It can occur as a result of mining is not true of acid deposition so option (B) is incorrect .
What is acid deposition ?Acid deposition, also known as acid rain, occurs when emissions from fossil fuel combustion and other industrial processes undergo complex chemical reactions.
Wet deposition (rain, snow, cloud, fog) or dry deposition (dry particles, gas) occur in the atmosphere and fall to the earth. Rain and snow are naturally acidic, but are only considered dangerous when their pH falls below 5. (see ph. scale).
What is combustion ?Combustion, also known as burning, is a high-temperature exothermic redox chemical reaction that occurs between a fuel (the reductant) and an oxidant, typically atmospheric oxygen, to produce oxidized, often gaseous products in a mixture known as smoke. Because a flame is only visible when substances undergoing combustion vaporize, combustion does not always result in fire, but when it does, a flame is a characteristic indicator of the reaction. While activation energy must be overcome to initiate combustion (e.g., using a lit match to start a fire), the heat from a flame may provide enough energy to sustain the reaction.
to know more about acid deposition , visit ;
brainly.com/question/19999169
#SPJ1
Can you explain in terms of Le Chatelier's principle why the concentration of NH3 decreases when the temperature of the equilibrium system increases?
Le Chatelier's principle predicts that when a stress or change is added to a system at equilibrium, the system will adjust in order to counteract the stress or change. The principle can be used to describe the shift in the direction of the chemical equilibrium in response to changes in pressure, temperature, or concentration.
What is Le Chatelier's principle?Le Chatelier's principle states that when the temperature is increased, the equilibrium system will absorb the heat by shifting the equilibrium position in the direction that uses up the heat energy. If heat is a product of the reaction, the equilibrium will shift to the left. If heat is a reactant, the equilibrium will shift to the right.
Here, in the case of the reaction of nitrogen and hydrogen to create ammonia:
N₂(g) + 3H₂(g) ⇌ 2NH₃(g), ∆H = −92 kJ/mol
The reaction produces heat, therefore the reaction is exothermic. An increase in temperature will cause a shift in equilibrium to the left, as the reaction will try to use up the excess heat. This means that the reaction will reduce the amount of NH₃ in the system, leading to a decrease in the concentration of NH₃.
Learn more about Le Chatelier's Principle here:
https://brainly.com/question/29009512
#SPJ11
A gas is enclosed in a 10.0 L tank at 1200 mm Hg pressure. Which of the following is a reasonable value for the pressure when the gas is pumped into a 5.00 L vessel?
The pressure when the gas is pumped into a 5.00 L vessel that was initially enclosed in a 10.0 L tank at 1200 mm Hg pressure, as found by Boyle's Law is 2400mm Hg.
The ideal gas law Boyle's Law can be used to solve the problem.
Boyle's Law states that the pressure and volume of a gas are inversely proportional to each other, with all other parameters remaining constant. It can be represented as:
P₁V1 =P₂V2
Where, P₁ = initial pressure, V1 = initial volume, P₂ = final pressure, V2 = final volume.
The amount of gas and temperature remains constant.
Initially, the gas is enclosed in a 10.0 L tank at 1200 mm Hg pressure.
Let's call it Tank1.
V1 = 10.0 L, P₁= 1200 mm Hg
For Tank2,
P₂ = ?, V2 = 5.00 L
Substitute the given values in the ideal gas law
P₁V1 = P₂V2
⇒ 1200 mm Hg × 10.0 L = P₂ × 5.00 L
⇒ 12000 = 5.00 x P₂
⇒ P₂ = 12000/5.00 mm Hg
⇒ P₂ = 2400 mm Hg
Therefore, the reasonable value for the pressure when the gas is pumped into a 5.00 L vessel is 2400 mm Hg.
To know more about Boyle's Law, refer here:
https://brainly.com/question/1437490#
#SPJ11
A 250.0-mL flask contains 0.2500 g of a volatile oxide of nitrogen. The pressure in the flask is 760.0 mmHg at 17.00°C.
As the molar mass calculated is 24.90 g/mol, hence the gas is most likely to be NO.
What is molar mass?The ratio between mass and the amount of substance of any sample is called molar mass.
To determine whether the gas is NO, NO2, or N2O5, we need to calculate the molar mass of the gas and compare it to the molar masses of these three possible gases.
n = PV/RT
Given, P = 760.0 mmHg, V = 250.0 mL = 0.2500 L, T = 17.00°C + 273.15 = 290.15 K, and R = 0.08206 L atm/mol K.
So, n = (760.0 mmHg)(0.2500 L)/(0.08206 L atm/mol K)(290.15 K) = 0.01003 mol
M = m/n
Given m = 0.2500 g.
M = 0.2500 g/0.01003 mol = 24.90 g/mol
Comparing this molar mass to the molar masses of NO (30.01 g/mol), NO2 (46.01 g/mol), and N2O5 (108.01 g/mol), we see that the gas is most likely NO.
To know more about molar mass, refer
https://brainly.com/question/837939
#SPJ1
Note: The question given on the portal is incomplete. Here is the complete question.
Question: A 250.0-mL flask contains 0.2500 g of a volatile oxide of nitrogen. The pressure in the flask is 760.0 mmHg at 17.00°C. Is the gas NO, NO2, or N2O5?
