Which of the following characteristics was NOT included in Dmitri Mendeleev's periodic table?O distribution of elements determined by electron configurationO heavier elements placed in rows closer to the bottom of the tableO elements arranged by increasing atomic massO elements placed in columns based on chemical properties

The volume occupied at 25 °C. Remember to convert between °C and K. V2 = 3.311 L is the correct answer.

What is volume?

Volume is the measure of the amount of space occupied by an object or a substance. It is measured in three dimensions: length, width, and height. In the International System of Units (SI), it is measured in cubic meters (m3). Volume is also commonly measured in liters (L), gallons (gal), or cubic feet (ft3). Volume can also refer to the amount of a substance or object, such as the volume of a gas or the volume of a liquid.

Temperature and Volume equation

Given,

The volume at -12°C = 2.90L

Temperature, T1 = -12°C

= (-12°C + 273)

= 261K

And, Volume at 25°C = ?

(25°C + 273)K

= 298K

Now, by using this equation:-

V1/T1 = V2/T2

V2 = V1 x T2/T1

V2 = 2.90L x 298K/261K

V2 = 3.311L

Hence, The volume at  25°C will be 3.311L

To learn more about Temperature and Volume equation

https://brainly.com/question/9956672

#SPJ1

The statement that is  true about the elements;

Atom X and Atom Y are in the same row on the periodic table. Option C

We know that the periodic table has to do with an arrangement of the elements in an order that is systematic. As such, when we look at the periodic table, we are looking at a systematization of the elements in a way that it is quite easy for us to be able to identify the elements.

Now we know that the mass number is the sum of the atomic number which in turn is the proton number and the number of the neutrons in the atom.

We know that the atomic number is what would tell us the group to which the element has been found to belong and in this case we can see that element X is just right to element Y in the periodic table.

Learn more about periodic table:https://brainly.com/question/11155928

#SPJ1

Rank the relative viscosity and vapor pressure of the substances Paraffin, hexadecane, octane, 2,2,4-trimethylpentane,methane.

In addition to being a fuel or fuel component for diesel and tractor engines, paraffin is frequently utilized as a fuel for jet engines and rockets. These are some typical applications for paraffin: Paraffin wax, a white or colorless soft solid that is used as a lubricant, in candles, crayons, electrical insulation, and petroleum jelly, is a complex mixture of hydrocarbons that is especially obtained from distillates of wood, coal, petroleum, or shale oil. It is primarily used in coating and sealing, candles, rubber compounding, pharmaceuticals, and cosmetics. Consuming excessive amounts of paraffin might result in intestinal blockage, which can bring on symptoms including nausea, vomiting, and constipation. An individual with a dye allergy could get tongue swelling if the paraffin contains that dye.

Learn more about Paraffin here:

https://brainly.com/question/14682311

#SPJ4

The volume of the object is 1.5ml.

This refers to the space occupied within the boundaries of an object in three-dimensional space. It is also called the capacity of the object.

In the question:

ρ = 400 g/mL

m = 600 mg

v = ?

Formular for calculating density ρ:

ρ = m/v

Where,

ρ= Density of the object

m= Mass of the object

v = volume of the object

Were are given the values of density and mass in the question. We are to calculate the volume.

Makinig v subject of the formular we have:

v = m/ρ

v =  600 mg

      400 g/mL

v = 1.5ml

Learn more about volume on

https://brainly.com/question/23937702

#SPJ1

AlCl 3 is Lewis base,PH3 is Lewis base,BH3 is Lewis acid ,BF3 is Lewis acid.

