mean. The z score is given by:

[tex]z=\frac{x-\mu}{\sigma} \\\\where\ x\ is\ raw\ score, \mu=mean,\sigma=standard\ deviation[/tex]

Given that μ = 2.9 mL, σ = 0.71 mL; hence:

The minimum value within 1 SD range = μ ± σ = 2.9 ± 0.71 = (2.19, 3.61)

Therefore the minimum value within 1 SD is 2.19 mL

Find out more at: https://brainly.com/question/23907081

Answer:

Explanation:

MnO₂(s) + 4 HCl(aq)  = MnCl₂(aq) + 2 H₂O(l) + Cl₂

87 g                                                                     22.4 x 10³ mL

volume of given chlorine gas at NTP or at 760 Torr and 273 K

=  175 x ( 273 + 25 ) x 715 / (273 x 760 )

= 179.71 mL

22.4 x 10³ mL of chlorine requires 87 g of MnO₂

179.4 mL of chlorine will require    87 x 179.4 / 22.4 x 10³ g

= 696.77 x 10⁻³ g

= 696.77 mg .

Answer: The standard cell potential for the cell is +0.51 V

Explanation:

Given : [tex]E^0_{Ni^{2+}/Ni}=-0.25V[/tex]

[tex]E^0_{Zn^{2+}/Zn}=-0.76V[/tex]

The given reaction is:

[tex]Ni^{2+}(aq)+Zn(s)\rightarrow Zn^{2+}(aq)+Ni(s)[/tex]

As nickel is undergoing reduction, it acts as cathode and Zinc is undergoing oxidation, so it acts as anode.

[tex]E^0_{cell}=E^0_{cathode}-E^0_{anode}[/tex]

where both [tex]E^0[/tex]  are standard reduction potentials.

Thus putting the values we get:

[tex]E^0_{cell}=-0.25-(-0.76)[/tex]

[tex]E^0_{cell}=0.51V[/tex]

Thus the standard cell potential for the cell is +0.51 V

Answer:

ethyl 4-bromobenzoate

Explanation:

In this question, we can start with the Index of Hydrogen Deficiency (I.H.D):

[tex]I.H.D=\frac{2C+2+N-H-X}{2}=\frac{(2*9)+2+0-9-1}{2}~=~5[/tex]

This indicates, that we can have a benzene ring (I.H.D = 4) and a carbonyl group (I.H.D = 1), for a total of 5.

Additionally, in the 1H-NMR info, we have a triplet 1.39 (3H) followed by a doublet 4.38 (2H), this indicates the presence of an ethyl group ([tex]CH_3-CH_2-[/tex]). Also, in the formula, we have 2 oxygens if we have carbonyl group with 2 oxygens we have a high probability to have an ester group.

[tex]O=C-O-CH_2-CH_3[/tex]

Now, if we add this to the benzene ring and the "Br" atom that we have in the formula, we will have ethyl 4-bromobenzoate.

See figures 1 and 2 to further explanations.

I hope it helps!

Answer:

7.50 L

Explanation:

The balloon has a volume of 1.20 L (V₁) when the pressure at the sea floor is 6.25 atm (P₁). When it reaches the surface, the pressure is that of the atmosphere, that is, 1.00 atm (P₂). If we consider the gas to behave as an ideal gas and the temperature to be constant, we can calculate the final volume (V₂) using Boyle's law.

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁ / P₂

V₂ = 6.25 atm × 1.20 L / 1.00 atm

V₂ = 7.50 L

Answer:

c

Explanation:

How many moles of gold are equivalent to 1.204 × 1024 atoms?

0.2

0.5

2

5

C) 2 Is the correct answer, I took the test and it was correct.

According to the concept of Avogadro's number, there are 2 moles of gold which are equivalent to 1.204×10²⁴ atoms.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number.Number of moles=number of atoms/Avogadro's number=1.204×10²⁴ /6.023×10²³=1.999≅2

Thus, there are 2 moles of gold which are equivalent to 1.204×10²⁴ atoms.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ3

Answer:

Corrective lense or just lens.