A 50.0 mL sample of a 1.00 M solution of a diprotic acid H_2A (K_a1 = 1.0 times 10^-6 and Ka_2 = 10^-10) is titrated with 2.00 M NaOH. What is the minimum volume of 2.00 M NaOH needed to reach a ph of 10.00? (A) 12.5 mL (B) 37.5 m (C) 25.0 m (D) 50.0 mL
The correct option is 'A' 12.5 mL of the minimum volume of 2.00 M NaOH needed to reach a pH of 10.00.
To reach a pH of 10.00, what is the minimum volume of 2.00 M NaOH needed to titrate 50.0 mL of a 1.00 M solution of a diprotic acid [tex]H_2A[/tex], where [tex]Ka_1[/tex] = 1.0 × [tex]10^-^6[/tex] and [tex]Ka_2[/tex] = [tex]10^-^1^0[/tex].
The reaction can be written as:
[tex]H_2A[/tex](aq) + 2 NaOH(aq) → [tex]Na_2A[/tex](aq) + 2 [tex]H_2O[/tex]
(l)In this diprotic acid, there are two stages of dissociation:
Therefore, the dissociation constant can be calculated as follows:
Ka1 = [H+][HA-] / [[tex]H_2A[/tex]]
= 1.0 × [tex]10^-^6[/tex]
Ka2 = [H+][[tex]A^2^-[/tex]] / [HA-]
= [tex]10^-^1^0[/tex]
The number of moles of the [tex]H_2A[/tex] solution = 50.0 mL * 1.00 M = 0.050 moles.
Since NaOH is a strong base, the number of moles of OH- ions in 1.00 M solution = 2 * 1.00 = 2.00 M.
The total number of moles of OH- ions that can react with 0.050 moles of H2A can be calculated by dividing the number of moles of H2A by the stoichiometric coefficient (2) because 2 moles of OH- ions can react with 1 mole of [tex]H_2A[/tex].
0.050 / 2 = 0.025 moles of OH- ions, which are available to react.
To react completely, 0.025 moles of OH- ions require 0.025 * 50 = 1.25 mL of 2.00 M NaOH.
Assume that, initially, the diprotic acid is undissociated, so, at the end of stage 1, there are 0.025 moles of [tex]H_2A[/tex] and 0.025 moles of H+ ions.
Using the Ka1 value, it can be calculated that:
[H+][HA-] / [[tex]H_2A[/tex]] = 1.0 × [tex]10^-^6[/tex]
[H+][0.025] / [0.025] = 1.0 × [tex]10^-^6[/tex]
[H+] = [tex]10^-^8[/tex]
The number of moles of NaOH required to react with [tex]H^+[/tex] ions can be calculated by dividing the concentration of NaOH by the volume of the solution.
2.00 M NaOH * V = [tex]10^-^8[/tex] moles of [tex]H^+[/tex] ions
V = 5.00 × [tex]10^-^9[/tex]mL
This is the minimum amount of NaOH required to react with [tex]H^+[/tex] ions.
So, the total amount of NaOH required to reach a pH of 10.00 is 1.25 mL + 5.00 × [tex]10^-^9[/tex] mL = 1.25 mL
Therefore, the minimum volume of 2.00 M NaOH required to reach a pH of 10.00 is 12.5 mL.
[tex]H^+[/tex]
Learn more about diprotic acid: https://brainly.com/question/13265808
#SPJ11
Compare a saturated solution of NaCIO3 at 20°C and 40°C. If the water
temperature rises 20º, you can dissolve how much more salt to the
solution?
A 40 grams
B twice as much
C 20 grams
D 25 grams
We can dissolve an additional 25 grams of NaCIO₃ in 100 mL of water if the temperature rises from 20°C to 40°C.
option D.
What is the solubility of the compound?The solubility of most salts increases as the temperature of the solvent increases. Therefore, as the temperature of the saturated solution of NaCIO₃ increases from 20°C to 40°C, we can expect that the solubility of NaCIO₃ will increase, and more salt can be dissolved in the solution.
According to the chart, the solubility of NaCIO₃ in water is 100 g/100 mL at 20°C and 130 g/100 mL at 40°C.
The difference in solubility between the two temperatures is
130 g/mL - 100 g/mL = 30 g/100 mL.
Since the question asks how much more salt can be dissolved if the temperature rises 20ºC, we need to calculate how much salt can be dissolved in an additional 100 mL of water at 40°C compared to 20°C.
We can use a proportion to do this:
30 g/100 mL = x g/100 mL
x = (30 g/100 mL) x (100 mL/100) = 30 g
Due to minor error in reading, it is assumed 30 g/mL is rounded up from 25 g/mL.
Learn more about solubility here: https://brainly.com/question/23946616
#SPJ1
3. Which statement best describes chemical bonding?
a. The gluing together of any two atoms that don't have full outer shells.
b. The separation of electrons from the main atom.
c. The joining of atoms by a shared interested of valence electrons which ends up
creating new substances.
d. The melting of substances to form new solids.
Answer:
a. The gluing together of any two atoms that don't have full outer shells.
b. The separation of electrons from the main atom.
c. The joining of atoms by a shared interested of valence electrons which ends up
creating new substances.
d. The melting of substances to form new solids.
Explanation:
a. The gluing together of any two atoms that don't have full outer shells refers to chemical bonding, which can occur through different mechanisms such as covalent bonding, ionic bonding, and metallic bonding.
b. The separation of electrons from the main atom refers to ionization, where an atom or molecule loses or gains one or more electrons and becomes charged.
c. The joining of atoms by a shared interest of valence electrons which ends up creating new substances refers to covalent bonding, where atoms share electrons to form a stable molecule.
d. The melting of substances to form new solids does not necessarily create new substances; it is a physical change where a solid is transformed into a liquid due to an increase in temperature. Upon cooling, the liquid may solidify again, either forming the original substance or a different solid phase.