The crucial step is AlCl 3 accepting a chloride ion lone-pair to generate AlCl 4 and the highly acidic, or electrophilic, carbonium ion. Lewis bases:  RCl +AlCl 3 → R + + AlCl 4−, etc. [ edit] The highest occupied molecular orbital (HOMO) of an atomic or molecular species that is strongly localised is known as a Lewis base.Lewis acid borane (BH3) has three hydrogen atoms and one boron atom in its molecule. The Lewis structure of borane features a single connection connecting each hydrogen atom to boron (BH3). Only three bonds surround the boron atom, and there are no lone pairs on the atom itself. We will learn how to draw the BH3 Lewis structure in this lesson.Only six electrons orbit the boron atom, according the Lewis structure of BF3. As a result, the boron atom's octal is incomplete. Borane BF3 is therefore regarded as a Lewis acid.A highly poisonous gaseous chemical is phosphorus. Three sigma bonds and one lone pair are present around the phosphorus atom in the Lewis structure of phosphine (PH3). Hydrogen and phosphorous atoms have no charges. The trigonal pyramidal shape of PH3 is a fundamental shape.

learn more about Lewis acid Refer:brainly.com/question/15570523

#SPJ4

Ozone decomposes to oxygen according to the equation 2O₃(g)⟶3O₂(g). Create the equation that ties the rate expressions for this reaction to the creation of oxygen and the disappearance of O₃.

Given that there are more reactants in a given volume of space, increasing the concentration of reactants improves the likelihood that they will collide in the proper direction. As a result, the reactions rate would increase if the reactants were concentrated more. more often with each other. As a result, the reaction progresses more quickly as the temperature rises. Since the molecules will have less kinetic energy, travel more slowly, and collide less frequently as a result of a lower temperature, the rate of reaction will also be reduced.

Learn more about reaction here-

https://brainly.com/question/13516179

#SPJ4

Based o the percentage masses of the elements, the empirical formula of epinephrine is C₉H₁₃O₃N.

The empirical formula of epinephrine is calculated below as follow:

Mole ratio of the elements are determined:

Carbon = 59% / 12

Carbon = 0.049 moles

Hydrogen = 7.1% / 1

Hydrogen = 0.07 moles

Oxygen = 26.2% / 16

Oxygen = 0.016

Nitrogen = 7.7% / 14

Nitrogen = 0.0055

The simplest whole-number ratio will be:

C = 0.049/0.0055

C = 9

Hydrogen = 0.07/0.0055

H = 13

Oxygen = 0.016/0.0055

Oxygen = 3

Nitrogen = 0.0055/0.0055

Nitrogen = 1

The empirical formula = C₉H₁₃O₃N

Learn more about empirical formula at: https://brainly.com/question/1603500

#SPJ1

Atomic number of Technetium is 43, Mass number is 99  and symbol is Tc ,hence symbol of isotope is  99 m43 Tc

General representation of atom is AZ X

Where ,  A is mass number , Z is atomic number and X is symbol of element. Atomic number of Technetium is 43, Mass number is 99  and symbol is Tc ,hence symbol of isotope is  99 m43 Tc ,Where m stands for meta stable.

A chemical element with the atomic number 43 and the symbol Tc is known as technetium. It is the lightest element whose radioactive isotopes are all present. Technetium is a synthetic element that is created in abundance. The most prevalent source of naturally occurring technetium is uranium and thorium ores, where it spontaneously fissions as a byproduct, while molybdenum ores produce it as a byproduct of neutron capture. This crystalline, silvery-gray transition metal in group 7 of the periodic table is sandwiched between rhenium and manganese, and its chemical characteristics fall somewhere in the middle of the two nearby elements. Only in traces, 99Tc is the most prevalent naturally occurring isotope.

Learn more about Technetium here:

https://brainly.com/question/16184700

#SPJ4

The reaction is given :    ²³⁴Pa₉₁  ----->   X  +   ⁰e₋₁ , the equation is balanced and the nucleus represented by X is ²³⁴U₉₂.

The balanced reaction is given as :

²³⁴Pa₉₁  ----->   X  +   ⁰e₋₁

This reaction is the balanced reaction and X is represented the nucleus and is given as :  ²³⁴U₉₂.

