Which of the following bonds would be the most polar without being considered ionic?a. F-Hb. Na-Fc. S-Hd. Cl-He. O-H

Explanation:

1. Carlos is using unknown chemicals, which is breaking the rules that state: "Treat every chemical hazardous" and "No chemical should be taken without proper authorisation".

2. Jane doesn't know where the eye-wash station is, so she is breaking Rule #1: "Know locations of laboratory safety showers, eyewash stations, and fire extinguishers. The safety equipment may be located in the hallway near the laboratory entrance."

3. Harry has broken the rule that says that "No horseplay will be tolerated." He has turned on the hot plate without instruction.

4. Brent is eating in class. Eating in laboratories where hazardous materials are present is prohibited, yet he still eats a bagel. He is at risk of food poisoning.

5. Sniffing or tasting chemicals can be dangerous or even deadly as the vapours or fumes can contain traces of unknown toxins.

6. She should be more careful, and according to lab safety rules, she should put her bag in the designated areas and work independently unless she is told by her instructor to do otherwise.

7.  Rachel should dress for the lab. If she doesn't and her clothes react badly to the chemicals, it would pose serious health problems.

8. I don't know about this question.

9. Water can act as a reactant, so the chemical in the sink may damage the lab or outside pipes if corrosive. Experiments should be left in the lab unless told to do otherwise by the instructor.

10. Clean up at the end of lab. In this situation, Diana and Mike didn't clean up thoroughly, which can damage their bench top.

11. Jake is performing experiments without permission. He may become a threat to himself if his body gets contaminated.

12. The experiments wouldn't be conducted correctly, which may contaminate the students around them or damage the lab. Heather and Jennifer might pose a threat to the lab.

13. Again, tasting or smelling lab materials are strictly prohibited. Rebecca  may harm her digestive system if she tries an unknown salt.

14. Unwanted reactions may occur, and  the result might be acidic, corrosive, contaminate the surrounding area or discolour some places.

15. Because if we do not follow procedures and rule, we may damage some tools or fellow students.

Part A The chemical equation for HNO3  showing it is acid is:-

HNO3 (aq) → H+ (aq) + NO3- (aq)

The phases are HNO3 (aq) = aqueous solution, H+ (aq) = aqueous solution and NO3- (aq) = aqueous solution.

Part B The chemical equation for HF showing it is acid is:-

HF (aq) → H+ (aq) + F- (aq)

The phases are HF (aq) = aqueous solution, H+ (aq) = aqueous solution, and F- (aq) = aqueous solution.

HNO3 (aq) is an acid according to the Arrhenius definition because the chemical substance HNO3 (nitric acid) dissociates in an aqueous solution to release hydrogen ions (H+).

HF (aq) is an acid according to the Arrhenius definition because the chemical substance HF (hydrofluoric acid) dissociates in an aqueous solution to release hydrogen ions (H+).

Learn more about Arrhenius:

https://brainly.com/question/14739712

#SPJ11

The correct option will be only the first and second choices are correct.

Polysaccharides, in general, are carbohydrates that contain a large number of monosaccharide units bonded by glycosidic bonds. Polysaccharides are the polymers in which the monomer is a sugar molecule. Polymers are large molecules made up of many smaller molecules connected together.

In this case, the smaller molecules are monosaccharides, which are combined to form polysaccharides. Polysaccharides are formed when three or more monosaccharides join together to form a chain.

The correct option is that only the first and second choices are correct.

Learn more about Polysaccharides here:

https://brainly.com/question/780562

#SPJ11

1. The balanced chemical equation shows that for every 2 molecules of octane burned, 16 molecules of carbon dioxide are produced. Therefore, the number of molecules of carbon dioxide represented by the equation is 16.

2. The balanced chemical equation shows that for every 2 molecules of octane burned, 25 molecules of oxygen are required. Therefore, the ratio of octane to oxygen is 2:25. From this, we can determine the number of moles of octane represented by the equation by dividing the given amount of oxygen by the ratio:

25 mol O2 × (2 mol C8H18 / 25 mol O2) = 2 mol C8H18

Therefore, the equation represents 2 moles of octane.