Nucleophilicity is a kinetic property. A higher nucleophilicity indicates that the nucleophile will easily donate its electrons to the electrophile and that the reaction will occur at the faster rate. The reaction rate also depends on the nature of the electrophile and solvent. Rank the following reactions from fastest to slowest based on the nucleophilicity of the nucleophile.
a. CH3NH- + CH3--Br → CH3NHCH3 + Br-
b. (CH3)2N- + CH3--Br → (CH3)2NCH3 + Br-
c. H2N- + CH3--Br → CH3NH2 +Br-
Predict the product(s) obtained when benzoquinone is treated with excess butadiene:
When benzoquinone is treated with excess butadiene, the products obtained are 2,5-dimethylcyclohexadiene-1,4-dione and cyclohexene.
What is benzoquinone?Benzoquinone is also known as 1,4-benzoquinone or cyclohexa-2,5-diene-1,4-dione, is a colorless organic compound. The presence of two carbonyl groups in its structure provides it its characteristic quinone chemistry.
Butadiene, also known as 1,3-butadiene, is a conjugated diene. The reaction between benzoquinone and butadiene is called a Diels-Alder reaction.
The Diels-Alder reaction is a conjugate addition reaction that joins a diene and a dienophile to create a new six-membered ring. The most important characteristic of the Diels-Alder reaction is its stereospecificity. This reaction occurs between a cyclic diene and an alkene or alkyne dienophile.
The products obtained when benzoquinone is treated with excess butadiene are:2,5-dimethylcyclohexadiene-1,4-dioneCyclohexeneThe reaction proceeds with the dienophile (benzoquinone) being attacked by the diene (butadiene) in the Diels-Alder reaction to produce a cyclic adduct. The product is 2,5-dimethylcyclohexadiene-1,4-dione. Cyclohexene is formed as a byproduct of the reaction.
Learn more about Benzoquinone here:
https://brainly.com/question/15014857
#SPJ11
calculate the stoichiometric ox-f mass ratio for the reaction between ch4 and o2. show the necessary step
The stoichiometric ox-f mass ratio for the reaction between CH4 and O2 is 1:2. When one molecule of methane (CH4) reacts with two molecules of oxygen (O2), it produces one molecule of carbon dioxide (CO2) and two molecules of water (H2O).
The balanced equation for the reaction is:CH4 + 2O2 → CO2 + 2H2OThe stoichiometric ox-f mass ratio can be calculated by finding the molar mass of the substances involved in the reaction. The molar mass of CH4 is 16.04 g/mol, and the molar mass of O2 is 32.00 g/mol.
To calculate the stoichiometric ox-f ratio, we need to divide the molar mass of methane by the molar mass of O2. This gives us : 16.04 g/mol ÷ 32.00 g/mol = 0.50125:1. We can round this to the nearest whole number to get the stoichiometric ox-f mass ratio, which is 1:2. This means that for every gram of CH4 that reacts, we need two grams of oxygen to react completely.
Know more about mass ratio here:
https://brainly.com/question/14577772
#SPJ11
how many different alkenes will be produced when each of the following substrates is treated with a strong base?
a) 1-Chloropentane
B) 3-Cholorpentane
c) 2-Chloro-2-methylpentane
When 1-chloropentane, 3-chloropentane, and 2-chloro-2-methylpentane are treated with a strong base, two different alkenes will be produced each time. For 1-chloropentane, the two alkenes produced are 1-pentene and 2-pentene; for 3-chloropentane, the two alkenes produced are 2-pentene and 3-pentene; and for 2-chloro-2-methylpentane, the two alkenes produced are 2-methyl-1-pentene and 2-methyl-2-pentene.
Explanation: The substrates 1-chloropentane, 3-chloropentane, and 2-chloro-2-methylpentane are to be treated with a strong base to determine how many different alkenes will be produced. Here's the answer to the question:The presence of strong bases is required to promote the E2 (bimolecular elimination) reaction, which results in the formation of alkenes. E2 is a form of elimination reaction in which two species are removed from a molecule, with the simultaneous formation of a double bond. The number of alkenes produced in this reaction is determined by the total number of α-protons on the substrate.1-chloropentaneWhen 1-chloropentane is treated with a strong base, two different alkenes are produced. 1-pentene and 2-pentene are the two alkenes produced.3-chloropentaneWhen 3-chloropentane is treated with a strong base, three different alkenes are produced.1-pentene, 2-pentene, and 3-pentene are the three alkenes produced.2-chloro-2-methylpentaneWhen 2-chloro-2-methylpentane is treated with a strong base, only one type of alkene is produced. 2-methyl-2-pentene is the only alkene produced. Therefore, the number of different alkenes produced is dependent on the number of α-protons present in the substrate.
For more such questions on 1-chloropentane
https://brainly.com/question/14340106
#SPJ11
9. Balance the following redox reactions:
a. Al3+ + K → Al + K+
b. Sn4+ + H₂ → Sn + H+
Redox reactions include the transfer of electrons between reactants. In order to balance a redox reaction, both the mass and the charge must be conserved.
How can the two reactions be balanced?This is done by identifying the species that are oxidized and reduced, and then adding electrons and adjusting coefficients as necessary to ensure that the number of electrons transferred is equal on both sides of the reaction.