The given reaction is the nuclear reaction. the nuclear reaction is the reaction in which the nuclides are produced by the collision between the two atoms nuclei. the nuclear reaction are of the two types the nuclear fission and the nuclear fusion reaction. the nuclear fission is the splitting of the large nuclei in to the smaller ones.

To learn more about nuclear fission here

https://brainly.com/question/13820743

#SPJ4

1 A + two C and d → C + S t where rate=k[A][B][rate] 2. An experiment with [A]o = 0.000847 T s as well as [B]o = 1.11 M was run for a predefined number of seconds. The slope of a ln[A] vs. grown steadily was -9.43. rate of reaction is 3.62m/s

Slope and slant both refer to an incline up from a reference surface or line that is generally straight. The ground slopes (either upward or straight down) sharply here. To slope is to slope vertically in an ambiguous path A line's steepness could be determined by looking at its slope. Altitude is calculated mathematically as "rise over run."

Learn more about reaction here:

https://brainly.com/question/13440548

#SPJ4

Both I and II are true statements. The melting point of a solid is the temperature at which solid changes from a solid to a liquid.

Molecular solids are composed of molecules held together by weak intermolecular forces, such as dipole-dipole interactions, hydrogen bonds, and London forces.

These types of bonds are weaker than the ionic bonds that are present in ionic solids, which is why molecular solids have lower melting points than ionic solids.

In addition, the shape of the molecule will influence its melting point or boiling point. For example, molecules with a higher surface area will have a higher boiling point than molecules with a lower surface area.

This is due to the increased surface area leading to increased intermolecular forces and a higher boiling point.

To know more about the London dispersion force, click here:

https://brainly.com/question/1454795

#SPJ4

Both I and II are true statements. The melting point of a solid is the temperature at which solid changes from a solid to a liquid.

Molecular solids are composed of molecules held together by weak intermolecular forces, such as dipole-dipole interactions, hydrogen bonds, and London forces.

These types of bonds are weaker than the ionic bonds that are present in ionic solids, which is why molecular solids have lower melting points than ionic solids.

In addition, the shape of the molecule will influence its melting point or boiling point. For example, molecules with a higher surface area will have a higher boiling point than molecules with a lower surface area.

This is due to the increased surface area leading to increased intermolecular forces and a higher boiling point.

To learn more about London dispersion force visit:

https://brainly.com/question/20514601

#SPJ4

Answer:

2 g of the parent isotope is left.

Explanation:

The half-life of a radioactive isotope is the amount of time it takes for half of the isotope to decay. In this case, the half-life of the isotope is 8 days, which means that after 8 days, half of the isotope will have decayed.

To determine how much of the parent isotope is left after 40 days, we need to calculate how many half-lives have passed in that time. Since the half-life is 8 days, and 40 days have passed, we can divide 40 by 8 to find the number of half-lives that have occurred: 40 / 8 = 5

Since 5 half-lives have passed, we can calculate the amount of the parent isotope that is left by multiplying the original amount of the isotope by 1/2 to the power of the number of half-lives that have passed: 64 * (1/2)^5 = 64 * (1/32) = 2 g

Therefore, after 40 days, only 2 g of the parent isotope is left.

Answer:CH

3

​

CH

2

​

CH

2

​

C≡C−CH

3

​

Explanation:

To solve such we need to have concept of spontaneity. The terms "feasible" and "likely" are both used to describe spontaneous processes. Therefore, second reaction will occur spontaneously.

The word "spontaneity" refers to a process's viability. A process is referred to as spontaneous if it can occur either on its own or as the result of some initiation under a certain set of circumstances. In other terms, a spontaneous process is one that may happen on its own, without any outside intervention.

For a reaction to be spontaneous, the value for ΔG should be negative and for that cell potential should be positive value according to following equation.

ΔG=-nFE

ΔG = Gibbs's free energy

E= cell potential

F= 96500

n= number of electron

Therefore, second reaction will occur spontaneously.

To learn more about spontaneity, here:

https://brainly.com/question/5372689

#SPJ1

The Nernst equation and the link between the standard cell potential and free energy can be used to determine the equilibrium constant of the redox process in an electrochemical cell.

