Answer:
A typical characteristic of a single-replacement reaction is that there is one element as a reactant and another element as a product. will not because bromine is below fluorine on the periodic table. This is just one of many ways the periodic table helps us understand chemistry.
Explanation:
hope it will help u......
Answer: Freezing point depression
Explanation:
freezing point depression is a phenomenon that describes why adding a solute or solvent results in the lowering of the freezing point of the solvent
Water glass is found in
A. Liquid form at room temperature
B. solid state at room temperature
c. semi liquid form at room temperature
D. None of above
Answer:
liquid form
Explanation:
am i right? if right like
Answer:
semi-liquid at room temperature
Define physical and chemical properties, provide three examples of each, discuss their reversibility, and explain the fundamental differences between them.
Answer:
Physical properties are defined as the properties which can be observed without changing its chemical composition.
For example: color, volume, and molecular weight.
Chemical properties are defined as the properties which can be observed only after changing chemical identity of the substance.
For example: reactivity, toxicity, and flammability.
The fundamental differences between physical and chemical properties are as follows:
Chemical properties are related to chemical bonds of the substance while physical properties are not.
In chemical properties, chemical identity of substance changes while physical properties do not have any change.
Chemical properties predict the reaction of substance while physical properties only describe the appearance of the substance.
Explanation:
Answer:
A measurable property that can be observed typically and explains any matter or organism's appearance and physical behavior is called a physical property. Examples of physical properties are appearance, boiling point, freezing point, melting point, colors, odor, mass, density, solubility. Properties that are only observed during a reaction or change in the composition of a matter is called a chemical property. These properties describe the internal part of anything and explain how it behaves when reacted with other chemical substances. Examples are enthalpy, entropy, reactivity, flammability, oxidation state, acidity, basicity. Some physical properties are reversible or sometimes irreversible. Like the change of states of matter is reversible, and the growth of an organism is irreversible. The same thing with the chemical properties. There are reversible chemical reactions(formation of ammonium chloride) and irreversible chemical reactions. (burning of a chemical substance). After knowing all about these properties, the most fundamental difference is that the physical properties can be measured without any chemical change in them. But a chemical property is measurable when the substance goes through a chemical reaction.
Explanation:
Complete combustion of a 0.350 g sample of a compound in a bomb calorimeter releases 14.0 kJ of heat. The bomb
calorimeter has a mass of 1.20 kg and a specific heat of 3.55 J/(g;°C).
If the initial temperature of the calorimeter is 22.5°C, what is its final temperature?
Use 0= mCOAT
Answer:
i cant understand what you wrote
Explanation:
it's a blank screen
value of MA is always lesser thàn 1 why?
Answer:
because the load arm is greater than the effort arm. As we know that when the load arm is greater than the effort arm, the mechanical advantage will always be lesser than one, which results in gain in speed
differentiate between Physical and chemical changes
Answer:
In a physical change the appearance or form of the matter changes but the kind of matter in the substance does not. However in a chemical change, the kind of matter changes and at least one new substance with new properties is formed.
I HOPE THIS WILL HELP YOU IF NOT THEN SORRY HAVE A GREAT DAY:)why are structural formulas good for depicting polymers?
Answer:
Structur formulas are good for depicting polymers because they explain the properties and structure of the compound which empirical and molecular formulas cannot always represent.
Hope it helps you.Structural formulas describe the bonds shared by the elemental atom. They are good for depicting polymers as they describe the structure and the properties.
What are polymers?Polymers are said to be substances that are either natural or synthetic and are macromolecules made of various chains of monomers joined together.
The actual structure and arrangement of the atoms in the polymers are depicted by the structural formula. These were not explainable by the empirical, or molecular formulas.
The atoms involved and the linkage between them are described through the structures and allow us to know the certain properties of the monomers involved. It gives the idea of the chemical and physical properties.
Therefore, the structural formulas depict the polymer.
Learn more about polymer, here:
https://brainly.com/question/17638582
#SPJ2
The atomic mass of calcium is calculated by adding the mass (amount) of
A) Protons and Electrons
B) Protons and Neutons
C) Electrons and Neutons
D) Protons and Protons
Answer:
B. Protons and Neutrons
Answer:
Option"B" is correct.