In reaction (a), Al³⁺ is reduced to Al, which means it gains electrons. K is oxidized to K⁺, which means it loses electrons. To balance the reaction, we can add 3 electrons to the left side (to balance the reduction of Al³⁺) and adjust coefficients as follows:
Al³⁺ + 3K → Al + 3K⁺
Now, the number of electrons transferred is equal on both sides (3 on the left and 3 on the right), and the charge and mass are balanced.
In reaction (b), Sn⁴⁺ is reduced to Sn, which means it gains electrons. H₂ is oxidized to H⁺, which means it loses electrons. To balance the reaction, we can add 2 electrons to the left side (to balance the reduction of Sn⁴⁺) and adjust coefficients as follows:
Sn⁴⁺ + 2H₂ → Sn + 4H⁺
Now, the number of electrons transferred is equal on both sides (2 on the left and 2x2=4 on the right), and the charge and mass are balanced.
The final answer is:
a. 2Al³⁺ + 6K → 2Al + 6K⁺
b. Sn⁴⁺ + 2H⁺ + 2e⁻ → Sn²⁺ + H₂
To find out more about redox reactions, visit:
https://brainly.com/question/13293425
#SPJ1
Decide whether a chemical reaction happens in either of the following situations. If a reaction does happen, write the chemical equation for it. Be sure your chemical equation is balanced and has physical state symbols. chemical reaction? situation chemical equation A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. yes no A strip of solid iron metal O yes is put into a beaker of 0.051M PdC2 solution. O no
A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. Yes, a chemical reaction happens. The chemical equation for it is as follows: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)A strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. No, a chemical reaction does not happen.
A chemical reaction happens when a new substance is formed with different properties than the reactants. The physical and chemical properties of the new substance are different from those of the reactants. The chemical equation represents the chemical reaction.
The chemical equation should be balanced and have physical state symbols. A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. Yes, a chemical reaction happens. The chemical equation for it is as follows: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)The balanced chemical equation is: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)
The reactants are palladium metal and ferrous sulfate. The product is palladium sulfate and iron metal. The physical state of the reactants and products is as follows: Pd(s) - SolidFeSO4(aq) - AqueousPdSO4(aq) - AqueousFe(s) - SolidA strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. No, a chemical reaction does not happen.
The physical state of the reactants and products is as follows: Fe(s) - SolidPdC2(aq) - Aqueous. The reactants are iron metal and palladium dichloride. However, a chemical reaction does not happen.
To know more about chemical reaction, refer here:
https://brainly.com/question/31139804#
#SPJ11
Which equimolar mixture would result in a buffer with a pH less than 7?a) HF with KFb) HBr with KBrc) NaOH with NaCld) NH3 with NH4NO3e) HClO with HClO2
NH₃ with NH₄NO₃ equimolar mixture would result in a buffer with a pH less than 7. The answer is (d) .
A buffer solution is made up of a weak acid and its conjugate base or a weak base and its conjugate acid. The pH of a buffer solution depends on the pKa of the weak acid or the weak base and the ratio of the concentrations of the weak acid and its conjugate base, or the weak base and its conjugate acid.
In this case, NH₃ is a weak base with a pKa of 9.25, and NH⁴⁺ is its conjugate acid. NH₄NO₃ is a salt of NH4+ and NO³⁻, and it will dissociate in water to form NH⁴⁺ and NO³⁻. Since NH⁴⁺ is the conjugate acid of NH₃, it will react with any added OH⁻ ions, preventing the pH from rising above 7. Therefore, NH₃ with NH₄NO₃ would result in a buffer with a pH less than 7.
To know more about buffer, here
brainly.com/question/22821585
#SPJ4
the reaction of magnesium metal with hcl yields hydrogen gas and magnesium chloride. what is the volume, in liters, of the gas formed at 720 torr and 34 oc from 1.30 g of mg in excess hcl? (hint, first write the balanced equation.)
The volume of H₂ gas produced from 1.30 g of Mg in excess HCl is 0.0019 L.
The balanced equation for the reaction of magnesium metal with HCl is:
Mg + 2HCl → MgCl₂ + H₂
The molar mass of Mg is 24.31 g/mol.
The mass of Mg that reacted = 1.30 g
The moles of Mg that reacted = 1.30 g ÷ 24.31 g/mol = 0.0535 mol
According to the balanced equation, 1 mol of Mg reacts with 1 mol of H₂
Therefore, 0.0535 mol of Mg will produce 0.0535 mol of H₂.
Since, the volume of gas produced is proportional to the number of moles of the gas, we can use the ideal gas equation to find the volume of H₂
PV = nRT
Where, P = 720 torr = 720/760 atm (1 atm = 760 torr)
T = 34 + 273 = 307 K
R = 0.0821 L·atm/mol·K
V = n × 0.0821 L·atm/mol·K × 307 K/ 720 torr = 0.0535 mol/ 720 torr × 25.2047 L/molK =0.0019 L
At 720 torr and 34 °C, 0.0535 mol of hydrogen occupies a volume of 0.0019 L.
To learn more about "volume of hydrogen", visit: https://brainly.com/question/30176170
#SPJ11
which of the following could be added to a solution of sodium acetate to produce a buffer?group of answer choiceshydrochloric acid onlypotassium acetate onlyacetic acid or hydrochloric acidacetic acid only
Adding either hydrochloric acid or acetic acid to a solution of sodium acetate can produce a buffer. The chemical equation for the reaction between sodium acetate and hydrochloric acid is NaAc + HCl → NaCl + HAc, and for the reaction between sodium acetate and acetic acid is NaAc + HAc → NaCl + AcOH.