The ratio of the product concentration to the reactant concentration is the equilibrium constant. a fixed value for a certain reaction at a specific temperature. The letter "c" denotes the expression of the equilibrium constant in terms of concentrations.

The standard cell potential, temperature, reaction quotient, and the cell potential of an electrochemical cell are all related by the Nernst equation. The Nernst equation can be used to determine the cell potentials of electrochemical cells even under unusual circumstances.

To know more about Equilibrium Constant :

brainly.com/question/15118952

#SPJ4

Answer:

3Ca(OH)2 = 3(40+2(16+1))

= 222

448.2 ÷ 222 = 2.02mol

6NaOH = 6(23+16+1)

= 240

240 × 2.02mol = 484.5 g

According to the given statement 5 °C temperature change is observed.

The variation in heat is measured by a calorimeter. A metal water container placed above an exhaust gases serves as the basic component of a calorimeter. The amount of water's temperature change is measured using a thermometer.

The calorimeter burns a 1.221g sample.

The calorimeter contains 1.240 kg of water .

The calorimeter has a heat capacity of 1365 j/°C.

∆H rxn = -3227 kj/mol of benzoic acid

Given: 1.221 g is the mass of the benzoic acid

Benzoic acid's molecular weight is 122.12 g/mol.

122.12 g benzoic acid = 1 mol

1.221 g benzoic acid =1.221/122.12= 0.0099 moles

When burned, 1 mol of benzoic acid releases 3227 kj of energy.

Burning 0.0099 moles of benzoic acid produces energy

= 3227kj×(0.0099mols)/1 mol =32.2647 kj =32264.7 j

The calorimeter absorbed thermal energy

= 1365 j/C ×T

Water absorbs heat

= m× C× T

= 1240 g( 4.18 j/gC ) ×T

= 5183.2j/C×T

the total amount of heat absorbed

= 1365T + 5183.2T

=6548.2T

6548.2T=32264.7

T= 4.92 deg.C

T= 5 °C

The result is a 5 °C temperature change.

To know more about Calorimeter visit:

https://brainly.com/question/4802333

#SPJ1

If the reaction is exothermic as described, a rise in temperature will thus trigger the opposite reaction, which will result in a decrease in the amount of the products and an increase in the number of reactants. The reverse outcome will occur if the temperature is lowered.

B. The concentration of the products increases.

A reaction is defined as exothermic if the overall standard enthalpy change (H) is negative. Exothermic processes typically produce heat. Exergonic reaction, which the IUPAC defines as "... a reaction for which the overall standard Gibbs energy change G is negative," is frequently mistaken with the phrase.

Because "H" contributes significantly to "G," a strongly exothermic process is typically also exergonic. Exothermic and exergonic chemical reactions make up the majority of the impressive demonstrations in schools.

learn more about exothermic reaction here:

https://brainly.com/question/23506001

#SPJ4

Answer: True. Voltaic cells, also known as galvanic cells, are able to provide energy in the form of electricity because the potentials of their redox reactions permit electrons to flow spontaneously. Redox reactions involve the transfer of electrons from one species to another, and the flow of electrons through a circuit can be used to do work, such as powering an electric motor or a lightbulb. The potential difference between the two half-cells in a voltaic cell is called the cell potential, and it determines the direction and magnitude of the flow of electrons.

Explanation:

Acids

There are various definitions for an acid. The simplest description of an acid is a chemical molecule with one or more hydrogen atoms that, when dissolved in water, gives forth hydronium ions (H3O+).

Because acids are molecular, they do not assume the expanded three-dimensional structures of ionic substances like NaCl and remain single molecules in their pure form. However, when these molecules are dissolved in water, a positively charged anion and a hydronium ion are produced as a result of the chemical connection between the hydrogen atom and the remainder of the molecule breaking. An equation involving chemicals can represent this:

HCl+H2O→H3O++Cl−

In an inorganic acid's formula, the H of the acid is written first. After the acid dissolves, the anion is all that is left of the acid (apart from the H). Although a significant class of chemicals, organic acids are not covered in this article.

