Which is more acidic among the following?​

Answer:

I think it's a sulphate ion, because when you add hydrochloric acid to it it produces bubbles and when you add barium chloride it then produces a white precipitate.its formula is SO4

I hope this helps

The heat of hydration is defined as the heat absorbed or evolved when one mole of a substance undergoes hydration. The heat of solution is the enthalpy change associated with he dissolution of a solute. The lattice energy is the heat. Lattice energy is the energy released when the components of the lattice are brought together from infinity.

Hence the heat of solution for LiF → Li^+ + F- is -1966  kJ/mol

Given that;

Heat of hydration = ΔH solution – ΔH lattice energy

Where,

ΔH solution  = Heat of the solution

ΔH lattice energy = Lattice energy of the solution

The heat of solution or enthalpy of dissolution is defined as the enthalpy change associated with the dissolution of a solute in a solvent

From the formula above;

ΔH solution = Heat of hydration + ΔH lattice energy

Heat of hydration = [(-431) + (-499)] = -930 kJ/mol

ΔH solution = (-930) + (-1,036) = -1966  kJ/mol

Hence the heat of solution for LiF → Li^+ + F- is -1966  kJ/mol

https://brainly.com/question/13526282

Answer:

62.5 moles of O₂.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2C₈H₁₈ + 25O₂ —> 16CO₂ + 18H₂O

From the balanced equation above,

2 moles of C₈H₁₈ reacted with 25 moles of O₂.

Finally, we shall determine the number of mole of O₂ needed to react with 5 moles of C₈H₁₈. This can be obtained as shown below:

From the balanced equation above,

2 moles of C₈H₁₈ reacted with 25 moles of O₂.

Therefore, 5 moles of C₈H₁₈ will react with = (5 × 25) / 2 = 62.5 moles of O₂.

Thus, 62.5 moles of O₂ is needed for the reaction.

Answer:

Any substance that contains only one kind of an atom is known as an element. Because atoms cannot be created or destroyed in a chemical reaction, elements such as phosphorus (P4) or sulfur (S8) cannot be broken down into simpler substances by these reactions.

Example: Water decomposes into a mixture of hydrogen and oxygen when an electric current is passed through the liquid. Hydrogen and oxygen, on the other hand, cannot be decomposed into simpler substances. They are therefore the elementary, or simplest, chemical substances - elements.

Each element is represented by a unique symbol. The notation for each element can be found on the periodic table of elements.

The elements can be divided into three categories that have characteristic properties: metals, nonmetals, and semimetals. Most elements are metals, which are found on the left and toward the bottom of the periodic table. A handful of nonmetals are clustered in the upper right corner of the periodic table. The semimetals can be found along the dividing line between the metals and the nonmetals.

Explanation:

Answer:

the reactants are carbon dioxide ,iron, oxygen

Solution:-1

[tex]\\ \sf\longmapsto E=hv[/tex]

Solution:-2

[tex]\boxed{\sf \lambda=\dfrac{c}{v}}[/tex]

[tex]\\ \sf\longmapsto v=\dfrac{c}{\lambda}[/tex]

[tex]\\ \sf\longmapsto v=\dfrac{3\times 10^8m/s}{3000\times 10^{-10}m}[/tex]

[tex]\\ \sf\longmapsto v=0.001\times 10^{18}s^{-1}[/tex]

[tex]\\ \sf\longmapsto v=1.0\times 10^{15}s^{-1}[/tex]

Now

[tex]\\ \sf\longmapsto E=hv[/tex]

[tex]\\ \sf\longmapsto E=6.626\times 10^{-34}Js\times 1.0\times 10^{15}s^{-1}[/tex]

[tex]\\ \sf\longmapsto E=6.6\times 10^{-19}J[/tex]

Explanation:

here's the answer to your question

Which of the following statements best explains the trends in boiling points?

A. The atomic size increases down the group, and this decreases the strength of the intermolecular forces.

                                           A is incorrect

B. The total number of electrons decreases down the group, and this decreases the strength of the intermolecular forces.

                                            B is incorrect

C. The total number of electrons increases down the group, and this increases the strength of the intermolecular forces.

                                             C is correct

D. The chances of forming a permanent dipole increases down the group, and this increases the strength of the intermolecular forces.

                                              D is incorrect

The boiling point increase down a group because the total number of electrons increases down the group, and this increases the strength of the intermolecular forces. Hence option C is correct.

Boiling point of a substance is the temperature at which the substance changes from its liquid state to vapour state. Boiling point of a molecule or compounds depends on the bond type, molecular weight, temperature and pressure.