3. The simplified mole ratio of octane to carbon dioxide can be determined by dividing both sides of the equation by the coefficient of octane (2):

2C8H18(g) +25O2(g) → 16CO2(g) + 18H2O(l)

Dividing by 2, we get:

C8H18(g) + 12.5O2(g) → 8CO2(g) + 9H2O(l)

The simplified mole ratio of octane to carbon dioxide is therefore 1:8.

4. The simplified mole ratio of oxygen to octane can be determined in the same way, by dividing both sides of the equation by the coefficient of octane:

2C8H18(g) +25O2(g) → 16CO2(g) + 18H2O(l)

Dividing by 2, we get:

C8H18(g) + 12.5O2(g) → 8CO2(g) + 9H2O(l)

The simplified mole ratio of oxygen to octane is therefore 12.5:1.

Learn more about octane here https://brainly.com/question/29657423

#SPJ1

The model for the atom that was understood when Bohr made his contributions were called the option (A) Planetary Model.

Bohr's model, also known as the Planetary model, is a basic model of the atom that explains the atomic structure. The atomic nucleus is in the center of the atom, with electrons moving in circular orbits about it at different energy levels.

The model is called the planetary model because it resembles the planets in the solar system revolving around the sun. The electrons are arranged in concentric circles around the nucleus, with each circle corresponding to a specific energy level.

In summary, when Bohr made his contributions, the model for the atom that was understood was called the Planetary Model.

To know more about the planetary model:

https://brainly.com/question/30790603

#SPJ11

The melting point of a substance is the temperature at which the particles have enough kinetic energy to break free from the solid phase and enter the liquid phase.

When the melting point is reached, the solid's lattice structure is disrupted and its particles are free to move, increasing the entropy of the system.

At the molecular level, when particles in a solid gain enough energy, they vibrate more intensely and begin to break the bonds between them. This disruption leads to a decrease in entropy, as the particles move around more freely.

When the melting point is reached, this decrease in entropy is overcome by an increase in entropy due to the particles being able to move around more freely in the liquid state. The disruption of the lattice structure also results in a decrease in the intermolecular forces, and thus a decrease in surface tension.

To know more about lattice structure  click on below link:

https://brainly.com/question/2497050#

#SPJ11

The partial pressure of oxygen in the atmosphere is 0.210 atm.

Therefore, the partial pressure of oxygen in mm Hg is 0.210 atm x 760 = 158.6 mm Hg and the partial pressure of oxygen in torr is 0.210 atm x 760/101.325 = 1.55 torr.

The air in the atmosphere is composed of many different gases. The most common of these gases is nitrogen, which makes up 78% of the atmosphere.

Oxygen makes up 21% of the atmosphere, and the other gases make up 1%. The atmospheric pressure is the pressure created by the weight of the gases in the atmosphere.

The atmospheric pressure is measured in units of atmospheres (atm). The atmospheric pressure at sea level is usually around 1 atm, which is equal to 760 mm Hg and 101.325 torr.

This is the same pressure that you feel when you take a breath of air.

The partial pressure of a gas is the amount of pressure exerted by that gas alone, as opposed to the total atmospheric pressure. The partial pressure of oxygen in the atmosphere is 0.210 atm.

This means that, out of the total atmospheric pressure of 1 atm, 0.210 atm of the pressure is from oxygen.

Partial pressure is often measured in units of mm Hg or torr. To convert from atm to mm Hg, the value is multiplied by 760.

Therefore, the partial pressure of oxygen in mm Hg is 0.210 atm x 760 = 158.6 mm Hg and the partial pressure of oxygen in torr is 0.210 atm x 760/101.325 = 1.55 torr.

to know more about partial pressure refer here:

https://brainly.com/question/13199169#

#SPJ11

Isotopes are different forms of an element that have different atomic masses. The number of protons in each atom of an element will remain the same, but isotopes of an element will have different numbers of neutrons, leading to different atomic masses.