Acid Names

Since all acids contain hydrogen, an acid's name is determined by the anion that it is associated with. These anions come in monatomic and polyatomic forms.

Binary acid names (in aqueous form)

An acid that contains hydrogen and another element is referred to as a binary acid. The majority of binary acids have a halogen in them. The prefix hydro- is used to start an acid name, which is then followed by the base name of the anion and the suffix -ic.

Oxyacids name

An oxyacid is an acid made up of three elements: hydrogen, oxygen, and another one. Typically, the third element is a nonmetal.

a) Oxyanions with the -ite end.

The anion's root is followed by the suffix -ous to form the name of the acid. No prefix is present.

b)Oxyanions that end in -ate.

The anion's root and the suffix -ic are used to identify the acid. No prefix is present.

In conclusion

Acids are molecular substances that discharge hydrogen ions.

The two elements hydrogen and the other make up a binary acid.

Hydrogen, oxygen, and another element are all present in oxyacids.

The anion that is bound to the hydrogen provides the basis for the acid's name.

To know more about acid nomenclature

https://brainly.com/question/25148363

Identify each statement as True or False a) True b) True c) True d) False  Not just pure water, but all aqueous solutions are subject to the equilibrium constant Kw.

In pure water, the concentrations of the hydronium and hydroxide ions are identical, making the solution neutral. Based on how much they ionise in water, acids and bases are categorised as strong or weak. - Salt and water are typically produced when acids and bases react. When the amount of hydrogen ions and hydroxide ions are equilibrium in moles, neutralisation takes place. The weak acid neutralises the base when it is introduced to the mixture.

To learn more about solution, click here.

https://brainly.com/question/1616939

#SPJ4

An organism with the genotype of AaXx can produce gametes containing  either AX, Ax, aX, ax  if the two genes are unlinked .

An organism's genotype is the complete set of its genetic material. [1] Genotype can also be used to refer to the alleles or variants that an individual has at a particular gene or locus. The number of alleles an individual can have for a particular gene depends on the number of copies of each chromosome (also called polyploidy) found in that species. Diploid species like humans have two complete sets of chromosomes. This means that each individual has her two alleles for a particular gene. If both alleles are the same, the genotype is said to be homozygous. If the alleles are different, the genotype is called heterozygous.

Genotypes contribute to the phenotype, observable traits and characteristics of an individual or organism. The extent to which genotype influences phenotype depends on the trait.

Learn more about genotype here : https://brainly.com/question/22117

#SPJ4

Label for each of the compounds given in the question are: 1) Isomer, 2) Isomer, 3) Resonance Structure, 4) Isomer 5) Neither.

A group of two or more Lewis structures known as resonance structures describe the electronic bonding of a single polyatomic species, including fractional bonds and fractional charges. The number of electrons in resonance structures should be constant; do not add or subtract any electrons. (Count the electrons to determine their number). Every resonance structure complies with the standards for writing Lewis Structures. Structure hybridization must be constant. By cyclically moving elections, it is possible to depict the two resonance configurations of the benzene ring. Multiple resonance structures can be found in conjugated double bonds.

To learn more about resonance structures click here

brainly.com/question/29547999

#SPJ4

D ) The answer that best depicts the diagnostic cleavage that is typical of the mica group of minerals which include muscovite and bietet is a single, planar cleavage .

Cleavage is the splitting of minerals along natural planes of weakness

When there is only one cleavage plane, a single, planar cleavage known as the basal or pinacoidal cleavage takes place. cleaved at the base of the graphite. Mica (like muscovite or biotite) has basal cleavage, that's why mica can be peeled into thin sheets.

So single planar cleavage is answer of this question.

To know more about cleavage click below link:

https://brainly.com/question/11933501#

#SPJ4