Explanation:

Answer:

[Cu²⁺] = 2.01x10⁻²⁶

Explanation:

The equilibrium of Cu(CN)₄²⁻ is:

Cu²⁺ + 4CN⁻ ⇄ Cu(CN)₄²⁻

And Kf is defined as:

Kf = 1.0x10²⁵ = [Cu(CN)₄²⁻] / [Cu²⁺] [CN⁻]⁴

As Kf is too high you can assume all Cu²⁺ is converted in Cu(CN)₄²⁻ -Cu²⁺ is limiting reactant-, the new concentrations will be:

[Cu²⁺] = 0

[CN⁻] = 0.33M - 4×2.2x10⁻³ = 0.3212M

[Cu(CN)₄²⁻] = 2.2x10⁻³

Some [Cu²⁺] will be formed and equilibrium concentrations will be:

[Cu²⁺] = X

[CN⁻] = 0.3212M + 4X

[Cu(CN)₄²⁻] = 2.2x10⁻³ - X

Where X is reaction coordinate

Replacing in Kf equation:

1.0x10²⁵ = [2.2x10⁻³ - X] / [X] [0.3212M +4X]⁴

1.0x10²⁵ = [2.2x10⁻³ - X] / 0.0104858X + 0.524288 X² + 9.8304 X³ + 81.92 X⁴ + 256 X⁵

1.04858x10²³X + 5.24288x10²⁴ X² + 9.8304x10²⁵ X³ + 8.192x10²⁶ X⁴ + 2.56x10²⁷ X⁵ = 2.2x10⁻³ - X

1.04858x10²³X + 5.24288x10²⁴ X² + 9.8304x10²⁵ X³ + 8.192x10²⁶ X⁴ + 2.56x10²⁷ X⁵ - 2.2x10⁻³ = 0

Solving for X:

X = 2.01x10⁻²⁶

As

[Cu²⁺] = X

Answer:

E) NaF and SrO

Explanation:

The ionic bonding occurs between atoms with a great difference in electronegativity. This usually happens between a metal and a non-metal.

In which pair do both compounds exhibit predominantly ionic bonding?

A) KCl and CO₂. NO. C and O are non-metals and present covalent bonding.

B) SO₂ and BaF₂. NO. S and O are non-metals and present covalent bonding.

C) F₂ and N₂O. NO. Both compounds contain non-metals and present covalent bonding.

D) N₂O₃ and Rb₂O. NO. N and O are non-metals and present covalent bonding.

E) NaF and SrO. YES. Na and Sr are metals while F and O are non-metals.

Answer:

91 millilitres

Explanation:

Recommended application = 65mg / Kg

This means 65 mg of dicyclanil per kg (1 kg of body mass).

Concentration = 50 mg / mL

How many millilitres required to treat 70kg adult?

If 65mg = 1 kg

x = 70 mg

x = 70 * 65 = 4550 mg

Concentration = Mass / Volume

50 mg/mL = 4550 / volume

volume = 4550 / 50 = 91 mL

Answer:

ΔS surrounding (entropy change of the reservoir) = -1 J/K

Explanation:

Given:

Change in heat (ΔH) = 150 joules

Temperature (T) = 150 K

Find:

ΔS surrounding (entropy change of the reservoir)

Computation:

ΔS surrounding (entropy change of the reservoir) = - ΔH / T

ΔS surrounding (entropy change of the reservoir) = - 150 / 150

ΔS surrounding (entropy change of the reservoir) = -1 J/K

Answer:

the volume of the titrant used

Explanation:

Acid-base titrations are usually depicted on special graphs referred to as titration curve. A titration curve is a graph that contains a plot of the volume of the titrant as the independent variable and the pH of the system as the dependent variable.

Hence, a titration curve is a graphical plot showing the pH of the analyte solution plotted against the volume of the titrant as the reaction is in progress. The titration curve is drawn by plotting data obtained during a titration, that is, volume of the titrant added (plotted on the x-axis) and pH of the system (plotted on the y-axis).

Answer:

310 mL

Explanation:

Step 1: Given data

Step 2: Calculate the initial volume

We have a concentrated HBr solution and we want to prepare a diluted one. We can do so using the dilution rule.

C₁ × V₁ = C₂ × V₂

V₁ = C₂ × V₂ / C₁

V₁ = 0.400 M × 5.50 L / 7.10 M

V₁ = 0.310 L = 310 mL