Isotopes are different forms of an element that have different numbers of neutrons in their nuclei. The number of neutrons in an atom can vary from one to several, depending on the element. Isotopes are atoms of an element that differ in the number of neutrons present in their nucleus. The atomic number of an element is determined by the number of protons present in the nucleus. However, the isotopes of the same element differ in their mass numbers. The atomic mass of an element is determined by the number of protons and neutrons present in the nucleus.

The atomic number of an atom is the sum of the number of protons in the nucleus and the number of electrons in a neutral (non-ionized) atom. Each atomic number designates a particular element, but not an isotope; the number of neutrons in an atom of a given element can vary widely. Each isotope of an element has a particular mass number, which is determined by the number of nucleons (both protons and neutrons) in the nucleus. Therefore, the isotopes of an element have different atomic masses.

Isotopes can be radioactive or stable, depending on the number of neutrons present in the nucleus. For instance, carbon-14 is a radioactive isotope of carbon, while carbon-12 is a stable isotope.

For more such questions on Isotopes , Visit:

https://brainly.com/question/14220416

#SPJ11

The electrons donated to the electron transport chain by NADH activate 4 proton pumps, while those donated by FADH2 activate 2 proton pumps. Electron transport is the process by which electrons are passed from one molecule, such as NADH or FADH2, to another molecule, such as oxygen.

The electrons donated to the electron transport chain by NADH activate 10 proton pumps, while those donated by FADH2 activate 6 proton pumps.

What is the electron transport chain?

The electron transport chain (ETC) is a chain of molecules that move electrons down a gradient from a higher energy state to a lower energy state, releasing energy along the way. In eukaryotic cells, the electron transport chain is located in the inner mitochondrial membrane. Electrons from NADH and FADH2 are passed down the chain in the electron transport chain, which eventually generates a proton gradient used to create ATP. In the electron transport chain, NADH and FADH2 donate electrons to a chain of electron carriers, which then pump protons from the mitochondrial matrix to the intermembrane space. The number of proton pumps activated by electrons donated by NADH and FADH2 differ. Electrons donated by NADH activate ten proton pumps, while electrons donated by FADH2 activate six proton pumps. The electron transport chain is responsible for the generation of the proton motive force used by ATP synthase to create ATP, which is the main source of energy for the cell.

To know more about electron transport chain, click the below link:

https://brainly.com/question/24372542

#SPJ11

1. The approximate bond angle for a molecule with an octahedral shape  is 90 degree. so, option (e) is correct.

2. The hybridization of the orbitals on carbon in C2H4 is SP2 hybridization.

The octahedral shape of molecules is defined as the shape of molecules where six atoms or ligands or groups of atoms are arranged in a systematic way around a central dogma or atom. The Octahedral Shape of Molecules contains eight faces and the band angel is 90 degree. It consists of two square pyramids back to back each square pyramid with four faces.

In sp² hybridization is defined as the hybridization where one s orbital and two p orbitals hybridize to form three sp² orbitals each of this consisting of 33% s character and 67% p character. SP2 hybridization is required whenever an atom is surrounded by three groups of electrons.

To learn more about octahedral shape

https://brainly.com/question/30160815

#SPJ4

The complete question is,

1. Give the approximate bond angle for a molecule with an octahedral shape.

a. 109.5°

b. 180°

c. 120

d. 105°

e. 90°

2. What is the hybridization of the orbitals on carbon in C2H4?

The sample with the lowest boiling point when dissolved in 1.0 liter of water is sodium chloride (NaCl). Sodium chloride is a common salt compound which, when dissolved in water, lowers the boiling point of the solution.

To calculate the boiling point, use the following equation: Boiling Point = K b x m, where Kb is the ebullioscopic constant and m is the molality of the solution.

The ebullioscopic constant for sodium chloride is 0.51 K kg mol-1 and the molality is equal to the number of moles of solute divided by the volume of the solution. Therefore, for a 1.0 liter solution, the boiling point of the solution would be 0.51 K kg mol-1 x 0.78 moles/1.0 liter = 0.398 K kg mol-1.