For ionic compounds, boiling point will be higher since ionic bonds are stronger than covalent compounds. There is a periodic trend for the physical properties such as boiling point for elements in periodic table.

Down a group, the number of electrons increases and the atomic size also as well as the ionic character increases down a group . These two facts leads to higher intermolecular attraction, thus more temperature have to applied to weaken the bonds.

Higher temperature to be applied means the boiling point of the substance is higher. Therefore, boiling point down a group increases because of the higher intermolecular attraction as said in option C.

To find more about boiling point, refer the link below:

https://brainly.com/question/2153588

#SPJ1

Explanation:

it is that when an object is moving 25 m per sec to calculate its time we can simply divide 1.5 by 25 and multiply by 1

Answer:

I hope that the link above will be helpful

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

[tex]\boxed{\pmb{\green{\sf{2Mg +H_{2}SO_{4}\dashrightarrow H _{2}+Mg_{2}SO_{4}}}}}[/tex]

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Answer:

a. 1 x 10^-35

Explanation:

The correct compound given is: [tex]\mathsf{Cu_3(AsO_4)}_2[/tex]

To predict the approximate Ksp value of the given compound, we will need to express the oxidation-reduction half-reaction of the compound and its dissociation, then, we will use the Nernst equation to determine the approximate Ksp value.

To start with the reduction half-reaction:

[tex]\mathsf{Cu_3(AsO_4)_{2}(s) + 6e^- \to 2As O_{4}^{3-}_{(aq)}+3Cu(s) }[/tex]

The oxidation half-reaction is:

[tex]\mathsf{3Cu(s) \to 3CU^{2+}_{(aq)} + 6e^-}[/tex]

The overall cell reaction now is:

[tex]\mathsf{Cu_3(AsO_4)_{2}(s) \to 3Cu^+ (aq) + 2As O_{4}^{3-}_{(aq)} }[/tex]

From the reduction half-reduction, the number of moles of electrons (n) transferred is 6 moles.

By applying the Nernst equation:

[tex]\mathsf{E_{cell} = E^0_{cell} -\dfrac{0.0591V}{n}log [Cu^{2+}]^3[AsO_4^{3-}]^2 }[/tex]

At standard conditions;

The standard cell potential [tex]\mathsf{E^0_{cell} = -0.342 \ V}[/tex]

and [tex]\mathsf{E_{cell} = 0 \ V}[/tex] since it is at equilibrium.

∴

[tex]\mathsf{0 = -0.342 -\dfrac{0.0591V}{6}log [Cu^{2+}]^3[AsO_4^{3-}]^2 } \\ \\ \\ \mathsf{0.342 = -\dfrac{0.0591V}{6}log [Cu^{2+}]^3[AsO_4^{3-}]^2 }[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 = \dfrac{-(0.342)*6}{0.0591 }}[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 = -34.7}[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 \simeq -35}[/tex]

[tex]\mathsf{[Cu^{2+}]^3[AsO_4^{3-}]^2 = 10^{-35}}[/tex]

[tex]\mathbf{K_{sp} = [Cu^{2+}]^3[AsO_4^{3-}]^2 = 1\times 10^{-35}}[/tex]

Answer:

Gases expand the most upon heating because the intermolecular space is more than in solids or liquids.

Explanation:

hopes it helps

Answer: Newton's Third Law of Motion.

Explanation:

Newton's Third Law of Motion simply states that every action force creates a reaction force and then, this reaction force will be equal in strength and opposite in direction.

The statement simply implies that in every interaction, there will be a pair of forces that is acting on the two interacting objects. An example of Newton's third law of motion can be seen when a person jumps, thenlegs of the person will apply a force to the ground which will then propel the person into the air.

Same molecular structure and same properties.

Molecular structure is three dimensional structure in which arrangement of atoms is placed.

The molecular structure of a compound determines the polarity and its reactivity.

The different states of matter solid, liquid and gas have different molecular structure and different properties from each other.

The molecular structure of a molecule will have same properties as of the entire molecule based on its state.

Learn more at https://brainly.com/question/24325752

Answer:

the location of atoms, groups, or ions relative to one another and the number, type, and location of covalent bonds

Answer:

I could be wrong letter c

Answer: broooo what is this

Explanation:

Answer:

Create a new account as the thing you're experiencing now is due to the fact that Brainly had blocked your account.

Answer:

Increasing the temperature

Increasing particle size

Explanation:

Increasing the temperature allows for particles and molecules to move faster (because there is an increase in energy) and allows for more collisions.

∴ Increasing the temperature would be an answer.

Increasing the particle size allows for more surface area and a greater chance for particles to collide with each other.

∴ Increasing particle size would be an answer.