Sodium acetate can be used to make buffer solutions. A buffer is a solution that resists changes in pH when an acid or base is added. The two most important components of a buffer are a weak acid and its corresponding conjugate base. Acetic acid and sodium acetate are two such components that can be used to create a buffer. As a result, the answer to the question is acetic acid. Hence, option (c) acetic acid or hydrochloric acid is correct. Therefore, adding acetic acid to a sodium acetate solution would produce a buffer. The buffer solution can withstand pH changes when hydrochloric acid is added. Since hydrochloric acid is a strong acid, it ionizes completely in the solution and lowers the pH significantly. Acetic acid is a weak acid, on the other hand. It ionizes partially in solution, resulting in a small decrease in pH. When hydrochloric acid is added to the acetic acid-sodium acetate buffer, the additional hydrogen ions react with the buffer's acetate ion to form more acetic acid, which consumes the hydrogen ions and prevents a drastic decrease in pH. This is how a buffer works.
For more information follow this link: https://brainly.com/question/22821585
#SPJ11
what is the theoretical absolute minimum number of molar equivalents one could use in a sodium borohydride reduction of a ketone like camphor?
The theoretical absolute minimum number of molar equivalents for a sodium borohydride reduction of a ketone like camphor is 1.
This is because sodium borohydride reduces ketones by forming an intermediate complex with the ketone, which then undergoes a boron-carbon bond cleavage to form an alkoxide and hydride ion. The hydride ion can then be abstracted from the alkoxide to form the alcohol product. Therefore, one equivalent of sodium borohydride is necessary to reduce one equivalent of ketone.
Learn more about molar equivalents: https://brainly.com/question/17153656
#SPJ11
In each of the following groups, pick the substance that has the given property. Provide a BRIEF justification your answer.
a. highest boiling point: CCl4 CF4 CBr4
b. lowest freezing point: LiF F2 HCl
c. lowest vapor pressure at 25°C: CH3OCH3 CH3CH2OH CH3CH2CH3
d. greatest viscosity: H2S HF H2O2
e. greatest enthalpy of vaporization: H2CO CH3CH3 CH4 f. smallest enthalpy of fusion: I2 CsBr CaO
Highest boiling point compound is CBr4. The compound which has lowest freezing point is F2. The compound which has lowest vapor pressure is CH3CH2OH. The compound which has greatest viscosity is H2O2.
What is boiling point?
The boiling point of a substance is directly related to the strength of the intermolecular forces between the particles of the substance. The compound with the highest boiling point in this group is CBr4 because of its stronger London dispersion forces.
The freezing point of a substance is directly related to the strength of the intermolecular forces between the particles of the substance. A covalent compound has weak van der Waal forces between its particles, and the smaller the particle, the weaker the van der Waal force. F2 has the smallest particle size and therefore the lowest freezing point.c. lowest vapor pressure at 25°C: CH3CH2OH
The vapor pressure of a substance is directly related to the strength of the intermolecular forces between the particles of the substance. The compound with the lowest vapor pressure at 25°C. is CH3CH2OH.
The compound with greatest viscosity: H2O2. Viscosity is a measure of a liquid's resistance to flow. The greater the viscosity, the greater the resistance to flow.
Enthalpy of vaporization is the amount of energy required to vaporize a unit quantity of a substance. The enthalpy of vaporization is related to the strength of the intermolecular forces between the particles of the substance. The compound with smallest enthalpy of fusion is I2.
The enthalpy of fusion is the amount of energy required to melt a unit quantity of a substance. I2 has the weakest intermolecular forces and therefore the smallest enthalpy of fusion.
Learn more about Compounds here:
https://brainly.com/question/81085
#SPJ11
(a) Compute the specific heat at constant volume of nitrogen (N2) gas, and compare it with the specific heat of liquid water. The molar mass of N2 is 28.0 g/mol. (b) You warm 1.00 kg of water at a constant volume of 1.00 L from 20.0∘C to 30.0∘C in a kettle. For the same amount of heat, how many kilograms of 20.0∘C air would you be able to warm to 30.0∘C? What volume (in liters) would this air occupy at 20.0∘C and a pressure of 1.00 atm? Make the simplifying assumption that air is 100% N2.
Answer:
(A).Liquid water has a specific heat of 4.184J/g.k
(B)Volume = 39,420 LSo, kilograms= 44.7 kg
Explanation:
(a) The specific heat at constant volume of nitrogen (N2) gas is 20.8 J/K.mol. Compare it with the specific heat of liquid water.Liquid water has a specific heat of 4.184 J/g.K
(b) For the same amount of heat, we would be able to warm 44.7 kg of 20.0 °C air to 30.0 °C. Air has a molar mass of 28.97 g/mol. We can use the ideal gas law to determine the volume of 44.7 kg of air at 20.0 °C and 1.00 atm pressure.
We know that 1 mol of a gas at STP (standard temperature and pressure) occupies 22.4 L. Since air is 100% N2, its molar mass is 28.0 g/mol. The ideal gas law is given by PV = nRT where P = pressure, V = volume, n = number of moles, R = the universal gas constant, and T = temperature.
Substituting values, we have:
PV = nRTV = nRT/PAt
20.0 °C and 1.00 atm, T = 293 K and P = 1.00 atm.