MARK ME BRAINLISTS
A car of 1200 kg is moving with a speed of 36 Km/hr. It is stopped by applying brakes withion with in 5 seconds. Calculate the amount of force required to stop the car.
Answer:
–2400 N
Explanation:
This is a physics question. However, the answer to the question is given below.
We'll begin by converting 36 Km/hr to m/s. This can be obtained as follow:
3.6 Km/hr = 1 m/s
Therefore,
36 Km/hr = 36 Km/hr × 1 m/s / 3.6 km/hr
36 Km/hr = 10 m/s
Thus, 36 Km/hr is equivalent 10 m/s.
Next, we shall determine the acceleration of the car. This can be obtained as follow:
Initial velocity (u) = 10 m/s
Final velocity (v) = 0 m/s
Time (t) = 5 s
Acceleration (a) =?
a = (v – u) / t
a = (0 – 10) / 5
a = – 10 / 5
a = –2 m/s²
Finally, we shall determine the force required to stop the car. This can be obtained as follow:
Mass (m) = 1200 Kg
Acceleration (a) = –2 m/s²
Force (F) =?
F = ma
F = 1200 × –2
F = –2400 N
NOTE: The negative sign indicate that the force is in opposite direction to the motion of the car.
how can we separate the sugar from sugar solution
what is meant by reaction element
Answer: A reaction element are those elements that can take part in a chemical reaction.
Explanation:
An element is made up of atoms that has the same atomic number. It is the basic material of which all matter is composed of. These elements cannot be broken down further into smaller substances by any chemical reaction. Each element has a unique number of protons in its atom. For example,
--> a hydrogen atom has 1 proton,
--> a Helium atom has 2 protons,
--> a Lithium atom has 3 protons, and
--> a carbon atom has 6 protons.
A chemical reaction on the other hand involves rearrangement of the constituent atoms of reactants to create different substances as products. The bonds between atoms are either broken or created to form new molecules. There are different types of chemical reaction which includes:
--> Decomposition reaction
--> Neutralization reaction
--> single displacement reaction and
--> combustion reaction.
por que existen diferencias en el consumo del agua de las personas?
Las diferencias entre el consumo de agua existen debido a que varios factores externos inciden en este proceso de ingesta de agua.
El agua es un compuesto químico que es vital para la vida de los seres vivos. En el caso de los humanos es necesario tomar agua para evitar la deshidratación y activar muchos procesos naturales del cuerpo.
La cantidad de agua que debe tomar un humano depende de varios factores como:
La temperatura del lugar en el que esté, si está en un lugar con mayor temperatura la sudoración hará que requiera más agua.La cantidad de actividad física que realiza, entre más actividad física se eliminan más líquidos corporales por medio del sudor.La salud, cuando tiene alguna enfermedad como diarrea o vómito puede perder líquido más rápidamente.Embarazo y lactancia, las mujeres en estado de embarazo y lactancia deben tomar más agua dado que un porcentaje del agua de su cuerpo se va para el consumo de su hijo.Incluso la cantidad de agua de agua puede variar dependiendo del peso de cada persona, aquellas personas que pesan más deben beber más agua, que aquellas que tienen menor peso debido a que la cantidad de agua debe ser proporcional a su peso.
Learn more in: https://brainly.com/question/14400140
Imagine a substance that is a red, shiny solid at room temperature, with a melting point of 115 °C. It is brittle and a poor conductor of heat. State whether this substance is a metal or a non-metal. Give a reason for your answer.
Explanation:
Metals and non-metals can be identified either by their position in the periodic table or by their properties.
he metal elements are found on the left hand side of the periodic table, and the non-metal elements are found on the right. You can imagine a zig-zag line, starting at B-Al-Si, separating metals from non-metals.
Dissolve 27.2 grams of CaO and Fe203 mixture with an excess of 500ml dd HCl 2M. a) Calculate each substance in the original mixture b) Calculate the mass of each anhydrous salt obtained after the reaction
Answer:
nutrion jsbsjsb. wjjshsjs. wjsh
Which statement describes the periodic law?
Help please now!
Answer:
Answer is: elements in the same group have similar chemical properties. Periodic law is the arrangement of the elements in order of increasing atomic number.