Learn more about boiling point: https://brainly.com/question/40140

#SPJ11

The substrate below is primary and will undergo an [tex]SN^2[/tex] reaction when treated with a strong nucleophile. The correct answer is b. primary: will.

Learn more about substitution nucleophilic bimolecular reaction: https://brainly.com/question/30631335

#SPJ11

The order of increasing reaction rate of alkyl halides with triethylamine is iodoethane, 1-bromopropane, and 2-bromopropane.

When the primary alkyl halide reacts with the triethylamine, it's faster than the secondary alkyl halide. Since triethylamine is a strong, bulky base that tends to perform nucleophilic substitution, it undergoes a reaction with both primary and secondary alkyl halides. When halides react with triethylamine, the bond between nitrogen and carbon is formed.

In this reaction, the rate of reaction will be slower with secondary alkyl halides due to steric hindrance.  Iodoethane will be more reactive than 1-bromopropane because of the higher electronegativity of iodine which makes it more prone to nucleophilic substitution. Based on the above discussion, the order of increasing rate of reaction with triethylamine is 2-bromopropane < 1-bromopropane < iodoethane.

Therefore, iodoethane is the most reactive of the three alkyl halides, 1-bromopropane is more reactive than  2-bromopropane and 2-bromopropane is the least reactive.

To know more about alkyl halides, refer here:

https://brainly.com/question/17063582#

#SPJ11

An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of NaOH.

Therefore, option b. NaOH is correct option.

An amine is an organic compound with the formula RNH2 or R2NH or R3N, where R is an alkyl or aryl group. Amines are a type of derivative of ammonia, with one or more hydrogen atoms replaced by organic substituents.

Amines are classified as primary, secondary, or tertiary depending on the number of substituents attached to the nitrogen atom. Furthermore, they are weak bases, with aqueous solutions having pH values greater than 7 because of the presence of the amino group. When amines dissolve in water, they can act as either Bronsted-Lowry bases or Lewis bases. However, most amines are insoluble in water.Water-soluble amines Amines, despite being basic compounds, are often insoluble in water, which is a polar solvent.

As a result, they may be made water-soluble by reacting with acids. For instance, when an amine is added to an aqueous solution of hydrochloric acid, the amine ionizes and dissolves in the acidic solution. Water-soluble salts, such as ammonium chloride, are formed. Other acid-based techniques for making amines water-soluble include reacting them with sulfonic acids and oxoacids. Amines with low molecular weight are also soluble in water because they can form hydrogen bonds with water molecules.Solubility in water may be achieved by adding an amine to an aqueous solution of NaOH, which serves as a base, neutralizing the amine and making it soluble. Water-insoluble amines are converted to water-soluble compounds when they react with NaOH.

for such more question on amine

https://brainly.com/question/9631835

#SPJ11

Interference can be solely explained by considering the wave nature of light. Therefore, option C is correct.

Interference is a phenomenon that occurs when two or more waves interact with each other. It can be observed in various contexts, including light waves. When two light waves meet, they can either reinforce each other or cancel each other out , depending on their relative phases.

Reflection and refraction can be explained by considering both the particle and wave nature of light. Reflection occurs when light waves bounce off a surface, while refraction refers to the bending of light as it passes from one medium to another.

To learn more about the Interference, follow the link:

https://brainly.com/question/31857527

#SPJ12

Answer:

The balanced chemical equation for the reaction is:

C + 2H2 → CH4

From the equation, we can see that 1 mole of carbon reacts with 2 moles of hydrogen to produce 1 mole of methane. Therefore, to produce 7.8 moles of methane, we would need:

1 mole of carbon = 1 mole of CH4 / 2 moles of H2 = 1/2 mole of CH4

7.8 moles of CH4 = 7.8 × (1/2) moles of C = 3.9 moles of C

Now, we can use the molar mass of carbon to convert moles to grams:

Atomic mass of carbon (C) = 12.01 g/mol

3.9 moles of C × 12.01 g/mol = 46.8 g of C

Therefore, we need 46.8 grams of carbon to produce 7.8 moles of methane (CH4). Rounded to the nearest tenth, the answer is 46.8 grams.