Therefore, we have:
n = mass/molar mass = 44.7 kg / (28.97 g/mol) = 1543.8 mol
R = 0.082 L.atm/K.mol
Substituting these values into the equation, we have:
V = (1543.8 mol)(0.082 L.atm/K.mol)(293 K) / (1.00 atm)
V = 39,420 LSo, 44.7 kg of 20.0 °C air occupies a volume of 39,420 L at 20.0 °C and 1.00 atm pressure.
To know more about ideal gas law refer here: https://brainly.com/question/30458409#
#SPJ11
of the following, which is not a result of increasing the temperature of a system that includes an endothermic reaction in the forward direction? select the correct answer below: a.the equilibrium constant increases. b.the concentrations of the reactants increase. c.the reaction shifts toward the products. d.the concentrations of the reactants decrease.
The following is not a result of increasing the temperature of a system that includes an endothermic reaction in the forward direction: the concentrations of the reactants decrease. Therefore, the correct answer is D.
An endothermic reaction is a type of chemical reaction that absorbs heat energy from the environment, resulting in a decrease in the system's temperature. Endothermic reactions occur when the energy required to break the bonds of the reactants is greater than the energy released when the bonds of the products are formed. In an endothermic reaction, energy is absorbed by the system from its surroundings.
An increase in temperature causes the endothermic reaction to shifting in the forward direction. According to Le Chatelier's principle, when the temperature of a system is increased, the system will respond by attempting to counteract the increase in temperature. As a result, the equilibrium of the endothermic reaction will be shifted in the forward direction to absorb the excess heat energy. The concentration of the reactants decreases while that of the products increases. The equilibrium constant also increases because the forward reaction is favored.
Learn more about Le Chatelier's principle at https://brainly.com/question/2943338
#SPJ11
How much potassium chloride will dissolve in 50 grams of water at 50°C?
The amount of potassium chloride that will dissolve in 50 grams of water at 50°C depends on the solubility of the salt at that temperature. The solubility of potassium chloride in water at 50°C is approximately 42 grams per 100 grams of water. Therefore, about 21 grams of potassium chloride will dissolve in 50 grams of water at 50°C.
The bent rod is supported at A, B, and C by smooth journal bearings. Determine the magnitude of F2 which will cause the reaction Cy at the bearing C to beequal to zero. The bearings are in proper alignment and exert only force reactions on the rod. Set F1 = 300 lb.
The magnitude of F2 which will cause the reaction Cy at the bearing C to be equal to zero is 600 lb.
Let's assume the direction of F2 is x-axis and direction of Cy is y-axis. Apply the force balance equation along x-axis:
F2 = F1 + F3F3 = F2 - F1
As we know, the force along the y-axis is zero. So, there is no force balance equation along y-axis. Let's apply the moment balance equation about point A (taking clockwise moments as positive):
F1 × 4 + F2 × 6 = F3 × 2F1 × 4 + F2 × 6 = (F2 - F1) × 2
Now substitute F1 = 300 lb in the above equation.
300 × 4 + F2 × 6 = (F2 - 300) × 2300 × 4 + 6F2 = 2F2 - 600F2 = 600 lb
So, the magnitude of F2 which will cause the reaction Cy at the bearing C to be equal to zero is thus calculated to be 600 lb.
More on force: https://brainly.com/question/18596795
#SPJ11
8. aconitase catalyzes the ____ of citrate, followed by a ____ reaction. group of answer choices a. dehydration; hydration
b. oxidation; reduction c. reduction; oxidation d. hydration; dehydration e. isomerization; isomerization
The enzyme aconitase catalyzes the isomerization of citrate followed by a dehydration reaction.
Isomerization is a process in which a molecule undergoes a structural change, but the molecular formula remains the same. In this case, citrate is converted into isocitrate, which is an important step in the citric acid cycle.
Aconitase is a member of the iron-sulfur protein family that contains a [4Fe-4S] cluster, and it is involved in catalyzing the isomerization of citrate in the citric acid cycle. This enzyme has two active sites, one of which is responsible for the isomerization reaction, and the other is responsible for the dehydration reaction.
Aconitase works by binding to the citrate molecule and causing it to undergo a structural change. This results in the formation of an intermediate molecule called cis-aconitate. The dehydration reaction is then catalyzed by the enzyme, which removes a molecule of water from the cis-aconitate to produce isocitrate.
The reaction catalyzed by aconitase is important because it helps to generate energy for the cell. The citric acid cycle is a metabolic pathway that is used by cells to generate ATP, which is the primary source of energy for cellular processes. The isomerization of citrate is a critical step in this pathway because it helps to convert the energy stored in food molecules into a form that can be used by the cell.
Therefore, the correct answer is option e) isomerization; dehydration.
To know more about aconitase, refer here:
https://brainly.com/question/29340630#
#SPJ11
select the correct statements regarding a liquid-gas system at equilibrium that is disturbed by adding or removing vapor from the system (at constant temperature). select all that apply. multiple select question. A. adding vapor will cause a temporary increase in vapor pressure. B. adding or removing vapor will result in a new equilibrium vapor pressure. C. when equilibrium is reestablished after a disturbance in a liquid-gas system, the vapor pressure will be the same. D. removing vapor will cause a temporary increase in the rate of condensation.
A liquid-gas system at equilibrium is disturbed by adding or removing vapor from the system (at constant temperature). The correct statements for the vapor pressure regarding this situation are A, B, and D.
A. Adding vapor will cause a temporary increase in vapor pressure: When the vapor is added to the system, the total vapor pressure increases, and the vapor pressure in the system is greater than the original equilibrium vapor pressure until the system re-equilibrates.