Determine the grams of sodium chloride produced when 10 g of sodium react with 10 grams chlorine gas according to the equation 2Na + Cl2 = 2 NaCl
Answer:
16 g
Explanation:
Step 1: Write the balanced equation
2 Na + Cl₂ ⇒ 2 NaCl
Step 2: Identify the limiting reactant
The theoretical mass ratio (TMR) of Na to Cl₂ is 46:71 = 0.65:1.
The experimental mass ratio (EMR) of Na to Cl₂ is 10:10 = 1:1.
Since EMR > TMR, Cl₂ is the limiting reactant
Step 3: Calculate the mass of NaCl produced
The theoretical mass ratio of Cl₂ to NaCl is 71:117.
10 g Cl₂ × 117 g NaCl/71 g Cl₂ = 16 g NaCl
what are the useful of carbon dioxide?
The velocity of an electron that is emitted from a metallic surface by a photon is 3.6E3 km*s^-1. (a) What is the wavelength of the ejected electron? (b) No electrons are emitted from the surface of the metal until the frequency of the radiation reaches 2.50E16 Hz. How much energy is required to remove the electron from the metal surface? (c) What is the wavelength of the radiation that caused photoejection of the electron? (d) What kind of electromagnetic radiation was used?
(a) The wavelength of the electron is 202.25885 nm
(b) The minimum energy required to remove the electron is 1.6565 × 10⁻¹⁷ J
(c) The wavelength of the causing radiation is approximately 8.84 nm
(d) X-ray
The question parameters are;
The given parameters of the electron are;
The velocity of the electron, v = 3.6 × 10³ km/s
(a) de Broglie wavelength is given as follows;
λ = h/(m·v)
Where;
λ = The wavelength of the wave
h = Planck's constant = 6.626 × 10⁻³⁴ J·s
m = The mass of the electron = 9.1 × 10⁻³¹ kg
Therefore, we get;
λ = 6.626 × 10⁻³⁴/(9.1 × 10⁻³¹ × 3.6 × 10⁶) = 202.25885 × 10⁻⁶
The wavelength, λ, of the electron is 202.25885 × 10⁻⁶ m = 202.25885 nm
(b) The energy required to remove the electron from the metal surface is known as the work function, W₀, which is given by the following formula
W₀ = h·f₀
Where;
f₀ = The threshold frequency
Given that the threshold frequency, f₀ = 2.50 × 10¹⁶ Hz, we have;
W₀ = 6.626 × 10⁻³⁴ J·s × 2.50 × 10¹⁶ Hz = 1.6565 × 10⁻¹⁷ J
The energy required to remove the electron from the metal surface, W₀ = 1.6565 × 10⁻¹⁷ J
(c) The wavelength of the radiation that caused the photoejection of the electron is given as follows;
The energy of the incoming photon, E = W₀ + (1/2)·m·v²
Where;
v = The velocity of the electron, and m = The mass of the electron
Therefore;
E = 1.6565 × 10⁻¹⁷ + (1/2) × 9.1 × 10⁻³¹ kg × (3.6 × 10⁶ m/s)² = 2.24618 × 10⁻¹⁷ J
We have;
E = h·f
∴ f = (2.24618 × 10⁻¹⁷ J)/(6.626 × 10⁻³⁴ J·s) = 3.38994869 × 10¹⁶ Hz
The speed of light, c = 299,792,458 m/s
From the equation for the speed of light, we have;
λ = c/f
∴ λ = (299,792,458 m/s)/(3.38994869 × 10¹⁶ Hz) = 8.84356919 nm ≈ 8.84 nm
The wavelength of the radiation that caused photoejection of the electron, λ[tex]_{causing \ radiation}[/tex] ≈ 8.84 nm
(d) The kind of electromagnetic radiation used which has a wavelength of 8.84 nm is the X-Ray which are electromagnetic radiation having wavelengths that extend from 10 picometers to 10 nanometers.
Learn more about De Broglie wavelength here;
https://brainly.com/question/19131384
(True or false) Two or more atoms combine to form a molecule ____
Answer:
false tjytyjiy
Explanation:
cnruujrkyrryyrkkurk
Which statement is true about percent yield
what’s the name of the organic molecule
Answer:
hexane
Explanation:
This is a 6- carbon hydrocarbon with no multiple bonds or any functional groups (such as -OH). Thus, the prefix 'hex' refers to the 6 carbons and 'ane' refers to the molecule being an alkane.