Structural formula: Definition: A structural formula is a molecular representation that depicts the relationship between atoms or functional groups in a chemical compound. It's also known as a chemical formula or molecular formula.

Structural formulas provide a more detailed view of the molecular structure than empirical formulas, which only show the simplest ratio of atoms in a compound.

The structural formula also shows the spatial arrangement of atoms and groups in a compound.

There are two types of structural formulas: condensed structural formulas and Lewis structures.

Condensed structural formulas provide a concise representation of the molecular structure by eliminating most of the bonds and functional groups present in a compound.

The Lewis structure, on the other hand, shows the bonding pairs and lone pairs of electrons present in a molecule.

Structural formulas are critical in chemical analysis, particularly in organic chemistry, where they aid in the identification and characterization of chemical compounds.

These formulas help to explain the chemical properties and behavior of compounds, making them useful in drug development, food production, and other industries.

For similar question on structural formula.

https://brainly.com/question/26388921

#SPJ11

By supplying more energy to counteract intermolecular interactions and increasing contact between solvent and solute, raising temperature, agitation, surface area, or lowering particle size can enhance solubility.

A substance's solubility refers to its capacity to dissolve in a solvent. Intermolecular forces between the solute particles are broken during the dissolving process, and new connections with the solvent molecules are created. Solubility can be raised by adding extra energy to break through these intermolecular connections. Although agitation and expanding surface area improve the contact between the solvent and solute, rising temperature releases more thermal energy to break the intermolecular interactions. By increasing surface area per unit volume, particle size reduction increases interaction with the solvent. Moreover, by giving the solute additional solvation sites, more solvents or surfactants can be added to increase solubility.

learn more about solubility here:

https://brainly.com/question/29857840

#SPJ4

D. Able to answer for one's conduct and obligations

The amygdala is a pair of almond-shaped structures located in the brain's temporal lobes. It is part of the limbic system, which is involved in the processing of emotions and memory. The amygdala is involved in the formation of memories associated with emotional events, as well as the reaction to those memories.

The amygdala also plays a role in the regulation of the body's fight-or-flight response, which is the autonomic nervous system's response to danger or perceived danger. It is thought to be involved in the formation of fears and phobias, as well as the development of aggressive behaviors. In addition, the amygdala is believed to be involved in the processing of social cues, such as facial expressions and body language.

Learn more about the amygdala here:

https://brainly.com/question/24171355

#SPJ1

1.  0. 0728 mole to Silicon is equals to 2.044 gram.

2. 5. 5mol of H2O is equals to 99.08 gram.

3. 0. 0728 of Ca(H2PO4)2 is equals to 17.038 gram.

The Moles can be converted to mass in grams by multiplying the molecular weight by the number of moles for the substance. The molecular weight is defined as the number of grams per mole for the substance and gives the conversion factor for moles to grams for that particular substance.

The molecular weight is defined as the mass of a given molecule: it is measured in grams per mole. According to Dalton's different molecules of the same compound may have different molecular masses because they contain different isotopes of an element.  

1. 0.0728 mole of silicon.

  The molecular weight of silicon is 28.09 g/mole.

 =  0.0728 mole * 28.09 g/mole

 = 2.044 gram.

2.  5. 5mol of H2O

    The molecular weight of water is 18.01528 g/mole.

   =  5. 5mole * 18.01528 g/mole

   = 99.08 gram

3.  0. 0728 of Ca(H2PO4)2

    Molecular weight of  Ca(H2PO4)2 is 234.05 g/mole.