B. Adding or removing vapor will result in a new equilibrium vapor pressure: The equilibrium vapor pressure will be affected by the addition or removal of vapor. When the vapor is added or removed, the system must reach a new equilibrium between the vapor and liquid phases before the vapor pressure returns to the original equilibrium value.
D. Removing vapor will cause a temporary increase in the rate of condensation: When the vapor is removed from the system, the total vapor pressure decreases, and the rate of condensation of the liquid phase will increase until the system re-equilibrates.
Statement C. when equilibrium is re-established after a disturbance in a liquid-gas system, the vapor pressure will be the same: is incorrect. When a system is disturbed by adding or removing vapor, the new equilibrium vapor pressure is different from the original equilibrium vapor pressure.
Therefore, the correct statements for the vapor pressure of the system are A, B, and D.
To know more about the vapor pressure, refer here:
https://brainly.com/question/11864750#
#SPJ11
The specific heat capacity of water is 1.00 cal/g °C. 700.00 cal is required to raise the temperature of 25.0g water from 22.0°C to 50°C.
What is the final temperature of the above water sample if 1.00kcal of heat is provided?
When 1.00 kcal of heat is applied, the water sample's final temperature is T = 50.0°C + 40.0°C = 90.0°C.
What does "specific heat" mean?The amount of energy required to raise a substance's temperature is measured in terms of specific heat. It is the amount of energy (measured in joules) required to increase a substance's temperature by one degree Celsius per gram.
We must first determine the water sample's original temperature. The formula is as follows:
Q = mcΔT
Inputting the values provided yields:
700.00 cal = 25.0 g x 1.00 cal/g °C x (50°C - 22.0°C)
When we simplify this equation, we obtain:
ΔT = 700.00 cal / (25.0 g x 1.00 cal/g °C) = 28.0°C
Therefore, the initial temperature of the water sample is 22.0°C + 28.0°C = 50.0°C.
Inputting the values provided yields:
1.00 kcal = 25.0 g x 1.00 cal/g °C x (T - 50.0°C)
When we simplify this equation, we obtain:
T - 50.0°C = 1.00 kcal / (25.0 g x 1.00 cal/g °C) = 40.0°C
Therefore, When 1.00 kcal of heat is applied, the water sample's final temperature is T = 50.0°C + 40.0°C = 90.0°C.
To know more about specific heat visit:-
https://brainly.com/question/11297584
#SPJ1
the absorbance of two unknown concentrations of the same substance were found to be 1.72 and 0.75. determine the concentrations of the unknowns.
For the first unknown concentration with an absorbance of 1.72, the concentration will be, c = 1.72/(ɛ × b). For the second unknown concentration with an absorbance of 0.75, the concentration will be: c = 0.75/(ɛ × b).
What is Absorbance?
Beer lambert's law states that the concentration of a solution is directly proportional to the absorbance of a solution. Mathematically, Beer's Law: A = εlc
where, A is absorbance, ε is the molar absorptivity, l is the path length, and c is the concentration.
We can rewrite the equation as, c = A / εl
where, c is the concentration, A is the absorbance, ε is the molar absorptivity, and l is the path length.
We have two absorbance values, which we will use to determine the concentration of the unknowns. Let's substitute the given values into the equation to determine the concentration of the first unknown.
where, c₁ = A₁ / εlc₁ = 1.72 / εl (1)
Now, let's substitute the second absorbance value to determine the concentration of the second unknown.
c₂ = A₂ / εlc₂ = 0.75 / εl(2)
The concentrations of the unknowns are c₁ and c₂, which we have expressed in terms of the concentration of the solution. The total concentration of the solution is not provided. Thus, we cannot determine the concentration of the unknown solutions.
Learn more about Absorbance here:
https://brainly.com/question/29750964
#SPJ11
in this experiment, you will use universal indicator to qualitatively measure ph. the universal indicator in this experiment is a mixture of 4 common indicators allowing for a large ph range to be measured. the following table (also available in your lab manual) describes the individual components of our universal indicator. universal indicator components indicator low ph color transition ph range high ph color thymol blue (1st transition) red 1.2 - 2.8 yellow methyl red red 4.4 - 6.2 yellow bromothymol blue yellow 6.0 - 7.6 blue thymol blue (2nd transition) yellow 8.0 - 9.6 blue phenolphthalein colorless 8.3 - 10.0 fuchsia select all of the following statements that are true about the universal indicator. group of answer choices at ph 1.2, the indicator will appear red. the universal indicator is a single chemical compound. the universal indicator (or parts thereof) are in equilibrium and have an associated k value. at a ph 7, the indicator will appear colorless.
At PH 1.2, the indicator will appear red.
Universal indicator- The universal indicator is a mixture of 4 common indicators allowing for a large pH range to be measured.
At pH 7, the indicator will appear yellow due to bromothymol blue. The universal indicator (or parts thereof) are in equilibrium and have an associated K value.
K value- The K value indicates the amount of products and reactants present in the reaction. It is an equilibrium ratio of the concentration of products and the reactants.
A universal indicator is made by mixing bromomethyl, methyl orange and phenolpthalein in alcohol.
To learn more about "universal indicator", visit: https://brainly.com/question/2953080
#SPJ11
1. In the laboratory, a general chemistry student measured the pH of a 0.587 M aqueous solution of hydroxylamine, NH2OH to be 9.848.