Naming molecules:
Number of carbons
• pentane: 5 carbons
• hexane: 6 carbons
• heptane: 7 carbons
• octane: 8 carbons
• nonane: 9 carbons
Functional groups (for 6- carbons molecules)
• Alkene (C=C): hexene
• Alcohol (-OH): hexanol
• Alkyne (C≡C): hexyne
why does increasing the pressure of a gas increase the reaction rate?
A. it increases the temperature of the gas.
B. it increases the reaction-rate constant.
C. it increases the activation energy.
D. if increases the number of collisions
Answer:
d it increase the number of collisions
Explanation:
cos collision is a type reaction to other particles
Hope that helps you
Please follow
Option A may be I think!!!!!
What is the concentration of a solution formed by diluting 25.0 ml of a 3.8M glucose solution to 250ml
Explanation : số mol glucose 3.8M là :
n = Cm . V = 3.8 . 25 =95
=> Cm khi pha loãng = [tex]\frac{n}{V}[/tex] = [tex]\frac{95}{250}[/tex] = 0.38M
According to molar concentration, the concentration of a solution formed by diluting 25.0 ml of a 3.8 M glucose solution to 250 ml is 0.38 M.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of 2 solutions given it is calculated as M₁V₁=M₂V₂,on substitution, M₂=3.8×25/250=0.38 M.
Thus, the concentration of a solution formed by diluting 25.0 ml of a 3.8 M glucose solution to 250 ml is 0.38 M.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ5
the element of group 1 are reactive but those of group 18 are inert, why
Answer:
Because elements of group 1 does not have stable electronic configuration and elements of group 18 have stable electronic configuration.
Explanation:
Because elements of group 1 do not contain stable electronic configuration and elements of group 18 include stable electronic configuration.
What are the element of group 1?Group 1 elements contain the alkali metals, Li, Na, K, Rb, Cs, and Fr. The alkali metals exist all soft, shiny, and metallic when cut. They react efficiently with water, have low melting points and densities, and are good conductors of electricity. They all include one valence electron that they lose easily to form ions. Noble gas exists as any of the seven chemical elements that create up Group 18 (VIIIa) of the periodic table. The elements exist as helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn), and oganesson (Og).
The element of group 1 exist as reactive but those of group 18 exist as inert Because elements of group 1 do not contain stable electronic configuration and elements of group 18 include stable electronic configuration.
To learn more about element of group1 refers to:
https://brainly.com/question/2116245
#SPJ2
4. Calculate the relative molecular masses of the following substances [RAM: H=1, O=16, S=32, C=12, N=14] a. CH2(NH2)COOH b. H2SO4
Answer:
a. CH2(NH2)COOH
[tex]molecular \: mass = (12 \times 2) + (5 \times 1) + (14 \times 1) + (16 \times 2) \\ = 24 + 5 + 14 + 32 \\ = 75 \: grams[/tex]
b. H2SO4
[tex]molecular \: mass = (2 \times 1) + 32 + (16 \times 4) \\ = 2 + 32 + 64\\ = 98 \: grams[/tex]
Calculate the amount of mole(s) of CoF2 required to react with 12.8 moles of HCI.
CoCl2 + 2HF --> CoF2 + 2HCI
Explanation:
here's the answer to your question
If 16.4 grams of calcium nitrate is heated as shown in the reaction:
2Ca(NO3)2 -> 2CaO + 4NO2 + O2.
Calculate the volume of nitrogen dioxide produced at STP.
Answer:
7.2
Explanation:
you first have to find the number of moles of nitrogen dioxide by using the number of moles for calcium nitrate and the mole to mole ratios
number of moles of calcium nitrate=mass/mm
=16.4/102
=0.16g/mol
then you use the mole to mole ratios
2 : 4
0.16: x
2x/2=0.64/2
x=0.32g/moles of nitrogen dioxide
then you use the formula for the volume
v=22.4n
=22.4×0.32
=7.2
I hope this helps
All three states of matter can be ____________ or a solvent in a solution.
why is unit of pressure called a derived unit ?? 2) how do you measure the volume of milk?
1. Unit of pressure called a derived unit because it is a combination of base units (kg·m^-1·s^·2).
2. We measure the volume of milk by a instrument called Milk Lactometer.
2500m into kilometer
1 meter = 1000 km
2500 meter = 2500/1000 km
= 2.5 km