    = 0. 0728mole * 234.05 g/mole

    = 17.038 gram

To learn more about moles

https://brainly.com/question/13314627

#SPJ4

The stereocenter-containing molecule is:

1,2-dimethylcyclohexane (both carbons at position 1 and 2 are stereocenters as they have four distinct substituents connected to them)

(both carbons at position 1 and 2 are stereocenters as they have four different substituents attached to them)

Stereocenters are absent from the other compounds that were listed. Because the double bond does not include any substituents that are distinct from one another, the alkene with H wedges and the CH3 dash does not have stereocenters. As all of the carbons in cyclohexane are symmetric and do not have four separate substituents connected to them, the cyclohexane with wedge-dash methyl likewise lacks stereocenters., the only molecule in the list that contains stereocenters is 1,2-dimethylcyclohexane.

learn more about stereocenter-containing here:

https://brainly.com/question/23096013

#SPJ4

The statement "the percent ionization of a weak acid in water increases as the concentration of acid decreases" is CORRECT.

It happens because of Le Chatelier's principle which states that a system at equilibrium will respond to any external changes to oppose the changes and re-establish the equilibrium. A weak acid in water is in equilibrium with its ions as follows:

  HA (aq) + H2O (l) ⇌ H3O+ (aq) + A- (aq)

Where HA is the weak acid and A- is its conjugate base.

The extent of ionization or dissociation of the weak acid is measured by its degree of ionization which is expressed as a percentage. It can be calculated as:

Degree of ionization = (amount of HA ionized / initial concentration of HA) × 100

As per the statement, if the concentration of the weak acid is decreased, the system is no longer at equilibrium as the amount of HA will decrease. According to Le Chatelier's principle, the system will shift towards the side with more HA molecules to restore equilibrium. This will result in more dissociation or ionization of HA to form H3O+ and A-. Hence, the degree of ionization or percent ionization of the weak acid will increase with a decrease in the concentration of the acid.

Learn more about Le Chatelier's principle at https://brainly.com/question/2943338

#SPJ11

When Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.The correct answer is c.

The molar solubility is the quantity of a solute (in moles) that can be dissolved per liter of solution (in liters) at equilibrium. It is a measure of the solubility of the solute in the solvent.

Solubility is a measure of a compound's ability to dissolve in a particular solvent at a particular temperature and pressure.According to the common ion effect, the presence of a common ion decreases the solubility of a substance in solution.

Because Na2CrO4 and Ag2CrO4 are both soluble in water, they will dissociate into their constituent ions when dissolved in water according to the following reactions:Na2CrO4 → 2Na+ + CrO42-Ag2CrO4 → 2Ag+ + CrO42-When Ag2CrO4 dissolves in a Na2CrO4 solution, however, the addition of the common chromate ion, CrO42-, will push the above equilibrium to the left, resulting in a decrease in the amount of Ag2CrO4 that dissolves.

As a result, when Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.

Learn more about molar solubility here:

brainly.com/question/28170449

#SPJ11

According to the following reaction, 26.1 grams of iodine will react with an excess of hydrogen gas to form 27.4 grams of hydrogen iodide:

2HI(g) + I2(s) → 2H2(g) + 2I(s)

To calculate the number of grams of hydrogen iodide formed, use the following equation:

moles of I2 = 26.1g / 126.90g/mol = 0.205 mol I2

Since there is an excess of hydrogen gas, the number of moles of the hydrogen gas used is equal to the number of moles of I2, which is 0.205 mol.

Number of moles of hydrogen iodide formed = 2 x 0.205 = 0.41 mol

Therefore, the number of grams of hydrogen iodide formed = 0.41 mol x 127.90g/mol = 52.6g

Therefore, 52.6g of hydrogen iodide is formed when 26.1g of iodine reacts with an excess of hydrogen gas.

to know more about chemical reactions refer here:

https://brainly.com/question/29762834#

#SPJ11

The balanced chemical equation for the decomposition of solid Mercury (II) oxide (HgO) into liquid Mercury and gaseous Dioxygen is:

[tex]HgO (s) \rightarrow Hg (l) + O_2 (g)[/tex]

Mercury (II) oxide, HgO, is a stable compound that may be decomposed by heating it to generate mercury metal and oxygen gas.