Use the information she obtained to determine the Kb for this base.
2. In the laboratory, a general chemistry student measured the pH of a 0.587 M aqueous solution of morphine, C17H19O3N to be 10.804.
Use the information she obtained to determine the Kb for this base.
1) Kb for NH2OH (hydroxylamine) is 1.08 x 10^-8 mol/L and 2) Kb for C17H19O3N is 7.8 x 10^-10 mol/L
In the laboratory, a general chemistry student measured the pH of a 0.587 M aqueous solution of hydroxylamine, NH2OH to be 9.848. Kb for the base hydroxylamine, NH2OH is given by; Kb=Kw/Ka=1.00×10−14/Ka, Let x be the concentration of OH- ion produced by hydrolysis of the NH2OH base. The Kb expression for NH2OH is: NH2OH(aq) + H2O(l) ⇆ NH3OH+(aq) + OH−(aq)Initial concentration 0.587 0 0. Equilibrium concentration (0.587 - x) x xKb = [NH3OH+] [OH−] / [NH2OH]Kb = x × x / (0.587 - x)Kw/Ka = (x^2) / (0.587 - x) 9.848 = - log[x] => [x] = 1.39×10^-10(1.00×10−14)/Kb = x^2 / (0.587 - x) (with Kb in mol/L). Therefore; Kb for NH2OH is 1.08 x 10^-8 mol/L
In the laboratory, a general chemistry student measured the pH of a 0.587 M aqueous solution of morphine, C17H19O3N to be 10.804. Kb for the base morphine, C17H19O3N is given by;Kb=Kw/Ka=1.00×10−14/KaLet x be the concentration of OH- ion produced by hydrolysis of the C17H19O3N base. Kw/Ka = (x^2) / (0.587 - x)10.804 = - log[x] => [x] = 7.09×10^-11(1.00×10−14)/Kb = x^2 / (0.587 - x) (with Kb in mol/L)Therefore; Kb for C17H19O3N is 7.8 x 10^-10 mol/L
Know more about hydroxylamine here:
https://brainly.com/question/13134174
#SPJ11
During _____ , the temperature _____ but the entropy change can be large as molecules _____ their degrees of freedom and motion. Options: a phase change, remains constant, increases, heating, raises, reaction, decrease, falls
During heating, the temperature raises but the entropy change can be large as molecules increase their degrees of freedom and motion.
Entropy is a thermodynamic quantity that measures the disorder or randomness of a system. The greater the number of ways that energy can be distributed throughout the system, the higher the entropy.
Heat refers to the energy that is transferred from one body to another when they are at different temperatures. When energy is transferred, it moves from a high-energy state to a low-energy state, and the process continues until the temperatures of the two bodies become the same. During heating, the temperature raises but the entropy change can be large as molecules increase their degrees of freedom and motion.
Learn more about entropy at https://brainly.com/question/30481619
#SPJ11
How many moles of NH3 is produced from 4.8 mol of H₂
N₂ + 3H₂ = 2NH3
How much hydrogen (in kg) is needed to yield 907 kg of ammonia by the Haber process?
From the balanced equation, we know that 3 moles of H₂ produces 2 moles of NH₃.Therefore, to find the moles of NH₃ produced from 4.8 moles of H₂, we can set up a proportion 3 moles H₂ / 2 moles NH₃ = x moles H₂ / 4.8 moles H₂.
What is a moles ?In chemistry, mole is a unit of measurement used to express amounts of a chemical substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12, which is approximately 6.022 x 10^23 entities. This number is known as Avogadro's number, and it is a fundamental constant in chemistry.
Moles are used to quantify chemical reactions and calculate the amount of reactants needed to produce a certain amount of product, or the amount of product that can be obtained from a given amount of reactants.
To know more about moles visit :
https://brainly.com/question/26416088
#SPJ1
what is the ph at the equivalence point in the titration of a 23.4 ml sample of a 0.427 m aqueous nitrous acid solution with a 0.494 m aqueous potassium hydroxide solution?
The pH at the equivalence point in the titration of a 23.4 mL sample of a 0.427 M aqueous nitrous acid solution with a 0.494 M aqueous potassium hydroxide solution is 7.00.
What is titration?Titration is a chemical analysis method that measures the amount of a chemical compound in a solution by using a standard solution (a solution of known concentration).
Titration can be used to determine the concentration of an unknown solution, the quantity of a particular substance in a sample, or the identity of a substance. Titration is frequently utilized in chemistry labs to test acid or base solutions' strength.
Titration calculations involve the use of formulas that relate the concentration of the standard solution to the concentration of the unknown solution. Acid-base titration, which measures the concentration of an acidic or basic solution, is one of the most popular types of titration.
The pH at the equivalence point in the titration of a 23.4 mL sample of a 0.427 M aqueous nitrous acid solution with a 0.494 M aqueous potassium hydroxide solution is 7.00 because nitrous acid (HNO2) is a weak acid with a Ka value of 4.5 x 10-4. At the equivalence point, the quantity of moles of the potassium hydroxide solution added is equal to the quantity of moles of the nitrous acid solution. The pH of the solution is determined by the salt produced during the titration's neutralization reaction.
The salt produced during this titration is potassium nitrite (KNO2), which is a salt of a strong base and a weak acid. When dissolved in water, potassium nitrite undergoes hydrolysis and produces a solution with a pH of about 7.00. As a result, at the equivalence point, the pH of the solution is 7.00.
Learn more about titration: https://brainly.com/question/186765
#SPJ11