Topic: AP Chemistry

Unit: Kinetics

Answer:

We are given that the ring is made up of 20 carrat gold. 20 carrat gold means 20 parts of gold and 4 parts of other metal (usually copper or silver). Thus, the percentage of gold in 20 carrat gold will be

= (20 / 24) X 100

= 83.333 %

We can now calculate the mass of gold in the ring. We are given that the ring weighs 300 mg. So, the mass of gold in ring will be

= (83.333 / 100) X 300

= 250 mg

Thus, the mass of gold in 300 mg of the ring is 250 mg.

Now the molar mass of gold is 197 g. This means that there are 6.023 X 1023 atoms of gold in 197g of gold. Thus

197g of gold = 6.023 X 1023 atoms of gold

1g of gold = (6.023 X 1023 ) / 197 atoms of gold

250 mg or 0.25g of gold = (6.023 X 1023 X 0.25) / 197 atoms of gold

= 7.643 X 1020 atoms of gold

Answer: The given amount of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 0.430 moles of Cd, 0.860 moles of N and [tex]2.59\times 10^{23}[/tex] molecules of water.

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of [tex]Cd(NO_3)_2.4H_2O[/tex] = 132.4 g

Molar mass of [tex]Cd(NO_3)_2.4H_2O[/tex] = 308.5 g/mol

Plugging values in equation 1:

[tex]\text{Moles of }Cd(NO_3)_2.4H_2O=\frac{132.4g}{308.5g/mol}=0.430 mol[/tex]

1 mole of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 1 mole of Cd, 2 moles of nitrogen atom (N), 10 moles of oxygen atom (O) and 8 moles of hydrogen atom (H).

So, 0.430 moles of [tex]Cd(NO_3)_2.4H_2O[/tex] will contain = [tex](1\times 0.430) = 0.430mol[/tex] of Cd and [tex](2\times 0.430)=0.86mol[/tex] of N

According to the mole concept:

1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules

So, 0.430 moles of [tex]Cd(NO_3)_2.4H_2O[/tex] will contain = [tex]\frac{6.022\times 10^{23}}{1mol}\times 0.430mol=2.59\times 10^{23}[/tex] number of water molecules.

Hence, the given amount of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 0.430 moles of Cd, 0.860 moles of N and [tex]2.59\times 10^{23}[/tex] molecules of water.

The correct answer is D ... and if the answer was added to the word "explode" .. it would have been more correct .

Answer:

67.3g

Explanation:

%(w/w) = mass of solute/total mass of solution × 100

According to this question, an aqueous solution contains 32.7% KCl (w/w%). Firstly, we find the mass of the solute (KCl) as follows, if the mass of solution is 100g:

32.7 = mass of solute/100 × 100

mass of solute (KCl) = 32.7g

Mass of solution = mass of solvent (water) + mass of solute (KCl)

100g = x + 32.7g

x = 100 - 32.7

x = 67.3

Hence, the mass of water contained in the 100g solution is 67.3g.

Answer:

A

Explanation:

the nervous system helps parts of the body communicate.through nerves.

I hope this helps

Answer:

Answer: Atoms of chlorine (CI) and magnesium (Mg)

Answer: Atoms of chlorine (CI) and magnesium (Mg)is your answer

Answer:

They show helixes and proteins

Explanation:

Ribbon diagrams are the Richardson diagrams that represent the protein structures. Chemist prefers using Ribbon diagrams to show the various structure of the proteins.

The Ribbon diagram is used to represent the structural organization of the protein in the polypeptide chains or individually. It shows the three-dimensional structure and organization of the protein framework.

The ribbon diagram for the secondary structure of the protein shows the intramolecular and intermolecular structure along with helixes and bonding. It shows the detailed structure of the protein organization including the helix and sheets.

Therefore, the ribbon diagram is used by chemists to determine the structure of the protein as they give the details about the helix and sheet.

Learn more about ribbon diagrams, here:

https://brainly.com/question/2794632

#SPJ2

Explanation:

Your search - What is the answer to 9.7300x10^2+9.8700x 10^3 1.0843x 10^ in scientific notation - did not match any documents.

Suggestions:

Make sure that all words are spelled correctly.

Try different keywords.

Try more general keywords.

Try fewer keywords.

Answer:

27.79 g to the nearest hundredth.

Explanation:

2Na + Cl2 ---> 2NaCl

Using the molar masses , the theoretical yield is:

46 g of Na yields  46 + 35.5*2 g NaCl

46 g ---> 117 g NaCl  so

11.5 g ----> 117 * 11.5 / 46 g NaCl

But, as the yield is 90%

the actual yield is 0.95 * 117 * 11.5 / 46

= 27.79 g.