This reaction may be classified as a thermic decomposition reaction because it is initiated by heat. The equation is balanced as there is one atom of mercury on the left-hand side and one on the right-hand side.

Similarly, there are two atoms of oxygen on the left-hand side and two on the right-hand side. The physical state of HgO is solid, whereas the physical state of Hg and [tex]O_2[/tex] is liquid and gaseous, respectively.

To learn more about balanced chemical equation refer - https://brainly.com/question/14228953

#SPJ11

Titration is the best investigation to identify an unknown liquid as acidic, basic, or neutral by measuring its pH level.

A student finds an unlabeled bottle of liquid under his kitchen sink. Titration is the investigation that would best help him identify the unknown liquid as acidic, basic, or neutral.

Titration is the chemical method used to find the amount of acid or base in a given substance. This method is a laboratory technique used to measure the concentration of a known solution (the titrant) with a solution of an unknown concentration (the analyte).

The unknown solution is slowly added to the known solution until it reacts completely, allowing us to calculate the concentration of the unknown solution. Titration may be used to identify an unknown solution as acidic, neutral, or basic by determining its pH level. It's a highly precise technique that's often used in analytical chemistry laboratories to measure the concentration of chemicals.

Learn more about liquid: https://brainly.com/question/1313076

#SPJ11

The molarity of the solution is 1.0 m

The first step is to convert the mass of KCl to moles:

Number of moles of KCl = 74.5 g / 74.5 g/mol = 1.0 mol

Next, we need to calculate the mass of water in kilograms:

Mass of water = 1000 mL x 1 L/1000 mL x 1 kg/L = 1 kg

Now we can calculate the molality of the solution:

Molality = moles of solute / mass of solvent (in kg)

Molality = 1.0 mol / 1 kg = 1.0 m

Therefore, the molality of the solution is 1.0 m.

To know more about molarity click here:

brainly.com/question/8732513

#SPJ4

Absolute dating:

Zircon: A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen.

Meteorites: Help to determine the age of the universe because it is assumed they were around the same time as the Earth was formed

Compression melting: Was likely formed by tectonic and volcanic events

Relative dating: When scientist are simply looking for a logical sequence of events

An igneous intrusion: A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen

Unconformity: When layers are missing from one area to another because of erosion of exposed parts that occurred because of an earthquake or other geological event.

Index fossils: If a fossil is determined to be a certain age, the layer it was found in is likely of the same age.

The Grand Canyon: Was likely entirely formed by a river

Iguazu Falls in Argentina: Was likely formed by glacial forces

Yosemite Valley: The lowest layer of glaciers that lubricate and allows a glacier to move

The statement "An igneous intrusion is always younger than all the layers it cuts through" is true.

The statement "Using radiometric methods to find the approximate age of a layer or fossil" is true.

learn more about Radiometric dating: https://brainly.com/question/8831242

#SPJ1

The text format of the question goes thus:

Absolute dating

Zircon

Meteorites

Compression melting

Relative dating

An igneous intrusion

Unconformity

Index fossils

The Grand Canyon

Iguazu Falls in Argentina

Yosemite Valley

Carbon 14 dating

Radiometric dating

a. was kkely formed by glacial forces

b. is always younger than all the layers it cuts through

Using the abnormal isotopes inside specimens and using half-life calculations to learn the absolute dates.

d. If a fossil is determined to be a certain age, the layer it

was found in is likely of the same age.

e. Using radiometric methods to find the approximate age

of a layer or fossil

was likely entirely formed by a river

When layers are missing from one are to another because of erosion of exposed parts that occurred because of an earthquake or other geological event.

h was likely formed by tectonic and volcanic events

To learn absolute date of a more recent item.

J. the lowest layer of glaciers that lubricate and allows a

glacier to move k. A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen

When scientist are simply looking for a logical sequence

of events

m. Help to determine the age of the universe because it is

assumed they were around the same time as the Earth

was formed